Production of nano supercapacitors using nanoparticles that can be polarized so that electrical energy can be stored. Nanostructure multilayer technology (solid state) is a known dielectric material used in nano supercapacitors because it is a piezoelectric and ferroelectric material. In this work, by creating passive filters, they provide storage between different types of these electric nano layers. The degree of electrical properties in solid materials (nanosupercapacitors) is very diverse. Based on the amount of resistance (nano supercapacitors) against the passage of (...) electric current, different materials can be divided into categories classified as conductor, semiconductor, and insulator. Meanwhile, in superconductors, there is a different mechanism to guide electrons. (Nano supercapacitors) can be defined as the number of free electrons that move freely in the material under the influence of an external electric field, as well as mobility, which is a measure of the ability and speed of free electrons to move, attributed. (shrink)

In a nMOS graphene field effect transistor, the resistance between two electrodes can be transferred or controlled by a third electrode. In a multilayer graphene field effect nMOS transistor, the current between the two electrodes is controlled by the electric field from the third electrode. Unlike the bipolar transistor, it is capacitively connected to the third electrode and is not in contact with the semiconductor. Three electrodes in the structure of the nMOS graphene field effect transistor are connected to the (...) source, drain and gate, and this action increases the switching speed (doping) in the nMOS graphene transistor circuit. (shrink)

Familiarity and attention to the reasons for the retraction of publications can prevent the rapid growth of these documents in the future. The ascending trend in the retraction of publications in the 10 countries is worrying, requiring the serious attention of scientific authors and policymakers.

MEMS is a structural technology, an example of the design and development of sophisticated, well integrated electronics systems and mechanical devices utilizing single-stage manufacturing techniques . Techniques for making the MEMS enables the components and equipment with performance and increased production are combined with the advantages of the ordinary, such as reducing the size of the physical volume, weight and cost and providing a basis for the production of non-manufacturing methods, the other is the reality of internal order Technology MEMS (...) and its micro-machining techniques are well versed in its application to an unprecedented range of MEMS devices over previous dependent fields (for example Biology and Microelectronics) These agents make MEMS far more comprehensive than IC microchips technology . (shrink)

Nano fullerenes with the ability to store electrostatic energy that can be used as nano supercapacitors with very high capacity. Also, with these nanotubes, the nervous network can be repaired. Carbon nano fullerenes are allotropes of carbon such as diamond and graphite. These compounds are made of carbon and take on spherical and elliptical shapes. Those that are spherical are called buckyballs.Fullerenes do not have much chemical activity. The width of the graphite plate is about a few nanometers. The length (...) of the nanotubes ranges from a few micrometers to less than a meter. Their unique molecular structure creates unusual macroscopic properties. Nano supercapacitor can store 100 times more energy than previous devices of its kind. Finally, such devices can store waves of energy from renewable sources such as wind and deliver that energy to the power grid when needed. In general, nanoelectric supercapacitors can store large amounts of energy, but they tend to charge slowly and wear out quickly. Meanwhile, capacitors have a longer life and can be discharged quickly, but store much less total energy. In order to make nano supercapacitors, nanostructured arrays of electrostatic capacitors can be created.Electrostatic nanocapacitors are the simplest type of electronic energy storage device. They store electrical charge on the surface of two metal electrodes separated by an insulating material. The electrical storage capacity of the nano supercapacitor is directly proportional to the surface area of these sandwich-like electrodes. (shrink)

FinFEET nanotransistors are field-effect nanotransistors (metal-oxide-semiconductor) that are made on asubstrate. The gate is located on two, three, or four sides of the channel or is wrapped. The channel forms adouble gate structure. These devices are given the general name "finfets" because the source/drain region formsfins on the silicon surface. FinFET devices, compared to flat technology and using nanowires in the structureand (complementary metal oxide and semiconductor), < a i=8>have significantly faster switching and highercurrent density.Due to the reduction of the (...) scale of semiconductor components and integrated circuits to thenanometer range, in the FinFET nanotransistor, the reduction of scale causes more short channel effects, lessgate control, an exponential increase in leakage currents, severe process changes, and power densities tobecome unmanageable. The connection between the carbon and metal nanotubes used to connect the sourceand the drain forms the Schottky barrier (SB) in a FinFET nanotransistor. The formation of Schottky barriers inthe source and drain of a transistor causes a significant decrease in the drain current of FinFET nanotransistors. (shrink)

