Magnetic water is generally water that passes through a magnetic field created based on specific calculations, and therefore the water changes, improving its physical and chemical properties. Magnetic system can treat water salinity.

nanological gates, in order to design nano-scale computers with dual-scale capabilities. All living biological systems function due to the molecular interactions of different subsystems. Molecular components (proteins and nucleic acids, lipids and carbohydrates, DNA and RNA) can be used as an inspirational strategy on how to design high-performance NEMS and MEMS that have the required features and characteristics. Considered. In addition, analytical and numerical methods are available for dynamic analysis and three-dimensional geometry, bonding and other properties of atoms (...) and molecules. Thus, electromagnetic and mechanical, and other physical and chemical properties can be studied. Nanostructures and nanosystems can be widely used in medicine and health. Possible applications of nanotechnology include: drug synthesis and drug delivery (therapeutic potential is greatly increased due to the effective direct delivery of new types of drugs to specific sites in the body), nanosurgery and nanotherapy Synthesis and detection of genomes, nano-scale stimuli and sensors (diagnosis and prevention of disease), design and implantation of non-rejection artificial organs and design of high performance nanomaterials. It is important that these technologies change the manufacture of materials, devices and systems. (shrink)

Nanoparticles can also be used as catalysts due to their high surface area. Of course, catalytic properties also occur in certain dimensions like magnetic properties. In other words, nanoparticles usually have catalytic properties if their specific surface is between 100 and 400 square meters per gram. Therefore, among nanoparticles with a specific volume, a nanoparticle with a larger surface area shows better catalytic properties. An example of nanoparticles that act as catalysts where various substances are placed on their surface and (...) chemical reactions are carried out. Apart from the mentioned cases, nanoparticles have many other applications in various medical industries (drug delivery, etc.), automobiles (anti-fogging windows, lightening the body, strengthening tires), electronics (making transistors), etc. The strength of carbon-carbon bonds gives carbon nanotubes amazing electronic properties. No previous material exhibits the extraordinary combination of mechanical, thermal and electronic properties attributed to them . However, their conductivity is what sets them apart. Multi-layered carbon nanotubes are the strongest materials that mankind has discovered so far in terms of electronic conductivity. The highest tensile strength or breaking strain for a carbon nanotube was up to 63 GPa, which is about 50 times more than the strongest conductors. Even the weakest types of multi-layered carbon nanotubes have multifold power in electronic conduction. These properties, along with the lightness of carbon nanotubes, give them great potential in applications such as aerospace. The electronic properties of the wall of carbon nanotubes are also extraordinary. It has high electrical conductivity (comparable to copper). It is particularly noteworthy that nanotubes can be metallic or semiconducting. The rolling action breaks the symmetry of the planar system and imposes a specific direction with respect to the hexagonal grid and the axial direction. Depending on the relationship between these axial directions and the unit vectors that describe the hexagonal lattice, nanotubes may behave electrically like metals or semiconductors , with some nanotubes having higher conductivity than copper, while Others behave more like silicon . And there are possibilities of making nano electronic devices from multi-layer nanotubes of CNTs. (shrink)

The use of AFM for scanning probe lithography also suffers from power-related problems, but it is better suited than STM for this task due to the less stringent requirements of the technique: no very high vacuum conditions. , conductive surface or very good tip-to-sample distance control is required. Scanning probe nanolithography based on AFM can be performed through different mechanisms and offers a wide range of possibilities . Therefore, the AFM tip can produce localized changes in the composition, height, or (...) physical/chemical properties of surfaces through thermal effects, mechanical effects, deposition, chemical effects, etc. The principle of this technique for making electronic nano devices has been drawn and the example of making Si nanowires based on the oxidation of nanolithography probe Scanning is done. A derived technique that has become very popular is dip-pen nanolithography, in which the tip deposits specific inks with excellent clarity at desired locations. -/- . (shrink)

Nowadays, many semiconductors such as silicon are used in a wide range of nanoelectronic devices. However, due to the range of thermal changes and its extremely high speed, nano diamond is only compared to gold nanoparticles, which is the second best nano semiconductor in the world. Nano graphite and graphene nano strips are electrically conductive due to cloud scattering. Active nano diamond particles with such features, especially electronic ones, can be the foundation of completely new (...) types of powerful nano electronic devices. (shrink)

based on organic materials can be mechanically exible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make exibility impossible in them. Makes. Properties such as strength, exibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties of the (...) material by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

