One of the challenges faced by philosophers throughout history of philosophical thoughts, has always been and is to find an adequate answer to the question of quiddity and existence of time and space. Thus, the present study aims to elaborate on the question of space and time in Mulla Sadra’s philosophy and its relationship with outcomes of modern physics. The study also intends to conduct an analytical comparison between these two views and clarify newer aspects of this complicated and vague (...) question. According to principles of his thought system in his ontology and particularly his theory of substantial motion, Mulla Sadra’s view toward time has a closer concordance with findings of modern physicists like Albert Einstein. One of the most noticeable achievements of the present paper, considering ontological view of Mulla Sadra toward time, is to reach a comprehensive and vast view of the question of space and time covering space-time approach of theory of relativity and having the common issue of time in mind, develops an image of unity and connectivity of the world of nature with the four dimensions. The present study uses a documentary analysis research and uses library resources. The prominent works of Mulla Sadra and Einstein’ works on the Theory of Relativity were the main sources for this study. It is hoped that this view not only reveals further philosophical aspects of the issue of time but also help uncover newer approaches for physicists. (shrink)

The recent advent of high-resolution imaging and force spectroscopy using atomic force mi- croscopy (AFM) in organic and inorganic solutions opens the way to imaging a wide variety of surfaces and their solvent structure. However, to take full advantage of the high resolution and provide signicant new analytical capability, a detailed understanding of the background contrast mechanisms that lead to atomic and molecular resolution is critical. Without a theory that connects the measured force to atomic models of the surface and (...) tip of the microscope, the information that can be distilled from these measurements is limited. Molecular dynamics simulations show that the forces acting on the microscope tip result from the direct interaction between a tip and a surface and are entirely due to the structure of water around the tip and surface. (shrink)

In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can be 100 times lower (...) than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

MEMS is a structural technology, an example of the design and development of sophisticated, well integrated electronics systems and mechanical devices utilizing single-stage manufacturing techniques . Techniques for making the MEMS enables the components and equipment with performance and increased production are combined with the advantages of the ordinary, such as reducing the size of the physical volume, weight and cost and providing a basis for the production of non-manufacturing methods, the other is the reality of internal order Technology MEMS (...) and its micro-machining techniques are well versed in its application to an unprecedented range of MEMS devices over previous dependent fields (for example Biology and Microelectronics) These agents make MEMS far more comprehensive than IC microchips technology . (shrink)

Familiarity and attention to the reasons for the retraction of publications can prevent the rapid growth of these documents in the future. The ascending trend in the retraction of publications in the 10 countries is worrying, requiring the serious attention of scientific authors and policymakers.

Electrostatic nanocapacitors also benefit from a very short distance between their electrodes. Electrostatic nanocapacitors are unique in this respect. If the electrodes are far apart, like charges on their surface strongly repel each other. When the electrodes are placed closer together, the negative and positive charges on both sides balance these repulsive forces, and more total charge can be stored in a given area.

Note: Nanoelectronics technology has dedicated some very exciting materials to improve the sensing phenomenon. The use of various nanomaterials, including nanoparticles, nanotubes, nanotubes, and nanowires, causes faster identification and reproducibility in a much better way. The unique properties of nanomaterials such as high electrical conductivity, better shock tolerance, and sensitive responses such as versatile piezo-electric and color detection mechanisms are only results of the multitude of properties of nanomaterials. Different types of biosensors are propagated based on different types of nano (...) materials and their developmental and implicit aspects. Measurement of biological responses has assumed great importance in the current scenario of ever-dynamic environmental developments and altered hemostatic events occurring at the in vivo as well as intracorporeal level. Analyzing the behavior of changing materials is of great importance in areas such as pharmaceutical diagnostics, food quality screening, and environmental applications. (shrink)

