An increase in the surface-to- volume ratio and changes in geometry and electronic structure have a strong impact on the chemical interactions of matter, and for example, the activity of small particles changes with changes in the number of atoms (and thus the size of the particles). Unlike today's nano-transistors, which behave based on the movement of a mass of electrons in matter, new devices follow the phenomena of quantum mechanics at the nano scale, in which the discrete (...) nature of electrons cannot be ignored. By reducing all the horizontal and vertical dimensions of the transistor, the electric charge density increases in different areas of the nano-transistor , or in other words, the number of electric charges per unit area of the nano-transistor increases. (shrink)

nanological gates, in order to design nano-scale computers with dual-scale capabilities. All living biological systems function due to the molecular interactions of different subsystems. Molecular components (proteins and nucleic acids, lipids and carbohydrates, DNA and RNA) can be used as an inspirational strategy on how to design high-performance NEMS and MEMS that have the required features and characteristics. Considered. In addition, analytical and numerical methods are available for dynamic analysis and three-dimensional geometry, bonding and other properties of atoms and (...) molecules. Thus, electromagnetic and mechanical, and other physical and chemical properties can be studied. Nanostructures and nanosystems can be widely used in medicine and health. Possible applications of nanotechnology include: drug synthesis and drug delivery (therapeutic potential is greatly increased due to the effective direct delivery of new types of drugs to specific sites in the body), nanosurgery and nanotherapy Synthesis and detection of genomes, nano-scale stimuli and sensors (diagnosis and prevention of disease), design and implantation of non-rejection artificial organs and design of high performance nanomaterials. It is important that these technologies change the manufacture of materials, devices and systems. (shrink)

As the Philippines continues to grapple with the effects of the COVID-19 pandemic, new modalities of instruction are being devised by the administration of Rodrigo Duterte, through the Department of Education (DepEd). Among these are what the DepEd provided as self-learning modules (SLMs) combined with “alternative learning delivery modalities” which include radio-based instruction (DepEd 2020). The SLMs and radiobased instruction are the most common modalities of learning, being the most accessible especially for the poor students of the country. This paper (...) will examine the pedagogical and political dimensions of a radio-based instruction. Coming from the tradition of philosophy of technology that emphasizes the political nature of technology, I will argue how the logic of radio broadcasting predetermines a specific pedagogy and form of communication. I will further argue how this predetermined form of communication carries the danger of being an effective support for authoritarianism. (shrink)

The antenna is considered as the primary means of absorbing electromagnetic waves in space and has its own engineering knowledge, which is very developed and extensive. In general, in order to receive the electromagnetic wave in space, the dimensions of the antenna must be in the order of the size of the input wavelength to its surface. Due to the very low dimensions of nano-sensors, nano-antennas need a very high operating frequency to be usable. The use of graphene (...) greatly helps to solve this problem. Wave propagation velocities in CNTs and GNRs can be up to 100 times slower than vacuum velocities, depending on the physical structure, temperature and energy. Accordingly, the resonant frequency of graphene-based nano-antennas can be twice as low as (nano-carbon) nano-antennas. (shrink)

The nature and structure of time and time-intervals in physical, chemical and biological systems will be elucidated. The relation and dependence among time, energy and taking place of natural processes will be critically analyzed. The bio-processes taking place in nano-time intervals will be identified. Their relevance to nano-bio-science and nano-bio-technology will be developed and nano-time interval-aspect of nano-sciences and nano-technology will be advanced. -/- .

Nowadays, many semiconductors such as silicon are used in a wide range of nanoelectronic devices. However, due to the range of thermal changes and its extremely high speed, nano diamond is only compared to gold nanoparticles, which is the second best nano semiconductor in the world. Nano graphite and graphene nano strips are electrically conductive due to cloud scattering. Active nano diamond particles with such features, especially electronic ones, can be the foundation of completely new (...) types of powerful nano electronic devices. (shrink)

Production of nano supercapacitors using nanoparticles that can be polarized so that electrical energy can be stored. Nanostructure multilayer technology (solid state) is a known dielectric material used in nano supercapacitors because it is a piezoelectric and ferroelectric material. In this work, by creating passive filters, they provide storage between different types of these electric nano layers. The degree of electrical properties in solid materials (nanosupercapacitors) is very diverse. Based on the amount of resistance (nano supercapacitors) (...) against the passage of electric current, different materials can be divided into categories classified as conductor, semiconductor, and insulator. Meanwhile, in superconductors, there is a different mechanism to guide electrons. (Nano supercapacitors) can be defined as the number of free electrons that move freely in the material under the influence of an external electric field, as well as mobility, which is a measure of the ability and speed of free electrons to move, attributed. (shrink)