Signal measurement Electrochemical methods are very suitable for detecting direct DNA oxidation because electrochemical reactions directly generate electronic signals and therefore do not require expensive converters. In addition, in this process, because the order of the immobilized game can be limited to onlya series of electrode substrates, the act of tracking is performed by a series of in expensive electrochemical analyzes. Electrochemical sensors are used to perform clinical or environmental tests; The basis of the sensitivity of electrochemical signals to direct (...) oxidation orinterval catalysis of DNA is also based on the reduction reactions of reporter molecules or enzymes. (shrink)

Note: In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. -/- The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can (...) be 100 times lower than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

MEMS is a structural technology, an example of the design and development of sophisticated, well integrated electronics systems and mechanical devices utilizing single-stage manufacturing techniques . Techniques for making the MEMS enables the components and equipment with performance and increased production are combined with the advantages of the ordinary, such as reducing the size of the physical volume, weight and cost and providing a basis for the production of non-manufacturing methods, the other is the reality of internal order Technology (...) MEMS and its micro-machining techniques are well versed in its application to an unprecedented range of MEMS devices over previous dependent fields (for example Biology and Microelectronics) These agents make MEMS far more comprehensive than IC microchips technology . (shrink)

The development of machine learning and deep learning (DL) in the field of AI (artificial intelligence) is the direct result of the advancement of nano-electronics. Machine learning is a function that provides the system with the capacity to learn from data without being programmed explicitly. It is basically a mathematical and probabilistic model. DL is part of machine learning methods based on artificial neural networks, simply called neural networks (NNs), as they are inspired by the biological NNs that constitute (...) organic brains. Despite its similarity to biological organs such as human brains, major problems arise in trying to attribute moral responsibility to autonomic systems based on hardware including nano-electronic devices, which are sought to replace humans (moral agents) in the context of AI. It is suggested that the required emotional environment which enables actions according to reasons in humans is not witnessed at AI devices. Though AI technology raises an enticing resemblance to human actions, this resemblance is to be considered with a skeptical eye. It is because actions are associated with reasons while causes are connected to operations. Human agents are capable of acting upon their reasons, while AI devices are limited only to operations as they are conditioned by their programming, which is considered as an embodiment of some causes. As moral responsibility goes hand in hand with the capacity to act (according to reasons), attributing moral responsibility to AI devices is revealed to be but a misleading metaphor. (shrink)

Production of nano supercapacitors using nanoparticles that can be polarized so that electrical energy can be stored. Nanostructure multilayer technology (solid state) is a known dielectric material used in nano supercapacitors because it is a piezoelectric and ferroelectric material. In this work, by creating passive filters, they provide storage between different types of these electric nano layers. The degree of electrical properties in solid materials (nanosupercapacitors) is very diverse. Based on the amount of resistance (nano supercapacitors) (...) against the passage of electric current, different materials can be divided into categories classified as conductor, semiconductor, and insulator. Meanwhile, in superconductors, there is a different mechanism to guide electrons. (Nano supercapacitors) can be defined as the number of free electrons that move freely in the material under the influence of an external electric field, as well as mobility, which is a measure of the ability and speed of free electrons to move, attributed. (shrink)

Nanowires ( SiNWs) have high mobility and surface-to-volume ratio, which makes them easy to control using a weak electric field. These one-dimensional nanostructures are created from nanowires with a diameter in the range of nanometers and a length of more than a micrometer. It has been done in the manufacture of nanowires through regular one-dimensional arrays with the help of different physical and chemical methods. Methods such as the use of electron beam or lithography method, heavy ion (...) irradiation, laser, chemical and electrochemical methods such as water heat and spontaneous assembly methods used to make the membranes of molds can also be used . In making one-dimensional nanostructures such as Oligophenylene vanillin nanowires The electro-accumulation method consists of three general steps: firstly, the creation of a porous template as a suitable substrate and framework for the accumulation of nanowires, secondly, the growth of nanowires along the cavities of the template, and thirdly, removing the template and separating the nanowires from it. The nanowires are directly dependent on the characteristics of the mold surface such as the size distribution of the holes, the density of the holes and the superiority of the surface of the nano-holes. In order to control the properties of Oligophenylene vanillin nanowires, parameters that are effective in the formation and optimization of the diameter of the holes and the thickness of the mold should be considered. (shrink)

The division is based on the wavelength of the output beam and the wave- length of the output beam of the wide range nano laser. According to this and the wavelength, the types of nano lasers include infrared, visible and ultraviolet lasers, for example, the nano laser produces a beam with a wavelength of about 858.32 X-rays, the wavelength of a solid nano laser is between 9.6 and 10.6 It is a microme- ter. This is because (...) the wavelength of liquid lasers are in the infrared and ultraviolet regions, respectively. (shrink)

All electrochemical nano biosensors that have a molecular base depend on a very specific system to detect or track their target molecule. The importance of an electrochemical nanobiosensor is to provide a suitable support for connecting the target molecule to the probe and creating an electrical signal that can be measured and read.

