Buildings are the largest energy consumer worldwide, according to the United Nations Environment Programme (UNEP). Most of the building’s energy consumption is in the building’s life cycle stage. Therefore, achieving sustainable development at the national level requires minimizing the building’s effects on the environment via reducing energy consumption by buildings. The building’s energy performance will be predicted and evaluated by the energy simulation. Using BIM in EPAs significantly reduces time and costs. (...) This study aimed to optimize energy consumption in buildings using Building Information Modeling (BIM) Technology, which can assess energy performance in the building. In this research, the general form of the building was modeled on the Autodesk Revit Software. The main shape of the building was chosen for modeling after reviewing the proposed designs. Then, the building energy consumption was calculated using the relevant tools in this scope, according to the materials, equipment, and project location. Finally, the best possible mode was selected by examining different modes of energy consumption. The results showed that 61.48% difference between the best mode of energy consumption optimization and the current mode of the building and 79.35% compared to the initial mode. Finally, parametric studies of alternative cost optimization schemes showed that saving 58.23% of the building’s current status for a 30-year horizon. (shrink)

Buildings energy consumption is growing gradually and put away around 40% of total energy use. Predicting heating and cooling loads of a building in the initial phase of the design to find out optimal solutions amongst different designs is very important, as ell as in the operating phase after the building has been finished for efficient energy. In this study, an artificial neural network model was designed and developed for predicting heating and cooling loads of (...) a building based on a dataset for building energy performance. The main factors for input variables are: relative compactness, roof area, overall height, surface area, glazing are a, wall area, glazing area distribution of a building, orientation, and the output variables: heating and cooling loads of the building. The dataset used for training are the data published in the literature for various 768 residential buildings. The model was trained and validated, most important factors affecting heating load and cooling load are identified, and the accuracy for the validation was 99.60%. (shrink)

Traditionally, building energy model is created in isolation from the architectural building information model and energy analyses have relied on a single analysis tool. The building energy model can be generated more quickly by leveraging existing data from the BIM. The impacts of energy consumption are significant in the building usage phase, which can last several decades. Due to the large share of the final energy consumption in the building sector, (...) accurate analysis of thermal and cooling loads of a building and the efforts to reduce energy losses represent an effective way to reduce energy consumption. Therefore, it is essential to analyze the building energy performance in the design phase, which is when critical decisions are made. This study aims to investigate the impact of the building components and construction materials on building energy efficiency using Building Information Modeling (BIM) technology in a mild climate zone. After reviewing the proposed designs, the main building form was chosen for energy modeling and analysis. Then, building energy consumption analysis was performed based on the basic parameters of the building energy model. Eventually, the most optimal mode was selected by examining different energy consumption forms. This study showed that the building HVAC system always had the largest share of energy consumption. Finally, the results of parametric studies on alternative schemes of energy use intensity optimization showed that 22.59 % savings could be achieved as compared to the base building model in a 30-year time horizon. (shrink)

Building information modeling can help in predicting the energy efficiency in future based on dynamic patterns obtained by visualization of data. The aim of this study was to investigate the effective parameters of energy consumption using BIM technology which can evaluate the buildings energy performance. First, three forms of general states in the building were modeled to evaluate the proposed designs in Autodesk Revit Software. Then, the main building form for energy modeling (...) and analysis was selected. Autodesk Revit 2020 software was also used to obtain the results of climate data analysis and building energy consumption index. Finally, the most optimal mode was selected by examining different energy consumption modes. The results showed that the use of building information modeling technology in adjusting the parameters affecting energy consumption can save energy cost up to 58.23% in block D. Energy cost savings for block C and the western lobby were obtained as 51.03% and 43.05%, respectively. Based on energy use intensity, energy cost savings for blocks C, D, and the western lobby were estimated as 16.67%, 16.30%, and 11%, respectively. The results of parametric studies on alternative schemes of energy use intensity optimization showed that 16.30% savings could be achieved by the base building model in a 30-year time horizon. Therefore, it was concluded that optimization of energy consumption would reduce the environmental pollutants emission and contribute to preservation and sustainability of the environment. (shrink)

One of the main reasons of environmental pollution is energy consumption in buildings. Today, the use of renewable energy sources is increasing dramatically. Among these sources, solar energy has favorable costs for various applications. This study examined a commercial building in a hot and humid climate. The findings showed that choosing the optimal angle of solar panels with the goal of optimized energy consumption would yield reduced costs and less environmental pollutants with the least cost (...) and maximum energy absorption. In this study, to calculate the energy requirements of the building, DesignBuilder software was used. To study the solar angles and estimate the energy produced by the solar panels, Polysun software was used after simulating the building energy. Energy simulation results showed that the whole building energy consumption was 26604 kWh/year. Finally, the evaluation results of solar panels showed that the energy produced by photovoltaic modules at an optimal angle of 31° would be equal to 26978 kWh/year, which is more than the energy required by the building. This system can prevent 14471 kg of carbon dioxide emissions annually. Sustainable energy criteria showed that for the studied building, photovoltaic modules could be used in energy production to reach a zero-energy system connected to the grid with an annual energy balance. (shrink)

Buildings are the largest energy consumer in the world, according to the United Nations Environment Program. Most of the energy will be used during the building life-cycle stage. Thus, achieving sustainable development at the national level requires minimizing the impact of buildings on the environment by reducing energy consumption. Using Building Information Modeling technology in energy performance assessment could be significantly reduced time and cost. This study aimed to optimize energy consumption in a (...) residential building using BIM technology. The main focus of this study was to evaluate energy performance through the simultaneous evaluation of building components using BIM technology with a conceptual design approach, comparison, and reduction of energy consumption. To investigate different design ideas were created several conceptual masses in Autodesk Revit software with a top-down design approach. After reviewing the conceptual masses, the main building form was chosen for modeling. Then, building energy consumption was computed using related tools in this field, based on the type of materials, equipment, and project location. Finally, the most optimal mode was selected by examining different energy consumption forms. The results of parametric studies on alternative schemes of energy optimization showed that 58.46% of energy cost savings could be achieved compared to the initial model of the building on a 30-year time horizon. (shrink)

