As the world’s population grows and urbanization continues, the global waste crisis is becoming more severe, especially in developing countries. Without proper waste management, they may encounter various environmental and health risks. Biological technologies are regarded as promising waste management and recycling approaches in developing countries due to their cost-effectiveness and capability to handle diverse waste categories. One prominent technology in this aspect is the vermicomposting of organic waste utilizing the black soldier fly larvae. Nevertheless, (...) significant financial resources are still necessary to advance and expand biological waste treatment, which requires the participation of businesses. By examining waste management companies listed on the Vietnamese stock market, we highlight two challenges that hinder the adoption and scaling of the waste treatment system using black soldier flies and potentially other biological technologies in Vietnam. Specifically, the business regards the environmental services they offer primarily as a means to generate profit rather than as a genuine commitment to environmental preservation, and the values of companies operating in the environmental sector, particularly in waste management, have been significantly undervalued by the Vietnamese investing public. Therefore, we advocate for societal shifts toward the eco-surplus culture and apply the semiconducting principle of monetary and environmental values exchange to address the problem. (shrink)

(This is one of the essays to be included in a book examining the causes of day-to-day strife in the populations of modern democracies vying to live and assert the freedoms promised to them by systems of governance supposed and expected to represent them.) "If waste may be defined as all that is not being used for the growth and perpetuation of humanity, then health could be said to equate to all that is useful to this self-same objective. It (...) could be considered amiss to minimise such an expansive issue to that very simple definition; yet, recognising the simplicity and abiding by it at the individual level first and then at all levels in society requires acknowledgement, which, logically, should also trigger action." . (shrink)

E-waste is one of the most pressing challenges of our time, yet it is often ignored, especially in Southeast Asia. The “tsunami of e-waste” in the region has been putting our lives and our environment at risk. With the extensive use of electrical and electronic devices, we are also contributing to harming the environment and quickening the climate change by producing and discarding e-waste. Youths are among major users of electronic devices, and hunger for upgraded and newer (...) versions. -/- However, there is still a lack of sensitization on e-waste management issues in the Southeast Asia region. Why should not the young people be pioneers in educating this challenge to the young public? Our FRE-E-WASTE project team is firm in our belief that youths should take the lead in bringing to light this aspect of climate justice, to the best of our ability. -/- Implemented by a group of ASEAN environmental enthusiasts, STEP Forward Education and supported by the U.S. Department of State and the Young Southeast Asian Leaders Initiative (YSEALI), FRE-E-WASTE Project seeks to bring together a group of Southeast Asian environmental enthusiasts aged between 18 and 35 to connect and collaborate on e-waste issues in the region and eventually to create a toolkit about e-waste for the Southeast Asia region. (shrink)

According to the orthodox view, the goodness of a life depends exclusively on the things that actually happened within it, such as its pleasures and pains, the satisfaction of its subject’s preferences, or the presence of various objective goods and bads. In this paper, I argue that the goodness of a life also depends on what could have happened, but didn’t. I then propose that this view helps us resolve ethical puzzles concerning the standards for a life worth living for (...) animals and the significance of a life’s shape. (shrink)

A group of researchers led by QV Khuc of Hanoi-based Vietnam National University has just published a new paper concerning plastic waste and households’ tackling strategies in Vietnam.

The management of waste has become an increasingly critical issue as urbanization and industrial activities surge globally. Traditional waste management practices are struggling to keep pace with the rising quantities and complexities of waste. This paper delves into the integration of intelligent technologies, such as Artificial Intelligence (AI), the Internet of Things (IoT), and data analytics, into waste management systems. By examining current practices, methodologies, experiments, and results, this study aims to highlight the transformative potential of (...) intelligent technologies in optimizing waste management processes, enhancing efficiency, and reducing environmental impact. (shrink)

This paper argues that there is a conflict between two principles informing Locke’s political philosophy, namely his waste restriction and his strong voluntarism. Locke’s waste restriction is proposed as a necessary, enforceable restriction upon rightful private property holdings and it yields arguments to preserve and redistribute natural resources. Locke’s strong voluntarism is proposed as the liberal ideal of political obligations. It expresses Locke’s view that each individual has a natural political power, which can only be transferred to a (...) political body through the individual’s voluntary, actual consent. On this view, the legitimacy of a political power is dependent upon its subjects’ actual consent to its authority. After briefly outlining these two ideas informing Locke’s conception, I argue that we cannot maintain both at the same time. Therefore, contemporary Lockeans must either derive restrictions upon private property concerned with preserving natural resources from other aspects of Locke’s theory or they must accept weak voluntarism as the ideal of political obligations. I argue that both alternatives pose significant problems for the Lockean project. (shrink)

This short piece of communication has the sole purpose of identifying some evidence, supporting our view regarding a possible missing environment-nurturing cultural value. Here, we attempt to examine the presence of cultural studies within the boundary of waste management research.