In a nMOS graphene field effect transistor, the resistance between two electrodes can be transferred or controlled by a third electrode. In a multilayer graphene field effect nMOS transistor, the current between the two electrodes is controlled by the electric field from the third electrode. Unlike the bipolar transistor, it is capacitively connected to the third electrode and is not in contact with the semiconductor. Three electrodes in the structure of the nMOS graphene field effect transistor are connected to the (...) source, drain and gate, and this action increases the switching speed (doping) in the nMOS graphene transistor circuit. (shrink)

Note: Nanoelectronics technology has dedicated some very exciting materials to improve the sensing phenomenon. The use of various nanomaterials, including nanoparticles, nanotubes, nanotubes, and nanowires, causes faster identification and reproducibility in a much better way. The unique properties of nanomaterials such as high electrical conductivity, better shock tolerance, and sensitive responses such as versatile piezo-electric and color detection mechanisms are only results of the multitude of properties of nanomaterials. Different types of biosensors are propagated based on different types (...) of nano materials and their developmental and implicit aspects. Measurement of biological responses has assumed great importance in the current scenario of ever-dynamic environmental developments and altered hemostatic events occurring at the in vivo as well as intracorporeal level. Analyzing the behavior of changing materials is of great importance in areas such as pharmaceutical diagnostics, food quality screening, and environmental applications. (shrink)

Note: NI_nanoparticle nickel nanoparticles is a strong conductor of electric current and its surface is shiny and polished. This element belongs to the group of iron and cobalt elementsUsing particles from the microscale to the nanoscale provides benefits for various scientific fields, but because a large percentage of their atoms is on the surface, nanomaterials can be highly reactive and pose risks. have a potential for humans. Nanoparticles are of great interest due to their wide application, both in industry and (...) in the natural sciences. While natural materials have constant physical properties regardless of size, the size of a nanoparticle determines its physical and chemical properties. Therefore, the properties of a material change as its size approaches the nanoscale and the percentage of atoms on the surface of the material becomes significant. The important feature of all nano structures is that in which the number of surface atoms is more than the number of volume atoms. This ratio increases with decreasing nanoparticle size. Therefore, the size of the nanoparticle is considered its most important feature. The range of activity of nanoparticles depends on the nature and shape of the nanostructure. However, if the energy of the nanoparticle field is comparable to the energy of electromagnetic radiation and if in a certain range a wavelength with the occurrence of chemical reactions in materials Under irradiation, significant changes will be made in the activity of nanoparticles up to 100 nm in size. is the nanometer expected to be used for storage. Given the relatively large (physically speaking) storage devices we have now and the fact that we need gigabyte sizes in various areas, there is a high potential for activity in this There is a context. Each quantum dot consists of a discrete ball of several hundred atoms that can have one of two magnetic states. This allows them to contain a single bit of information (zero or one), as is customary in machine computing. In conventional hard disks, the data bits must be spaced far enough apart that they do not overlap. Quantum dots act as completely independent units that are not structurally connected, so they can become somewhat closer to each other. One of the new information storage tools is the use of nickel quantum dots in nanometer sizes, which are expected to be used to store terabytes of data. (shrink)

Fullerenes are among the materials that many nano materials are based on. Their unique structural and electronic properties, as well as their use in various fields such as electronic applications such as making nano electrodes used in special electrical circuits , nano photonics in nano solar cells and nano absorbers of specific wavelengths. Layers of nanotubes can behave like a metal and be electrically angled. Changing the structure and building in them can show the characteristics (...) of semiconductors. or be non-conductive. For example, a slight change in the helix can change the tube from a metal to a wide-gap semiconductor. -/- . (shrink)

In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can be 100 (...) times lower than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