In recent times, limitations and adverse effects of fossil fuels have significantly attracted researchers' attention to green fuels worldwide, especially in developed nations. As a way of assessing this actualization of biorefineries establishment in developing nations, this report surveys the works done by various researches towards this great course in terms of promoting and gaining the attention of both government and private investors about the technical and economic feasibility of embracing the use of biofuels, a case of bioethanol in Nigeria. (...) Different classes of feedstocks were reviewed for the laboratory-scale, process scale-up, pilot plant, and techno-economic studies regarding ascertaining the technical and economic feasibility of local setup of a functional biorefinery in Nigeria, which would be beneficial environmentally and economically. The literature survey unveiled that the Bioethanol yield obtained from sugarcane-juice (72.7 %), banana-stems (84.0 %), and cassava (92.0 %) were found to be of highest potential amongst other sugar-based, lignocellulosic, and starch- based feedstock, respectively. The survey further unveils that the volume of process scale-up and economic feasibility studies does not correlate well with the laboratory-scale studies. The bulk of the research works on bioethanol has given preferential attention to laboratory studies. Only a few studies have looked into the commercialization (i.e., scale-up) of the laboratory findings and the economic implications. Presently, only sugarcane and a few cassavas are reported in the literature so far. It is, therefore, necessary for further studies to give attention to the investigation of the commercializing locally developed technologies and the exploration of their economic benefits. (shrink)

Socialist buildings in the city of Kruja (Albania) date back after the Second World War between the years 1945-1990. These buildings were built during the time of the socialist Albanian dictatorship and the totalitarian communist regime. A questionnaire with 30 questions was conducted and 14 people were interviewed. The interviewed residents belong to a certain area of the city of Kruja. Based on the results obtained, diagrams have been conceived and mathematical regression models have been developed which will serve as (...) a base for drawing conclusions. The purpose of this study is to find a relationship that specifies the role of the inhabitants, the role of the dwellings, the physical-mechanical characteristics, and their energy efficiency, in order to improve the living conditions of the inhabitants. The independent variables interact with each other assuming positive or negative values depending on the probabilistic mathematical regression, giving different results based on the calculated data. The variables that co-exist among them are living space, quality of life, time spent at home, social interaction of residents, dwelling humidity level, dwelling orientation, satisfaction level of the inhabitants, dwelling improvements demand, and monthly electricity bills. (shrink)

The paper presents an analysis of the current state of administrative modular buildings and co-working spaces in some European countries and Latin America. The study provides an overview of the concept of modular buildings and co-working spaces, including their history and evolution and their energy efficiency. They also examine the benefits and drawbacks of these types of buildings, as well as the factors that contribute to their success. The authors analyze several case studies of administrative modular buildings and (...) co-working spaces in different European countries and Latin America, such as the UK, Germany, Slovakia, and Ukraine ending with Brazil. The paper takes into consideration the design and construction of these buildings, as well as the services and amenities they offer. The paper also considers the impact of administrative modular buildings and co-working spaces on the environment, as well as their potential for promoting sustainable development. The authors discuss the challenges and opportunities associated with the development of administrative modular buildings and co-working spaces and provide recommendations for future research in this area. Energy-efficient modular buildings and co-working spaces have the potential to support organizations in achieving their sustainability goals while also providing a range of benefits for employees and stakeholders. (shrink)

The city of Kruja (Albania)contains three types of dwellings that date back to different periods of time: the historic ones, the socialist ones, the modern ones. This paper has to deal only with the historic building's typology. The questionnaire that is applied will be considered for the development of mathematical regression based on specific data for this category. Variation between the relevant variables of the questionnaire is fairly or inverse-linked with a certain percentage of influence. The aim of this (...) study is to have better insights into the important role of building occupancy, people's lifestyle, economic level, and the quality of life of the residents in the inner medieval citadel, the physics characteristics, and the energy efficiency of the historical dwellings. The variables such as the number of residents, quality of life, the surface of the dwellings, heating instruments and time spent in the dwelling, current living conditions, monthly bills, level of satisfaction, restoration, and building improvements, interact with each other with probabilities with different positive or negative percentages. (shrink)

The city of Kruja dates back to its existence in the 5th and 6th centuries. In the inner city are preserved great historical, cultural, and architectural values that are inherited from generation to generation. In the city interact and coexist three different typologies of dwellings: historic buildings that belong to the XIII, XIV, XV, XIII, XIX centuries (built using the foundations of previous buildings); socialist buildings dating back to the Second World War until 1990; and modern buildings which were built (...) from 1990 onwards. According to the questionnaires, the creation of mathematical models applied to each category will result in contradictory attitudes but also fairy ones based on different percentages. There are underlined 5 quality of life indicators(questions) from a total of 30 questions of the questionnaire, which are involved in mathematical regression and are statistically significant with a significance level p<5% (with a reliability of 95%), which interact for all three categories of buildings. The quality of life indicators: dwelling area, heating mode during winter, level of dwelling improvement, time spent in the dwelling, and monthly electricity payments, are the main actors who will be compared in order to draw conclusions. According to the statistical calculations trend, it is noted that the socialist buildings category does not directly participate in the debate between historic and modern buildings by means of the quality of life indicators (questions). (shrink)

Structuralism can be defined as an important concept of using “units” as elements of form and space-giving, where the whole form is made not only up of a “texture”, a certain flexible grid, or an algorithm of shape-giving, but it depends also on the relationships created and how people use it. The hypothesis of this study is that “Modular Construction” can also have an aesthetically pleasing outlook and that modular housing can definitely have increasing importance in the future. Modular housing (...) due to its cheap, and manufactural way of construction can be replicable in various locations. Structuralism and Modular Construction have been at the core of the Modernist movement. Although postmodernism marked the decline of modular construction adopting methods known for a more close sense of place, vernacular, and locality, which differs from the ubiquitous model of modernism, it is the universality of space and habitation seen since the times of Hippodamus Grid, Japanese Tattami systems, and rational universal space in housing known in Europe that make grid and modular design an excellent system in obtaining, rationality, functionality, flexibility, and energy efficiency, including quick construction and possibility for replication. In this regard, modular construction has a future, especially in times of crisis and economic instability. (shrink)

On edge computing, mobile devices can offload some computing intensive tasks to the cloud so that the time delay and battery losses can be reduced. Different from cloud computing, an edge computing model is under the constraint of radio transmitting bandwidth, power and etc. With regard to most models in presence, each user is assigned to a single mission, transmitting power or local CPU frequency on mobile terminals is deemed to be a constant. Furthermore, energy consumption has a positive (...) correlation with the above two parameters. In a context of multitask, such values could be increased or reduced according to workload to save energy. Additionally, the existing offloading methods are inappropriate if all the compute densities of multiple tasks are high. In this paper, a single-user multi-task with high computing density model is proposed and partial task is offloaded when use the different offload algorithm. Simulated annealing algorithm is the best method to select offloading tasks, which can enhance the offloading ratio and save energy consumption. (shrink)

