Graphene nanomemories have been developed molecularly, providing excellent programmable nanoscale memory performance compared to previous graphene memory devices and a memory window. Large (12V), fast switching speed (1 microsecond), shows strong electrical reliability. Graphene molecular nanomemories show unique electronic properties, and their small dimensions, structural strength, and high performance make them a charge storage medium for Nano memory applications. We use a set of techniques involving a solution of nanoparticles, which creates a very thin layer on the target (...) substrate and is used as a sacrificial layer during the nanopatterning process. (shrink)

Note: Many types of nanosensors are designed using CP nanomaterials for nanobiological applications. (Conductive surface) The oxidation of conductive polymeric materials is easily altered by redox mechanisms, and the charge transfer properties of these materials are affected by structural parameters, such as diameter and dimensions. CP materials are able to provide sensitive and rapid responses to specific biological and chemical species. Techniques such as chemical polymerization are often used to make CP nanomaterials. Manufacturing strategies can be divided into three categories: (...) hard mold synthesis, soft mold synthesis, and mold-free synthesis. The most widely used conductive polymers in nanosensors are nanomaterials made from CP due to their unique chemical and electrical properties resulting from the properties of their pie-electron nanosystem. Many modeling and functionalization technologies are being developed to control the location, distribution, amount, or structure and orientation of biological nanomolecules at the nanomaterial level. Therefore, our level of contact between biological nanomolecules and nanomaterials is of particular importance in countless applications. Covalent and non-covalent modifications are two general methods for coupling biological molecules and CP nanomaterials. Covalent functionalization is a chemical process in which a strong bond or relationship between nanomaterials and biological molecules is formed. In many cases, surface chemical modifications are required to create active groups that can bind to biomolecules. Unlike covalent functionalization, in the non-covalent method, nanomolecules can be removed without destroying the geometric and electronic structure on the surface. Nanomaterials are formed. Conclusion : The large surface-to-volume ratio in nanostructures and the high potential for signal amplification provide ideal conditions for marking and detecting biological elements in the structure of nanosensors. (shrink)

Fullerenes are among the materials that many nano materials are based on. Their unique structural and electronic properties, as well as their use in various fields such as electronic applications such as making nano electrodes used in special electrical circuits , nano photonics in nano solar cells and nano absorbers of specific wavelengths. Layers of nanotubes can behave like a metal and be electrically angled. Changing the structure and building in them can show the (...) characteristics of semiconductors. or be non-conductive. For example, a slight change in the helix can change the tube from a metal to a wide-gap semiconductor. -/- . (shrink)

Note: NI_nanoparticle nickel nanoparticles is a strong conductor of electric current and its surface is shiny and polished. This element belongs to the group of iron and cobalt elementsUsing particles from the microscale to the nanoscale provides benefits for various scientific fields, but because a large percentage of their atoms is on the surface, nanomaterials can be highly reactive and pose risks. have a potential for humans. Nanoparticles are of great interest due to their wide application, both in industry and (...) in the natural sciences. While natural materials have constant physical properties regardless of size, the size of a nanoparticle determines its physical and chemical properties. Therefore, the properties of a material change as its size approaches the nanoscale and the percentage of atoms on the surface of the material becomes significant. The important feature of all nano structures is that in which the number of surface atoms is more than the number of volume atoms. This ratio increases with decreasing nanoparticle size. Therefore, the size of the nanoparticle is considered its most important feature. The range of activity of nanoparticles depends on the nature and shape of the nanostructure. However, if the energy of the nanoparticle field is comparable to the energy of electromagnetic radiation and if in a certain range a wavelength with the occurrence of chemical reactions in materials Under irradiation, significant changes will be made in the activity of nanoparticles up to 100 nm in size. is the nanometer expected to be used for storage. Given the relatively large (physically speaking) storage devices we have now and the fact that we need gigabyte sizes in various areas, there is a high potential for activity in this There is a context. Each quantum dot consists of a discrete ball of several hundred atoms that can have one of two magnetic states. This allows them to contain a single bit of information (zero or one), as is customary in machine computing. In conventional hard disks, the data bits must be spaced far enough apart that they do not overlap. Quantum dots act as completely independent units that are not structurally connected, so they can become somewhat closer to each other. One of the new information storage tools is the use of nickel quantum dots in nanometer sizes, which are expected to be used to store terabytes of data. (shrink)

Devices based on organic materials can be mechanically flexible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make flexibility impossible in them. Makes. Properties such as strength, flexibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties (...) of the material by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

Electrostatic nanocapacitors also benefit from a very short distance between their electrodes. Electrostatic nanocapacitors are unique in this respect. If the electrodes are far apart, like charges on their surface strongly repel each other. When the electrodes are placed closer together, the negative and positive charges on both sides balance these repulsive forces, and more total charge can be stored in a given area.

