Abstract: Obstructive Sleep Apnea(OSA) is breathing disorder syndrome in which the airway tract pauses during sleep due to collapse of pharyngeal airway. It is occurred at the sleep time, with fourth dimensional high resolution in airway tract Obstruction in children and adults with OSA. Here, we the operator places the seeds that includes the Oesopharyngeal air tract and found out a threshold for the first frame in order to determine the affected tissues which blocks the patients pharyngeal tract. In this (...) automated segmentation method it shows the process of MRI studies of the pharyngeal air pathway and enable diagnose of obstructive tissues with the collapse tissues. Region growing method results well in Dice Coefficients compared with manual segmentation. It automatically detects 90% of collapse tissues. This approach leads to segment the pharyngeal pathway correctly. It uses long MRI scans in order to diagnosis the collapsed tissues with graph, accurate details and coefficients in a short span of duration. (shrink)

Abstract: In his poem, ‘Ambassadors of Poverty’, Philip Umeh satirises the sins of corruption by the State agents against the state and the populace. Ambassadors of poverty are those leaders and their subjects, the elites and the masses, that pervert all kinds of ill-acts that erode the State unceasingly. The impoverished masses are forced by circumstances to indulge in corruption. The Nigerian (African) leaders also promote neo-colonialism, which under-develops the State. All ill-acts are sins, here, sins against the State – (...) Nigeria. All hands must be on deck to achieve the transformation envisaged by the poet, now and later. Crimes against the State constitute the poet’s burden in numerous ways. Besides Umeh’s poem, several other secondary sources were employed for a qualitative-based content-analysis and review. (shrink)

Background : Menopause is an important period of women life .it is a normal physiological process, defined as the permanent cessation of menses for 12 months or more. Our study assess the awareness and perception of Saudi women aged from 30 to 65 years towards menopause and to Address the health needs of women to improve the quality of life of menopausal Saudi women. Methods: Cross sectional study by using survey distributed electronically through kingdom of Saudi Arabia for Saudi women (...) between ages of 30-65 years old. Results: The number of participant were total of 738 women, 130 women were menopause already. Most of participant were from southern region (67%). Study shows that 51-55 years old is the average age of menopause. Our participant (41.9%) they choose the answer of “inability of ovary to produce egg “as definition of menopause while (17.6 %) choose “cessation of mensuration for more than 1 year), most of women (31.9 %) they though that psychological symptoms will be more prominent with significant p value (0.003), while among menopause group they choose hot flush as the most prominent symptoms (38.5%). About 70% of our sample they mention that they don’t have enough background about menopause. Conclusion: Heath education with proper medical advices should be a part of primary health clinics projects. Media and menopause groups play important role to help health providers . (shrink)

Abstract— In parallel to developing technology, demand for more energy makes us seek new energy sources. Wind and solar energy are the most popular ones owing to their abundance, ease of availability and convertibility to electric energy. This work covers realization of a hybrid renewable energy system. The scheme involves conversion of solar power and wind power into usable electrical energy using solar panel and by designing a wind turbine with appropriate calculations and specifications. Battery in this system is charged (...) by both solar and wind power, the DC output is then converted to AC using an inverter and fed to the load. The idea of water conservation through rain water collection and storage with the use of solar panel is also implemented. The main aim of the design is to create a system suitable to provide continuous power by utilization of non-conventional energy resources and making use of the additional advantage of the solar panel in the conservation of water. Power resources and load in the system are monitored and controlled in real time. (shrink)

Abstract— Waste Polyvinyl chloride-bitumen composites were prepared in the molten state by addition waste PVC pipes to commercial bitumen in different concentrations. The original material of the pure bitumen and bitumen composites are rheologically characterized. The viscoelastic properties such as shear compliance, torque and viscosity were measured and compared. These properties were studied using an ARES- Rheometer (Rheometric Scientific, Co.) equipment. The measurements were performed in the dynamic mode, plate-plate geometry of 25 mm diameter over the temperature range from –10 (...) to 60°C and angular frequency, varied from 102 to10-1 radian/s. The results are compared at reference temperatures10 and 60°C over a wide range of . The results evidence that the incorporation of the waste PVC into bitumen enhances the dynamic viscosity. The results evidence that the incorporation of the waste PVC into bitumen enhances the torque and the viscosity. So, the stability of the bitumen composites is more noticeable at 60°C. (shrink)

Abstract— Waste Polyvinyl chloride-bitumen composites were prepared in the molten state by addition waste PVC pipes to commercial bitumen in different concentrations. The original material of the pure bitumen and bitumen composites are rheologically characterized. The viscoelastic properties such as shear compliance, torque and viscosity were measured and compared. These properties were studied using an ARES- Rheometer (Rheometric Scientific, Co.) equipment. The measurements were performed in the dynamic mode, plate-plate geometry of 25 mm diameter over the temperature range from –10 (...) to 60°C and angular frequency, varied from 102 to10-1 radian/s. The results are compared at reference temperatures10 and 60°C over a wide range of . The results evidence that the incorporation of the waste PVC into bitumen enhances the dynamic mechanical moduli and the viscosity. The moduli were found to rise with increasing the waste PVC content. The stability of the bitumen blends is more noticeable at 60°C as confirmed by the results. (shrink)