In his Phenomenology of the Spirit, Hegel tries to explicate his claim that what he calls the System of Science should be organized merely through the "Life of Concept". In this paper, first, we will try to survey the role(s) Hegel assigns to the Concept in Phenomenology of Spirit. Then, we will examine his use of this term in Phenomenology of the Spirit and we will discuss the meanings of this term in that book. Thereafter We will discuss whether in (...) Phenomenology of the Spirit, Concept is finite (as we have seen in Kant's philosophy) and whether it is limited to an external limit or not, and eventually we will try to show that in Phenomenology of Spirit, the absolute knowledge should be understood not as attaining a pure and simple static truth, but it must be understood as infinite unity of Concept and in fact as infinite movement of it. In fact, drawing on the interpretations of Pippin, Houlgate, and Stern, we argue that in contrast to the prevailing interpretations in contemporary Hegel studies, at the end of the Phenomenology of Spirit, it is the concept that becomes absolute, not consciousness. (shrink)

Nowadays, many semiconductors such as silicon are used in a wide range of nanoelectronic devices. However, due to the range of thermal changes and its extremely high speed, nano diamond is only compared to gold nanoparticles, which is the second best nano semiconductor in the world. Nano graphite and graphene nano strips are electrically conductive due to cloud scattering. Active nano diamond particles with such features, especially electronic ones, can be the foundation of completely new types of powerful nano electronic (...) devices. (shrink)

An increase in the surface-to- volume ratio and changes in geometry and electronic structure have a strong impact on the chemical interactions of matter, and for example, the activity of small particles changes with changes in the number of atoms (and thus the size of the particles). Unlike today's nano-transistors, which behave based on the movement of a mass of electrons in matter, new devices follow the phenomena of quantum mechanics at the nano scale, in which the discrete nature of (...) electrons cannot be ignored. By reducing all the horizontal and vertical dimensions of the transistor, the electric charge density increases in different areas of the nano-transistor , or in other words, the number of electric charges per unit area of the nano-transistor increases. (shrink)

Devices based on organic materials can be mechanically flexible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make flexibility impossible in them. Makes. Properties such as strength, flexibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties of the (...) material by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

The antenna is considered as the primary means of absorbing electromagnetic waves in space and has its own engineering knowledge, which is very developed and extensive. In general, in order to receive the electromagnetic wave in space, the dimensions of the antenna must be in the order of the size of the input wavelength to its surface. Due to the very low dimensions of nano-sensors, nano-antennas need a very high operating frequency to be usable. The use of graphene greatly helps (...) to solve this problem. Wave propagation velocities in CNTs and GNRs can be up to 100 times slower than vacuum velocities, depending on the physical structure, temperature and energy. Accordingly, the resonant frequency of graphene-based nano-antennas can be twice as low as (nano-carbon) nano-antennas. (shrink)

nanological gates, in order to design nano-scale computers with dual-scale capabilities. All living biological systems function due to the molecular interactions of different subsystems. Molecular components (proteins and nucleic acids, lipids and carbohydrates, DNA and RNA) can be used as an inspirational strategy on how to design high-performance NEMS and MEMS that have the required features and characteristics. Considered. In addition, analytical and numerical methods are available for dynamic analysis and three-dimensional geometry, bonding and other properties of atoms and molecules. (...) Thus, electromagnetic and mechanical, and other physical and chemical properties can be studied. Nanostructures and nanosystems can be widely used in medicine and health. Possible applications of nanotechnology include: drug synthesis and drug delivery (therapeutic potential is greatly increased due to the effective direct delivery of new types of drugs to specific sites in the body), nanosurgery and nanotherapy Synthesis and detection of genomes, nano-scale stimuli and sensors (diagnosis and prevention of disease), design and implantation of non-rejection artificial organs and design of high performance nanomaterials. It is important that these technologies change the manufacture of materials, devices and systems. (shrink)