The monograph summarizes energy and environmental aspects of biofuel production from waste in the context of rural development; institutional aspects of the formation of a “green economy” in the agricultural sector are considered; attention is paid to energy auditing as a form of implementing the state policy on energy saving and energy efficiency. The monograph includes the results obtained in the implementation of the state scientific work “Development of the concept of ensuring energy security (...) and energy efficiency as priority areas for sustainable development of rural areas” (0121U109443), 2021-2022. For researchers, agriculture specialists, ecologists, economists, entrepreneurs, teachers, students, graduate students. (shrink)

Some multi-path routing algorithm in MANET, simultaneously send information to the destination through several directions to reduce end-to-end delay. In all these algorithms, the sent traffic through a path affects the adjacent path and unintentionally increases the delay due to the use of adjacent paths. Because, there are repetitive competitions among neighboring nodes, in order to obtain the joint channel in adjacent paths. The represented algorithm in this study tries to discover the distinct paths between source and destination nodes with (...) using Omni directional antennas, to send information through these simultaneously. For this purpose, the number of active neighbors is counted in each direction with using a strategy. These criterions are effectively used to select routes. Proposed algorithm is based on AODV routing algorithm, and in the end it is compared with AOMDV, AODVM, and IZM-DSR algorithms which are multi-path routing algorithms based on AODV and DSR. Simulation results show that using the proposed algorithm creates a significant improvement in energy efficiency and reducing end-to-end delay. (shrink)

Purpose The purpose of this paper is to examine the feasibility and design of zero-energy buildings (ZEBs) in cold and semi-arid climates. In this study, to maximize the use of renewable energy, energy consumption is diminished using passive solar architecture systems and techniques. -/- Design/methodology/approach The case study is a residential building with a floor area of 100 m2 and four inhabitants in the cold and semi-arid climate, northeast of Iran. For thermal simulation, the climate data (...) such as air temperature, sunshine hours, wind, precipitation and hourly sunlight, are provided from the meteorological station and weather databases of the region. DesignBuilder software is applied for simulation and dynamic analysis of the building, as well as PVsyst software to design and evaluate renewable energy performance. -/- Findings The simulation results show a 30% decrease in annual energy consumption of the building by complying with the principles of passive design (optimal selection of direction, Trombe wall, shade, proper insulation selection) from 25,443 kWh to 17,767 kWh. Then, the solar energy photovoltaic (PV) system is designed using PVsyst software, taking into account the annual energy requirement and the system’s annual energy yield is estimated to be 26,291 kWh. -/- Originality/value The adaptive comparison of the values obtained from the energy analysis indicated that constructing a ZEB is feasible in cold and semi-arid conditions and is considered an effective step to achieve sustainable and environmentally friendly construction. (shrink)

Albania is part of the emerging economies of the Western Balkan region. Polis University is one of the pioneering institutions in the field of architecture, built environment, and city sciences that represents innovative methodologies and concepts for educational and scientific purposes. Nowadays, many constructions in Albania involve a wide range of different materials. The building envelope is one of the main elements that provide protection from the outside environment but also the required thermal comfort for the inhabitants. The necessary (...) balance must be archived between energy efficiency and the durability of buildings. This paper will focus on the thermal performance and materials composition of two different types of masonry walls, a constituent part of Polis University's main building. The study will be based on an experiment using specific instruments to diagnose these typologies of wall composition. The results are further analyzed and compared. Specific instruments such as the thermal camera (Testo 882), U-value(Testo 435-2), and “Silverline Digital Moisture Meter” (from POLIS Energy lab) are engaged. The collected data are further interpreted through graphs, tables, and diagrams for both cases. It is observed that ventilated facades perform much better than standard facades, therefore their usage is strongly recommended. (shrink)

Disagreement about how best to think of the relation between theories and the realities they represent has a longstanding and venerable history. We take up this debate in relation to the free energy principle (FEP) - a contemporary framework in computational neuroscience, theoretical biology and the philosophy of cognitive science. The FEP is very ambitious, extending from the brain sciences to the biology of self-organisation. In this context, some find apparent discrepancies between the map (the FEP) and the territory (...) (target systems) a compelling reason to defend instrumentalism about the FEP. We take this to be misguided. We identify an important fallacy made by those defending instrumentalism about the FEP. We call it the literalist fallacy: this is the fallacy of inferring the truth of instrumentalism based on the claim that the properties of FEP models do not literally map onto real-world, target systems. We conclude that scientific realism about the FEP is a live and tenable option. (shrink)

As more objections have been raised against grant peer-review for being costly and time-consuming, the legitimate question arises whether machine learning algorithms could help assess the epistemic efficiency of the proposed projects. As a case study, we investigated whether project efficiency in high energy physics can be algorithmically predicted based on the data from the proposal. To analyze the potential of algorithmic prediction in HEP, we conducted a study on data about the structure and outcomes of HEP (...) experiments with the goal of predicting their efficiency. In the first step, we assessed the project efficiency using Data Envelopment Analysis of 67 experiments conducted in the HEP laboratory Fermilab. In the second step, we employed predictive algorithms to detect which team structures maximize the epistemic performance of an expert group. For this purpose, we used the efficiency scores obtained by DEA and applied predictive algorithms – lasso and ridge linear regression, neural network, and gradient boosted trees – on them. The results of the predictive analyses show moderately high accuracy, indicating that they can be beneficial as one of the steps in grant review. Still, their applicability in practice should be approached with caution. Some of the limitations of the algorithmic approach are the unreliability of citation patterns, unobservable variables that influence scientific success, and the potential predictability of the model. (shrink)

Throughout the history of mankind, energy security has been always seen as a means of protection from disruptions of essential energy systems. The idea of protection from disorders emerged from the process of securing political and military control over energy resources to set up policies and measures on managing risks that affect all elements of energy systems. The various systems placed in a place to achieve energy security are the driving force towards the energy (...) innovations or emerging trends in the energy sector. Our paper discusses energy security status and innovations in the energy sector in European Union (EU). We analyze the recent up-to-date developments of the energy policy and exploitation of energy sources, as well as scrutinize the channels of energy streaming to the EU countries and the risks associated with this energy import. Moreover, we argue that the shift to the low-carbon production of energy and the massive deployment of renewable energy sources (RES) might become the key issue in ensuring the energy security and independency of the EU from its external energy supplies. Both RES, distributed energy resources (DER) and “green energy” that will be based on the energy efficiency and the shift to the alternative energy supply might change the energy security status quo for the EU. (shrink)