d organic compounds that pose serious risks to aquatic ecosystems and human health. This study investigates the application of biochar as an effective treatment medium for textile wastewater. Biochar, a carbon-rich material produced through pyrolysis of organic matter, offers high surface area, porosity, and adsorption properties. We evaluated the efficacy of biochar in removing dyes and heavy metals from simulated textile effluent under varying conditions of contact time, pH, and biochar dosage. Results indicated that biochar significantly reduced dye concentration and (...) metal ions, with optimal removal rates achieved at specific pH levels and higher biochar amounts. Mechanistic studies suggested that adsorption, electrostatic interactions, and ion exchange were the primary removal processes. This research highlights the potential of biochar not only as a sustainable solution for textile effluent treatment but also as a means to recycle organic waste, contributing to a circular economy. Further investigations into the regeneration and reuse of biochar in wastewater treatment are recommended to enhance its practical applicability. (shrink)

The global production of radioactive wastes is expected to increase in the coming years as more countries have resorted to adopting nuclear power to decrease their reliance on fossil-fuel-generated energy. Discoveries of remediation methods that can remove radionuclides from radioactive wastes, including those discharged to the environment, are therefore vital to reduce risks-upon-exposure radionuclides posed to humans and wildlife. Among various remediation approaches available, microbe-mediated radionuclide remediation have limited reviews regarding their advances. This review provides an overview of the sources (...) and existing classification of radioactive wastes, followed by a brief introduction to existing radionuclide remediation (physical, chemical, and electrochemical) approaches. Microbe-mediated radionuclide remediation (bacterial, myco-, and phycoremediation) is then extensively discussed. Bacterial remediation involves biological processes like bioreduction, biosorption, and bioprecipitation. Bioreduction involves the reduction of water-soluble, mobile radionuclides to water-insoluble, immobile lower oxidation states by ferric iron-reducing, sulfate-reducing, and certain extremophilic bacteria, and in situ remediation has become possible by adding electron donors to contaminated waters to enrich indigenous iron- and sulfate-reducing bacteria populations. In biosorption, radionuclides are associated with functional groups on the microbial cell surface, followed by getting reduced to immobilized forms or precipitated intracellularly or extracellularly. Myco- and phycoremediation often involve processes like biosorption and bioaccumulation, where the former is influenced by pH and cell concentration. A Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis on microbial remediation is also performed. It is suggested that two research directions: genetic engineering of radiation-resistant microorganisms and co-application of microbe-mediated remediation with other remediation methods could potentially result in the discovery of in situ or ex situ microbe-involving radioactive waste remediation applications with high practicability. Finally, a comparison between the strengths and weaknesses of each approach is provided. (shrink)

Plastic waste pollution has become a significant issue, with global plastic production rising sharply over the decades. This dramatic increase has resulted in severe environmental and health consequences, affecting both terrestrial and aquatic ecosystems and potentially leading to serious health problems in humans. Addressing this crisis requires an approach that involves enhancing public capability, implementing effective policy interventions, and fostering motivation toward sustainability.

Abstract: Waste polyvinylchloride (PVC) pipes were reused in the modification of commercially available bitumen. Waste PVC/ bitumen blends were prepared by melt-mixing method. Rheological characteristics of the neat bitumen and bitumen blends samples were investigated. The rheological properties were determined using an ARES- Rheometer (Rheometric Scientific, Co.) under nitrogen atmosphere in parallel plate geometry with diameter 25 mm. The measurements were performed over a wide range of temperatures ranged from -10°C to 60°C and frequencies from 100 to 0.1 (...) radians per second. Improvement in rheological properties. (shrink)

We offer an overview of both the empirical literature on food waste and philosophical work on the concept of waste. We use this background to argue that an overemphasis on the reduction of individual food waste is misleading at best, and pernicious at worst, in combatting the substantial problems that global food waste creates. Rather, we argue that civic engagement and political activism aimed at institutional reform will be essential in addressing these problems.

This article sheds light on managing and utilizing scientific and technological funds (Sci-Tech funds) in Vietnam.

Employing BMF analytics to predict behaviors and intentions related to 3R initiatives, eco-friendly practices, and zero-waste lifestyles offers insights into adapting to environmental changes, an area that remains underexplored in the literature.

In this paper, I first argue that waste is best understood as (a) any process wherein something useful becomes less useful and that produces less benefit than is lost—where benefit and usefulness are understood with reference to the same metric—or (b) the result of such a process. I next argue for the immorality of waste. My concluding suggestions are that (W1) if one person needs something for her preservation and a second person has it, is avoidably wasting it, (...) and refuses to allow the first to make some greater use of it, the second may be morally wrong and that (W2) if one person needs something for her preservation understood according to her metric and a second person has it, is avoidably wasting it according to his own metric, and refuses to allow the first to make some greater use of it, the second is morally wrong. (shrink)

In this work, polystyrene/waste tires composites were prepared using the melt-mixing method.. The effect of the preparation conditions of the PS/waste tires composite is investigated in this work by using Gel permeation chromatography (GPC) technique. Stability at elevated temperatures were found to increase with the addition of waste tires to PS as confirmed by the results. GPC results indicate that the preparation conditions of the PS/waste tires composite has no effect on the Ps chains as indicated (...) by GPC technique. The signals of the GPC for unfilled and filled PS are similar. That evidences no thermo-mechanical chain degradation is taken place during the addition of the waste tires under the conditions of the melt-mixing process . (shrink)

The view that metaphysics is a waste of time appears to be gaining in popularity. It is held openly by many scientists and even many philosophers. I argue here that this is a consequence of the way metaphysics is usually done and the futility of a certain approach to it, and not a reason to suppose there is no useful knowledge to be acquired from its study. -/- .