Nanowires ( SiNWs) have high mobility and surface-to-volume ratio, which makes them easy to control using a weak electric field. These one-dimensional nanostructures are created from nanowires with a diameter in the range of nanometers and a length of more than a micrometer. It has been done in the manufacture of nanowires through regular one-dimensional arrays with the help of different physical and chemical methods. Methods such as the use of electron beam or lithography method, heavy ion irradiation, laser, chemical (...) and electrochemical methods such as water heat and spontaneous assembly methods used to make the membranes of molds can also be used . In making one-dimensional nanostructures such as Oligophenylene vanillin nanowires The electro-accumulation method consists of three general steps: firstly, the creation of a porous template as a suitable substrate and framework for the accumulation of nanowires, secondly, the growth of nanowires along the cavities of the template, and thirdly, removing the template and separating the nanowires from it. The nanowires are directly dependent on the characteristics of the mold surface such as the size distribution of the holes, the density of the holes and the superiority of the surface of the nano-holes. In order to control the properties of Oligophenylene vanillin nanowires, parameters that are effective in the formation and optimization of the diameter of the holes and the thickness of the mold should be considered. (shrink)

Note: In electrical conduction from a conductor to a semiconductor or an electrically changeable insulator, nanotubes depend on their molecular chiral structure and angle. Since carbon nanotubes are able to pass electric current through the ballistic transfer of electrons without friction from their surface-this current is a hundred times higher than the current that passes through a copper wire-the nanotube is an ideal choice for building nano memory cloud chips. Creating chipsNano memory cloud-Nano memory cloud is made of carbon nanotubes. (...) Although the discovery of small carbon nanotubes has been very resistant, flexible, and conductive, with dimensions equal to DNA strands, and the use of small organic molecules to absorb charge instead of charge storage capacitors in nanotype memory chips. Nanocrystals, whose use causes The life span of nano memories to increase, is involved. Indeed, using nanotechnology, the storage capacity of information can be increased by a thousand times or more. Storing information is a very important and necessary topic that can be addressed in different ways through the cloud and nano memories. One of the new tools for storing information is the use of nickel quantum dots in nanometer sizes, which are expected to be used to store terabytes of data. According to cloud nano memories, there is high potential for activity in this field. The structure and design of supercapacitors based on nanoelectronics store 100 times more charge than electrolyte types in the same volume and are charged and discharged much faster than batteries. (shrink)

Graphene nanomemories have been developed molecularly, providing excellent programmable nanoscale memory performance compared to previous graphene memory devices and a memory window. Large (12V), fast switching speed (1 microsecond), shows strong electrical reliability. Graphene molecular nanomemories show unique electronic properties, and their small dimensions, structural strength, and high performance make them a charge storage medium for Nano memory applications. We use a set of techniques involving a solution of nanoparticles, which creates a very thin layer on the target substrate and (...) is used as a sacrificial layer during the nanopatterning process. (shrink)

In the immersion method, nanowires have enough time to transfer from nanoparticle particles to cavities ; The formation step of uniform nanoparticles is done slowly and finally uniform nanowires are formed. Structural study with FESEM in the immersion method of single-stranded nanowires in all porosities and in a large area of nanowire particles are formed. Changing the Sr / Fe ratio does not change the morphology of the nanowires. And spectroscopy of nanowires with a ratio of Sr / Fe states (...) within the nano-particles inside (nanowires uniform) elements Fe and Sr of ferrite strontium in spectroscopy nanowires uniform is seen in the sample of nanoparticles Sr / Fe to value Its stoichiometry is closer to that of nanoparticles in electromagnetic composition, while due to the lower solubility of uniform strontium nanowire nanomolecules compared to iron nitrate and the consequent presence of less strontium ions in reaction with electromagnetic nanoparticles. There is more Fe ion in the final structure. Electro-magnetically active particles are used to separate uniform nanowires at ambient temperature . In the application of nanowires in nanoscale electronics or some other applications, it is necessary to separate the nanowires from alumina particles . (shrink)

In addition to that, the presence of particles prevents the selective reaction of internal nanotubes, and this issue of purity confuses nanotubes based on their size, type, or use as macromolecular species. Absorption spectroscopy (NIR-Vis-UV) can be used to check the population of the sample or the degree of grouping of the sample. If how to distribute nanotubes by NIR-Vis-UV absorption spectroscopy is desired, the sample should be dispersed or in the form of a thin layer. Optical absorption measurements provide (...) useful information about the electronic properties of SWCNTs, and this information can be used to study covalent and non-covalent interactions between molecules and nanotubes. (shrink)

In smart electronic nano-structures, the concept of Nano -assemblies is summed up in all the information and codes necessary to produce an entity similar to itself. We have a very small machine that knows how to produce similar to itself , which in nano science is called a "nano-assembler". It is interpreted.