Note: NI_nanoparticle nickel nanoparticles is a strong conductor of electric current and its surface is shiny and polished. This element belongs to the group of iron and cobalt elementsUsing particles from the microscale to the nanoscale provides benefits for various scientific fields, but because a large percentage of their atoms is on the surface, nanomaterials can be highly reactive and pose risks. have a potential for humans. Nanoparticles are of great interest due to their wide application, both in industry and (...) in the natural sciences. While natural materials have constant physical properties regardless of size, the size of a nanoparticle determines its physical and chemical properties. Therefore, the properties of a material change as its size approaches the nanoscale and the percentage of atoms on the surface of the material becomes significant. The important feature of all nano structures is that in which the number of surface atoms is more than the number of volume atoms. This ratio increases with decreasing nanoparticle size. Therefore, the size of the nanoparticle is considered its most important feature. The range of activity of nanoparticles depends on the nature and shape of the nanostructure. However, if the energy of the nanoparticle field is comparable to the energy of electromagnetic radiation and if in a certain range a wavelength with the occurrence of chemical reactions in materials Under irradiation, significant changes will be made in the activity of nanoparticles up to 100 nm in size. is the nanometer expected to be used for storage. Given the relatively large (physically speaking) storage devices we have now and the fact that we need gigabyte sizes in various areas, there is a high potential for activity in this There is a context. Each quantum dot consists of a discrete ball of several hundred atoms that can have one of two magnetic states. This allows them to contain a single bit of information (zero or one), as is customary in machine computing. In conventional hard disks, the data bits must be spaced far enough apart that they do not overlap. Quantum dots act as completely independent units that are not structurally connected, so they can become somewhat closer to each other. One of the new information storage tools is the use of nickel quantum dots in nanometer sizes, which are expected to be used to store terabytes of data. (shrink)

In addition to that, the presence of particles prevents the selective reaction of internal nanotubes, and this issue of purity confuses nanotubes based on their size, type, or use as macromolecular species. Absorption spectroscopy (NIR-Vis-UV) can be used to check the population of the sample or the degree of grouping of the sample. If how to distribute nanotubes by NIR-Vis-UV absorption spectroscopy is desired, the sample should be dispersed or in the form of a thin layer. Optical absorption measurements provide (...) useful information about the electronic properties of SWCNTs, and this information can be used to study covalent and non-covalent interactions between molecules and nanotubes. (shrink)

The antenna is considered as the primary means of absorbing electromagnetic waves in space and has its own engineering knowledge, which is very developed and extensive. In general, in order to receive the electromagnetic wave in space, the dimensions of the antenna must be in the order of the size of the input wavelength to its surface. Due to the very low dimensions of nano-sensors, nano-antennas need a very high operating frequency to be usable. The use of graphene greatly helps (...) to solve this problem. Wave propagation velocities in CNTs and GNRs can be up to 100 times slower than vacuum velocities, depending on the physical structure, temperature and energy. Accordingly, the resonant frequency of graphene-based nano-antennas can be twice as low as (nano-carbon) nano-antennas. (shrink)

Note: Many types of nanosensors are designed using CP nanomaterials for nanobiological applications. (Conductive surface) The oxidation of conductive polymeric materials is easily altered by redox mechanisms, and the charge transfer properties of these materials are affected by structural parameters, such as diameter and dimensions. CP materials are able to provide sensitive and rapid responses to specific biological and chemical species. Techniques such as chemical polymerization are often used to make CP nanomaterials. Manufacturing strategies can be divided into three categories: (...) hard mold synthesis, soft mold synthesis, and mold-free synthesis. The most widely used conductive polymers in nanosensors are nanomaterials made from CP due to their unique chemical and electrical properties resulting from the properties of their pie-electron nanosystem. Many modeling and functionalization technologies are being developed to control the location, distribution, amount, or structure and orientation of biological nanomolecules at the nanomaterial level. Therefore, our level of contact between biological nanomolecules and nanomaterials is of particular importance in countless applications. Covalent and non-covalent modifications are two general methods for coupling biological molecules and CP nanomaterials. Covalent functionalization is a chemical process in which a strong bond or relationship between nanomaterials and biological molecules is formed. In many cases, surface chemical modifications are required to create active groups that can bind to biomolecules. Unlike covalent functionalization, in the non-covalent method, nanomolecules can be removed without destroying the geometric and electronic structure on the surface. Nanomaterials are formed. Conclusion : The large surface-to-volume ratio in nanostructures and the high potential for signal amplification provide ideal conditions for marking and detecting biological elements in the structure of nanosensors. (shrink)

based on organic materials can be mechanically exible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make exibility impossible in them. Makes. Properties such as strength, exibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties of the material (...) by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