Production of nano supercapacitors using nanoparticles that can be polarized so that electrical energy can be stored. Nanostructure multilayer technology (solid state) is a known dielectric material used in nano supercapacitors because it is a piezoelectric and ferroelectric material. In this work, by creating passive filters, they provide storage between different types of these electric nano layers. The degree of electrical properties in solid materials (nanosupercapacitors) is very diverse. Based on the amount of resistance ( (...) class='Hi'>nano supercapacitors) against the passage of electric current, different materials can be divided into categories classified as conductor, semiconductor, and insulator. Meanwhile, in superconductors, there is a different mechanism to guide electrons. (Nano supercapacitors) can be defined as the number of free electrons that move freely in the material under the influence of an external electric field, as well as mobility, which is a measure of the ability and speed of free electrons to move, attributed. (shrink)

An increase in the surface-to- volume ratio and changes in geometry and electronic structure have a strong impact on the chemical interactions of matter, and for example, the activity of small particles changes with changes in the number of atoms (and thus the size of the particles). Unlike today's nano-transistors, which behave based on the movement of a mass of electrons in matter, new devices follow the phenomena of quantum mechanics at the nano scale, in which the discrete (...) nature of electrons cannot be ignored. By reducing all the horizontal and vertical dimensions of the transistor, the electric charge density increases in different areas of the nano-transistor , or in other words, the number of electric charges per unit area of the nano-transistor increases. (shrink)

Nowadays, many semiconductors such as silicon are used in a wide range of nanoelectronic devices. However, due to the range of thermal changes and its extremely high speed, nano diamond is only compared to gold nanoparticles, which is the second best nano semiconductor in the world. Nano graphite and graphene nano strips are electrically conductive due to cloud scattering. Active nano diamond particles with such features, especially electronic ones, can be the foundation of completely new (...) types of powerful nano electronic devices. (shrink)

Nanoparticles can also be used as catalysts due to their high surface area. Of course, catalytic properties also occur in certain dimensions like magnetic properties. In other words, nanoparticles usually have catalytic properties if their specific surface is between 100 and 400 square meters per gram. Therefore, among nanoparticles with a specific volume, a nanoparticle with a larger surface area shows better catalytic properties. An example of nanoparticles that act as catalysts where various substances are placed on their surface and (...) chemical reactions are carried out. Apart from the mentioned cases, nanoparticles have many other applications in various medical industries (drug delivery, etc.), automobiles (anti-fogging windows, lightening the body, strengthening tires), electronics (making transistors), etc. The strength of carbon-carbon bonds gives carbon nanotubes amazing electronic properties. No previous material exhibits the extraordinary combination of mechanical, thermal and electronic properties attributed to them . However, their conductivity is what sets them apart. Multi-layered carbon nanotubes are the strongest materials that mankind has discovered so far in terms of electronic conductivity. The highest tensile strength or breaking strain for a carbon nanotube was up to 63 GPa, which is about 50 times more than the strongest conductors. Even the weakest types of multi-layered carbon nanotubes have multifold power in electronic conduction. These properties, along with the lightness of carbon nanotubes, give them great potential in applications such as aerospace. The electronic properties of the wall of carbon nanotubes are also extraordinary. It has high electrical conductivity (comparable to copper). It is particularly noteworthy that nanotubes can be metallic or semiconducting. The rolling action breaks the symmetry of the planar system and imposes a specific direction with respect to the hexagonal grid and the axial direction. Depending on the relationship between these axial directions and the unit vectors that describe the hexagonal lattice, nanotubes may behave electrically like metals or semiconductors , with some nanotubes having higher conductivity than copper, while Others behave more like silicon . And there are possibilities of making nano electronic devices from multi-layer nanotubes of CNTs. (shrink)

based on organic materials can be mechanically exible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make exibility impossible in them. Makes. Properties such as strength, exibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties of (...) the material by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

The division is based on the wavelength of the output beam and the wave- length of the output beam of the wide range nano laser. According to this and the wavelength, the types of nano lasers include infrared, visible and ultraviolet lasers, for example, the nano laser produces a beam with a wavelength of about 858.32 X-rays, the wavelength of a solid nano laser is between 9.6 and 10.6 It is a microme- ter. This is because (...) the wavelength of liquid lasers are in the infrared and ultraviolet regions, respectively. (shrink)

Magnetic water is generally water that passes through a magnetic field created based on specific calculations, and therefore the water changes, improving its physical and chemical properties. Magnetic system can treat water salinity.

Note: In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. -/- The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can (...) be 100 times lower than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

All electrochemical nano biosensors that have a molecular base depend on a very specific system to detect or track their target molecule. The importance of an electrochemical nanobiosensor is to provide a suitable support for connecting the target molecule to the probe and creating an electrical signal that can be measured and read.