This article presents information about facades, their thermal insulating role in buildings in Albania. The façade in construction is one of the necessary factors to ensure a longer life of the buildings and indoor thermal comfort. Façade systems are composed of different materials, which provide a protective effect during the life of the building. The article will focus on the characteristic materials used in Albania for the construction of facades and the main materials used from the year 2000 up (...) to today. The article will be informative, statistical, and comparative in order to draw conclusions. Nowadays building facades are again becoming one of the main subjects of discussion, undoubtedly due to the increasing importance of the building envelope in relation to energy consumption. In the 90s, minimal attention was paid to the efficiency and quality of facades; everything was done strictly in relation to residency requirements. But, during this last decade, Albania experienced a construction boom, with a series of good new buildings, which are accompanied by progress in the architectural style and in the techniques of building materials usage. However, the advantages of façade systems in construction are not only to make the building long-lasting. The function of facades always undergoes changes and advances over time, in terms of their impact on the temperature fluctuations inside the building or energy storage. (shrink)

Abstract— According to studies, buildings use around 40% of the total energy consumption in the world. Most of this consumed energy comes from fossil fuel, one of the sources of environmental pollution. The Net Zero Energy Building (NZEB) is an alternative to this alarming pollution. With its reduced energy needs and renewable energy systems, a ZEB can return as much energy as it takes from the utility on an annual basis. Thus the main (...) objective of this study is to discuss the economical and friendly environmental renewable energy system integrated to building in Egypt to be (NZEB) economical by maximizing the renewable energy fraction and minimizing the greenhouse gases (GHG) emissions. The system consists of two renewable energy sources, comprising photovoltaic system, a wind turbine are considered for the proposed building under the study. By Utilizing the well-known Hybrid Optimization of Multiple Electric Renewables software to get the optimal configuration of a hybrid renewable energy system, based on the user inputs of loads, costs, technical details, solar and wind resources availability. (shrink)

Is it about energy?! This paper consists of the analysis of the construction of the Fierza's dam, built on the Drin river bed in 1978. During the study of the dam construction scheme and later during the design of the projects, various problems were taken into account, such as the geological conditions of the area where the hydropower plants were erected, the construction materials, the most suitable solution for the type of dam, the auxiliary works, their construction, sequence and (...) time. For centuries, the world's water resources have been developed to benefit mankind. The construction of dams in order to create reservoirs has served many purposes. These are some common uses such as water supply, hydroelectric power, flood control, irrigation, and navigation. The dams are also used to regulate the flow of water in rivers. Water can be released from the reservoir during drier seasons to support wildlife and the environment downstream, and to provide a resource for human uses. Dams have long been viewed as a symbol of human ingenuity and among them is the Fierza's dam, one of the greatest achievements in Albania. During the period of the construction of the dam, Albania was in difficulty to finance the design and the implementation of such works that envisaged large dams. Regardless of everything, the small state of Albania managed to build magnificent hydropower works with great economic value and a high technical and scientific level, such as Fierza's hydropower plant. This paper aims to show the importance of the construction of Fierza's dam in the production of energy in the country with an annual average output of 1,330 GWh. Also, the importance of Fierza, besides energy production, relates to the capacity of its lake, which regulates the annual inflows, increasing the efficient use throughout the cascade. (shrink)

The relationship between energy and ethics is gaining attention in policy rooms around the world. How does one respond to the competing interests of the environment and posterity while also addressing the energy needs of the present human generation? In Western philosophy, this question is currently subject of debate and research. However, the African philosophical analysis that is required to address this concern is generally absent from discourse/literature on energy ethics. This article aims to bridge this gap, (...) by providing broad analysis that has been lacking from the African context. In a way, it seeks to answer such questions already raised in Western philosophy but from African perspectives. This approach is significant given the fact that Western oriented energy humanities and energy ethics seem to be inappropriate or inadequate to understanding energy dynamics in the African context. Therefore, this paper aims to inform global debate and facilitate African-specific understanding of the complex nexus of human-environment-posterity by building the discourse on Braai filosofie. It discusses specific principles that can be deployed to address trade-offs between ethics and energy, thus providing guide to investment decisions on renewable energy projects in Africa. (shrink)

“There’s Plenty of Room at the Bottom”, said the title of Richard Feynman’s 1959 seminal conference at the California Institute of Technology. Fifty years on, nanotechnologies have led computer scientists to pay close attention to the links between physical reality and information processing. Not all the physical requirements of optimal computation are captured by traditional models—one still largely missing is reversibility. The dynamic laws of physics are reversible at microphysical level, distinct initial states of a system leading to distinct final (...) states. On the other hand, as von Neumann already conjectured, irreversible information processing is expensive: to erase a single bit of information costs ~3 × 10−21 joules at room temperature. Information entropy is a thermodynamic cost, to be paid in non-computational energy dissipation. This paper addresses the problem drawing on Edward Fredkin’s Finite Nature hypothesis: the ultimate nature of the universe is discrete and finite, satisfying the axioms of classical, atomistic mereology. The chosen model is a cellular automaton with reversible dynamics, capable of retaining memory of the information present at the beginning of the universe. Such a CA can implement the Boolean logical operations and the other building bricks of computation: it can develop and host all-purpose computers. The model is a candidate for the realization of computational systems, capable of exploiting the resources of the physical world in an efficient way, for they can host logical circuits with negligible internal energy dissipation. (shrink)