Note: In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. -/- The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can be 100 (...) times lower than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

Signal measurement Electrochemical methods are very suitable for detecting direct DNA oxidation because electrochemical reactions directly generate electronic signals and therefore do not require expensive converters. In addition, in this process, because the order of the immobilized game can be limited to onlya series of electrode substrates, the act of tracking is performed by a series of in expensive electrochemical analyzes. Electrochemical sensors are used to perform clinical or environmental tests; The basis of the sensitivity of electrochemical signals to direct (...) oxidation orinterval catalysis of DNA is also based on the reduction reactions of reporter molecules or enzymes. (shrink)

Production of nano supercapacitors using nanoparticles that can be polarized so that electrical energy can be stored. Nanostructure multilayer technology (solid state) is a known dielectric material used in nano supercapacitors because it is a piezoelectric and ferroelectric material. In this work, by creating passive filters, they provide storage between different types of these electric nano layers. The degree of electrical properties in solid materials (nanosupercapacitors) is very diverse. Based on the amount of resistance (nano supercapacitors) against the passage of (...) electric current, different materials can be divided into categories classified as conductor, semiconductor, and insulator. Meanwhile, in superconductors, there is a different mechanism to guide electrons. (Nano supercapacitors) can be defined as the number of free electrons that move freely in the material under the influence of an external electric field, as well as mobility, which is a measure of the ability and speed of free electrons to move, attributed. (shrink)

Nanowires ( SiNWs) have high mobility and surface-to-volume ratio, which makes them easy to control using a weak electric field. These one-dimensional nanostructures are created from nanowires with a diameter in the range of nanometers and a length of more than a micrometer. It has been done in the manufacture of nanowires through regular one-dimensional arrays with the help of different physical and chemical methods. Methods such as the use of electron beam or lithography method, heavy ion irradiation, laser, chemical (...) and electrochemical methods such as water heat and spontaneous assembly methods used to make the membranes of molds can also be used . In making one-dimensional nanostructures such as Oligophenylene vanillin nanowires The electro-accumulation method consists of three general steps: firstly, the creation of a porous template as a suitable substrate and framework for the accumulation of nanowires, secondly, the growth of nanowires along the cavities of the template, and thirdly, removing the template and separating the nanowires from it. The nanowires are directly dependent on the characteristics of the mold surface such as the size distribution of the holes, the density of the holes and the superiority of the surface of the nano-holes. In order to control the properties of Oligophenylene vanillin nanowires, parameters that are effective in the formation and optimization of the diameter of the holes and the thickness of the mold should be considered. (shrink)

Graphene nanomemories have been developed molecularly, providing excellent programmable nanoscale memory performance compared to previous graphene memory devices and a memory window. Large (12V), fast switching speed (1 microsecond), shows strong electrical reliability. Graphene molecular nanomemories show unique electronic properties, and their small dimensions, structural strength, and high performance make them a charge storage medium for Nano memory applications. We use a set of techniques involving a solution of nanoparticles, which creates a very thin layer on the target substrate and (...) is used as a sacrificial layer during the nanopatterning process. (shrink)

In a nMOS graphene field effect transistor, the resistance between two electrodes can be transferred or controlled by a third electrode. In a multilayer graphene field effect nMOS transistor, the current between the two electrodes is controlled by the electric field from the third electrode. Unlike the bipolar transistor, it is capacitively connected to the third electrode and is not in contact with the semiconductor. Three electrodes in the structure of the nMOS graphene field effect transistor are connected to the (...) source, drain and gate, and this action increases the switching speed (doping) in the nMOS graphene transistor circuit. (shrink)