Abstract: Online book review platforms generate vast user data, making accurate rating prediction crucial for personalized recommendations. This research explores neural networks as simple models for predicting book ratings without complex algorithms. Our novel approach uses neural networks to predict ratings solely from user-book interactions, eliminating manual feature engineering. The model processes data, learns patterns, and predicts ratings. We discuss data preprocessing, neural network design, and training techniques. Real-world data experiments show the model's effectiveness, surpassing traditional methods. This research can (...) enhance user experience, book catalog organization, and aid publishers, simplifying recommendation processes and providing tailored suggestions based on user preferences. (shrink)

Abstract: In this work, polystyrene/waste tires composites were prepared by incorporating of waste tires into polydisperse commercial polystyrene in a melt-mixing method. The rheological characterization of PS and PS/composite have been studied and compared. These properties were studied using ARES-Rheometer under nitrogen atmosphere in parallel plate geometry with diameter 8 mm. The measurements are carried out over a wide range of temperatures ranged from 120°C to 220°C and frequencies from 100 to 0.1 radians per second. The complex modulus (G*) were (...) evaluated and compared with those of unfilled PS. The dynamic mechanical properties and stability at elevated temperatures were found to increase with the addition of waste tires to PS as confirmed by the results. The results showed that the value of G* at  = 1.0 radian/s is 1.8104 and 4.4104 Pa for PS and PS/waste tires, respectively. This difference rises at low frequencies-branch to be the value of G* at  = 0.06 radian/s is 8.8102 and 7.8103 Pa for PS and PS/waste tires, respectively. Generally G* increases by the addition of rubber as filler for PS . (shrink)

Abstract: In this work, polystyrene/waste tires composites were prepared using the melt-mixing method. The viscoelastic properties of PS and PS/composite have been evaluated and compared. These properties were studied using ARES-Rheometer under nitrogen atmosphere in parallel plate geometry with diameter 8 mm. The measurements are carried out over a wide range of temperatures ranged from 120°C to 220°C and frequencies from 100 to 0.1 radians per second. The dynamic and complex viscosity of the PS composites were studied and compared with (...) those of unfilled PS. The results showed that the frequency,  is shifted from 0.46 to 0.072 radians/s and the value of dynamic viscosity increases from 5.0104 to 1.3105 Pa.s by the addition of the rubber for PS. Zero-shear viscosity, 0 was found to be increased from is 9.5104 for PS/waste tire composite to 4.5104 for PS. The flow activation energy is calculated from 0 by using the rheometric software to be 1.063 105 and 1.46 105 J/mol.K for Ps and PS composite, respectively. (shrink)

Abstract: Polystyrene/waste tires composites were prepared in this study by incorporating small particles of waste tires into polydisperse commercial polystyrene (PS) in a melt-mixing method. The dynamic mechanical properties of PS and PS/composite were studied using ARES-Rheometer under nitrogen atmosphere in parallel plate geometry with diameter 8 mm. The measurements were carried out over a wide range of temperatures ranged from 120°C to 220°C and frequencies from 100 to 0.1 radians per second. The shear compliance of PS composite were studied (...) and compared with those of unfilled PS. The shear compliance were studied and evaluated. Where the values of J' at  = 0.06 radians/s are 110-4 and 5.310-5 Pa-1 for PS and PS composite, respectively At  = 0.1 radians/s the addition of the rubber alters the value of J'' from 1.610-4 to 8.410-5 Pa-1. That means the stability of PS is enhanced by the incorporation of the rubber. (shrink)

Abstract: Accurate stock price prediction is essential for informed investment decisions and financial planning. In this research, we introduce an innovative approach to forecast stock prices using an Artificial Neural Network (ANN). Our dataset, consisting of 5582 samples and 6 features, including historical price data and technical indicators, was sourced from Yahoo Finance. The proposed ANN model, composed of four layers (1 input, 1 hidden, 1 output), underwent rigorous training and validation, yielding remarkable results with an accuracy of 99.84% and (...) an average error of 0.005. Additionally, we conducted a feature importance analysis, identifying the key drivers of stock price prediction, such as "High," "Low," "Open," "Volume"," and "Date." This study not only offers a highly accurate stock price prediction model but also contributes valuable insights into the influential factors affecting stock prices, enhancing the field of financial analysis and investment decision-making that are suitable for the task. (shrink)

In this work, polystyrene/waste tires composites were prepared using the melt-mixing method.. The effect of the preparation conditions of the PS/waste tires composite is investigated in this work by using Gel permeation chromatography (GPC) technique. Stability at elevated temperatures were found to increase with the addition of waste tires to PS as confirmed by the results. GPC results indicate that the preparation conditions of the PS/waste tires composite has no effect on the Ps chains as indicated by GPC technique. The (...) signals of the GPC for unfilled and filled PS are similar. That evidences no thermo-mechanical chain degradation is taken place during the addition of the waste tires under the conditions of the melt-mixing process . (shrink)

The study aims to identify the efficiency of the university education performance from the perspective of postgraduate and undergraduate students in international and Palestinian universities. The analytical descriptive approach was used for this purpose and the questionnaire was used as a main tool for data collection. The study community consists of: post graduate students, (23850) graduate students and (146355) undergraduate students. The sample of the study was 378 graduate students and 383 undergraduate students. The random stratified sample was used. The (...) Statistical Package of Social Sciences (SPSS) was also used for data analysis. The study reached a number of results, the most important of which are: The level of efficiency of educational performance in Palestinian and international universities from the point of view of postgraduate and undergraduate students was high. And that there are significant differences between the average views of the sample of the study on the efficiency of educational performance in Palestinian and international universities attributed to the University and to the benefit of international universities. The study concluded many recommendations, the most important of which is the necessity of continuing to develop e-learning strategies that affect the efficiency of educational performance and research commensurate with the university's position in the local and international community, which puts it on the best classification between local and international universities through e-learning. (shrink)