The development of biosensors to measure the concentration of dissolved oxygen in the blood began. This sensor is also called COBD because it covers the surface of the electrode with an enzyme whose constituent is sometimes called (electro-calorie). Later, it helped oxidize glucose. This sensor was used to measure blood sugar. In the same Bapvshandn electrode, an enzyme that has the ability to convert urea into ammonium carbonate in the electrode material ++ ion, NH4, was used to create biosensors that (...) could measure the urea in the blood or urine. Each of these two early biosensors used a different transducer in its signal conversion section . In the first type, blood sugar was measured by measuring the electric current generated (ammetric),while in the urea sensor, the urea concentration was measured based on the electric charge created sensors are made (.Potentiometric) may someday the patient without having to visit a doctor and only on the basis of information that a COBD or Doctor-Board-on-Chip provides, the type of disease has been detected. And then injected into the blood. This will drastically reduce the dosage of the required drugs directly from the side effects of the Effect-Side drug , because the drug is very low and is also sent to the required place in the body. The drug acts directly on a biosensor that converts the biological response into an electrical signal and consists of two main components: the receptor and the detector. The ability to select one biosensor is determined by the receiving section. Enzymes, antibodies, and lipid layers are good examples of receptors. The task of the detector is to convert the physical or chemical changes by detecting the material to be analyzed into an obvious factor that the detectors can select in the type of reaction of the electrical signal. They do not have the perfect .They are electrochemical, optical, piezoelectric, and thermal. In the type of electrochemistry the action takes place in one of the following ways: amperometric, potentiometric, and impedance. The most common electrodes used in the potentiometric type include: the Glass electrode, the Selective-Ion ion electrode, and the FET sensitive-Ion ion field-effect transistor or ISFET. In general, a biosensor consists of an immobilized static biological system, such as a cell bundle, a micro enzyme, or an antibody, and a measuring. In the presence of a certain molecule, the biological system changes the properties of the environment. (shrink)

Nanowires are less than 100 nm in diameter and can be as small as 3 nm. Typically, nanowires are more than 1000 times larger than their diameter. This huge difference in length-to-diameter ratio compared to nanowires is often referred to as 1D materials. This leads to unique properties not seen in bulk materials, The minute size of nanowires means that the quantum mechanical effects of are of great importance. "Quantum Wires" They use quantum mechanics to produce wires with a wide (...) range of unique electrical properties. These features include quantum tunneling, which allows wires made of carbon nanotubes to conduct very high with electrons passing through the wire in a ballistic manner. > In the immersion method, nanowires have enough time to transfer from the particles of nanowires to the holes ; The step of forming uniform nanoparticles is done slowly and finally uniform nanowires are formed. (shrink)

nanological gates, in order to design nano-scale computers with dual-scale capabilities. All living biological systems function due to the molecular interactions of different subsystems. Molecular components (proteins and nucleic acids, lipids and carbohydrates, DNA and RNA) can be used as an inspirational strategy on how to design high-performance NEMS and MEMS that have the required features and characteristics. Considered. In addition, analytical and numerical methods are available for dynamic analysis and three-dimensional geometry, bonding and other properties of atoms and molecules. (...) Thus, electromagnetic and mechanical, and other physical and chemical properties can be studied. Nanostructures and nanosystems can be widely used in medicine and health. Possible applications of nanotechnology include: drug synthesis and drug delivery (therapeutic potential is greatly increased due to the effective direct delivery of new types of drugs to specific sites in the body), nanosurgery and nanotherapy Synthesis and detection of genomes, nano-scale stimuli and sensors (diagnosis and prevention of disease), design and implantation of non-rejection artificial organs and design of high performance nanomaterials. It is important that these technologies change the manufacture of materials, devices and systems. (shrink)

In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can be 100 times lower (...) than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