As the world grapples with the urgent need for sustainable development, the transition towards green energy stands as a critical imperative. Financing this transition poses significant challenges, requiring innovative approaches that align financial objectives with environmental sustainability goals. This review presents a conceptual framework for leveraging data-driven techniques in sustainable finance to facilitate the transition towards green energy. The proposed framework integrates principles of sustainable finance with advanced data analytics to enhance decision-making processes across the financial ecosystem. At (...) its core, the framework emphasizes the importance of harnessing vast datasets related to energy production, consumption, environmental impact, and financial performance. By leveraging machine learning algorithms and predictive modeling techniques, financial stakeholders can gain deeper insights into the risks and opportunities associated with green energy investments. Key components of the framework include data collection and aggregation, risk assessment, impact measurement, and investment optimization. Data sources range from traditional financial indicators to environmental metrics, social impact assessments, and geopolitical factors. Through comprehensive data analysis, financial institutions can assess the long-term viability and sustainability of green energy projects, while also evaluating potential social and environmental impacts. Risk assessment methodologies within the framework consider both financial risks, such as market volatility and regulatory uncertainty, and non-financial risks, such as climate change impacts and community resilience. By integrating these factors into risk models, investors can make more informed decisions that mitigate potential losses and maximize returns. Furthermore, impact measurement tools enable stakeholders to quantify the environmental and social benefits of green energy investments. By tracking metrics such as carbon emissions reduction, energy efficiency improvements, and job creation, investors can assess the contribution of their portfolios towards broader sustainability objectives. Finally, the framework incorporates investment optimization strategies that align financial goals with environmental objectives. Through portfolio diversification, asset allocation, and innovative financial instruments such as green bonds and impact investing funds, financial institutions can allocate capital more efficiently towards green energy projects. The conceptual framework presented herein offers a systematic approach to integrating data-driven methodologies into sustainable finance practices. By leveraging advanced analytics and comprehensive datasets, financial stakeholders can drive the transition towards green energy while simultaneously achieving financial returns and positive environmental outcomes. (shrink)

Port Cities are historically the places for paradigm shifts, radical changes, and socio-economic transitions. In particular, the interaction zone between the port infrastructure and urban activities creates liminal spaces at the forefront of many contemporary challenges. In these liminal spaces, the port's flows, form, and function intertwine with urban contexts and conflict with the living conditions. Conceptualizing the portcityscape and harborscape as liminal space and urban thresholds leads to (re)thinking about innovative participatory methods and technologies for building community resilience (...) in port cities. Additionally, inevitable constant development in port cities requires adaptability and resilience from the waterfronts to the hinterlands and city centers. Such confrontation of port infrastructures and urbanization is socio-politically and spatially challenging, specifically in historic port cities. Therefore, as the approach to exploiting energy and human resources changes over time, the physicality of the built environment in port cities and how we (re)use the resources need to be redefined. This research investigates key socio-spatial features and challenges of port cities by examining how the port's proximity to the city requires coordination, collaboration, transparency, and community dialogue. The introduction and background literature discuss three domains and notions of port city studies, building community resiliency through participatory frameworks, and parasitic architecture. By building upon this analytical framework, the paper presents case studies developed within the research-led design studio focusing on building resilient communities in four port cities, including Amsterdam, Constanta, Alexandria, and Rio De Janeiro. This research focus on the community-enabled application of emerging technologies, innovative approaches, and co-designing and co-building participatory methods. The selected case studies introduce an integrative and multi-scalar pedagogical framework for building resilient communities in liminal spaces of port cities. (shrink)

The Ethics of Energy. William James’s Moral Philosophy in Focus... brings to completion [Sergio] Franzese’s reinterpretation of James’s work, as a “philosophical anthropology,” which Franzese began articulating in several essays and in his first book on James, L’uomo indeterminato. Saggio su William James (Rome: Anselmo, 2001). James’s diverse philosophical and psychological work, Franzese argued, aimed to outline a philosophical “science of man.” This philosophical anthropology, as James once wrote about philosophy, would be erected on the building blocks provided (...) by the “special sciences.” It would not only seek to answer the central question of philosophy (the question of “the place of Man in nature”), but also to provide people with intellectual and practical tools that they could deploy in order to find the meaning of human life and better act and react within their multiple environments. (shrink)

The article studies the energy efficiency of the economy and determines the need to reform the energy sector of Ukraine and conditions of its adaptation to EU requirements. Annual energy consumption in the world is about 14 billion tons of fuel. This is mainly organic origin resources – coal, oil, natural gas – 82 %, nuclear power – 7 %, hydroelectric energy – 3%, wood – 7 % renewable energy and – 1 %. The (...) economic development of any country in our time is determined not only by the number of extracted or consumed fuel and energy resources (FER), but the efficiency of their use – energy intensity of GDP, unit costs per unit of output. These figures are better in those countries which have established effective economic and legal mechanisms to encourage energy efficiency, which in turn stimulated the development of energy-saving technologies, equipment supply and services for energy efficiency. Analysis of international experience shows that Ukraine’s energy dependence can be reduced by: increasing production and consumption of domestic energy resources; increasing the efficiency of production, transportation and consumption of energy resources; diversification of energy imports and types of energy consumed. The study emphasizes that «energy is an important prerequisite for growth and development throughout the world, and despite the global financial crisis, demand for energy is growing steadily, particularly in the large economies of China, India and Brazil, developing countries. The authors provethat energy security is largely complicated by the fact that key energy resources are concentrated geopolitically. Most of the world’s oil and gas are found in several countries, some of which «are in a state of political turmoil and are not particularly friendly to US interests»(Gray F, 2010). The conclusions can be summarized that in the context of the main areas of research reducing risks to energy security of Ukraine are: energy efficiency economy (reduce unit cost of energy per unit of GDP); increase proved reserves and production of domestic energy resources; the transition from the use of expensive imported energy resources (oil, natural gas) to other fuels, especially domestic origin; opposition to fluctuations in energy prices (particularly by combating monopolization of the energy market, development of market infrastructure provisioning energy, preservation of state fuel and energy complex and the situation in the energy market); the development of the market principles of the electricity industry, promoting competition in this area. (shrink)

Directed Diffusion (DD) uses data aggregation to suppress data overhead however there is no guarantee that paths from nearby sources join after a few hops. In this paper, an efficient data-gathering protocol (EDAP) is proposed to address this problem by using a Virtual Sink (VS) node nearby the sources, which plays the role of sink node and broadcasts local interest messages and routes gathered data toward destination. Also, multiple paths are constructed between VS and the sink node, which leads to (...) load-balancing, and increase in the lifetime of the network. Simulation results show that in EDAP a significant amount of energy can be saved and the network lifetime will be increased considerably. (shrink)

Food has been a vital material of the life since inception of all organisms. By taking food we ensure growth of our children and youth, and maintain our good health. But some foods are good and helpful for maintaining health, while some are harmful. A large part of it is scientifically beneficial for body and fulfils needs of our life style. Thus, it can be stated that food is that which nourishes our body. It may also be defined as anything (...) which is eaten or drunk, that meets the needs for energy building. In short, the food is the raw material from which our bodies are made. Intake of its any kinds amounts to health, which may be evident in our appearance, efficiency and emotional well-being. My objective of this study is that to check the health status of urban and rural health. This approach is used for rural and urban population of Allahabad district. Research design is descriptive type and data collection techniques are applied interview schedule, participant observation, sampling etc. Finally conclusion is found out in my study that variation of diet is present and health of urban people is good. (shrink)