Abstract— Waste Polyvinyl chloride-bitumen composites were prepared in the molten state by addition waste PVC pipes to commercial bitumen in different concentrations. The original material of the pure bitumen and bitumen composites are rheologically characterized. The viscoelastic properties such as shear compliance, torque and viscosity were measured and compared. These properties were studied using an ARES- Rheometer (Rheometric Scientific, Co.) equipment. The measurements were performed in the dynamic mode, plate-plate geometry of 25 mm diameter over the temperature range (...) from –10 to 60°C and angular frequency, varied from 102 to10-1 radian/s. The results are compared at reference temperatures10 and 60°C over a wide range of . The results evidence that the incorporation of the waste PVC into bitumen enhances the dynamic viscosity. The results evidence that the incorporation of the waste PVC into bitumen enhances the torque and the viscosity. So, the stability of the bitumen composites is more noticeable at 60°C. (shrink)

Waste polyethylene (PE) bags were reused in the modification of commercially available bitumen. The bitumen/PE blend was prepared by mixing homogenously commercial bitumen with waste PE in the molten state. The samples of bitumen blend and bitumen base were rheologically analyzied. The rheological properties such as complex modulus, shear compliance, torque and complex viscosity of bitumen and bitumen blend were studied using an ARES- Rheometer (Rheometric Scientific, Co.) in the dynamic mode, plate-plate geometry with diameter 8 mm. The (...) measurements were performed over a wide range of temperatures ranged from-10°C to 60°C and frequencies from 100 to 0.1 radians per second. The results evidence that the complex modulus, shear compliance, torque and viscosity are improved by the incorporation of the waste PE into bitumen. The flow activation energy for neat bitumen and bitumen-9%PE are calculated from 0 by using the rheometric software. (shrink)

Within siting literature there is strong agreement that compensation for environmental risks is a necessary condition for local acceptance of waste treatment facilities. In-kind compensation is commonly pushed forward as being more effective than financial benefits in reducing local opposition. By forcusing on the siting of a sanitary landfill in Santiago, Chile, this paper explores the performance of both types of compensation and relates the analysis to the notion of social norms of exchange. These are understood as being based (...) on three main types of social relations: care, justice and freedom. Whereas monetary compensation is associated with market relations based on freedom and the offer of in-kind compensation to egalitarian relations based on justice, the absence of compensation is linked to fraternal relations based on care. It is argued that in-kind compensation is more acceptable than monetary payments or not compensation because people tend to understand siting conflicts more as matters of justice rather than as matters of freedom or care. (shrink)

Abstract— Waste Polyvinyl chloride-bitumen composites were prepared in the molten state by addition waste PVC pipes to commercial bitumen in different concentrations. The original material of the pure bitumen and bitumen composites are rheologically characterized. The viscoelastic properties such as shear compliance, torque and viscosity were measured and compared. These properties were studied using an ARES- Rheometer (Rheometric Scientific, Co.) equipment. The measurements were performed in the dynamic mode, plate-plate geometry of 25 mm diameter over the temperature range (...) from –10 to 60°C and angular frequency, varied from 102 to10-1 radian/s. The results are compared at reference temperatures10 and 60°C over a wide range of . The results evidence that the incorporation of the waste PVC into bitumen enhances the dynamic mechanical moduli and the viscosity. The moduli were found to rise with increasing the waste PVC content. The stability of the bitumen blends is more noticeable at 60°C as confirmed by the results. (shrink)

Both biodegradable and non-biodegradable solid wastes are found in religious or worship places. Biodegradable waste consists of fruits, flowers, leaves, prepared food items, plantations, sweets and non-biodegradable waste consists of plastic covers, plastic plates, plastic cups, metal pieces, flags and so on. These were found during festivals, functions, yatras, urus, massive gatherings, and weddings in religious places. Large gatherings led to huge dumping of solid wastes in and around the religious places. The vendors and street hawkers after selling (...) their goods used to dump the leftover wastes near these places during the pre-pandemic period. During the pandemic outbreak from April 2020 to August 2020, the religious places were shut to the public leading to minimal or zero solid waste production. During lockdown relaxation from September 2020, these places were sanitized; people were restricted with minimal gatherings and instructed to follow COVID appropriate behaviour. Similarly during the second wave lockdown from May 2021 to August 2021, people were not allowed to visit these places which led to the reduction of solid waste production in religious places leading to reduction of air, water and soil pollution. (shrink)