Note: NI_nanoparticle nickel nanoparticles is a strong conductor of electric current and its surface is shiny and polished. This element belongs to the group of iron and cobalt elementsUsing particles from the microscale to the nanoscale provides benefits for various scientific fields, but because a large percentage of their atoms is on the surface, nanomaterials can be highly reactive and pose risks. have a potential for humans. Nanoparticles are of great interest due to their wide application, both in industry and (...) in the natural sciences. While natural materials have constant physical properties regardless of size, the size of a nanoparticle determines its physical and chemical properties. Therefore, the properties of a material change as its size approaches the nanoscale and the percentage of atoms on the surface of the material becomes significant. The important feature of all nano structures is that in which the number of surface atoms is more than the number of volume atoms. This ratio increases with decreasing nanoparticle size. Therefore, the size of the nanoparticle is considered its most important feature. The range of activity of nanoparticles depends on the nature and shape of the nanostructure. However, if the energy of the nanoparticle field is comparable to the energy of electromagnetic radiation and if in a certain range a wavelength with the occurrence of chemical reactions in materials Under irradiation, significant changes will be made in the activity of nanoparticles up to 100 nm in size. is the nanometer expected to be used for storage. Given the relatively large (physically speaking) storage devices we have now and the fact that we need gigabyte sizes in various areas, there is a high potential for activity in this There is a context. Each quantum dot consists of a discrete ball of several hundred atoms that can have one of two magnetic states. This allows them to contain a single bit of information (zero or one), as is customary in machine computing. In conventional hard disks, the data bits must be spaced far enough apart that they do not overlap. Quantum dots act as completely independent units that are not structurally connected, so they can become somewhat closer to each other. One of the new information storage tools is the use of nickel quantum dots in nanometer sizes, which are expected to be used to store terabytes of data. (shrink)

Electrostatic nanocapacitors also benefit from a very short distance between their electrodes. Electrostatic nanocapacitors are unique in this respect. If the electrodes are far apart, like charges on their surface strongly repel each other. When the electrodes are placed closer together, the negative and positive charges on both sides balance these repulsive forces, and more total charge can be stored in a given area.

based on organic materials can be mechanically exible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make exibility impossible in them. Makes. Properties such as strength, exibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties of the (...) material by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

In addition to that, the presence of particles prevents the selective reaction of internal nanotubes, and this issue of purity confuses nanotubes based on their size, type, or use as macromolecular species. Absorption spectroscopy (NIR-Vis-UV) can be used to check the population of the sample or the degree of grouping of the sample. If how to distribute nanotubes by NIR-Vis-UV absorption spectroscopy is desired, the sample should be dispersed or in the form of a thin layer. Optical absorption measurements provide (...) useful information about the electronic properties of SWCNTs, and this information can be used to study covalent and non-covalent interactions between molecules and nanotubes. (shrink)

In a nMOS graphene field effect transistor, the resistance between two electrodes can be transferred or controlled by a third electrode. In a multilayer graphene field effect nMOS transistor, the current between the two electrodes is controlled by the electric field from the third electrode. Unlike the bipolar transistor, it is capacitively connected to the third electrode and is not in contact with the semiconductor. Three electrodes in the structure of the nMOS graphene field effect transistor (...) are connected to the source, drain and gate, and this action increases the switching speed (doping) in the nMOS graphene transistor circuit. (shrink)

Graphene nanomemories have been developed molecularly, providing excellent programmable nanoscale memory performance compared to previous graphene memory devices and a memory window. Large (12V), fast switching speed (1 microsecond), shows strong electrical reliability. Graphene molecular nanomemories show unique electronic properties, and their small dimensions, structural strength, and high performance make them a charge storage medium for Nano memory applications. We use a set of techniques involving a solution of nanoparticles, which creates a very thin layer on the target substrate (...) and is used as a sacrificial layer during the nanopatterning process. (shrink)

Devices based on organic materials can be mechanically flexible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make flexibility impossible in them. Makes. Properties such as strength, flexibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties of (...) the material by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

A short position paper on how we can preemptively anticipate and design nanotechnology-safe futures.