Waste polyethylene (PE) bags were reused in the modification of commercially available bitumen. The bitumen/PE blend was prepared by mixing homogenously commercial bitumen with waste PE in the molten state. The samples of bitumen blend and bitumen base were rheologically analyzied. The rheological properties such as complex modulus, shear compliance, torque and complex viscosity of bitumen and bitumen blend were studied using an ARES- Rheometer (Rheometric Scientific, Co.) in the dynamic mode, plate-plate geometry with diameter 8 mm. The measurements were (...) performed over a wide range of temperatures ranged from-10°C to 60°C and frequencies from 100 to 0.1 radians per second. The results evidence that the complex modulus, shear compliance, torque and viscosity are improved by the incorporation of the waste PE into bitumen. The flow activation energy for neat bitumen and bitumen-9%PE are calculated from 0 by using the rheometric software. (shrink)

Abstract: Waste polyvinylchloride (PVC) pipes were reused in the modification of commercially available bitumen. Waste PVC/ bitumen blends were prepared by melt-mixing method. Rheological characteristics of the neat bitumen and bitumen blends samples were investigated. The rheological properties were determined using an ARES- Rheometer (Rheometric Scientific, Co.) under nitrogen atmosphere in parallel plate geometry with diameter 25 mm. The measurements were performed over a wide range of temperatures ranged from -10°C to 60°C and frequencies from 100 to 0.1 radians per (...) second. Improvement in rheological properties. (shrink)

The dynamic viscoelastic properties of Polyvinylacetate with molecular weight 83000g/mol (PVA 83K) were determined by using a Rheometer operated in the dynamic mode and 8 mm parallel plate over a wide range of temperature as a function of frequency. The measurements were performed successively in the parallel plate geometry using 8 mm plate instead of 25 mm. The glass plateau regime is clearly observed because we could measure PVA 83K sample successively under its glass temperature. The rheological properties of polydisperse (...) PVA 83K were completely studied and the experimental data were analyzed using the Winter model. (shrink)

Abstract: The dynamic viscoelastic properties of Polyvinylacetate with molecular weight 83000g/mol (PVA 83K ) were determined by using a Rheometer operated in the dynamic mode and 8 mm parallel plate over a wide range of temperature as a function of frequency. The measurements were performed successively in the parallel plate geometry using 8 mm plate instead of 25 mm. The glass plateau regime is clearly observed because we could measure PVA 83K sample successively under its glass temperature. The rheological properties (...) of polydisperse PVA 83K were completely studied. The storage and loss compliance and the relaxation spectrum are evaluated. (shrink)

Abstract: Adoption of digital system becomes an innovative revolution to replace the tradition work into scientific means. Electronic government is the use of technology in which particular wireless based application sustains the provision of online interconnectivity in the way to convey a speedy service delivery and materialize an easy accessibility of users via government portal. Moreover, the vitality of e-government has been recognized in the contemporary era of science and technology across the world. The chief aim of this study to (...) represent a literature of an electronic government use in a conceptual means in which proposed determinants as PEOU, PU, TIEG, SI, and ITU envisage the intention of the users’ online services of government in a Pakistan perspective. In the existing literature all constructs of the proposed model possess an effect on the intention to use e - government and the theoretical approach encompasses the TAM and UTAUT model to assist the technological adopti on of the employee's use of the innovative system in an organization. However, Pakistan has been ranked low in the e-government development index that seems the backwardness of the e-government adaptation in the country that is recognized as the dire need to be adjusted with public sectors to sustain an effective and efficient service delivery. It seems the poor literacy rate an d financial constraints are serious obstacles for adopting e-government technology in the working atmosphere of the diverse public sector organizations. Keywords: Electronic government, Perceived usefulness, Obstacles, Recommendations, Intention to use. (shrink)

Abstract— Polystyrene/waste tires composites were prepared in this study by incorporating shredded waste tires into polydisperse polystyrene in a melt-mixing method. The dynamic mechanical properties of PS and PS/composite have been evaluated and compared. These properties were studied using ARES-Rheometer under nitrogen atmosphere in parallel plate geometry with diameter 8 mm. The measurements are carried out over a wide range of temperatures ranged from 120°C to 220°C and frequencies from 100 to 0.1 radians per second. The shear creep stress J(t) (...) and loss factor were studied and compared with those of unfilled PS. The dynamic mechanical properties and stability at elevated temperatures were found to increase with the addition of waste tires to PS as confirmed by the results. From the results, the value of J(t) modulus for PS/waste tire is higher than this for the original material of PS. The incorporation of the rubber to the PS changes the value of J(t) at 0.001 second from 5.610-6 to 3.710-6 Pa-1 for PS and PS/waste tire, respectively and this difference increases with time. This confirmed that PS/waste tire composite exhibits higher stability at 180°C for a long time than the original unfilled PS. At frequency  = 6.7102 radians/s , the value of tan increases about 20% by the incorporation of the rubber filler, due to the increase in the G'' modulus particularly at low frequencies in the flow regime. (shrink)