Note: NI_nanoparticle nickel nanoparticles is a strong conductor of electric current and its surface is shiny and polished. This element belongs to the group of iron and cobalt elementsUsing particles from the microscale to the nanoscale provides benefits for various scientific fields, but because a large percentage of their atoms is on the surface, nanomaterials can be highly reactive and pose risks. have a potential for humans. Nanoparticles are of great interest due to their wide application, both in industry and (...) in the natural sciences. While natural materials have constant physical properties regardless of size, the size of a nanoparticle determines its physical and chemical properties. Therefore, the properties of a material change as its size approaches the nanoscale and the percentage of atoms on the surface of the material becomes significant. The important feature of all nano structures is that in which the number of surface atoms is more than the number of volume atoms. This ratio increases with decreasing nanoparticle size. Therefore, the size of the nanoparticle is considered its most important feature. The range of activity of nanoparticles depends on the nature and shape of the nanostructure. However, if the energy of the nanoparticle field is comparable to the energy of electromagnetic radiation and if in a certain range a wavelength with the occurrence of chemical reactions in materials Under irradiation, significant changes will be made in the activity of nanoparticles up to 100 nm in size. is the nanometer expected to be used for storage. Given the relatively large (physically speaking) storage devices we have now and the fact that we need gigabyte sizes in various areas, there is a high potential for activity in this There is a context. Each quantum dot consists of a discrete ball of several hundred atoms that can have one of two magnetic states. This allows them to contain a single bit of information (zero or one), as is customary in machine computing. In conventional hard disks, the data bits must be spaced far enough apart that they do not overlap. Quantum dots act as completely independent units that are not structurally connected, so they can become somewhat closer to each other. One of the new information storage tools is the use of nickel quantum dots in nanometer sizes, which are expected to be used to store terabytes of data. (shrink)

Oligophenylene vanillin nanowires (Si Silicon / Germanium Gi) , narrow structures whose diameter is only a few billionths of a meter but thousands or millions of times longer. They exist in various forms—made of metals, semiconductors, insulators, and organic compounds—and are used for applications in the fields of electronics, energy conversion, optics, and chemical sensing. Because of their extreme thinness, Oligophenylene vanillin nanowires with a (Si Silicon / Germanium Gi) structure are essentially one dimensional. Nanowires are quasi-one-dimensional materials, "their two (...) dimensions are on the nanometer scale." This one-dimensionality confers distinct electrical and optical properties. (shrink)

An increase in the surface-to- volume ratio and changes in geometry and electronic structure have a strong impact on the chemical interactions of matter, and for example, the activity of small particles changes with changes in the number of atoms (and thus the size of the particles). Unlike today's nano-transistors, which behave based on the movement of a mass of electrons in matter, new devices follow the phenomena of quantum mechanics at the nano scale, in which the discrete nature of (...) electrons cannot be ignored. By reducing all the horizontal and vertical dimensions of the transistor, the electric charge density increases in different areas of the nano-transistor , or in other words, the number of electric charges per unit area of the nano-transistor increases. (shrink)

Objectives: To explore individuals’ perception of the personal, family and societal educational needs following a spinal cord injury. Methods: Sixty-one patients who sustained a traumatic SCI between March 2015 and June 2016 referred to Brain and Spinal Cord Injury Research Center were included in a cross sectional study and completed an online survey containing open-and closed-ended questions, in Iran. Participants’ responses were analyzed i using a qualitative approach with a thematic analysis. Results: Following a thematic analysis of the patient’s perceived (...) educational needs, 3 themes and 14 subthemes were identified. The 3 themes included personal, family, and societal educational perceived needs. Within personal educational needs, there were 7 subthemes which included personal independence and transportation, financial independence, life skills modification, knowledge about SCI, prevention of SCI complications, relationships and sexual function, and psychological adjustments. Among family educational needs, the 3 subthemes were caregiver skills and communication, first aid and emergency skills, and emotional and psychological support. For societal educational needs, the 4 subthemes described were social integration, interpersonal communication skills, SCI awareness and injury prevention, sympathize while avoiding pity. Conclusion: According to our findings, people with SCI have various needs that need to be addressed. Educational support should be a part of a comprehensive rehabilitation program and geared towards addressing the patients’ personal and family needs, while educating the community about SCI in order to allow for reintegration into society. (shrink)

The antenna is considered as the primary means of absorbing electromagnetic waves in space and has its own engineering knowledge, which is very developed and extensive. In general, in order to receive the electromagnetic wave in space, the dimensions of the antenna must be in the order of the size of the input wavelength to its surface. Due to the very low dimensions of nano-sensors, nano-antennas need a very high operating frequency to be usable. The use of graphene greatly helps (...) to solve this problem. Wave propagation velocities in CNTs and GNRs can be up to 100 times slower than vacuum velocities, depending on the physical structure, temperature and energy. Accordingly, the resonant frequency of graphene-based nano-antennas can be twice as low as (nano-carbon) nano-antennas. (shrink)