Nanowires ( SiNWs) have high mobility and surface-to-volume ratio, which makes them easy to control using a weak electric field. These one-dimensional nanostructures are created from nanowires with a diameter in the range of nanometers and a length of more than a micrometer. It has been done in the manufacture of nanowires through regular one-dimensional arrays with the help of different physical and chemical methods. Methods such as the use of electron beam or lithography method, heavy ion irradiation, laser, chemical (...) and electrochemical methods such as water heat and spontaneous assembly methods used to make the membranes of molds can also be used . In making one-dimensional nanostructures such as Oligophenylene vanillin nanowires The electro-accumulation method consists of three general steps: firstly, the creation of a porous template as a suitable substrate and framework for the accumulation of nanowires, secondly, the growth of nanowires along the cavities of the template, and thirdly, removing the template and separating the nanowires from it. The nanowires are directly dependent on the characteristics of the mold surface such as the size distribution of the holes, the density of the holes and the superiority of the surface of the nano-holes. In order to control the properties of Oligophenylene vanillin nanowires, parameters that are effective in the formation and optimization of the diameter of the holes and the thickness of the mold should be considered. (shrink)

In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can be 100 (...) times lower than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

Note: Nanoelectronics technology has dedicated some very exciting materials to improve the sensing phenomenon. The use of various nanomaterials, including nanoparticles, nanotubes, nanotubes, and nanowires, causes faster identification and reproducibility in a much better way. The unique properties of nanomaterials such as high electrical conductivity, better shock tolerance, and sensitive responses such as versatile piezo-electric and color detection mechanisms are only results of the multitude of properties of nanomaterials. Different types of biosensors are propagated based on different types of (...) nano materials and their developmental and implicit aspects. Measurement of biological responses has assumed great importance in the current scenario of ever-dynamic environmental developments and altered hemostatic events occurring at the in vivo as well as intracorporeal level. Analyzing the behavior of changing materials is of great importance in areas such as pharmaceutical diagnostics, food quality screening, and environmental applications. (shrink)

Signal measurement Electrochemical methods are very suitable for detecting direct DNA oxidation because electrochemical reactions directly generate electronic signals and therefore do not require expensive converters. In addition, in this process, because the order of the immobilized game can be limited to onlya series of electrode substrates, the act of tracking is performed by a series of in expensive electrochemical analyzes. Electrochemical sensors are used to perform clinical or environmental tests; The basis of the sensitivity of electrochemical signals to direct (...) oxidation orinterval catalysis of DNA is also based on the reduction reactions of reporter molecules or enzymes. (shrink)

The nature and structure of time and time-intervals in physical, chemical and biological systems will be elucidated. The relation and dependence among time, energy and taking place of natural processes will be critically analyzed. The bio-processes taking place in nano-time intervals will be identified. Their relevance to nano-bio-science and nano-bio-technology will be developed and nano-time interval-aspect of nano-sciences and nano-technology will be advanced. -/- .

In the last decade there has been an upsurge in the popularity of electric mountain bikes. However, opinion is divided regarding the implications of this emerging technology. Critics warn of the dangers they pose to landscapes, habitats, and ecological diversity, whilst advocates highlight their potential in increasing the accessibility of the outdoors for riders who would otherwise be socially and/or physically excluded. Drawing on interview data with 30 electric mountain bike users in England, this paper represents one of the first (...) attempts to empirically explore the experiential, ecological and socio-cultural implications of this activity. Utilising Stiegler’s (2013a) account of the pharmakon, in which technology is positioned as both remedy and poison, we suggest that the e-mountain bike’s role in the promotion of social and environmental responsibility is both complex and contradictory. Specifically, findings indicate that while this assistive technology can play a key role in facilitating deeper connections between riders as well as an ethic of care towards others, it can, at the same time, generate more individualised and automated experiences of recreational mobility in outdoor environments. (shrink)

The antenna is considered as the primary means of absorbing electromagnetic waves in space and has its own engineering knowledge, which is very developed and extensive. In general, in order to receive the electromagnetic wave in space, the dimensions of the antenna must be in the order of the size of the input wavelength to its surface. Due to the very low dimensions of nano-sensors, nano-antennas need a very high operating frequency to be usable. The use of graphene (...) greatly helps to solve this problem. Wave propagation velocities in CNTs and GNRs can be up to 100 times slower than vacuum velocities, depending on the physical structure, temperature and energy. Accordingly, the resonant frequency of graphene-based nano-antennas can be twice as low as (nano-carbon) nano-antennas. (shrink)

Neuroscience has studied deductive reasoning over the last 20 years under the assumption that deductive inferences are not only de jure but also de facto distinct from other forms of inference. The objective of this research is to verify if logically valid deductions leave any cerebral electrical trait that is distinct from the trait left by non-valid deductions. 23 subjects with an average age of 20.35 years were registered with MEG and placed into a two conditions paradigm (100 trials (...) for each condition) which each presented the exact same relational complexity (same variables and content) but had distinct logical complexity. Both conditions show the same electromagnetic components (P3, N4) in the early temporal window (250–525 ms) and P6 in the late temporal window (500–775 ms). The significant activity in both valid and invalid conditions is found in sensors from medial prefrontal regions, probably corresponding to the ACC or to the medial prefrontal cortex. The amplitude and intensity of valid deductions is significantly lower in both temporal windows (p = 0.0003). The reaction time was 54.37% slower in the valid condition. Validity leaves a minimal but measurable hypoactive electrical trait in brain processing. The minor electrical demand is attributable to the recursive and automatable character of valid deductions, suggesting a physical indicator of computational deductive properties. It is hypothesized that all valid deductions are recursive and hypoactive. (shrink)

Earth Hour is one of the most popular environmental events in Vietnam. However, looking at the rise in electricity consumption in the country, it is impossible to feel its impact.