Abstract: In this paper, an exact image compression based on bit-planes blocking is proposed. The proposed algorithm uses two bit codes for block representation. The codes represent the states of Unicode block and non-Unicode. The algorithm considers further division to non-Unicode block. The block division continues until the smallest block size which are kept as residuals. The smallest block size in the study is two by two. The main process of encoding consumed three codes. Subsequent process uses the fourth code (...) for further compression. The resultant file is subject to further exact compression. The compression technique considered in this study is Huffman. The compression-decompression implementation complexity is comparable with the well-known methods. Also, the compression ratio for the algorithm is comparable with well-known methods. The algorithm parallelization is straightforward and dependent on number of planes. Within a plane, the process hardware realization is simple and does on require special hardware. (shrink)

Abstract— In this study, a proposed faces recognition methodology based on the neural micro-classifier network. The proposed methodology uses simple well known feature extraction methodology. The feature extraction used is the discrete cosine transformation low frequencies coefficients. The micro-classifier network is a deterministic four layers neural network, the four layers are: input, micro-classifier, counter, and output. The network provide confidence factor, and proper generalization is guaranteed. Also, the network allows incremental learning, and more natural than others. The proposed face recognition (...) methodology was tested using the standard ORL data set. The experimental results of the methodology showed comparative performance. (shrink)

Throughout this research, imposing the training of an Artificial Neural Network (ANN) to play tic-tac-toe bored game, by training the ANN to play the tic-tac-toe logic using the set of mathematical combination of the sequences that could be played by the system and using both the Gradient Descent Algorithm explicitly and the Elimination theory rules implicitly. And so on the system should be able to produce imunate amalgamations to solve every state within the game course to make better of results (...) of winnings or getting draw. (shrink)

According to the literature review, there is much room for improvement of college student retention. The aim of this research is to evaluate the possibility of using deep and machine learning algorithms to predict whether students continue to attend college or will stop attending college. In this research a feature assessment is done on the dataset available from Kaggle depository. The performance of 20 learning supervised machine learning algorithms and one deep learning algorithm is evaluated. The algorithms are trained using (...) 11 features from 1000 records of previous student registrations that have been enrolled in college. The best performing classifier after tuning the parameters was NuSVC. It achieved Accuracy (91.00%), Precision (91.00%), Recall (91.00%), F1-score (91.00%), and time required for training and testing (0.04 second). Additionally, the proposed DL algorithm scored: Accuracy (93.00%), Precision (93.00%), Recall (93.00%), F1-score (93.00%), time required for training and testing (0.66 second) for predicting whether student will continue to attend college or not. (shrink)

Background: A bean is the seed of one of several genera of the flowering plant family Fabaceae, which are used as vegetables for human or animal food. They can be cooked in many different ways, including boiling, frying, and baking, and are used in many traditional dishes throughout the world. Beans are one of the longest-cultivated plants. Broad beans, also called fava beans, in their wild state the size of a small fingernail, were gathered in Afghanistan and the Himalayan foothills. (...) In a form improved from naturally occurring types, Beans were an important source of protein throughout old and new world history, and still are today. Objectives: The main goal of this expert system is to get the appropriate diagnosis of disease and the correct treatment. Methods: In this paper, the design of the proposed Expert System was produced to help farmers and those interested in agriculture in diagnosing many of the Bean diseases such as Fusarium wilt, Charcoal rot or ashy stem blight, Bacterial leaf spot and blight, Mung bean yellow mosaic virus, Cercospora leaf spot. The proposed expert system presents an overview of Bean diseases are given, the cause of diseases outlined and the treatment of disease whenever possible is given out. CLIPS Expert System language was used for designing and implementing the proposed expert system. Results: The proposed Bean diseases diagnosis expert system was evaluated by Agricultural experts and some friends interested in agriculture and they were satisfied with its performance. Conclusions: The proposed expert system is very useful for Farmers and those interested in agriculture. (shrink)

The study aimed to identify the reality of the use of social networks in the technical colleges in Palestine, where the variables of social networks were included. The analytical descriptive method was used in the study. A questionnaire consisting of (12) items was randomly distributed to college workers Technology in the Gaza Strip. The sample of the study consisted of (205) employees of these colleges. The response rate was 74.5%. The results showed a high degree of approval for the dimensions (...) of the social networks and a relative weight (74.15%) according to the perspective of the employees of the technical colleges in the Gaza Strip. The results of the study showed that there is a high level of social networking areas (site management and Website Content) in the technical colleges in the Gaza Strip. The field of site management ranked first with a relative weight of 74.91%, and second and last (Content Site) with a relative weight (73.38%). The results showed that there were differences between colleges in the use of social networks where the results showed that the most common colleges used these networks (UCAS) and the least used is (GTC). The results showed no differences between male and female employees in the use of social networks in technical colleges. The researchers suggest a number of recommendations, including: the need to raise awareness of the importance of Facebook and other social networking sites, through the holding of courses for employees in technical colleges, and to identify the ways to optimize the use of such sites, and the benefits of this use, and reflected positively on technical colleges. And the adoption of dealing with the various social networking sites as a reality, and the Palestinian and Arab technical colleges, use them in accordance with the objectives of technical colleges. Advise the Department of Technical Colleges to devote time to their presence on social networks to follow the public and respond to their queries. There is a need for the attention of decision-makers in technical colleges in social sites, because they are considered an important and effective means of communication, and the link between beneficiaries and decision-makers. There is a need to promote the use of modern electronic means of work and the need to increase the link of customers to the college through electronic services. (shrink)