The antenna is considered as the primary means of absorbing electromagnetic waves in space and has its own engineering knowledge, which is very developed and extensive. In general, in order to receive the electromagnetic wave in space, the dimensions of the antenna must be in the order of the size of the input wavelength to its surface. Due to the very low dimensions of nano-sensors, nano-antennas need a very high operating frequency to be usable. The use of graphene greatly helps (...) to solve this problem. Wave propagation velocities in CNTs and GNRs can be up to 100 times slower than vacuum velocities, depending on the physical structure, temperature and energy. Accordingly, the resonant frequency of graphene-based nano-antennas can be twice as low as (nano-carbon) nano-antennas. (shrink)

Devices based on organic materials can be mechanically flexible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make flexibility impossible in them. Makes. Properties such as strength, flexibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties of the (...) material by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

Nowadays, many semiconductors such as silicon are used in a wide range of nanoelectronic devices. However, due to the range of thermal changes and its extremely high speed, nano diamond is only compared to gold nanoparticles, which is the second best nano semiconductor in the world. Nano graphite and graphene nano strips are electrically conductive due to cloud scattering. Active nano diamond particles with such features, especially electronic ones, can be the foundation of completely new types of powerful nano electronic (...) devices. (shrink)

One of the challenges faced by philosophers throughout history of philosophical thoughts, has always been and is to find an adequate answer to the question of quiddity and existence of time and space. Thus, the present study aims to elaborate on the question of space and time in Mulla Sadra’s philosophy and its relationship with outcomes of modern physics. The study also intends to conduct an analytical comparison between these two views and clarify newer aspects of this complicated and vague (...) question. According to principles of his thought system in his ontology and particularly his theory of substantial motion, Mulla Sadra’s view toward time has a closer concordance with findings of modern physicists like Albert Einstein. One of the most noticeable achievements of the present paper, considering ontological view of Mulla Sadra toward time, is to reach a comprehensive and vast view of the question of space and time covering space-time approach of theory of relativity and having the common issue of time in mind, develops an image of unity and connectivity of the world of nature with the four dimensions. The present study uses a documentary analysis research and uses library resources. The prominent works of Mulla Sadra and Einstein’ works on the Theory of Relativity were the main sources for this study. It is hoped that this view not only reveals further philosophical aspects of the issue of time but also help uncover newer approaches for physicists. (shrink)

In this eleventh book of scilogs – called in-turns and out-turns –, one may find new and old questions and solutions, referring mostly to topics on Neutrosophy, but also Multispace, with miscellaneous addition of topics on Physics, Mathematics, or Sociology – email messages to research colleagues, or replies, notes about authors, articles, or books, spontaneous ideas, and so on. -/- Exchanging ideas with Prem Kumar Singh, Feng Liu, Nicolae Bălașa, Jimmy Quellet, Minodora Rușchița, Frank Gelli, A. R. Vătuiu, Victor Christianto, (...) Vladimir I. Rogozhin, Robert Neil Boyd, Akira Kanda, Stefan Spaarmann, Oliver Consa, Yabin Shao, Junle Zhuo, Nivetha Martin, Said Broumi, Jean Dezert, Erick González, Tomasz Witczak, B. De Baets, I. Couso, D. Dubois, L. Good, Mihaela Colhon, Atiqe Ur Rahman, Muhammad Saeed, Muhammad Ihsan, Edeline Nancy, Shawkat Alkhazaleh, Shazia Rana, Vasantha Kandasamy, Santanu Acharjee, Mohamed Al-Shmrani, Parimala Manie, Mehmet Unver, Murat Olgun, Adel Aleidhri, Akira Kanda, Ilanthenral Kandasamy, Mircea Zărnescu, R. Tayebi Khorami, Arsham Borumand Saeid, Maisam Jdid, M. Abobala, Riad Hamido, Rafael Rojas, Esmaeil Zarei, Faisal Khan, Rouzbeh Abbassi, Adel Al-Odhari, Henry Garrett, Ackbar Rezaei, Saeid Jafari, Karthika Muthusamy, Harish Garg, Huda E. Khalid, Gonca D. Güngör, Muslim A. Noah Zainal, Fakhry Asad Agusfrianto, Madeleine Al-Tahan, Mariam Hariri, Yudi Mahatma, Masoud Ghods, Marco Brigliadori, Luis Enrique Aponte Pérez, Amr Mohammed, M. Aslam (in order of reference in the book). (shrink)