Plastic waste is a significant environmental problem for almost all countries; therefore, protecting the environment from the problem is crucial. The most sensible solution to these problems is substituting the natural aggregates with substantial plastic waste in various building materials. This study aimed to optimise the mixed design ratio of cement brick containing plastic waste as aggregate replacement. Plastic cement brick mixtures were prepared by the incorporation of four different types of plastic waste such as polyethylene (...) terephthalate (PET), high-density polyethylene, low-density polyethylene and polypropylene into cement bricks with different cement contents (150, 300 and 450 g) and plastic replacement percentages (0, 3 and 6%). Compressive strength and water absorption of the plastic cement bricks were analysed using a statistical model through the response surface methodology. It revealed the optimum cement brick mixed design is C3-1% PET with the compressive strength of 27.50 MPa and water absorption of 1.16%. The optimised plastic cement brick also satisfied the general ASTM C62-17 requirements for building bricks despite the higher porosity observed by the scanning electron microscopy. The results from Fourier transform infrared spectroscopy analysis also showed that the addition of the plastic waste into cement brick was unlikely to modify the chemical compound within the cement brick mixtures. Thus, the proposed mathematical model can predict the required hardened properties of plastic cement bricks and could lead to greater utilisation of plastic waste in building materials. (shrink)

Abstract: In this work, polystyrene/waste tires composites were prepared by incorporating of waste tires into polydisperse commercial polystyrene in a melt-mixing method. The rheological characterization of PS and PS/composite have been studied and compared. These properties were studied using ARES-Rheometer under nitrogen atmosphere in parallel plate geometry with diameter 8 mm. The measurements are carried out over a wide range of temperatures ranged from 120°C to 220°C and frequencies from 100 to 0.1 radians per second. The complex modulus (...) (G*) were evaluated and compared with those of unfilled PS. The dynamic mechanical properties and stability at elevated temperatures were found to increase with the addition of waste tires to PS as confirmed by the results. The results showed that the value of G* at  = 1.0 radian/s is 1.8104 and 4.4104 Pa for PS and PS/waste tires, respectively. This difference rises at low frequencies-branch to be the value of G* at  = 0.06 radian/s is 8.8102 and 7.8103 Pa for PS and PS/waste tires, respectively. Generally G* increases by the addition of rubber as filler for PS . (shrink)

Abstract: Polystyrene/waste tires composites were prepared in this study by incorporating small particles of waste tires into polydisperse commercial polystyrene (PS) in a melt-mixing method. The dynamic mechanical properties of PS and PS/composite were studied using ARES-Rheometer under nitrogen atmosphere in parallel plate geometry with diameter 8 mm. The measurements were carried out over a wide range of temperatures ranged from 120°C to 220°C and frequencies from 100 to 0.1 radians per second. The shear compliance of PS composite (...) were studied and compared with those of unfilled PS. The shear compliance were studied and evaluated. Where the values of J' at  = 0.06 radians/s are 110-4 and 5.310-5 Pa-1 for PS and PS composite, respectively At  = 0.1 radians/s the addition of the rubber alters the value of J'' from 1.610-4 to 8.410-5 Pa-1. That means the stability of PS is enhanced by the incorporation of the rubber. (shrink)

In this paper, we argue that our moral concern for future well-being should reduce over time due to important practical considerations about how humans interact with spacetime. After surveying several of these considerations (around equality, special duties, existential contingency, and overlapping moral concern) we develop a set of core principles that can both explain their moral significance and highlight why this is inherently bound up with our relationship with spacetime. These relate to the equitable distribution of (1) moral concern in (...) a universe that we can only causally affect in one temporal direction; (2) access to the benefits from using spacetime as a resource; and (3) the burdens of care given (1) and (2). We conclude by considering the practical implications of our argument and find that, while it is often assumed that a preference for present over future well-being weakens the case for existential risk mitigation, this likely is not the case. (shrink)

The issue of poor waste management has become a very important issue of concern to various scholars in environmental studies. Effective waste management in Port Harcourt has been seen as one of the greatest issue being faced in Rivers State. It cannot be over emphasized that the generation of waste and its adverse effect has increased over time. This paper critically looks into the ethical implications and effects of poor waste management in Rivers state with focus (...) on Port Harcourt. Hence, this paper was able to establish that the failure of the government to enact environmental laws and punishing those found wanting, and also providing the necessary working tools for waste managers have all resulted to poor waste management. Thus, the effects of all these cannot be over emphasized. This paper makes some significant recommendations for government, waste managers and the public in general on the necessity to adopt certain ethical principles and also to sensitize the populace on proper waste management. The paper in conclusion exposes some ethical implications and effects of poor waste management in Port Harcourt and how it has resulted to the city of Port Harcourt called the Garden City now being seen as a Tattered City. (shrink)

The current study is conducted to examine the following research questions: 1) How are the father’s interactions with children regarding waste recycling associated with the children’s recycling behaviors? 2) How are the mother’s interactions with children regarding waste recycling associated with the children’s recycling behaviors?

