In this paper an attempt has been made towards the design and evaluation of a solar parabolic trough collector (PTC) system integrated with a conventional oil boiler (COB) to increase the energy utilization effectiveness and reduce the environmental emission of the existing conventional oil boiler in the Kombolcha textile factory, in Ethiopia. The factory uses 8500 ton/annum of heavy fuel oil to generate 26 ton/hour of pressurized hot water at 140C temperature which causes an increase in greenhouse gas emissions, so (...) the solar parabolic trough collector hot water generation system will be an appropriate solution for this application. Based on the available annual solar radiation, estimates of the solar fraction, solar energy unit price and system pay-back period have been carried out. The proposed system has the potential to save 1055.9 ton/year of fuel oil. The unit cost of PTC solar energy is estimated to be 0.0088 $/kWh and the payback period of the plant is five years. Since the unit price of oil energy (0.0424 $/kWh) is much greater than the unit price of solar energy by a substantial margin (0.033 $/kWh) in Ethiopia, therefore the water heating system by a solar parabolic trough collector is a feasible alternative to heating by a conventional oil boiler. (shrink)

In this paper, the stability control of the inverted pendulum on a cart with a disturbance forces has been done using observer based and full state feedback H2 controllers. The Lagrangian equation has been used to model the system equation of motions and linearized the system to the unstable upward position. Comparison of the system stability has been simulated by comparing the proposed controllers using Matlab/Scripts and a promising results has been analyzed successfully.

Noise reduction is the major issue in the loudspeaker for the application of the musical instruments and related areas. In this paper, a noise disturbance control of a loudspeaker with optimal and robust controllers has been done successfully. The noise of the loudspeaker has been analyzed by simply track a reference cone displacement with the actual cone displacement. Static output feedback and H infinity optimal loop shaping controllers have been used to compare the actual and reference cone displacements by using (...) a sine wave and random cone displacement signals and a promising results have been analyzed. (shrink)

Noise reduction is the major issue in the loudspeaker for the application of the musical instruments and related areas. In this study, a noise disturbance control of a loudspeaker with optimal and robust controllers has been done successfully. The noise of the loudspeaker has been analyzed by simply track a reference cone displacement with the actual cone displacement. Static output feedback and H4 optimal loop shaping controllers have been used to compare the actual and reference cone displacements by using a (...) sine wave and random cone displacement signals and a promising results have been analyzed. (shrink)

In this study, the design and performance investigation of the permanent magnet machines have been done to increase the mechanical and electrical outputs improvement of the systems. A Permanent Magnet DC Motor (PMDM) and Generator (PMDG) have been modelled and designed to improve the angular position and generated current respectively. In this research, augmentation based H2 optimal and H4 synthesis controllers have been designed as a controller for the two systems and a comparison between the proposed controller for tracking a (...) reference inputs and a promising results have been obtained. (shrink)