The aim of this paper is to analyse the people behaviour in different age buildings and different buildings typology. In the city of Kruja (Albania) exists mostly three types of buildings: the historical ones (medieval), the socialist ones (which belongs to the former communist regime) and the modern buildings. Each of them has different social and physics characteristics, different energy exchange and different building materials. The influence of all these characteristics in the exchange of energy and how (...) they reflect in changing the lifestyle of Kruja’s people is going to be analysed. A questionnaire will be undertaken to understand the way of life of Kruja’s people and to draw conclusions. A comparative analysis between all these typology of buildings will be undertaken in order to understand better the behaviour of Kruja’s people lifestyle living in these buildings. Although the conditions are not good, people tend to get a high level of place attachment and loyalty to the building they are living. The biggest energy consumers are the historical buildings and socialist ones; although the bills of the electricity are smaller than the third category they consume alternative energies and have major problems with thermal bridges. The most unfriendly categories are the socialist buildings. They prefer not to socialize much in comparison with the other two categories. (shrink)

This treatise brings out a new theory of consciousness and of qualia through comments on David Chalmers book on The Foundation of Consciousness. It posits that qualia and consciousness itself is begotten from the transformation (and inherent make-up) of energy itself and that the basic building blocks of consciousness are qualia. Experience is the linking of the Will (or attention) to the outer universal qualia that exists from energy's constitution.

Many countries in Eastern Europe, during the 1960–1970s, as well as Albania responded to the growing demand for new houses utilizing the emerging trends for industrialization of the construction process and mass construction of prefabricated residential buildings based on large-panel prefabricated RC elements. During the 1970s large-panel buildings spread throughout the country and became the main type of construction in the Albanian cities such as Shkodër, Tirana, Durrës, Elbasan, Berat, etc. Most of these buildings have five or six stories and (...) comprise different modules, the number of which depends on the urban and architectonic projects. The construction technology of these types of buildings included only the construction of prefabricated reinforced concrete material and did not take into account the energy performance of these structures. Since the moment of construction, only in the last year, several interventions have been made in different cities where a layer of polystyrene has been placed on the external walls of these buildings in order to enhance their thermal insulation. The aim of this paper is to improve the thermal performance of these buildings by introducing a comparison of their initial situation as they are today and how their performance would be if innovative technologies and materials were applied. The study is going to analyse the thermal performance of the existing buildings, by means of the thermal camera in the city of Kamez, located in Tirana, which has been chosen as a key study. Furthermore, the data obtained from the MEEC application are gathered, in order to compare the previous, the existing situation and the proposed intervention. The results may be used by municipalities of different cities, not only in the Albanian context, either where interventions have been made to improve their performance, or for municipalities where thermal regulation policies have not been yet implemented for these types of buildings. The existing situation of the buildings according to the calculations, showed a poor thermal performance, regardless of the fact that they are already equipped with thermal insulation building envelope. They have to be requalified in order to be categorized as a building with high thermal performance. (shrink)

The essential biological processes that sustain life are catalyzed by protein nano-engines, which maintain living systems in far-from-equilibrium ordered states. To investigate energetic processes in proteins, we have analyzed the system of generalized Davydov equations that govern the quantum dynamics of multiple amide I exciton quanta propagating along the hydrogen-bonded peptide groups in α-helices. Computational simulations have confirmed the generation of moving Davydov solitons by applied pulses of amide I energy for protein α-helices of varying length. The stability and (...) mobility of these solitons depended on the uniformity of dipole-dipole coupling between amide I oscillators, and the isotropy of the exciton-phonon interaction. Davydov solitons were also able to quantum tunnel through massive barriers, or to quantum interfere at collision sites. The results presented here support a nontrivial role of quantum effects in biological systems that lies beyond the mechanistic support of covalent bonds as binding agents of macromolecular structures. Quantum tunneling and interference of Davydov solitons provide catalytically active macromolecular protein complexes with a physical mechanism allowing highly efficient transport, delivery, and utilization of free energy, besides the evolutionary mandate of biological order that supports the existence of such genuine quantum phenomena, and may indeed demarcate the quantum boundaries of life. (shrink)

Assembly of minimal genomes revealed many genes encoding unknown functions. Three overlooked functional categories account for some of them. Cells are prone to make errors and age. As a first key function, discrimination between proper and changed entities is indispensable. Discrimination requires management of information, an authentic, yet abstract, cur- rency of reality. For example proteins age, sometimes very fast. The cell must identify, then get rid of old proteins without destroying young ones. Implementing discrimination in cells leads to the (...) second set of functions, usually ignored. Being abstract, information must nevertheless be embodied into material entities, with unavoidable idiosyncratic properties. This brings about novel unmet needs. Hence, the buildup of cells elicits specific but awkward material implementations, ‘kludges’ that become essential under particular settings, while difficult to identify. Finally, a third functional category char- acterizes the need for growth, with metabolic implementations allowing the cell to put together the growth of its cytoplasm, membranes, and genome, spanning different spatial dimensions. Solving this metabolic quandary, critical for engineering novel synthetic biology chassis, uncovered an unexpected role for CTP synthetase as the coordinator of nonhomothetic growth. Because a significant number of SynBio constructs aim at creating cell factories we expect that they will be attacked by viruses (it is not by chance that the function of the CRISPR system was identified in industrial settings). Substantiating the role of CTP, natural selection has dealt with this hurdle via synthesis of the antimetabolite 30-deoxy-30,40-didehydro- CTP, recruited for antiviral immunity in all domains of life. (shrink)

In this paper comparative analysis of maximum power point tracking techniques has been conducted to achieve highest magnitude of power from photovoltaic array. The algorithms proposed in this paper for extracting peak output from photovoltaic array are Perturb and Observe, Incremental Conductance, and Fuzzy Logic Control. There are some limitations with conventional converters i.e. Buck-Boost converter. When the operating voltage exceeds normal voltage as the voltage becomes high, the conventional converters fail to carry high voltage and current. Apart from this (...) the ripple contents also increase abnormally due to the large impedance in the conventional converter. Similarly these converters cannot track maximum power point faster and effectively. In that case Single Ended Primary Inductor Converter (SEPIC) is the best choice instead of the conventional buck-boost converter, which is employed with the aim of extracting maximum output from the photovoltaic array. The aim of this study is to compare three MPPT techniques under varying environmental conditions with respect to maximum power extraction and speed of tracking time. SEPIC is used instead of conventional buck-boost converter in order to achieve maximum efficiency and less ripples. Also it can track maximum power point (MPP) faster than Buck-Boost Converter. Comparative analysis of three most extensively used MPPT techniques have been conducted in Simulink/Matlab. (shrink)