Plastic waste accumulation in the environment due to huge volumes of plastic waste produced daily with no effective disposal method and waste management have raised public awareness to look for an alternative to replace the current disposal techniques. Waste utilisation or plastic recycling has been regarded as an excellent method to reduce the abundant amount of plastic waste as well as minimising the environmental impacts. In this article, a total of 163 previous studies between 2012 (...) and 2021 had been reviewed to discuss the utilisation of different types of plastic waste as aggregate in construction materials. This paper evaluates on the use of plastic as aggregate in terms of the physical, mechanical and durability properties of the construction materials as well as the environmental and cost analyses. It was found that the mechanical and durability properties of produced materials were altered after the addition of plastic as aggregates; however, the materials are still fulfilling the requirement of construction materials. Besides, a general SWOT analysis to highlight the advantages and disadvantages of plastic waste utilisation was also conducted. -/- . (shrink)

John Locke held that every person has a natural duty to use her property efficiently, and that consent is required for legitimate political power. On the face of it, these two positions seem to be in tension. This is because, (1) according to Locke, it is nearly impossible to use resources efficiently unless one lives within a political community, and (2)the waste restriction is enforceable. Consequently, it might seem that persons living outside civil society may be forced to submit (...) to civil power, in violation of the consent requirement. I argue that this tension is only apparent; although the waste restriction is enforceable, the consent requirement is safe. But in the course of resolving this difficulty, three significant, but little-noticed, features of Locke's doctrine of consent to government come to light: (A) consent is conceptually necessary, and not just morally required, for persons to be subject to political power; (B) most people living outside civil society have a moral obligation to enter civil society if they can; and (C) consent to government can bind under duress so long as the duress does not render anyone dependent on the arbitrary wills of others. (shrink)

In this paper we inquire into the fundamental assumptions that underpin the ideal of the Bio-Based Economy as it is currently developed . By interpreting the BBE from the philosophical perspective on economy developed by Georges Bataille, we demonstrate how the BBE is fully premised on a thinking of scarcity. As a result, the BBE exclusively frames economic problems in terms of efficient production, endeavoring to exclude a thinking of abundance and wastefulness. Our hypothesis is that this not only entails (...) a number of internal tensions and inconsistencies with regard to the ideal of BBE, but ultimately undermines the ideal itself, by pushing purported regenerativity into a cataclysmic and terminal discharge. We here point to the strategies that the BBE employs in this exclusion, the fundamental assumptions regarding the relation between energy and economy that underpin this endeavor, as well as to the resulting inconsistencies and their catastrophic consequences. We finally argue for the introduction of the presently excluded question of abundance and wastefulness and explore the implications of such a question for the ideal of a zero-waste humanity. (shrink)

The environmental concern of plastic waste (PW) generation has escalated to an alarming level due to the versatility and high demand in various applications. In order to search for an effective way to utilise PW, reusing them for the production of construction material appears as an environmentally-friendly approach. This is also because conventional construction materials often consume high energy during production has caused many environmental impacts. This review paper summarises the previous studies on reusing various PW as raw material (...) and aggregate for construction and its properties with special attention to bricks and paving blocks. This paper begins by illustrating on the properties of plastics and the impacts of PW to the environment. Followed by discussion on reusing PW and its impacts on the overall properties of construction material. This review found that limited studies had been conducted on the usage of PW in the production of the paving block. Besides, most of the studies focused predominantly on compressive strength and water absorption as the main parameters to evaluate the characteristics of bricks and paving blocks. It is concluded that the use of PW in construction material could possibly serve as a sustainable source for construction material in the future. (shrink)

Horror film sequels have not received as much serious critical attention as they deserve – this is especially true of the Saw franchise, which has suffered a general dismissal under the derogatory banner ‘Torture Porn’. In this article I use detailed textual analysis of the Saw series to expound how film sequels employ and complicate expected temporal and spatial relations – in particular, I investigate how the Saw sequels tie space and time into their narrative, methodological and moral sensibilities. Far (...) from being a gimmick or a means of ensuring loyalty to the franchise (one has to be familiar with the events of previous episodes to ascertain what is happening), it is my contention that the Saw cycle directly requests that we examine the nature of space and time, in terms of both cinematic technique and our lived, off-screen temporal/spatial orientations. -/- . (shrink)

Abstract— Polystyrene/waste tires composites were prepared in this study by incorporating shredded waste tires into polydisperse polystyrene in a melt-mixing method. The dynamic mechanical properties of PS and PS/composite have been evaluated and compared. These properties were studied using ARES-Rheometer under nitrogen atmosphere in parallel plate geometry with diameter 8 mm. The measurements are carried out over a wide range of temperatures ranged from 120°C to 220°C and frequencies from 100 to 0.1 radians per second. The shear creep (...) stress J(t) and loss factor were studied and compared with those of unfilled PS. The dynamic mechanical properties and stability at elevated temperatures were found to increase with the addition of waste tires to PS as confirmed by the results. From the results, the value of J(t) modulus for PS/waste tire is higher than this for the original material of PS. The incorporation of the rubber to the PS changes the value of J(t) at 0.001 second from 5.610-6 to 3.710-6 Pa-1 for PS and PS/waste tire, respectively and this difference increases with time. This confirmed that PS/waste tire composite exhibits higher stability at 180°C for a long time than the original unfilled PS. At frequency  = 6.7102 radians/s , the value of tan increases about 20% by the incorporation of the rubber filler, due to the increase in the G'' modulus particularly at low frequencies in the flow regime. (shrink)