nanological gates, in order to design nano-scale computers with dual-scale capabilities. All living biological systems function due to the molecular interactions of different subsystems. Molecular components (proteins and nucleic acids, lipids and carbohydrates, DNA and RNA) can be used as an inspirational strategy on how to design high-performance NEMS and MEMS that have the required features and characteristics. Considered. In addition, analytical and numerical methods are available for dynamic analysis and three-dimensional geometry, bonding and other properties of atoms and (...) molecules. Thus, electromagnetic and mechanical, and other physical and chemical properties can be studied. Nanostructures and nanosystems can be widely used in medicine and health. Possible applications of nanotechnology include: drug synthesis and drug delivery (therapeutic potential is greatly increased due to the effective direct delivery of new types of drugs to specific sites in the body), nanosurgery and nanotherapy Synthesis and detection of genomes, nano-scale stimuli and sensors (diagnosis and prevention of disease), design and implantation of non-rejection artificial organs and design of high performance nanomaterials. It is important that these technologies change the manufacture of materials, devices and systems. (shrink)

In physics most phenomena in the microcosm have some kind of an explanatory description. But at the smallest scale size there exists no description of an underlying “tangible” explanatory structure. That is why the description of the origin of the electric charge is more or less lim­ited to a link to particles that carry the electric charge.

The paper focuses on the part of the Coulomb’s Law that is just a definition and provides one possible mechanism for operationally defining electric charge based on the concept of force. Then a derivation of Coulomb’s law from the definition is presented and the sign of the charges are defined. Finally, the paper concludes with a discussion on the conservation of charge.

This paper aims to identify computerized management information systems resources and their relationship to the development of performance in the Electricity Distribution Company in Gaza. This research used two dimensions. The first dimension is computerized management information systems and the second dimension the Development of Performance. The control sample was (063). (360) questioners were distributed and (306) were retrieved back with a percentage of (85%). Several statistical tools were used for data analysis and hypotheses testing, including reliability correlation using Cronbach’s (...) alpha, “ANOVA”, Simple Linear Regression and Step Wise Regression. The overall findings of the current study suggested the presence of a statistically significant relationship between resources (physical, software, and human and organizational) for the computerized management information systems and the development of performance in the Electricity Distribution Company in Gaza. The study recommended the following: The need to strengthen the company's management interest in the potential of computerized management information systems and using them in the computerization of all the company's activities. And the need to involve workers and users in the design of computerized management information systems and assessment and development process. And strengthen the relationship between users and information systems personnel in the department responsible for the system. And it is essential that the company is developing the infrastructure for information technology in general, and computerized management information systems, in particular for the development of performance. And increase interest in providing resources (physical, software, and human and organizational) for the computerized management information systems. The current study is unique by the virtue of its nature, scope and way of implied investigation, as it is the first study at Electricity Distribution Company in Gaza resources explores the status of Computerized management information systems and their relationship to the development of performance in the Electricity Distribution Company in Gaza increasing interest in Computerized management information systems through continuity, keeping pace with technological means and modern techniques. (shrink)

Abstract Introduction Logically valid deductive arguments are clear examples of abstract recursive computational proce‐ dures on propositions or on probabilities. However, it is not known if the cortical time‐consuming inferential pro‐ cesses in which logical arguments are eventually realized in the brain are in fact physically different from other kinds of inferential processes. Methods In order to determine whether an electrical EEG discernible pattern of logical deduction exists or not, a new experimental paradigm is proposed contrasting logically valid and (...) invalid inferences with exactly the same content (same premises and same relational variables) and distinct logical complexity (propositional truth‐functional operators). Electroencephalographic signals from 19 subjects (24.2 ± 3.3 years) were acquired in a two‐condition para‐ digm (100 trials for each condition). After the initial general analysis, a trial‐by‐trial approach in beta‐2 band allowed to uncover not only evoked but also phase asynchronous activity between trials. Results showed that (i) deductive inferences with the same content evoked the same response pattern in logically valid and invalid conditions, (ii) mean response time in logically valid inferences is 61.54% higher, (iii) logically valid inferences are subjected to an early (400 ms) and a late reprocessing (600 ms) verified by two distinct beta‐2 activa‐ tions (p‐value < 0,01, Wilcoxon signed rank test). Conclusion We found evidence of a subtle but measurable electrical trait of logical validity. Results put forward the hypothesis that some logically valid deductions are recursive or computational cortical events. Keywords Beta‐2 band, Evoked potentials, Induced potentials, Deductive inference, Logical validity, Cortical bases of logical reasoning. (shrink)

The recent advent of high-resolution imaging and force spectroscopy using atomic force mi- croscopy (AFM) in organic and inorganic solutions opens the way to imaging a wide variety of surfaces and their solvent structure. However, to take full advantage of the high resolution and provide signicant new analytical capability, a detailed understanding of the background contrast mechanisms that lead to atomic and molecular resolution is critical. Without a theory that connects the measured force to atomic models of the surface and (...) tip of the microscope, the information that can be distilled from these measurements is limited. Molecular dynamics simulations show that the forces acting on the microscope tip result from the direct interaction between a tip and a surface and are entirely due to the structure of water around the tip and surface. (shrink)