Web page phishing is a type of phishing attack that targets websites. In a web page phishing attack, the attacker creates a fake website that looks like a legitimate website, such as a bank or credit card company website. The attacker then sends a fraudulent message to the victim, which contains a link to the fake website. When the victim clicks on the link, they are taken to the fake website and tricked into entering their personal information.Web page phishing attacks (...) are a serious threat to online security. They can be very effective, as they often look very convincing. To protect yourself from web page phishing attacks, you should be suspicious of any emails or messages that ask for your personal information. Do not click on links in emails or messages from unknown senders. If you are unsure whether a website is legitimate, do not enter your personal information. Therefore, in this study, we present a novel approach to detect whether a web page is phishing or legitimate using a neural network model. (shrink)

Abstract: This research aims at the design and implementation of an automatic high-performance voltage stabilizer which helps to detect inappropriate voltage levels and correct them to produce a reasonably stable output. The system consists of five dependent architectural designs which involve the power supply, delay switching circuit, monitoring circuit and load changeover circuit using 555 ic which produces the required signal when switched on by a relay to activate the alarm. The system uses a relay to charge the batteries and (...) automatically switches on this supply to supply the loads. It is composed of switching transistors and relay to control the power provided to ac loads, and it has LEDs for indicating the state of the system, 240-220vac/120-110vac switch, voltmeter displaying load voltage, heatsink, and fans for cooling the system. The system protects electrical equipment and machine against voltage surge. (shrink)

Abstract: The intelligent embedded agricultural robotic system is a low cost and efficient microcontroller robot which include; A soil moisture monitoring system which monitors the moisture content of the soil in the various parts of the field and the measured data to a microcontroller unit which in turn displays the received data on a Liquid Crystal Display to determine when to irrigate or spray the farm field. An automatic car, which follows a path designed in the field, i.e., a white (...) line on a black surface integrated with a spraying and irrigating mechanism for carrying out agricultural spray and irrigation. An automatic solar tracking system that tracks the sun’s position for maximum light intensity was used to charge the DC 12V battery which was used to power to the robotic system. A refilling system with obstacle detection feature was used for refilling water, chemical or fertilizer spray in the spraying and irrigating tank integrated with the line follower robotic system. This embedded system is useful for farmers who wish to monitor the soil moisture content of the field, and automate spraying and irrigation purposes at low costs and higher efficiency. (shrink)

Over 1.5 million living animal species have been described—of which around 1 million are insects—but it has been estimated there are over 7 million animal species in total. Animals range in length from 8.5 micrometres to 33.6 metres. In this paper an Artificial Neural Network (ANN) model, was developed and tested to predict animal species. There are a number of features that influence the classification of animal species. Such as the existence of hair/ feather, if the animal gives birth or (...) spawns, it is airborne, aquatic, predator, toothed, backboned, venomous, has –fins, has-tail, cat-sized, and domestic. A model based on the Multilayer Perceptron Topology was proposed and trained, using data set what was collected from UCI Machine Learning Repository. Evaluation of the proposed model shows that the ANN model is able to correctly predict the animal category with 100% accuracy. (shrink)

Abstract: In this study, we explore the possibility of classifying the plant species. We collected the plant species from Kaggle website. This dataset encompasses 544 samples, encompassing 136 distinct plant species. Recent advancements in machine learning, particularly Artificial Neural Networks (ANNs), offer promise in enhancing plant Species classification accuracy and efficiency. This research explores plant Species classification, harnessing neural networks' power. Utilizing a rich dataset from Kaggle, containing 544 entries, we develop and evaluate a neural network model. Our neural network, (...) featuring a single hidden layer, achieves remarkable results—a staggering 100% accuracy and a minute average error rate of 0.002. Beyond performance metrics, we delve into the intricacies of plant Species classification through feature importance analysis. The most influential features— Vegsout, durflow, semiros, pdias, begflow, wind, leafy, autopoll and insects— uncover the physiological traits underpinning accurate rice classification. This research contributes to advancing rice classification methods and highlights the potential of ANNs in optimizing agricultural practices, ensuring plant safety, and bolstering global trade. (shrink)

This paper aims at helping trainees to overcome the difficulties they face when dealing with Arduino platform by describing the design of a desktop based intelligent tutoring system. The main idea of this system is a systematic introduction into the concept of Arduino platform. The system shows the circuit boards of Arduino that can be purchased at low cost or assembled from freely-available plans; and an open-source development environment and library for writing code to control the board topic of Arduino (...) platform. The system is adaptive with the trainee’s individual progress. The system functions as a special tutor who deals with trainees according to their levels and skills. Evaluation of the system has been applied on professional and unprofessional trainees in this field and the results were good. (shrink)