E-waste, also known as waste from electrical and electronic equipment, is a solid waste that accumulates quickly due to high demand driven by the market for replacing newer electrical and electronic products. The global e-waste generation is estimated to be between 53.6 million tons, and it is increasing by 3–5% per year. Metals make-up approximately 30% of e-waste, which contains precious elements Au, Ag, Cu, Pt, and other high-value elements, valued at USD 57 billion, which (...) is driving the e-waste recycling industry. It is noteworthy that the recycling of precious elements from e-waste has emerged as a profitable enterprise in several parts of developing nations. E-waste contains 50–100 times higher levels of precious metals compared to natural ores, making it suitable for mining. E-waste recycling in developing nations, mostly occurs through the informal sector comprising manual collection, crushing, segregation and selling of precious elements, such as Au, Ag, Cu, Pb, Pt, and other rare elements (Nd, In, and Ga). The organized sector, on the other hand, mostly employs mechano-chemical methods, such as pyrometallurgy, hydrometallurgy, and bio-hydrometallurgy, which have serious environmental consequences. Both the informal and formal sectors of e-waste processing lead to the leaching of toxic elements into groundwater and soils. Owing to the lesser efficiency of greener technologies, such as phytoremediation and bioremediation, their use in precious metal extraction is very limited. However, this review explores several hyper-accumulating and tolerant plants viz. Brassica juncea and Berkheya coddii, which holds great potential in phytomining of precious metal from e-waste. Thus, the state of the art in precious metal extraction from e-waste as well as the advantages and disadvantages of different metal extraction technologies has been reviewed. (shrink)

This case study takes place in the context of a small urban supermarket chain. It examines the extent to which such firms should work to lower food waste on sustainability and human rights grounds. The scenario examines structural inefficiencies along the supply chain from food production to consumption, asking students to consider what power supermarkets have to correct these inefficiencies, and what ethical responsibility this may create for them to do so. Government regulations written to encourage or require food (...) purveyors to gift their excess supply to the needy are discussed. (shrink)

Despite the numerous benefits of natural solutions, potential challenges and limitations impede their widespread adoption. A recent paper suggests these obstacles may include financial issues through the stock market and eco-deficit of environmental companies and investors. Specifically, natural solutions, such as biological waste management methods utilizing organisms like black soldier flies, face challenges due to financial considerations and the prevailing eco-deficit culture within the business and investment sectors.

This study was conducted to analyze the direct and indirect relationship between education, perception and behaviors towards the plastic waste of high school students in Vietnam. The study uses data from a survey of 573 high school students in Vietnam. A cross-sectional study design and questionnaire survey method were used to collect data. Exploratory factor analysis (EFA), confirmatory factor analysis (CFA), descriptive statistics, reliability test Cronbach's Alpha and structural equation modelling (SEM) was used for statistical analysis. Research results show (...) that: Attitude factors play an mediating role in the relationship between education, perception and behavior towards plastic waste. The ¦ndings of this study provide the basis for proposing measures to improve behaviors towards plastic waste for Vietnamese high school students. (shrink)

The current study has two objectives: -/- Identify characteristics of landowners that are likely to waste the woody resources on their lands. Identify factors that can increase wasting-woody-resources landowners’ likelihood to cut and/or remove trees for sale for woody biomass-based energy shortly.

Abstract: In this work, polystyrene/waste tires composites were prepared using the melt-mixing method. The viscoelastic properties of PS and PS/composite have been evaluated and compared. These properties were studied using ARES-Rheometer under nitrogen atmosphere in parallel plate geometry with diameter 8 mm. The measurements are carried out over a wide range of temperatures ranged from 120°C to 220°C and frequencies from 100 to 0.1 radians per second. The dynamic and complex viscosity of the PS composites were studied and compared (...) with those of unfilled PS. The results showed that the frequency,  is shifted from 0.46 to 0.072 radians/s and the value of dynamic viscosity increases from 5.0104 to 1.3105 Pa.s by the addition of the rubber for PS. Zero-shear viscosity, 0 was found to be increased from is 9.5104 for PS/waste tire composite to 4.5104 for PS. The flow activation energy is calculated from 0 by using the rheometric software to be 1.063 105 and 1.46 105 J/mol.K for Ps and PS composite, respectively. (shrink)

Meritocracy claims to reward the meritorious with more resources, thereby achieving social efficiency and justice in a level playground. This article argues that the rise of meritocracy in a society is the institutional consequence of adopting progressive humanism, an ideal-type worldview that advocates the harmonious co-realization of individual achievement and social contribution. However, meritocracy is a self-defeating illusion because, even in a level playground, it only rewards conspicuous and wasteful display of ‘merit’ rather than genuine contributions to society. Similar to (...) the promise of an afterlife to Catholicism, the illusion of meritocracy constitutes an indispensable theodicy to progressive humanism. For societies holding such worldviews, meritocracy is a necessary illusion that cannot be dispelled by institutional reforms or political movements. (shrink)