Household electricity consumption rates are increasing globally. However, saving electricity can decrease energy use, avoid wastage, and save financial resources for households. Therefore, this study was conducted to determine how attitude influences electricity-saving behaviors among household users in Nsukka District, Enugu State, Nigeria. The study adopted a descriptive survey design. A research question with corresponding null hypotheses was formulated and tested at a 0.05 level of significance. Stratified random sampling was used to select 400 household users, consisting of 206 females (...) and 194 males. A structured questionnaire was used to collect information from the respondents. The questionnaire was validated by three experts and tested for reliability using the Cronbach alpha method. It contained respondents' personal data (biodata and demographics) and 28 items on attitudinal factors. The data obtained were analyzed to determine mean responses, and t-tests were used to test the null hypotheses at a 0.05 level of significance. The study found that gender does not influence the attitude of household users towards electricity-saving behaviors. It is recommended that government and non-government bodies organize training programs for household users of electricity to improve their attitude and promote more electricity-saving behaviors. (shrink)

India dropped its target of 500 GW of renewable energy capacity fossil fuel sources by 2030. Its responsibilities the United Nations Framework Convention Climate Change [UNFCCC],and reducing radiations by one billion tonnes by the end of the decade at the COP26 conference, held in Glasgow in November 2022. Researchers are continually searching for inexhaustible and reasonable energy sources. Solar energy is one of the greenest sources of energy and is also one of the cleanest. The most important factor in using (...) solar energy is the location of the solar power plant. The main objective of this study is to find the best location for a new solar power plant in a specific region called Bundelkhand region of Uttar Pradesh in India. Here we offer an extension of ELECTRE III method as two-phase Pythagorean neutrosophic elimination and choice translating reality PN-ELECTRE-III) method to adapt with fuzzy, ambiguous, unsure, and indeterminate criteria. The Pythagorean neutrosophic numbers [PNNs] used by the group decision support system of PN-ELECTRE III to measure performance of the alternatives. The options are entirely outclassed in the subsequent stage in view of the past stage's evaluations of them. By defining PNN we describe the technique of indifference threshold functions, preference treshold and veto threshold functions, which provide a more stable basis to drop outranking relations. By calculating the concordance credibility, discordance credibility and net credibility degrees of each alternative, the ranking module of the PN-ELECTRE III approach is made simpler. In order to confirm the applicability of the strategy suggested in this paper, the location selection problem for solar plants is finaly solved. (shrink)

The research aims to identify the impact of the management requirements on operating of computerized management information systems to improve performance, and discuss the perceptions of respondents to develop the performance of employees in the Gaza Electricity Distribution Company, the researchers used the stratified sample method, (360) questionnaires were distributed on the study sample, (306) questionnaires were recoved with a percentage of (85%). The most important findings of the study: computerized MI have a positive impact on the development of performance (...) in the Gaza Electricity Distribution Company systems. The is statistical significance impact between “the physical, software supplies, human and organizational” requirements for the management and operation of computerized management information systems and performance development in the Gaza Electricity Distribution Company. -/- The research also concluded a series of recommendations: the need to strengthen the company's management interest in the use of computerized management information systems in all its components and elements of being an important variable which contributes to the effect on performance development. It's essential that we develop the infrastructure for information technology in general, and computerized management information systems, in particular for the development of performance. Increased interest in providing the material of equipment and devices used in the computerized management information system requirements. Interest in providing technical inputs to the computerized management information systems through keeping pace with technological means and modern techniques and work on the training of personnel to use those systems. And increased attention to human inputs of computerized management information systems "specialists technicians and end-users" through a variety of disciplines working in the field of computerized management information systems. (shrink)

A short position paper on how we can preemptively anticipate and design nanotechnology-safe futures.

Here, we continue the discussion in [1], about infinities in Physics. Our goal is to create a Mathematical system to give a probable explanation for infinities in QED, based on Fuzzy time. This Mathematical system should be sufficiently satisfactory and Simple. In general, our goal of these series, is to provide more reasons to consider time as a fuzzy concept in a way that is explained in [4], [5], [6].

Hybrid Electric Vehicles (HEVs) have gained significant popularity due to their reduced environmental impact and fuel efficiency. However, the complex integration of electrical and mechanical systems in HEVs presents significant cooling challenges. A robust cooling system is essential to maintain optimal performance and extend the lifespan of powertrains and battery systems. This paper explores the development of an advanced cooling system designed specifically for HEV powertrains, leveraging modern technologies such as heat exchangers, liquid cooling, and smart thermal management systems. (...) The proposed system uses adaptive cooling mechanisms that adjust based on real-time vehicle operating conditions to maximize efficiency and reduce energy consumption. Additionally, machine learning algorithms are integrated into the cooling system for predictive maintenance, identifying potential issues before they arise. By optimizing thermal management, the system ensures higher efficiency, improved vehicle performance, and a longer life for HEV components. This paper presents an analysis of the current cooling technologies in HEVs, identifies gaps in their functionality, and proposes a novel cooling framework that addresses these limitations, making HEVs more viable for longterm sustainability and performance. (shrink)