Note: Many types of nanosensors are designed using CP nanomaterials for nanobiological applications. (Conductive surface) The oxidation of conductive polymeric materials is easily altered by redox mechanisms, and the charge transfer properties of these materials are affected by structural parameters, such as diameter and dimensions. CP materials are able to provide sensitive and rapid responses to specific biological and chemical species. Techniques such as chemical polymerization are often used to make CP nanomaterials. Manufacturing strategies can be divided into three categories: (...) hard mold synthesis, soft mold synthesis, and mold-free synthesis. The most widely used conductive polymers in nanosensors are nanomaterials made from CP due to their unique chemical and electrical properties resulting from the properties of their pie-electron nanosystem. Many modeling and functionalization technologies are being developed to control the location, distribution, amount, or structure and orientation of biological nanomolecules at the nanomaterial level. Therefore, our level of contact between biological nanomolecules and nanomaterials is of particular importance in countless applications. Covalent and non-covalent modifications are two general methods for coupling biological molecules and CP nanomaterials. Covalent functionalization is a chemical process in which a strong bond or relationship between nanomaterials and biological molecules is formed. In many cases, surface chemical modifications are required to create active groups that can bind to biomolecules. Unlike covalent functionalization, in the non-covalent method, nanomolecules can be removed without destroying the geometric and electronic structure on the surface. Nanomaterials are formed. Conclusion : The large surface-to-volume ratio in nanostructures and the high potential for signal amplification provide ideal conditions for marking and detecting biological elements in the structure of nanosensors. (shrink)

The antenna is considered as the primary means of absorbing electromagnetic waves in space and has its own engineering knowledge, which is very developed and extensive. In general, in order to receive the electromagnetic wave in space, the dimensions of the antenna must be in the order of the size of the input wavelength to its surface. Due to the very low dimensions of nano-sensors, nano-antennas need a very high operating frequency to be usable. The use of graphene (...) greatly helps to solve this problem. Wave propagation velocities in CNTs and GNRs can be up to 100 times slower than vacuum velocities, depending on the physical structure, temperature and energy. Accordingly, the resonant frequency of graphene-based nano-antennas can be twice as low as (nano-carbon) nano-antennas. (shrink)

The development of machine learning and deep learning (DL) in the field of AI (artificial intelligence) is the direct result of the advancement of nano-electronics. Machine learning is a function that provides the system with the capacity to learn from data without being programmed explicitly. It is basically a mathematical and probabilistic model. DL is part of machine learning methods based on artificial neural networks, simply called neural networks (NNs), as they are inspired by the biological NNs that constitute (...) organic brains. Despite its similarity to biological organs such as human brains, major problems arise in trying to attribute moral responsibility to autonomic systems based on hardware including nano-electronic devices, which are sought to replace humans (moral agents) in the context of AI. It is suggested that the required emotional environment which enables actions according to reasons in humans is not witnessed at AI devices. Though AI technology raises an enticing resemblance to human actions, this resemblance is to be considered with a skeptical eye. It is because actions are associated with reasons while causes are connected to operations. Human agents are capable of acting upon their reasons, while AI devices are limited only to operations as they are conditioned by their programming, which is considered as an embodiment of some causes. As moral responsibility goes hand in hand with the capacity to act (according to reasons), attributing moral responsibility to AI devices is revealed to be but a misleading metaphor. (shrink)

Note: In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. -/- The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can (...) be 100 times lower than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

Safe-by-Design (SBD) frameworks for the development of emerging technologies have become an ever more popular means by which scholars argue that transformative emerging technologies can safely incorporate human values. One such popular SBD methodology is called Value Sensitive Design (VSD). A central tenet of this design methodology is to investigate stakeholder values and design those values into technologies during early stage research and development (R&D). To accomplish this, the VSD framework mandates that designers consult the philosophical and ethical literature to (...) best determine how to weigh moral trade-offs. However, the VSD framework also concedes the universalism of moral values, particularly the values of freedom, autonomy, equality trust and privacy justice. This paper argues that the VSD methodology, particularly applied to nano-bio-info-cogno (NBIC) technologies, has an insufficient grounding for the determination of moral values. As such, an exploration of the value-investigations of VSD are deconstructed to illustrate both its strengths and weaknesses. This paper also provides possible modalities for the strengthening of the VSD methodology, particularly through the application of moral imagination and how moral imagination exceed the boundaries of moral intuitions in the development of novel technologies. (shrink)