Abstract: The objective of this study was to evaluate water productivity of alfalfa (Medicago sativa) under centre pivot irrigation system. The experimental works were conducted at three centre pivot irrigation projects (Indian, Arab Authority for Agricultural Investment and Development (AAAID) and Sedonix projects) located at Khartoum State during the period from April 2011 to April 2013. In each project, three irrigation systems were randomly selected for the study treatments. Crop water requirement was obtained using CROPWAT 8 computer model. The parameters (...) tested were Christiansen coefficient of uniformity (Cu%), distribution uniformity (Du%), Scheduling uniformity (Su) and Water productivity (kg/m3). SAS (statistical package) was used to analyze the data. The variations among means were checked by the least significant difference (LSD). The results showed that Cu%, Du%, Su and water productivity significantly affected by the management practices in different irrigated projects. Sedonix project gave the highest values of hydraulic characteristic (Cu 85%, Du 81% and Su 1.23) while AAAID project recorded the lowest values (Cu 74%, Du 70%, Su 1.43). Water productivity significantly increased in Sedonix project (0.45 kg/m3/cut) followed by Indian projects (0.38 kg/m3/cut) and AAAID which ranked the least (0.27 kg/m3/cut). It is concluded that for improvement water productivity; proper technical guidelines for system management, operation and scheduling should be followed. (shrink)

Abstract: In this paper, the definition of triple Aboodh transform of fractional order α, where α ϵ [0, 1], is introduced for functions which are fractional differentiable. We also present several properties of this transform. Furthermore, some main theorems and their proofs are discussed.

The study aimed to identify the relationship between correcting the deviations in the measurement of performance and achieving the objectives of control and the performance of the job at the Islamic University in the Gaza Strip. To achieve the objectives of the research, the researchers used the descriptive analytical approach to collect information. The questionnaire consisted of (20) statements distributed to three categories of employees of the Islamic University (senior management, faculty members, their assistants and members of the administrative board). (...) A random sample of 314 employees was selected and 276 responses were retrieved with a recovery rate of 88.1%. The Statistical Analysis Program (SPSS) was used to enter, process, and analyze the data. The results of the study showed a positive relationship between correcting deviations in performance measurement and achieving the control objectives represented by the functional performance in the Islamic University from the point of view of the members (senior management, faculty and their assistants, and the administrative board), where the relative weight of all the paragraphs was (74.25%). The study recommended the need to ensure that the actual performance of the planned performance is matched and decisions are taken to correct the serious deviations and take the necessary measures in terms of retraining and change in regulations, wages and bonuses and punishment of the culprit, neglect and negligence by mistake. (shrink)

Abstract: Lotteries have long been a source of fascination and intrigue, offering the tantalizing prospect of unexpected fortunes. In this research paper, we delve into the world of lottery predictions, employing cutting-edge AI techniques to unlock the secrets of lottery outcomes. Our dataset, obtained from Kaggle, comprises historical lottery draws, and our goal is to develop predictive models that can anticipate future winning numbers. This study explores the use of deep learning and time series analysis to achieve this elusive feat. (...) Through rigorous experimentation and data-driven approaches, we seek to determine the viability of AI in the realm of lottery predictions. Our findings reveal both the promise and limitations of AI in this context, shedding light on the complexities of lottery data and the potential need for quantum computing as a last resort. (shrink)

In this paper, we developed an Artificial Neural Network (ANN) for detect the absence or presence of lung cancer in human body. Symptoms were used to diagnose the lung cancer, these symptoms such as Yellow fingers, Anxiety, Chronic Disease, Fatigue, Allergy, Wheezing, Coughing, Shortness of Breath, Swallowing Difficulty and Chest pain. They were used and other information about the person as input variables for our ANN. Our ANN established, trained, and validated using data set, which its title is “survey lung (...) cancer”. Model evaluation showed that the ANN model is able to detect the absence or presence of lung cancer with 96.67 % accuracy. -/- . (shrink)

In this paper an Artificial Neural Network (ANN) model was used to help cars dealers recognize the many characteristics of cars, including manufacturers, their location and classification of cars according to several categories including: Buying, Maint, Doors, Persons, Lug_boot, Safety, and Overall. ANN was used in forecasting car acceptability. The results showed that ANN model was able to predict the car acceptability with 99.12 %. The factor of Safety has the most influence on car acceptability evaluation. Comparative study method is (...) suitable for the evaluation of car acceptability forecasting, can also be extended to all other areas. (shrink)

Papaya is a tropical fruit with a green cover, yellow pulp, and a taste between mango and cantaloupe, having commercial importance because of its high nutritive and medicinal value. The process of sorting papaya fruit based on maturely is one of the processes that greatly determine the mature of papaya fruit that will be sold to consumers. The manual grading of papaya fruit based on human visual perception is time-consuming and destructive. The objective of this paper is to the status (...) classification of papaya fruits if it's mature or partially matured or unmatured. A deep learning technique that was extensively applied to image recognition was used. The trained model achieved an accuracy of 100% on a held-out test set, demonstrating the feasibility of this approach. Classification model of VGG16 achieved a 100% accuracy and 112 seconds of training time. (shrink)

The study aimed to identify the digital transformation in Non-Governmental Organizations in Palestine, and the study used the descriptive analytical approach, and a structured questionnaire was used to collect data that contribute to achieving the objectives of the study, and the study population consists of employees in Non-Governmental Organizations in the southern Palestinian governorates, and a random sample was used to collect Data where (183) applicable questionnaires were retrieved. The results of the study showed that the general assessment of digital (...) transformation reached (83.92%), and that the arrangement of areas of digital transformation is as follows: (infrastructure, organizational culture, human resources, leadership and administrative support, plans and strategies, material resources). The study presented a set of recommendations, the most important of which are: the necessity of providing a budget for training and development, attracting expertise and specialists in digital transformation to work in organizations, and providing the necessary software tools to build and manage the digital transformation process. (shrink)