Hybrid Electric Vehicles (HEVs) are known for their ability to reduce carbon emissions and fuel consumption. However, managing the thermal aspects of HEVs, especially concerning their powertrains and battery systems, remains a significant challenge. Traditional cooling mechanisms often result in inefficiencies due to their static nature. This paper proposes an AI-based thermal management system designed to address these limitations by offering dynamic, adaptive thermal regulation for HEVs. The system integrates real-time data monitoring with AI algorithms to optimize the cooling process (...) based on vehicle operating conditions, thereby reducing energy wastage and enhancing overall vehicle performance. By employing machine learning models, the system can predict thermal anomalies and adjust cooling efforts accordingly, thereby preventing overheating, improving battery life, and minimizing wear on the electric motor and power electronics. The proposed AI-based thermal management system combines predictive analytics, data-driven decision-making, and advanced cooling methodologies to ensure optimal thermal regulation under varying driving conditions. This paper provides a comprehensive overview of existing thermal management technologies in HEVs, identifies current challenges, and presents the AI-enhanced system as a cutting-edge solution for improving HEV efficiency and reliability. (shrink)

This study focuses on implementing electric vehicles (EVs) in developing countries where energy production is mainly based on fossil fuels. Although for these countries the environmental short-run benefits of the EVs cannot offset the short-run costs, it may still be the best option to implement the EVs as soon as possible. Hence, it is necessary to evaluate the alternatives to introducing EVs to the market due to the environmental concerns that created an opportunity for some developing countries to catch up (...) with the international competition. Therefore, we develop a case scenario to explore the decision-making process in implementing the EVs with three alter natives and twelve criteria. We solve the decision-making problem by using Type-2 neutrosophic numbers (T2NNs) based on the RAFSI (Ranking of Alternatives through Functional mapping of criterion sub-intervals into a Single Interval) method. The proposed model combines the advantages of the RAFSI technique, and it applies T2NNs to address the uncertainties. The results show that the alternatives that may suspend the implementation of the EVs are inferior. Direct implementation of EVs is prioritized. The policy implications of the results are discussed in the study. (shrink)

A central debate in philosophy and neuroscience pertains to whether PFC activity plays an essential role in the neural basis of consciousness. Neuroimaging and electrophysiology studies have revealed that the contents of conscious perceptual experience can be successfully decoded from PFC activity, but these findings might be confounded by post- perceptual cognitive processes, such as thinking, reasoning, and decision-making, that are not necessary for con- sciousness. To clarify the involvement of the PFC in consciousness, we present a synthesis of research (...) that has used intracranial electrical stimulation (iES) for the causal modulation of neural activity in the human PFC. This research provides compelling evidence that iES of only certain prefrontal regions (i.e., orbitofrontal cortex and anterior cingu- late cortex) reliably perturbs conscious experience. Conversely, stimulation of anterolateral prefrontal sites, often con- sidered crucial in higher-order and global workspace theories of consciousness, seldom elicits any reportable alterations in consciousness. Furthermore, the wide variety of iES-elicited effects in the PFC (e.g., emotions, thoughts, and olfactory and visual hallucinations) exhibits no clear relation to the immediate environment. Therefore, there is no evidence for the kinds of alterations in ongoing perceptual experience that would be predicted by higher-order or global workspace theories. Nevertheless, effects in the orbitofrontal and anterior cingulate cortices suggest a specific role for these PFC subregions in supporting emotional aspects of conscious experience. Overall, this evidence presents a challenge for higher-order and global workspace theories, which commonly point to the PFC as the basis for con- scious perception based on correlative and possibly confounded information. (shrink)

This paper aims to identify Performance development and its relationship to demographic variables among users of computerized management information systems in Gaza Electricity Distribution Company. This research used two dimensions. The first dimension is demographic variables among users of computerized management information systems and the second dimension the Development of Performance. The control sample was (360) questioners were distributed and (306) were retrieved back with a percentage of (85%). Several statistical tools were used for data analysis and hypotheses testing, including (...) reliability correlation using Cronbach’s alpha, “ANOVA”, Simple Linear Regression and Step Wise Regression. The overall findings of the current study suggested The results showed that: demographic variables among users of computerized management information systems have a positive relationship on the development of performance in Gaza Electricity Distribution Company, there were no statistically significant differences between the perceptions of respondents about performance development and its relationship to demographic variables among users of computerized management information systems in Gaza Electricity Distribution Company which attributable to gender variable, there exist a significant relationship between perceptions of the respondents for each of the resources (physical, software, and human) for computerized management information systems attributed to variable (age), there are no significant differences in the fields of (organizational resources) for computerized management information systems and (development of performance) attributable to variable (age) and that can be explained by the fact that the senior management deals with job titles not with age, there are significant differences between the perceptions of the respondents for each of the fields of resources (physical, software, and organizational) for computerized management information systems attributed to variable (educational qualification), the presence of a statistically significant differences between the perceptions of the respondents for each of the fields of "organizational resources for demographic variables among users of computerized management information systems " and ”development of performance” due to the variable (years of service), there is no statistically significant differences between respondents' perceptions about the fields of resources (physical, software, and human) for computerized management information systems attributed to variable (years of service). The study recommended the following: The need to strengthen the company's management interest in the use of computerized management information systems in all the systems components and elements as being an important variable which contributes to the development of performance. Strengthening the relationship between the users of information system and personnel systems in the department responsible for the system so that employees understand the technological and technical information needed by all users of information systems. It is essential that the company develop the infrastructure for information technology in general, and computerized management information systems, in particular for the development of performance. Increasing attention to provide material resources of equipment and devices used in the computerized management information system, and the interest in providing technical resources for management information systems keeping pace with technological means and modern techniques and work on the training of personnel to use those systems. Greater attention to human resource computerized management information systems “specialized technicians and end-users" through a variety of disciplines working in the field of computerized management information systems. The current study is unique by the virtue of its nature, scope and way of implied investigation, as it is the first study at Gaza Electricity Distribution Company resources explores the status of demographic variables among users of computerized management information systems and their relationship to the development of performance in Gaza Electricity Distribution Company increasing interest in Computerized management information systems through continuity, keeping pace with technological means and modern techniques. (shrink)