El presente articuLo pretende encuadrar y definir las implicaciones éticas reLativas a La aplicación biomédica de las nanotecnologías, a través de La vaLoración deL estado del arte.Las nanotecnologías, expresiÓn de La habilidad humana de manipuLar la materia a escala atómico/molecular se presentan como un instrumento capaz de modificar la investigaciÓn científica y la medicina de manera radicaL.Debates a todo nivel han subrayado las dificultades de darles una definición clara y unívoca, a causa de la convergencia de diversos ámbitos del saber (...) comprendidos en ellas.No obstante que Las nanotecnoLogías estén ya presentes en las ciencias computacionaLes y en La eLectrÓnica, es en eL ámbito médico-sanitario que se proyectan Las aplicaciones más entusiastas: instrumentos de diagnóstico y suministración de fármacos menos invasivos y más eficaces. Estas tecnoLogías se presentan al mismo tiempo como terapias pero también como instrumentos de prevención únicos, Las mismas características que hacen peculiar eL empLeo de las nano tecnologías en medicina, sugieren también precauciones: por una parte la dimensión mínima de las nanopartículasfacilita su ingreso en el organismo humano, traspasando las defensas naturales del organismo, agilizando una distribuciÓn de los fármacos altamente precisa. Por otra parte, estas mismas características pueden revelarse dañinas para el organismo humano .Dado que se trata de tecnología en rápida progresiÓn cuyos adelantos no son fáciles de predecir. los riesgos, aunque sÓlo aquellos potenciales, deben ser cuidadosamente valorados ya sea para las aplicaciones presentes como para aquellas futuras.Por tanto, encuadrar las implicaciones bioéticas de las nanotecnologías significa comprender y valorar su impacto sobre la salud humana. (shrink)

The essential biological processes that sustain life are catalyzed by protein nano-engines, which maintain living systems in far-from-equilibrium ordered states. To investigate energetic processes in proteins, we have analyzed the system of generalized Davydov equations that govern the quantum dynamics of multiple amide I exciton quanta propagating along the hydrogen-bonded peptide groups in α-helices. Computational simulations have confirmed the generation of moving Davydov solitons by applied pulses of amide I energy for protein α-helices of varying length. The stability and (...) mobility of these solitons depended on the uniformity of dipole-dipole coupling between amide I oscillators, and the isotropy of the exciton-phonon interaction. Davydov solitons were also able to quantum tunnel through massive barriers, or to quantum interfere at collision sites. The results presented here support a nontrivial role of quantum effects in biological systems that lies beyond the mechanistic support of covalent bonds as binding agents of macromolecular structures. Quantum tunneling and interference of Davydov solitons provide catalytically active macromolecular protein complexes with a physical mechanism allowing highly efficient transport, delivery, and utilization of free energy, besides the evolutionary mandate of biological order that supports the existence of such genuine quantum phenomena, and may indeed demarcate the quantum boundaries of life. (shrink)

In the present paper, on the basis of the theory of production principles and production revolutions, we reveal the interrelation between K-waves and major technological breakthroughs in history and make some predictions about features of the sixth Kondratieff wave in the light of the Cybernetic Revolution which, we think, started in the 1950s. We assume that the sixth K-wave in the 2030s and 2040s will merge with the final phase of the Cybernetic Revolution (which we call the phase of self-regulating (...) systems). This period will be characterized by breakthroughs in medical technologies which will manage to combine many other technologies into a single complex of MBNRIC-technologies (med-bio-nano-robo-info-cognitive technologies). The article offers some predictions concerning the development of these technologies. (shrink)

In the present paper, on the basis of the theory of production principles and production revolutions, we reveal the interrelation between K-waves and major technological breakthroughs in history and make forecasts about features of the sixth Kondratieff wave in the light of the Cybernetic Revolution that, from our point of view, started in the 1950s. We assume that the sixth K-wave in the 2030s and 2040s will merge with the final phase of the Cybernetic Revolution (which we call a phase (...) of self-regulating systems). This period will be characterized by the breakthrough in medical technologies which will be capable to combine many other technologies into a single complex of MANBRIC-technologies (med-bio-nano-robo-info-cognitive technologies). The article offers some forecasts concerning the development of these technologies. (shrink)

In the present article we analyze the relationships between K-waves and major technological breakthroughs in history and offer forecasts about features of the sixth Kondratieff wave. We use for our analysis the basic ideas of long cycles' theory and related theories (theories of the leading sector, technological styles etc.) as well as the ideas of our own theory of production principles and production revolutions. The latest of production revolution is the Cybernetic Revolution that, from our point of view, started in (...) the 1950s. We assume that in the 2030s and 2040s the sixth K-wave will merge with the final phase of the Cybernetic Revolution (which we call a phase of self-regulating systems). This period will be characterized by the breakthrough inmedical technologies which will be capable to combine many other technologies into a single system of MANBRIC-technologies (medico-additive-nano-bio-roboto-info-cognitive technologies). The article also presents a forecast of the process of global ageing and argueswhy the technological breakthrough will occur in health care sector and connected spheres. (shrink)