Generation of clean energy is one of the main challenges of the 21st century. Solar energy is the most abundantly available renewable energy source which would be supplying more than 50 of the global electricity demand in 2100. Solar cells are used to convert light energy into electrical energy directly with an appeal that it does not generate any harmful bi products, like greenhouse gasses. The manufacturing of solar cells is actually based on the types (...) of semiconducting or non semiconducting materials used and commercial maturity. From the very beginning of the terrestrial use of Solar Cells, efficiency and costs are the main focusing areas of research. The definition of so called emerging technologies sometimes described as including any technology capable of overcoming the Shockley-Queisser limit of power conversion efficiency 33.7 percent for a single junction device. In this paper, few promising materials for solar cells are discussed including their structural morphology, electrical and optical properties. The excellent state of the art technology, advantages and potential research issues yet to be explored are also pointed out. Md. Samiul Islam Sadek | Dr. M Junaebur Rashid | Dr. Zahid Hasan Mahmood "Emerging Next Generation Solar Cells: Route to High Efficiency and Low Cost" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-1 | Issue-4 , June 2017 . (shrink)

Abstract: This article reviews and analyzes the advantages and disadvantages of alternative solar energy and the use of solar panels in this process. The solar energy that is falling on the photoelements under a certain angle depends on environmental climax, season, and location. Atmospheric changes also lead to changes in the transverse and direct rays of light, which does not change the light, spectrum and intensity of falling light. These changes will change the principle of operation of the (...) QES. Also, suggestions and recommendations regarding the risks of using solar panels are provided. Moto electric devices work full time in the morning and in the evening at low power. But the highest power supply is late at night. In addition, the energy generated dramatically changes rapidly due to weather changes. In order to eliminate these shortcomings, the AES uses electric accumulators, or it can be used to transfer energy to other types of energy, and it is also used for hydraulic accumulator stations or hydrogen power. At present, the problem is solved by building a common energy system. (shrink)

Abstract: This article reviews and analyzes the advantages and disadvantages of alternative solar energy and the use of solar panels in this process. The solar energy that is falling on the photoelements under a certain angle depends on environmental climax, season, and location. Atmospheric changes also lead to changes in the transverse and direct rays of light, which does not change the light, spectrum and intensity of falling light. These changes will change the principle of operation of the (...) QES. Also, suggestions and recommendations regarding the risks of using solar panels are provided. Moto electric devices work full time in the morning and in the evening at low power. But the highest power supply is late at night. In addition, the energy generated dramatically changes rapidly due to weather changes. In order to eliminate these shortcomings, the AES uses electric accumulators, or it can be used to transfer energy to other types of energy, and it is also used for hydraulic accumulator stations or hydrogen power. At present, the problem is solved by building a common energy system. (shrink)

The development of synthetic biology calls for accurate understanding of the critical functions that allow construction and operation of a living cell. Besides coding for ubiquitous structures, minimal genomes encode a wealth of functions that dissipate energy in an unanticipated way. Analysis of these functions shows that they are meant to manage information under conditions when discrimination of substrates in a noisy background is preferred over a simple recognition process. We show here that many of these functions, including transporters (...) and the ribosome construction machinery, behave as would behave a material implementation of the informationmanaging agent theorized by Maxwell almost 150 years ago and commonly known as Maxwell’s demon (MxD). A core gene set encoding these functions belongs to the minimal genome required to allow the construction of an autonomous cell. These MxDs allow the cell to perform computations in an energy-efficient way that is vastly better than our contemporary computers. (shrink)

At the phenomenal level, consciousness can be described as a singular, unified field of recursive self-awareness, consistently coherent in a particualr way; that of a subject located both spatially and temporally in an egocentrically-extended domain, such that conscious self-awareness is explicitly characterized by I-ness, now-ness and here-ness. The psychological mechanism underwriting this spatiotemporal self-locatedness and its recursive processing style involves an evolutionary elaboration of the basic orientative reference frame which consistently structures ongoing spatiotemporal self-location computations as i-here-now. Cognition computes action-output (...) in the midst of ongoing movement, and consequently requires a constant self-locating spatiotemporal reference frame as basis for these computations. Over time, constant evolutionary pressures for energy efficiency have encouraged both the proliferation of anticipative feedforward processing mechansims, and the elaboration, at the apex of the sensorimotor processing hierarchy, of self-activating, highly attenuated recursively-feedforward circuitry processing the basic orientational schema independent of external action output. As the primary reference frame of active waking cognition, this recursive i-here-now processing generates a zone of subjective self-awareness in terms of which it feels like something to be oneself here and now. This is consciousness. (shrink)

The purpose of this paper is to argue against the claim that morphological computation is substantially different from other kinds of physical computation. I show that some (but not all) purported cases of morphological computation do not count as specifically computational, and that those that do are solely physical computational systems. These latter cases are not, however, specific enough: all computational systems, not only morphological ones, may (and sometimes should) be studied in various ways, including their energy efficiency, (...) cost, reliability, and durability. Second, I critically analyze the notion of “offloading” computation to the morphology of an agent or robot, by showing that, literally, computation is sometimes not offloaded but simply avoided. Third, I point out that while the morphology of any agent is indicative of the environment that it is adapted to, or informative about that environment, it does not follow that every agent has access to its morphology as the model of its environment. (shrink)

The authors of the book have come to the conclusion that it is necessary to effectively use modern approaches the management of competitiveness the economic entities in order to increase the efficiency of using the resource potential, formation of competitive advantages and development strategies. Basic research focuses on economic diagnostics of ensuring the competitiveness of economic entities, marketing and logistics, analysis of energy-efficient potential, assessment of development potential. The research results have been implemented in the different models of (...) inventory management, corporate social responsibility management, business process management and project management. The results of the study can be used in decision-making at the level the economic entities in different areas of activity and organizational-legal forms of ownership, ministries and departments that promote of development the economic entities and increase their competitiveness. The results can also be used by students and young scientists in modern concepts and mechanisms for management of competitiveness the economic entities in the context of efficient use the resource potential and introduction of modern innovations. (shrink)