This thesis focuses on the use of intelligent tutoring system for education and training of students specialized in electricity in the field of technical and vocational education. The use of modern systems in training and education will have a great positive impact in improving the level of students receiving training and education; this will improve the level of the local economy by producing students of professionals who are able to engage in society efficiently, especially for those who have specialized in (...) electricity. It is known that students in electrical specialties face many problems because of time and cost. Learning and training is not as easy as you imagine, so intelligence is how to overcome these limitations effectively. Motivating the Intelligent Tutorial System (ITS) for this type of training. This system consists of a student model, which in turn will contain lessons, exercises and examples that will be used by the student in addition to the user interface model which makes the teacher to be able to manage lessons, examples, and questions and make changes to the system. Expert System (ES) model representing the Artificial Intelligence (AI) here has been used to determine the level of the student and gives him the results, directions and levels. The program was implemented and was used by trainees to show the extent of its impact. The students expressed their surprise and admiration in this way of education as the system used focuses on individual education which can be used at any time and without restrictions. After this experience, the dedicated (ITS) system needs to be developed in several ways such as to be used on mobile systems and web systems in addition to linking some of the specialized programs in the field of electricity. (shrink)

It is argued that logic, and in particular mathematical logic, should play a key role in the undergraduate curriculum for students in the computing fields, which include electrical engineering (EE), computer engineering (CE), and computer science (CS). This is based on 1) the history of the field of computing and its close ties with logic, 2) empirical results showing that students with better logical thinking skills perform better in tasks such as programming and mathematics, and 3) the skills students (...) are expected to have in the job market. Further, the authors believe teaching logic to students explicitly will improve student retention, especially involving underrepresented minorities in STEM, whose rate of attrition is higher than for non-minority students. Though this work focuses specifically on the computing fields, these results demonstrate the importance of logic education to STEM (science, technology, engineering, and mathematics) as a whole. (shrink)

This paper aims to identify computerized management information systems resources and their relationship to the development of performance in the Electricity Distribution Company in Gaza. This research used two dimensions. The first dimension is computerized management information systems and the second dimension the Development of Performance. The control sample was (063). (360) questioners were distributed and (306) were retrieved back with a percentage of (85%). Several statistical tools were used for data analysis and hypotheses testing, including reliability correlation using Cronbach’s (...) alpha, “ANOVA”, Simple Linear Regression and Step Wise Regression. The overall findings of the current study suggested the presence of a statistically significant relationship between resources (physical, software, and human and organizational) for the computerized management information systems and the development of performance in the Electricity Distribution Company in Gaza. The study recommended the following: The need to strengthen the company's management interest in the potential of computerized management information systems and using them in the computerization of all the company's activities. And the need to involve workers and users in the design of computerized management information systems and assessment and development process. And strengthen the relationship between users and information systems personnel in the department responsible for the system. And it is essential that the company is developing the infrastructure for information technology in general, and computerized management information systems, in particular for the development of performance. And increase interest in providing resources (physical, software, and human and organizational) for the computerized management information systems. The current study is unique by the virtue of its nature, scope and way of implied investigation, as it is the first study at Electricity Distribution Company in Gaza resources explores the status of Computerized management information systems and their relationship to the development of performance in the Electricity Distribution Company in Gaza increasing interest in Computerized management information systems through continuity, keeping pace with technological means and modern techniques. (shrink)

With the rapid development of information technology, the electricity consumption of Internet Data Centers (IDCs) increases drastically, resulting in considerable carbon emissions that need to be reduced urgently. In addition to the introduction of Renewable Energy Sources (RES), the joint use of the spatial migration capacity of IDC workload and the temporal flexibility of the demand of Electric Vehicle Charging Stations (EVCSs) provides an important means to change the carbon footprint of the IDC. In this paper, a sustainability improvement strategy (...) for the IDC carbon emission reduction was developed by coordinating the spatial-temporal dispatch flexibilities of the IDC workload and the EVCS demand. Based on the Minkowski sum algorithm, a generalized flexible load model of the EVCSs, considering traffic flow and Road Impedance (RI) was formulated. The case studies show that the proposed method can effectively increase the renewable energy consumption, reduce the overall carbon emissions of multi-IDCs, reduce the energy cost of the DCO, and utilize the EV dispatching potential. Discussions are also provided on the relationship between workload processing time delay and the renewable energy consumption rate. (shrink)