Safe-by-Design (SBD) frameworks for the development of emerging technologies have become an ever more popular means by which scholars argue that transformative emerging technologies can safely incorporate human values. One such popular SBD methodology is called Value Sensitive Design (VSD). A central tenet of this design methodology is to investigate stakeholder values and design those values into technologies during early stage research and development (R&D). To accomplish this, the VSD framework mandates that designers consult the philosophical and ethical literature to (...) best determine how to weigh moral trade-offs. However, the VSD framework also concedes the universalism of moral values, particularly the values of freedom, autonomy, equality trust and privacy justice. This paper argues that the VSD methodology, particularly applied to nano-bio-info-cogno (NBIC) technologies, has an insufficient grounding for the determination of moral values. As such, an exploration of the value-investigations of VSD are deconstructed to illustrate both its strengths and weaknesses. This paper also provides possible modalities for the strengthening of the VSD methodology, particularly through the application of moral imagination and how moral imagination exceed the boundaries of moral intuitions in the development of novel technologies. (shrink)

The monograph presents the ideas about the main changes that occurred in the development of technologies from the emergence of Homo sapiens till present time and outlines the prospects of their development in the next 30–60 years and in some respect until the end of the twenty-first century. What determines the transition of a society from one level of development to another? One of the most fundamental causes is the global technological transformations. Among all major technological breakthroughs in history the (...) most important are three production revolutions: 1) the Agrarian Revolution; 2) the Industrial Revolution; and 3) the Cybernetic one. The book introduces the theory of production revolutions which is a new valuable explanatory paradigm that analyzes causes and trends of dramatic shifts in historical process. The authors describe the course of technological transformations in history and demonstrate a possible application of the theory to explain the present and forthcoming technological changes. They analyze the technological shifts which took place in the second half of the twentieth and early twenty-first centuries and forecast the main shifts in the next half a century. On this basis the authors present a detailed analysis of the latest production revolution which is denoted as ‘Сybernetic’. They make some predictions about its development in the nearest five decades and up to the end of the twenty-first century and show that the development of various self-regulating systems will be the main trend of this revolution. The authors argue that the transition to the starting final phase of the Cybernetic Revolution (in the 2030–2040s) will first occur in the field of medicine (in some its innovative branches). In future we will deal with the started convergence of innovative technologies which will form the system of MANBRIC-technologies (i.e. the technological paradigm based on medicine, additive, nano- and bio- technologies, robotics, IT and cognitive technologies). The monograph gives an outline of the future breakthroughs in medicine and some other technologies (between the 2010s and 2070s). (shrink)

Abstract: This research aims at the design and implementation of an automatic high-performance voltage stabilizer which helps to detect inappropriate voltage levels and correct them to produce a reasonably stable output. The system consists of five dependent architectural designs which involve the power supply, delay switching circuit, monitoring circuit and load changeover circuit using 555 ic which produces the required signal when switched on by a relay to activate the alarm. The system uses a relay to charge the batteries and (...) automatically switches on this supply to supply the loads. It is composed of switching transistors and relay to control the power provided to ac loads, and it has LEDs for indicating the state of the system, 240-220vac/120-110vac switch, voltmeter displaying load voltage, heatsink, and fans for cooling the system. The system protects electrical equipment and machine against voltage surge. (shrink)

The thesis that technology is applied science is called by Niiniluoto (1997) the standard view. That is surprising because the identification between technology and applied science has been widely rejected by both historians and philosophers of technology, including Rapp (1974), Bugliarello and Doner (1976), Derry and Williams (1977), Feibleman (1983), Skolimowski (1966), Vermaas et al., (2011), Don Idhe (2013). The reasons of such rejection mainly stem from the fact that technology has historically progressed without the benefit of science, i.e., it (...) has been possible to design technological devices without the explicit and systematic development of the scientific theories and laws that would explain their functioning. Polish philosopher Henryk Skolimowski has attacked this identification based on historical evidence. He argues that in the development of technology, there are many cases wherein technological designs have supported pure scientific research, rather than the other way round if technology were applied science. According to Skolimowski, some cases that dispute the identification of technology as applied science are the design of the transistor, supersonic aircraft, and the Manhattan Project. However, this historical evidence should not persuade us for two reasons: 1) Rejecting the previous scientific research that served as the basis for the said technological designs commits Skolimowski to anachronism. 2) From a realistic perspective of science, technological devices are not only subject to the principles and laws of science, regardless of the extent of our knowledge of them, but incorporate insights on more articulated explanations that while not available at the time of designing, do inspire our practical and theoretical efforts and guide further work. In this paper, we posit that the cases offered by Skolimowski to motivate his rejection of the standard view are far from being conclusive. To this end, we not only critically assess each case but also identify other historical examples that might be even more promising to support Skolimowski's thesis. Finally, we critically deal with those more promising cases and argue for a deflationary interpretation of the standard view. -/- . (shrink)