The authors of the book have come to the conclusion that it is necessary to effectively use the methodological tools for assessing the competitiveness of financial and insurance markets, methodological approaches to assessing the effectiveness of regional policy, internal audit of resources. Basic research is aimed at researching the main trends in the international economy, socialization of global economic development, investment aspects of development countries, functioning of consumer market in the international economic system, trends of international population migration, processes of (...) European integration in the field of energy efficiency. The research results have been implemented in the different models of the behavior of the economic system in the conditions of crisis, provision competitiveness of national economy in the face of increasing burden of public debt. The results of the study can be used in decision-making at the level of international business, ministries and departments that regulate international relations, ensuring security and overcoming risks. The results can also be used by students and young scientists in modern concepts of the formation of international economic relations in the context of strengthening European integration processes and globalization of the economy. (shrink)

In IEEE 802.15.4 standard for low-power low-range wireless communications, only one channel is employed for transmission which can result in increased energy consumption, high network delay and poor packet delivery ratio (PDR). In the subsequent IEEE 802.15.4-2015 standard, a Time-slotted Channel Hopping (TSCH) mechanism has been developed which allows for a periodic yet fixed frequency hopping pattern over 16 different channels. Unfortunately, however, most of these channels are susceptible to high-power coexisting Wi-Fi signal interference and to possibly some other (...) ISM-band transmissions. This interference manifests itself in the form of the presence/absence of other devices with either or both static and dynamic channel selection policies. In order to isolate channels with undesirable conditions, blacklisting mechanisms are defined to adapt the channel hopping process. However, the existing solutions which form blacklists unrealistically assume that the statistical model of the external interference remains fixed, and do not vary over time. In this paper, we realistically assume that the impact of external interferes on 802.15.4 may generally follow a non-stationary pattern, and accordingly formulate the adaptive channel hopping problem as a Dynamic Multi-Armed Bernoulli Bandit (Dynamic MABB) process from the machine learning theory. We then propose an online learning algorithm with track-ability properties for computing an adaptive hopping policy. Simulations confirm that when the statistics of the external interference has a switching regime, the proposed solution outperforms the previous schemes in terms of both energy efficiency as well as two important KPIs for TSCH-based networks, i.e., PDR and latency. (shrink)

The authors of the book have come to the conclusion that it is necessary to effectively use modern approaches the management of competitiveness the economic entities in order to increase the efficiency of using the resource potential, formation of competitive advantages and development strategies. Basic research focuses on economic diagnostics of ensuring the competitiveness of economic entities, marketing and logistics, analysis of energy-efficient potential, assessment of development potential. The research results have been implemented in the different models of (...) inventory management, corporate social responsibility management, business process management and project management. The results of the study can be used in decision-making at the level the economic entities in different areas of activity and organizational-legal forms of ownership, ministries and departments that promote of development the economic entities and increase their competitiveness. The results can also be used by students and young scientists in modern concepts and mechanisms for management of competitiveness the economic entities in the context of efficient use the resource potential and iintroduction of modern innovations. (shrink)

The global Climate Change has unprecedented consequences in terms of scale and severity over human life. The accumulation of greenhouse gases and CFCs has increased environmental deterioration which is called global warming. Erratic changes in weather, brutal blizzards and floods, vicious heat wave etc. are only some of the effects of climate change. But the most dangerous effect of climate change is the melting of ice caps on the poles due to which sea levels are rising dangerously and life at (...) the poles is threatened. It is also a reality that habitation in several countries , not very much above the sea-level, for example, Maldives, Sri Lanka, Bangladesh and Indonesia, which have a threat of huge displacement of human beings and domestic animals due to global warming. The survival of millions of people in developing countries like India is more vulnerable to the negative impacts of climate change because of their limited capacity in terms of human financial and institutional resources. India is the world’s fourth largest economy and fifth largest greenhouse gas (GHG) emitter, accounting for about 5% of global emissions. India’s emissions increased 65% between 1990 and 2005 and are projected to grow another 70% by 2020. The major impacts of Climate Change on India are major shifts in temperature, effect on monsoons, rising of sea levels, change in crop cycle, etc. India has prepared the National Action Plan on Climate Change (NAPCC) in 2008 for energy efficiency and sustainable development. India is a part to the United Nations Framework Convention on Climate Change. Under the Ministry of Environment and Forests, a National Inventory Management System (NIMS) has been formed to generate a comprehensive knowledge base on scientific issues related to climate change and mitigation. This paper highlights the issue of impacts of climate change and measures adopted by the government to minimize the dangers. (shrink)

Ideas for explaining the mechanism of gravity involving the expansion of matter have been proposed several times since the 1890’s. Due to their radical nature and other reasons, these ideas have not gotten much attention. Another essential feature needed to augment the viability of the model proposed here---even more important than matter expansion---is that of space generation. I.e., the production of space by matter, involving motion into or outfrom a fourth spatial dimension. An experiment is proposed whose result would unequivocally (...) either falsify the model or support it. Analyses of star cluster velocity dispersions suggest that some support already exists. The simplest, most definitive way to test the model is to build and operate an apparatus that may be called a Small Low-Energy Non-Collider. Essentially the same experiment was proposed by Galileo in 1632. We are way overdue to at last bring to fruition this idea put forth by the Father of Modern Science so long ago. (shrink)

Biological order provided by α-helical secondary protein structures is an important resource exploitable by living organisms for increasing the efficiency of energy transport. In particular, self-trapping of amide I energy quanta by the induced phonon deformation of the hydrogen-bonded lattice of peptide groups is capable of generating either pinned or moving solitary waves following the Davydov quasiparticle/soliton model. The effect of applied in-phase Gaussian pulses of amide I energy, however, was found to be strongly dependent on (...) the site of application. Moving solitons were only launched when the amide I energy was applied at one of the α-helix ends, whereas pinned solitons were produced in the α-helix interior. In this paper, we describe a general mechanism that launches moving solitons in the interior of the α-helix through phase-modulated Gaussian pulses of amide I energy. We also compare the predicted soliton velocity based on effective soliton mass and the observed soliton velocity in computer simulations for different parameter values of the isotropy of the exciton-phonon interaction. The presented results demonstrate the capacity for explicit control of soliton velocity in protein α-helices, and further support the plausibility of gradual optimization of quantum dynamics for achieving specialized protein functions through natural selection. (shrink)