The study aimed to identify the digital transformation in Non-Governmental Organizations in Palestine, and the study used the descriptive analytical approach, and a structured questionnaire was used to collect data that contribute to achieving the objectives of the study, and the study population consists of employees in Non-Governmental Organizations in the southern Palestinian governorates, and a random sample was used to collect Data where (183) applicable questionnaires were retrieved. The results of the study showed that the general assessment of digital (...) transformation reached (83.92%), and that the arrangement of areas of digital transformation is as follows: (infrastructure, organizational culture, human resources, leadership and administrative support, plans and strategies, material resources). The study presented a set of recommendations, the most important of which are: the necessity of providing a budget for training and development, attracting expertise and specialists in digital transformation to work in organizations, and providing the necessary software tools to build and manage the digital transformation process. (shrink)

Abstract: Networking is one of the most important areas currently used for data transfer and enterprise management. It also includes the security aspect that enables us to protect our network to prevent hackers from accessing the organization's data. In this paper, we would like to learn what the network is and how it works. And what are the basics of the network since its emergence and know the mechanism of action components. After reading this paper - even if you do (...) not have a general background on networking - you will be able to manage your own network and be able to distribute and control your ip. (shrink)

This study aimed to identify the digital transformation and its impact on the application of Cyber Security in the Palestinian Ministry of Interior and National Security. The study used the analytical descriptive approach. The study tool (questionnaire), and the comprehensive survey method was used, where (61) questionnaires were retrieved (87.1%), and they were unloaded and analyzed using the SPSS statistical package. The study found several results, including that there is a statistically significant correlation between all dimensions of Digital transformation and (...) the application of Cyber Security in the Ministry of Interior and National Security. And that there is an impact of Digital transformation on the application of security in the Ministry of Interior and National Security in the governorates of Gaza, and the impact coefficient was (0.897). It was found that the dimensions affecting the dependent variable of Cyber Security are dimensions (organizational structure, job description, data privacy and security, technical infrastructure required for digital transformation), as these dimensions affect (89.7%) of the variation in the application of Cyber Security. The study presented a set of recommendations, the most important of which are: The need for the Ministry's administration to provide a special budget to develop the quality of its electronic services as a lever for digital transformation. And the need for the number of workers in computer and information technology departments and units to be commensurate with the volume and quality of work to bridge the gap between the required performance and the actual performance. The ministry should set a clear methodology for exchanging data and information between the components of the ministry. And the need for the Ministry of Interior and National Security to use a protection network capable of detecting all threats. (shrink)

Abstract— This study aimed to identify the degree of use of the capabilities of decision-support systems in Palestinian institutions higher education, Aqsa University in Gaza - a case study. The study used a analytical descriptive approach, and the researchers used the of questionnaire tool to collect the data, the researchers using stratified random sample distributed (150) questioners to the study population and (126) was obtained back with rate of 84%. The study showed that the most important results are: that senior (...) management supports the existence of decision support systems and that there is approval by the respondents on the paragraphs of the use of the capabilities of decision support systems in general. And that there are no significant differences between the averages of the answers of respondents differences about the degree of use of decision support systems capabilities attributed to personal data. The study also concluded a series of recommendations including: increasing the adoption of the senior management decision support in their decision-making systems. And increased regulatory attention to the potential available to decision support systems directly to the senior management in the Palestinian universities in the Gaza Strip. There is an increased interest in the physical and technical possibilities available for the use of decision support systems. There is an increased interest in human potential available for the use of decision support systems. Investment of information available to universities in building the capacities of integration techniques and other information technology capabilities. The empowerment of human resources in universities and participating in making decisions concerning the construction of the capabilities of information technology. (shrink)

Abstract—Smart homes and Wireless Home Automation Networks (WHAN) face several challenges in terms of cost, scalability, reliability, delay, energy consumption and many others. Smart homes typically have huge number of communicating devices. Efficient management of network resources is a major challenge in such environments. This paper provides insights on how to improve the MAC layer in smart home networks to fulfil the requirements of the different smart home applications. It provides a classification of the different smart home applications and identifies (...) the main requirements and challenges regarding the MAC layer in this environment. It also provides insights for MAC protocols designers by highlighting the main issues in designing MAC schemes for smart home environment. Based on the analysis, the paper highlights adaptability as the most critical and challenging feature for smart home MAC protocols. (shrink)

Mango is an economically significant fruit crop cultivated in various tropical and subtropical regions around the world. However, the productivity and quality of mangoes can be severely impacted by a range of pests. This research paper introduces an innovative approach to identify mango pests using an expert system. The expert system integrates knowledge from entomology and plants to provide accurate identification of common mango pests. The paper outlines the development and implementation of the expert system using Clips shell, which utilizes (...) rule-based techniques to analyze symptoms associated with mango pests. By inputting observed symptoms, such as leaf spots, fruit damage, leaf mild and stem cankers the system can accurately identify the specific pest species affecting the mango tree. For each pest, the paper discusses their specific symptoms and Favorable conditions that affect the mango plant. By understanding the identification and symptoms of these pests, mango growers and agricultural professionals can implement appropriate pest management strategies to mitigate the economic losses caused by these insects. The research presented in this paper aims to contribute to the body of knowledge on mango pest management, facilitating sustainable mango production and ensuring the availability of high-quality mangoes in global markets. (shrink)

