Abstract

Abstract: The paper presented is a work started in summer 2014 for improving surfaces of turned holes. The work was confined to two materials; aluminum alloy and brass alloy. The internal machined surfaces were burnished by ball burnishing tools. Experimental work was carried out on a lathe machine to establish the effect of the internal ball burnishing parameters; namely, burnishing feed rate, speed, force and number of tool passes on the Surface roughness and surface hardness. The operation was carried out at load pushing speed 24 m/min through the hole. Turned Al-Br specimens were divided into groups, the parameters were changed with each group. The optimum values of surface roughness and surface hardness were obtained where the surface roughness improved from 3.14 µm to 0.14 µm for Al µm and from 2.25 to 0.16 for brass and the surface hardness improved from116 HV to 184 HV for Al and from 182 to 244 HV for brass.