This chapter examines how advances in nanotechnology might impact criminal sentencing. While many scholars have considered the ethical implications of emerging technologies, such as nanotechnology, few have considered their potential impact on crucial institutions such as our criminal justice system. Specifically, I will discuss the implications of two types of technological advances for criminal sentencing: advanced tracking devices enabled by nanotechnology, and nano-neuroscience, including neural implants. The key justifications for criminal punishment- including incapacitation, deterrence, rehabilitation, and retribution – apply (...) very differently to criminal sentences using these emerging technologies than they do to imprisonment. Further, use of these technologies would represent a shift away from retribution as the primary justification for criminal punishment. In addition, the possibility of nano-neural implants entails a new model of rehabilitation: namely, involuntary rehabilitation aimed at changing an offender’s character, rather than his environment. (shrink)

Wormhole is a popular tool for interstellar travel in science fiction. It connects two different space-time points directly although such an astrophysical object is not yet observed, but in 2015, researchers in Spain created a tiny magnetic wormhole for the first time ever. They used it to connect two regions of space so that a magnetic field could travel 'invisibly' between them. This article presents a model of making a wormhole of light on the principle of conversion of energy so (...) that light going from one end could come out of another end; hence it can be called a wormhole of light. Materials including solar cell, amplified speaker, one way walkie talkie, alligator clips, light emitting diode, transistors and clapping switch have been used. The method of conversion of energy is used and light is transferred into sound first and then back into light. The preparation of such wormhole of light is split into two parts. One end includes a circuit that would accept light through a box and the other end would provide light coming from another box. In order to utilize a wormhole of light to two locales of room the goal was to make light travel between them. Sound made from light would travel the distance between the two boxes. For this purpose a one way walkie-talkie will provide the connection between the two boxes and thus as a whole it would work as a wormhole of light. (shrink)

This study has proven that the economic system is determined by various components, in particular, it includes the real sector of the economy, which is formed on mega-, macro, meso-, micro-and nano-levels. In addition, it was proved that the nano-level is determined by the activities of individuals whose economic activity begins with the birth and attitude of parents, attending various educational and upbringing institutions, and studying at university. A separate segment of the nano-level of the economic system (...) is the baby industry responsible for the production of goods and services for children and future parents. All these aspects are indicators of the development of the baby economy. Such an economic category as the baby economy was separated and defined. The study uses the following methods: analysis, synthesis, structural analysis, systemic approach, observation, comparison, multifactor regression. These methods made it possible to achieve the results, which involve isolation of the baby economy as a component of nanoeconomy and definition of such components of the baby economic segment of nanoeconomy as a family or household economy, the baby industry, the economy of the educational process and upbringing. For this purpose, the value-institutional approach was applied. In addition, multifactorial analysis of the impact of indicators of the baby economy development on the population of a country with a transitive economy with incomes below the subsistence minimum was performed. This analysis identified a direct but minor relationship between these phenomena, which demonstrates the need to intensify and create a policy for the baby economy in similar states. The theoretical significance of the obtained results is determined by the introduction of a new economic category of "the baby economy" for the formation of a nano economic component within socio-economic systems. (shrink)

In this chapter, we analyze the relationship between Kondratieff waves and major technological revolutions on the basis of the theory of production principles and production revolutions, and offer some forecasts about the features of the Sixth Kondratieff Wave/the Fourth Industrial Revolution. We show that the technological breakthrough of the Sixth Kondratieff Wave may be interpreted as both the Fourth Industrial Revolution and as the final phase of the Cybernetic Revolution. We assume that the sixth K-wave in the 2030s and 2040s (...) will merge with the final phase of the Cybernetic Revolution (which we call a phase of selfregulating systems). This period will be characterized by the breakthrough in medical technologies which will be capable of combining a number of other technologies into a single system of new and innovative technologies (we denote this system as a system of MANBRIC-technologies—i.e. medical, additive, nano-, bio-, robo-, info-, and cogno-technologies). (shrink)