Note: Many types of nanosensors are designed using CP nanomaterials for nanobiological applications. (Conductive surface) The oxidation of conductive polymeric materials is easily altered by redox mechanisms, and the charge transfer properties of these materials are affected by structural parameters, such as diameter and dimensions. CP materials are able to provide sensitive and rapid responses to specific biological and chemical species. Techniques such as chemical polymerization are often used to make CP nanomaterials. Manufacturing strategies can be divided into three categories: (...) hard mold synthesis, soft mold synthesis, and mold-free synthesis. The most widely used conductive polymers in nanosensors are nanomaterials made from CP due to their unique chemical and electrical properties resulting from the properties of their pie-electron nanosystem. Many modeling and functionalization technologies are being developed to control the location, distribution, amount, or structure and orientation of biological nanomolecules at the nanomaterial level. Therefore, our level of contact between biological nanomolecules and nanomaterials is of particular importance in countless applications. Covalent and non-covalent modifications are two general methods for coupling biological molecules and CP nanomaterials. Covalent functionalization is a chemical process in which a strong bond or relationship between nanomaterials and biological molecules is formed. In many cases, surface chemical modifications are required to create active groups that can bind to biomolecules. Unlike covalent functionalization, in the non-covalent method, nanomolecules can be removed without destroying the geometric and electronic structure on the surface. Nanomaterials are formed. Conclusion : The large surface-to-volume ratio in nanostructures and the high potential for signal amplification provide ideal conditions for marking and detecting biological elements in the structure of nanosensors. (shrink)

Devices based on organic materials can be mechanically flexible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make flexibility impossible in them. Makes. Properties such as strength, flexibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties of (...) the material by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

Graphene nanomemories have been developed molecularly, providing excellent programmable nanoscale memory performance compared to previous graphene memory devices and a memory window. Large (12V), fast switching speed (1 microsecond), shows strong electrical reliability. Graphene molecular nanomemories show unique electronic properties, and their small dimensions, structural strength, and high performance make them a charge storage medium for Nano memory applications. We use a set of techniques involving a solution of nanoparticles, which creates a very thin layer on the target substrate (...) and is used as a sacrificial layer during the nanopatterning process. (shrink)

Human consciousness, the result of breathing process as dealt with in the Upanishads, is translated into modern scientific terms and modeled as a mechanical oscillator of infrasonic frequency. The bio-mechanic oscillator is also proposed as the source of psychic energy. This is further advanced to get an insight of human consciousness (the being of mind) and functions of mind (the becoming of mind) in terms of psychic energy and reversible transformation of its virtual reflection. An alternative analytical insight of human (...) consciousness and mental functions to other theoretical approaches is developed based on Upanishadic insight and presented.That reversible transformation of virtual psychic energy reflection termed as maya, creating various consequential / parallel / simultaneous conscious-states, phases, cognitive and communicative states, modes of language acquisition and communication, and kinds of function of human mind is visualized. The concept is extended to delineate form, structure and functional mechanism of human mind and to know how it facilitates human mental acquisitions, retention, communications, including language abilities. This proposal is extensively discussed and the hardware and software of mind as envisaged in Indian philosophical systems are put forward.All this presentation is translated to neuro-biology in terms of brain wave modulation / demodulation terms. Also a preliminary proposition of physic-chemical nature of human thoughts and ideas is given. (shrink)

An increase in the surface-to- volume ratio and changes in geometry and electronic structure have a strong impact on the chemical interactions of matter, and for example, the activity of small particles changes with changes in the number of atoms (and thus the size of the particles). Unlike today's nano-transistors, which behave based on the movement of a mass of electrons in matter, new devices follow the phenomena of quantum mechanics at the nano scale, in which the discrete (...) nature of electrons cannot be ignored. By reducing all the horizontal and vertical dimensions of the transistor, the electric charge density increases in different areas of the nano-transistor , or in other words, the number of electric charges per unit area of the nano-transistor increases. (shrink)

The aim of the research is to identify the role of policies and procedures for the electronic document management system in the success of the electronic document management system in the Palestinian Pension Agency. In order to achieve the objectives of the study, the researchers used the analytical descriptive method in which the tries to describe the phenomenon studied, analyze its data, the relationship between its components and the opinions that are raised around it, and use the comprehensive inventory method (...) due to the small size of the society. (108) questionnaires were distributed to the community of 65 employees in Gaza Strip and 43 employees in the West Bank. All the responses were retrieved. The research found that there is a clear adoption by the Commission of the policies and procedures put in place to implement the electronic management system of electronic documents. The study showed that there are no statistically significant differences between the responses of the study population regarding the role of policies and procedures for the electronic document management system in the success of the electronic document management system in the Palestinian Pension Agency due to variable (age, nature of job, specialization). And showed that there is a fundamental difference in the opinion of members of the study community on the role of policies and procedures for the electronic document management system in the success of the electronic document management system in the Palestinian Pension Agency attributed to the scientific qualification, and shows the difference in favor of the bachelor's degree. And years of service, and shows the difference in favor of the 11-15 year category. The research led to a number of recommendations, the most important of which is the increase of interest and awareness of the need to implement policies and procedures to ensure the success of the electronic document management system through access to and benefit from the experiences of other institutions and the private sector. And the need to focus on the attention to develop appropriate and clear plans and dissemination on the electronic document management system and specific to specific objectives and the Commission is committed to apply them, the need to pay attention to the development of strategic plans and policies and work mechanisms commensurate with the electronic document management system, and the need to define a policy in advance to form a team of different specialties of the staff of the Authority and cooperation with consultants from outside the body to work on the electronic document system. (shrink)