Văn hóa thặng dư sinh thái là tập hợp các thái độ, giá trị, niềm tin và hành vi bảo vệ và tôn tạo môi trường được chia sẻ bởi một cộng đồng nhằm giảm tác động tiêu cực của con người tới môi trường, giúp bảo tồn và phục hồi thiên nhiên. Đây được xem là giải pháp để con người có thể sống hòa hợp với thiên nhiên và hướng tới bảo vệ môi trường một cách dài hạn (...) và bền vững. Việc phổ biến và xây dựng văn hóa thặng dư môi trường trên quy mô dân số lớn hẳn sẽ gặp nhiều khó khăn, nhưng không phải là không thể. Thành phố Kiel – có dân số xấp xỉ 250 nghìn người và cũng là thành phố đầu tiên của Đức nhận được chứng nhận Zero Waste (Không Rác thải) từ tổ chức Zero Watse Eurpoe (Không Rác thải Châu Âu) – là một ví dụ điển hình. (shrink)

The development of nuclear energy technologies in the second half of the 20th century came with great hopes of rebuilding nations recovering from the devasta-tion of the Second World War or recently released from colonial rule. In coun-tries like France, India, the USA, Canada, Russia, and the United Kingdom, nuclear energy became the symbol of development towards a modern and technologically advanced future. However, after more than six decades of experi-ence with nuclear energy production, and in the aftermath of the (...) Fukushima nuclear disaster, it is safe to say that nuclear energy production is not without its problems.Some of these problems have their origins in the very materiality of the technolo-gies involved. For example, not only does the use of highly radioactive materials give rise to risks for the current generation (e.g., in the potential for disaster when reactors melt down) but high-level radioactive waste from nuclear energy production presents a serious intergenerational problem for which an acceptable final solution or its implementation remains elusive. Moreover, nuclear energy technologies have specific social and political consequences. For example, they have been said to be authoritarian technologies (Winner, 1980), requiring cen-tralized authority, secrecy, and technocratic decision-making. While some of these problems could have been foreseen before nuclear energy technologies were introduced, others only arose after these technologies were already integrated into the social and infrastructural fabric of our lives. Addition-ally, new technologies (e.g., Generation III, III+ and IV reactors) are still being developed, bringing with them new and uncertain hazards and risks. Ignorance and uncertainty about the possible deleterious effects of introducing a new technology are inevitable, especially if the technology is complex, large time-scales are involved, or risks depend on social or political factors unforeseen in the design stage. However, this should not deter us from developing and intro-ducing new technologies. Rather, it should motivate us to organize these ‘exper-iments’ with new technologies in society in such a way that we can learn about their possible hazards and risks as effectively and responsibly as possible (van de Poel, 2011, 2015). In this way, it is possible to minimize risks and avoid unwant-ed moral, social or political developments. However, organizing such experi-ments responsibly also means that one could come to the conclusion that continuing an experiment is no longer responsible or desirable. Should we be prepared for such a scenario, and if so, how could we do that? One possible strategy to tackle this issue is that the technology and its introduction should be reversible. The aim of this thesis is to further explore this strategy by answering the following main research question (RQ) and accompanying subquestions (SQ):RQ: What are the implications of reversibility for the responsible develop-ment and implementation of nuclear energy technologies?SQ1: Under what conditions can nuclear energy technologies be considered reversible?SQ2: Why should nuclear energy technologies be reversible?SQ3: If so, how could the reversibility of nuclear energy technologies be achieved?After the introductory chapter 1, the chapters that form the main body of this dissertation each provide a distinct contribution to answering the three subques-tions and, by extension, the main research question. Guided by three historical case studies of nuclear energy technology development (i.e., India, France and the USA), chapter 2 answers the first subquestion by formulating the two condi-tions under which it can be considered reversible, i.e., 1) the ability to stop the further development and deployment of a that technology in society, and 2) the ability to undo the undesirable outcomes (material, institutional or symbolic) of the development and deployment of the technology. Chapter 3 subsequently tackles the second subquestion by establishing the general desirability of technological reversibility by virtue of its relation to responsibility in Emmanuel Levinas’ ethical phenomenology. It argues that technology development is a legitimate response to responsibility but inevitably falls short of the responsibility that inspires it, incessantly calling for technological and political change in the process. Having thus argued that nuclear energy technologies should ideally be reversible, chap-ters 4 and 5 work towards specific strategies to achieve technological reversibil-ity. Chapter 4 first investigates the processes that make it difficult to stop the further development and implementation of a nuclear energy technology in society, thus provid-ing input on how to fulfill the first condition for the reversibility of nuclear energy technologies. To do so, it presents a phenomenological perspective on technology and its adoption based on the work of Alfred Schutz. It also explores different ways in which technology adoption drives the processes of path depend-ence towards technological lock-in. Chapter 5 examines the history of geological disposal of high-level radioactive waste in the USA. It identifies a number of concrete policy pitfalls that could lead to lock-in and that should consequently be avoided. It also presents a number of general design strategies that could facilitate the undoing of undesirable consequences of a technology, thus providing input on how to fulfill the second condition for the reversibility of nuclear energy technol-ogies.Chapter 6 summarizes the central findings of the thesis and explains how these help to answer the research questions. On top of this, it reflects on a number of complications connected to reversibility considerations. Based on this, it is concluded that the question of irreversibility and reversibility is context- and technology-specific and a matter of degree. The chapter concludes with a reflec-tion on generalizations and limitations of the results. Finally, chapter 7 discusses the implications of this dissertation’s results for responsibly experimenting with nuclear energy technologies in society. (shrink)