David Bohm, in his "causal theory", made the correct Hegelian synthesis of Einstein's thesis that there is a "there" there, and Bohr's antithesis of "thinglessness" (Nick Herbert’s term). Einstein was a materialist and Bohr was an idealist. Bohm showed that quantum reality has both. This is “physical dualism” (my term). Physical dualism may be a low energy approximation to a deeper monism of cosmic consciousness called "the super-implicate order" (Bohm and Hiley’s term), “pregeometry” (Wheeler’s term), “substratum” (Dirac’s term), “funda-MENTAL space” (...) (Hameroff’s term), “Chi” (Chinese medicine & Falun Gong) etc., but for our immediate pragmatic purpose of constructing naturally conscious nano-computers and of virtually reverse engineering alleged reports of propellantless UFO propulsion (French Intelligence Report, 1999 [email protected] Vol. 5, No. 11, Part 1 -- August 1, 1999 & NIDS report "Best UFO Cases - Europe", I. Von Ludwiger) to the stars and beyond, physical dualism will work. (shrink)

Since 2004, it has been mandated by law that all Danish undergraduate university programmes have to include a compulsory course on the philosophy of science for that particular program. At the Faculty of Science and Technology, Aarhus University, the responsibility for designing and running such courses were given to the Centre for Science Studies, where a series of courses were developed aiming at the various bachelor educations of the Faculty. Since 2005, the Centre has been running a dozen different courses (...) ranging from mathematics, computer science, physics, chemistry over medical chemistry, biology, molecular biology to sports science, geology, molecular medicine, nano science, and engineering. -/- We have adopted a teaching philosophy of using historical and contemporary case studies to anchor broader philosophical discussions in the particular subject discipline under consideration. Thus, the courses are tailored to the interests of the students of the particular programme whilst aiming for broader and important philosophical themes as well as addressing the specific mandated requirements to integrate philosophy, some introductory ethics, and some institutional history. These are multiple and diverse purposes which cannot be met except by compromise. -/- In this short presentation, we discuss our ambitions for using case studies to discuss philosophical issues and the relation between the specific philosophical discussions in the disciplines and the broader themes of philosophy of science. We give examples of the cases chosen to discuss various issues of scientific knowledge, the role of experiments, the relations between mathematics and science, and the issues of responsibility and trust in scientific results. Finally, we address the issue of how and why science students can be interested in and benefit from mandatory courses in the philosophy of their subject. (shrink)

Nanotechnology, as with many technologies before it, places a strain on existing legislation and poses a challenge to all administrative agencies tasked with regulating technology-based products. It is easy to see how statutory schemes become outdated, as our ability to understand and affect the world progresses. In this article, we address the regulatory problems that nanotechnology posses for the Food and Drug Administration’s (FDA) classification structure for ‘‘drugs’’ and ‘‘devices.’’ The last major modification to these terms was in 1976, with (...) the enactment of the Medical Device Amendments. There are serious practical differences for a classification as a drug or device in terms of time to market and research. Drugs are classified, primarily, as acting by ‘‘chemical action.’’ We lay out some legal, philosophic, and scientific tools that serve to provide a useful, as well as legally and scientifically faithful, distinction between drugs and devices for the purpose of regulatory classification. These issues we raise are worth the consideration of anyone who is interested in the regulation of nano-products or other novel technologies. (shrink)

Various understandings and definitions of time will be reviewed. The nature and structure of time will be reviewed and the concepts of time and passage of time will be refreshed. The fundamental role played by energy and four natural forces in the actions, reactions and interactions concerning matter, anti-matter, energy in space and time will be critically analyzed. The reality how time is constructed during the construction of materials will be presented and discussed. The classical and quantum ideas in this (...) regard will be comprehensively studied. How these ideas will give us a fresh insight about the nature, structure and role of time in the construction of materials through natural scientific and manmade processes will be highlighted. The relations among matter, anti-matter, energy and time will be freshly stated. The milli-, micro-, nano, pico-, femto-, atto-times will be qualitatively analyzed considering physical, inorganic, organic and bio-materials and their construction and structure. The physics of timelessness also will be put forward. -/- . (shrink)

Abstract: Samples of LaxSr1-xMnO3 (x = 0.5, 0.55, 0.6, 0.66, and 0.7) were prepared by the citrate-nitrate autocombustion method. The prepared nano-particles were investigated and characterized using X-Ray diffraction (XRD) and Transmission Electron Microscopy (TEM) to confirm the formation of the samples in single phase without any impurities and to calculate the particle size. The magnetic susceptibility χM was measured as a function of temperature and magnetic field intensity. From χM(T) and M(H) the saturation magnetization (Ms), remanent magnetization (Mr) (...) and coercivity (Hc) of the samples were estimated. The correlation among physical properties and the ratio of divalent cation substitution was discussed and reported to shed more light on technological applications of the investigated samples. (shrink)

In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can be 100 (...) times lower than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