This capstone is centered around the development of an efficient electronic property inventory system tailored for school assets, driven by the overarching objective of resource optimization to ensure equitable access to vital materials for all learners. The methodology follows the “ISSO” framework (Ignite, Strategize, Systematize, Operationalize), complemented by a Logical Framework. The project employs a homegrown digitalized system constructed through a waterfall model approach, which undergoes alpha and beta testing. The study’s analysis utilizes a t-Test to evaluate its impact. The (...) outcomes reveal that real-time property monitoring significantly enhances custodianship, while digitalization yields improvements in reliability, efficiency, and usability, effectively overhauling the conventional inventory process. The electronic system fosters stakeholder engagement, supporting communication, budget allocation, and audits. Comparative testing demonstrates clear advantages over traditional manual methods. In conclusion, this study underscores the merits of a refined electronic property inventory system. Notably, the research suggests a need for careful consideration of process complexities in outsourcing decisions and showcases the swift, precise, and transparent accounting provided by e-AIMSS deployments, thereby nurturing transparency and public confidence. This innovative approach holds promise for broader application within the realm of e-government processes. (shrink)

There is growing interest in the use of technology to enhance the tracking and quality of clinical information available for patients in disaster settings. This paper describes the design and evaluation of the Wireless Internet Information System for Medical Response in Disasters (WIISARD).

The use of wireless, electronic, medical records and communications in the prehospital and disaster field is increasing. Objective: This study examines the role of wireless, electronic, medical records and com- munications technologies on the quality of patient documentation by emergency field responders during a mass-casualty exercise.

The study aims to identify the reality of management of electronic documents and electronic archiving retirement in the Palestinian Pension Agency -analytical study, as well as to recognize the reality of the current document management system in the Palestinian Pension Agency. The study found the following results: that the reality of the current system for the management of documents in the agency is weak and suffers from many jams. Employee in the agency understand the importance and benefits of the management (...) of electronic documents system, where the application of electronic document management system provide important features and benefits most of which reduce the loss of documents between departments, illustrates the flow path, the speed, accuracy, transparency, and reduce the proportion of damage and destruction of files. Furthermore, the electronic documents system cost will be less than the cost of the current system and it will reduce the tasks assigned for the staff. The existence of a clear adoption of the agency for the policies and procedures established for the application of electronic documents management system. There are weak plans for training and developing of staff in the agency to raise their efficiency. The study found a set of recommendations, including: increased interest and awareness of the need to implement policies, mechanisms, and procedures to ensure the success of electronic document management system through benefiting from the experiences of other organizations and the private sector. The agency need to increase and develop its services for retirees in order to encourage the private sector, universities, and institutions to join the agency, and open the way for all segments of society in Gaza and West Bank and enhance its competitiveness between international social security institutions. The need to focus its attention on developing and publishing appropriate clear plans and specific goals about management of electronic documents and the agency should be committed to apply them. The need to focus on the establishment of a public management of archiving in the structure dealing with all technical operations and having competent and qualified employees in the field of electronic document management. The need to focus on the Palestinian National Archives and the follow-up with the international standards by the International Council Archives (ICA). (shrink)

The concepts developed using Upanishadic insight regarding human consciousness, mind and mental processes and their applications in information acquisition and transmission by, through and in human body will be used to model human cognitive processes. A sequential reversible process by the stepwise transformation of (i) infrasonic form of energy and transformation of information already stored in (ii) biochemical form within as memory, and retrieved as inner mental world into (iii) electrochemical and then into (iv) mechanical form while communicating and the (...) reverse of it as the (i) input stimuli from outside world as light, sound, chemical, mechanical and heat forms, into (ii) electrochemical, (iii) biochemical and finally into (iv) infra sonic form while acquiring and understanding processes is put forward and discussed. Comparisons will be made between energy transformations in electronics communication processes and these psychic energy transformations that give rise to cognitive processes. This comparison gives an insight and theory of origin, structure, function and cessation of human mental functions. A comparative diagram that describes application of infrasonic energy transformations associated with bionics as biochemical, electrochemical and mechanical forms will be given. (shrink)