Numerous agricultural wastes are impractically discarded every day, and one of these is rice bran. This study investigated the production of a biodegradable straw made of cassava starch and powdered rice bran. It aimed to determine the effectiveness of the different treatments of Cassava Starch-Rice Bran in terms of water resistance, tensile strength, and biodegradability. An experimental design was used in conducting the study. There were three treatments made in making CSRB straws: the first, with more rice bran; the second, (...) with the same cassava starch and rice bran ratio; and the third, with more cassava starch. These treatments produced three replicates each. The straws were placed in a dehydrating machine for 24 hours at a temperature of 60° Celsius. The straws were then coated with beeswax after being removed from their respective molders. The CSRB straws were found to be water resistant due to the beeswax coating applied, although it had a weak tensile strength even with the presence of beeswax. The rate of biodegradability of the CSRB straw was fast due to it being made up of organic materials. The results revealed that straws made from Cassava Starch and Powdered Rice Bran are effective in terms of water resistance and biodegradability. (shrink)

The contribution of the data paper publishing paradigm to the knowledge generation and validation processes is becoming substantial and pivotal. In this paper, through the information-processing perspective of Mindsponge Theory, we discuss how the data article publishing system serves as a filtering mechanism for quality control of the increasingly chaotic datasphere. The overemphasis on machine-actionality and technical standards presents some shortcomings and limitations of the data article publishing system, such as the lack of consideration of humanistic values, radical race for (...) big data, and inadequate use of expertise in data evaluation. Without addressing the shortcomings and limitations, the reusability of data will be hindered, and scientific investment to facilitate data sharing will be wasted. Thus, we suggest that the current data paper publishing paradigm needs to be updated with a new philosophy of data. (shrink)

Many people now recognize that the challenges of climate change and biodiversity loss are rooted in how and to what extent humans consume goods in the Anthropocene era. Consumerism has driven natural resource exploitation to its peak, and resource depletion is becoming more common. The beauty and personal care industry has an enormous market and substantial profitability, particularly in the high-income category. However, this benefit comes with the risk of being scrutinized, investigated, and criticized by civil society groups, environmental activists, (...) and consumers. More than anyone else, the industry is aware of the risks of negative society appraisals, notably the consequences of consumer-led boycott activities. In this paper, we suggest that, given the current situation, global beauty firms need to play a proactive role in directing resources toward the development of sustainable uses of biodiversity and agriculture methods. This includes advocating for the wider use of environmentally conscious sourcing of raw materials, avoiding excessive and wasteful packaging, and devoting resources to research and innovation in environmentally friendly manufacturing procedures. The proactiveness would allow them to demonstrate their environmental commitment and actively give customers persuasive evidence of their social responsibility through emission reduction and biodiversity protection actions, gradually building an environmental-healing culture in the beauty industry. (shrink)

Games may seem like a waste of time, where we struggle under artificial rules for arbitrary goals. The author suggests that the rules and goals of games are not arbitrary at all. They are a way of specifying particular modes of agency. This is what make games a distinctive art form. Game designers designate goals and abilities for the player; they shape the agential skeleton which the player will inhabit during the game. Game designers work in the medium of (...) agency. Game-playing, then, illuminates a distinctive human capacity. We can take on ends temporarily for the sake of the experience of pursuing them. Game play shows that our agency is significantly more modular and more fluid than we might have thought. It also demonstrates our capacity to take on an inverted motivational structure. Sometimes we can take on an end for the sake of the activity of pursuing that end. (shrink)

Periodical reports are important information sources for investors and society to monitor, contribute to, and allocate resources to listed companies contributing to environmental sustainability. This article provides a preliminary investigation into environment-related information disclosure in annual reports of 61 representative companies in Vietnam, a country that has a rapidly developing stock market and is highly vulnerable to the impacts of climate change. It was found that although most of the companies’ reports disclosed the goals to pursue sustainability and environmental protection (...) (over 93%), only one-third of them genuinely reported investment in or research on environmental directions. The proportion of companies reporting detailed information on greenhouse gas emissions, energy consumption, water consumption, and waste production is relatively low; even among leading companies in sustainable development, the reporting rates for these indicators remained below 60%. We suggest that a separate mandatory annual report on environmental issues will increase businesses’ and society’s consciousness of environmental impacts. Transparent disclosure of environmental information will also offer an avenue to empower society to monitor, participate, and steer businesses toward sustainable development, thereby fostering an eco-surplus culture throughout the economic system. (shrink)