In this article, a classification of the global catastrophic risks connected with the possible existence (or non-existence) of extraterrestrial intelligence is presented. If there are no extra-terrestrial intelligences (ETIs) in our light cone, it either means that the Great Filter is behind us, and thus some kind of periodic sterilizing natural catastrophe, like a gamma-ray burst, should be given a higher probability estimate, or that the Great Filter is ahead of us, and thus a future global catastrophe is high probability. (...) If ETIs exist in our light cone, it is most likely they exist in the form of ET artificial general intelligence (ETAI). ETAI may be traveling at near-light speed as an explosive wave of intelligence in the form of some nano-mechanisms which could reach us at any moment; may send us potentially dangerous messages with AI-virus payloads; or be near or on Earth in some dormant form. This dormant form could be nanobots, which could act as berserkers, and be triggered when humans unwittingly cross some threshold. If ETIs are nearby and less advanced, they could find our messaging extra-terrestrial intelligence (METI) messages and send their “fleet” to or direct weapons toward Earth. Even extinct ETIs could have left dangerous remnants in the form of AI systems that our civilization may encounter. If our existence is a simulation, this could be run by ETIs. Even a false belief in the existence of ETIs could potentially fuel millennial sects. If humanity is the first intelligence to emerge, it may kill or prevent the existence of all future potential ETI, a different type of catastrophe. Several options to prevent catastrophic risks are connected with ETI: sending requests for help, using random strategies to escape the Fermi paradox, Great Filter prediction, or the hope that ETIs will find the remains of our extinct civilization and resurrect it. (shrink)

Nanowires ( SiNWs) have high mobility and surface-to-volume ratio, which makes them easy to control using a weak electric field. These one-dimensional nanostructures are created from nanowires with a diameter in the range of nanometers and a length of more than a micrometer. It has been done in the manufacture of nanowires through regular one-dimensional arrays with the help of different physical and chemical methods. Methods such as the use of electron beam or lithography method, heavy ion irradiation, laser, chemical (...) and electrochemical methods such as water heat and spontaneous assembly methods used to make the membranes of molds can also be used . In making one-dimensional nanostructures such as Oligophenylene vanillin nanowires The electro-accumulation method consists of three general steps: firstly, the creation of a porous template as a suitable substrate and framework for the accumulation of nanowires, secondly, the growth of nanowires along the cavities of the template, and thirdly, removing the template and separating the nanowires from it. The nanowires are directly dependent on the characteristics of the mold surface such as the size distribution of the holes, the density of the holes and the superiority of the surface of the nano-holes. In order to control the properties of Oligophenylene vanillin nanowires, parameters that are effective in the formation and optimization of the diameter of the holes and the thickness of the mold should be considered. (shrink)

Defining Ecosophy (ecological wisdom) like a contemporary philosophy of survival, security and a sustainable Human Development, terrestrial nature and society, the author of this article approaches the correlation between it and the digital version of security in the context of new technologies. Human survival is in connection with the protection, optimal functioning of the natural environment and the development of human society. Human evolution, physical and psychological (the issues of Anthropoecology, a medical-biological science, deals with them), depends on the natural (...) and social environment, on the development of new techniques and technologies. New technologies (nano-, bio-, info-, socio-technologies) can ensure the security and the increasing development of the human being, but they can threaten it too. The author does not deny behaviours, the possibility that human intellect could be non-biological. Moreover, the author believes if it comes to it, that we will not be able to speak about the human species. New technologies like the traditional and less new, are intended to help in solving various problems related to health, society interactions with nature, human society and diverse cultures, societies and states. The philosophy of security and the digital one, like the components of Ecosophy, along with philosophical aspects of Anthropoecology, General Ecology and Social Ecology, needs like any other science or philosophy to elaborate systems of concepts, principles and laws. (shrink)

The concepts developed using Upanishadic insight regarding human consciousness, mind and mental processes and their applications in information acquisition and transmission by, through and in human body will be used to model human cognitive processes. A sequential reversible process by the stepwise transformation of (i) infrasonic form of energy and transformation of information already stored in (ii) biochemical form within as memory, and retrieved as inner mental world into (iii) electrochemical and then into (iv) mechanical form while communicating and the (...) reverse of it as the (i) input stimuli from outside world as light, sound, chemical, mechanical and heat forms, into (ii) electrochemical, (iii) biochemical and finally into (iv) infra sonic form while acquiring and understanding processes is put forward and discussed. Comparisons will be made between energy transformations in electronics communication processes and these psychic energy transformations that give rise to cognitive processes. This comparison gives an insight and theory of origin, structure, function and cessation of human mental functions. A comparative diagram that describes application of infrasonic energy transformations associated with bionics as biochemical, electrochemical and mechanical forms will be given. (shrink)