As hybrid electric vehicles (HEVs) gain prominence in the automotive industry, managing the heat generated by their electric motors and batteries has become a critical challenge. The performance, safety, and longevity of HEV components, such as batteries and motors, are significantly affected by thermal conditions. This paper proposes a modular liquid cooling system designed to efficiently manage heat dissipation in hybrid electric vehicle motors and batteries. The system leverages advanced fluid dynamics and thermoelectric materials to achieve optimal thermal control while (...) maintaining energy efficiency. The modular design allows for flexibility, enabling the cooling system to be adapted for different configurations of electric motors and battery modules. This adaptability ensures that the cooling system can cater to various HEV architectures without extensive redesign. The liquid cooling system is composed of multiple channels that distribute coolant uniformly across the critical components, preventing hotspots and ensuring stable operating temperatures. The system is equipped with sensors and control units to monitor and regulate temperature levels in real time, enhancing system reliability. (shrink)

As hybrid electric vehicles (HEVs) continue to rise in popularity due to their potential to reduce carbon emissions and increase fuel efficiency, the efficient management of battery thermal behavior has become an essential concern. Batteries in HEVs experience substantial heat generation during operation, which can lead to performance degradation, shortened lifespan, and safety hazards such as thermal runaway. Traditional cooling methods, such as air or liquid cooling, often fail to provide sufficient heat dissipation, especially under high load conditions.

In the film classic Blade Runner, the story explores the notion of personal identity through that of carefully crafted androids. Can an android have a personality; can androids be persons? The title of the original story by Philip K. Dick is Do Androids Dream of Electric Sheep? The story suggests that our sense of being a person depends on our having memories that connect us with our childhood. In the movie, the androids are only a couple of years old, but (...) have adult bodies. To complete them as persons they are given simulated memories of childhood. Some psychiatrists have decided that even humans dream only of electric sheep. I explore how Popper’s world 3 can help to defend a notion of personhood that can be used to criticize the thesis that persons are simply complex physical processes and that all their serious life-problems can be conceptualised as a form of physical illness. (shrink)

Hybrid Electric Vehicles (HEVs) are rapidly gaining popularity due to their potential to reduce greenhouse gas emissions and fuel consumption. However, the high-power density of HEV motors and batteries generates substantial heat during operation, which, if not effectively managed, can reduce system efficiency and shorten component lifespans. Efficient thermal management is critical for ensuring the optimal performance of HEV powertrains, specifically motors and batteries. Liquid cooling systems, with their superior heat transfer capabilities, have emerged as an effective solution for managing (...) the thermal loads in HEV systems. (shrink)

The literature on the history of electricity production have studied the evolution of electricity in both developed and developing countries and its impact on their economies. Some have laid foundations upon which other works are carried out. A close examination of historiography and multidisciplinary research on electricity production in Ghana shows that more efforts are required to improve the electric power landscape in Ghana. From the colonial era, the increasing demand for electricity has been the biggest challenge plaguing the energy (...) sector. Respective governments have made significant strides in ensuring reliable and universal access to electricity throughout Ghana, yet such efforts have been accompanied by different levels of challenges. The study uses a qualitative and exploratory research approach to trace the activities that helped, in many other ways to the creation of a sustainable electric power provision to household and industry in Ghana, particularly in two of Ghana’s cities; Accra and Kumasi, within the period 1900 to the1960s. The work focused mainly on archival sources in its quest to arrive at how indigenous Ghanaians provided power for industrial activities and for household purposes. Results from the study show that local and cottage industries relied predominantly on wood, fuel, and biomass for their operations even before the introduction of the more sophisticated means of power generation. Also, the study revealed that in finding solutions to the challenges of electricity production, policymakers have focused more on current issues with little or no effort to trace the historical foundation of electricity production. This notwithstanding, the little efforts that have been made examined the history of energy production, with a limited focus on the immediate post-independence era. (shrink)

The use of AFM for scanning probe lithography also suffers from power-related problems, but it is better suited than STM for this task due to the less stringent requirements of the technique: no very high vacuum conditions. , conductive surface or very good tip-to-sample distance control is required. Scanning probe nanolithography based on AFM can be performed through different mechanisms and offers a wide range of possibilities . Therefore, the AFM tip can produce localized changes in the composition, height, or (...) physical/chemical properties of surfaces through thermal effects, mechanical effects, deposition, chemical effects, etc. The principle of this technique for making electronic nano devices has been drawn and the example of making Si nanowires based on the oxidation of nanolithography probe Scanning is done. A derived technique that has become very popular is dip-pen nanolithography, in which the tip deposits specific inks with excellent clarity at desired locations. -/- . (shrink)