The aim of this study was to identify the obstacles facing the application of knowledge management and its impact on performance at Palestine Technical University-Kadoorei from the point of view of employees and to detect the differences between the average views of the study sample on the subject of the study according to some variables such as (gender, nature of work, Education Level, specialization, years of experience). The study followed the descriptive analytical method and the questionnaire as a tool for (...) study. It was distributed to 74 employees. After the questionnaire was distributed, the data was collected and coded and entered into the computer and processed statistically using the SPSS program. The study found that the percentage of approval of the obstacles to the application of knowledge management at Palestine Technical University-Kadoorei differed between few and large, and the relative weight of the axis was complete (68.2). The degree of awareness of the workers of the reality of performance excellence at the University of Palestine Technical-Kadoorei was between medium and very large. There is an impact of the constraints of the application of knowledge management on performance excellence at Palestine Technical University-Kadoorei. In light of the results of the previous study, the researchers recommended that the importance of knowledge management should be taken into account in order to raise the university's reputation and reputation at home and abroad and improve its services to students and the local community. And to promote the exchange of experiences and knowledge with local, regional and international universities in order to enhance the knowledge and preserve it and provide modern and sophisticated scientific techniques and use them in administrative and academic work at the university. (shrink)

The main objective of this project is to provide acoustic assistance to the blind people and also deal with the problems faced by them to walk like the normal human beings. Thus the project aims to develop a device that would serve as a guiding assistance to them. The paper focuses on designing a device for visual impaired (or blind) people that would help them to travel independently and also with more ease. One of the biggest problem that the visual (...) impaired ones face is while travelling because when they walk in the indoors and outdoors they are not well aware of information about their location and orientation with respect to traffic and obstacles on their way unlike the normal beings. The technology proposed in the paper serves as a solution for visual impaired people. The project consists of smart shoe and smart cane (stick) that alerts visually impaired people over obstacles coming between their ways and could help them in walking with less collision. The main objective of this paper is to address a reliable encompassing of a call and a shoe that could communicate with the user through voice alert and pre-coded messages. (shrink)

Artificial intelligence is one of the most rapidly evolving fields today. It is used in the majority of computer science applications nowadays. Expert systems are one of the most valuable types of AI; they are used to deliver predictions and decisions in order to make scientific, medical, and even architectural challenges easier to address; they will eventually take the place of a human expert. Without having to meet with a genuine human specialist, the user will be able to get a (...) precise solution or diagnose to his problem. This study provides an illustration of how computer systems can be used in agriculture. In order to construct an expert system that can forecast a disease based on its symptoms, we chose a Coriander plant and five of its recognized ailments. CLIPS was used to develop the system. This article contains a full summary of the work that has been done. (shrink)

The study aims to identify the impact of the use of artificial intelligence techniques in improving the outputs of higher education in Business Administrative Colleges in the universities under study that formed the research community. As for the sample, it consisted of (130) academic respondents in these universities under study. The research concluded that there is a statistically significant effect of using artificial intelligence techniques (expert systems, neural networks) in improving the outputs of higher education in Business Administrative Colleges under (...) study. It was found that artificial intelligence technologies contribute to finding graduates who are able to carry out the process of modernization and professional development in various fields of work. These technologies also contribute to improving and developing the skills of graduates in the labor market and providing them with new skills and characteristics to perform their duties. The research recommended increasing interest in the expert systems technology by the universities under study because of its scientific importance in improving the outputs of higher education by reformulating them in the form of programs embraced by computers. (shrink)

Abstract: Heart diseases are increasing daily at a rapid rate and it is alarming and vital to predict heart diseases early. The diagnosis of heart diseases is a challenging task i.e. it must be done accurately and proficiently. The aim of this study is to determine which patient is more likely to have heart disease based on a number of medical features. We organized a heart disease prediction model to identify whether the person is likely to be diagnosed with a (...) heart disease or not using the medical features of the person. We used many different algorithms of machine learning such as Gaussian Mixture, Nearest Centroid, MultinomialNB, Logistic RegressionCV, Linear SVC, Linear Discriminant Analysis, SGD Classifier, Extra Tree Classifier, Calibrated ClassifierCV, Quadratic Discriminant Analysis, GaussianNB, Random Forest Classifier, ComplementNB, MLP Classifier, BernoulliNB, Bagging Classifier, LGBM Classifier, Ada Boost Classifier, K Neighbors Classifier, Logistic Regression, Gradient Boosting Classifier, Decision Tree Classifier, and Deep Learning to predict and classify the patient with heart disease. A quite helpful approach was used to regulate how the model can be used to improve the accuracy of prediction of heart diseases in any person. The strength of the proposed model was very satisfying and was able to predict evidence of having a heart disease in a particular person by using Deep Learning and Random Forest Classifier which showed a good accuracy in comparison to the other used classifiers. The proposed heart disease prediction model will enhances medical care and reduces the cost. This study gives us significant knowledge that can help us predict the person with heart disease. The dataset was collected from Kaggle depository and the model is implemented using python. (shrink)