The recent advent of high-resolution imaging and force spectroscopy using atomic force mi- croscopy (AFM) in organic and inorganic solutions opens the way to imaging a wide variety of surfaces and their solvent structure. However, to take full advantage of the high resolution and provide signicant new analytical capability, a detailed understanding of the background contrast mechanisms that lead to atomic and molecular resolution is critical. Without a theory that connects the measured force to atomic models of the surface and (...) tip of the microscope, the information that can be distilled from these measurements is limited. Molecular dynamics simulations show that the forces acting on the microscope tip result from the direct interaction between a tip and a surface and are entirely due to the structure of water around the tip and surface. (shrink)

The practice of using the term “electronic governance” does not differentiate the concepts of the subject of management, that is, the three branches of government, with forms, processes and technologies of governance, which is not correct, since the use of information technology in state activities is not a top priority. On the other hand, electronic governance technologies cannot be considered separately from the automated governance processes as well as electronic governance technologies are not a supplement or an analogue of the (...) traditional state, as intended to communicate by means of electronic governance technologies to increase the efficiency of the entire system of public administration, in particular in the system of administrative services. (shrink)

Scientific models share one central characteristic with fiction: their relation to the physical world is ambiguous. It is often unclear whether an element in a model represents something in the world or presents an artifact of model building. Fiction, too, can resemble our world to varying degrees. However, we assign a different epistemic function to scientific representations. As artifacts of human activity, how are scientific representations allowing us to make inferences about real phenomena? In reply to this concern, philosophers of (...) science have started analyzing scientific representations in terms of fictionalization strategies. Many arguments center on a dyadic relation between the model and its target system, focusing on structural resemblances and “as if” scenarios. This chapter provides a different approach. It looks more closely at model building to analyze the interpretative strategies dealing with the representational limits of models. How do we interpret ambiguous elements in models? Moreover, how do we determine the validity of model-based inferences to information that is not an explicit part of a representational structure? I argue that the problem of ambiguous inference emerges from two features of representations, namely their hybridity and incompleteness. To distinguish between fictional and non-fictional elements in scientific models my suggestion is to look at the integrative strategies that link a particular model to other methods in an ongoing research context. To exemplify this idea, I examine protein modeling through X-ray crystallography as a pivotal method in biochemistry. (shrink)

In the last two decades we have witnessed considerable efforts directed towards making electronic healthcare records comparable and interoperable through advances in record architectures and (bio)medical terminologies and coding systems. Deep semantic issues in general, and ontology in particular, have received some interest from the research communities. However, with the exception of work on so-called ‘controlled vocabularies’, ontology has thus far played little role in work on standardization. The prime focus has been rather the rapid population of terminologies at (...) the level of fine detail. In this paper, we argue that more efforts are needed on the side of both research and standardization to ensure that the coding systems used in electronic healthcare records enjoy a semantics that is coherent with the semantics of the record. We propose realist ontology as a method to bring about this coherence by means of a robust system of top-level ontological categories. (shrink)

Today, the need for primary and secondary energies is always increasing to meet the energy needs of mankind. In recent years, solar cells have been used as an alternative to produce renewable, sustainable, and pollution-free energy. Various materials have been used as the transfer layer in cells. TIO2 is one of these materials that has been widely used as the electron transfer layer, but currently, ZnO is another significant material. is more recently used than TIO2. Also, perovskite solar cells are (...) the new generation of solar cells that belong to the nano family. Currently, perovskite solar cells (PSC) as a promising cell in the electronics industry, due to the high-power conversion efficiency, as well as the relatively lower cost of manufacturing a silicon solar cell, and such high flexibility that leads to the use of Perovskite is on different types of substrates. Also, the use of graphene as the most important fundamental photovoltaic material for photovoltaic energy conversion has emerged and been used. Graphene is used as a transparent electrode, as an active layer between layers, as an electron and hole transfer layer, or as an electron and hole separator layer in the construction of solar cells. In this article, the goal is to find the best structure with the highest power conversion efficiency in solar cells, and we will see further that by using perovskite, ZnO, and graphene, we will achieve a power conversion efficiency of 16% with a low manufacturing cost. (shrink)

In this paper a Knowledge-Based System (KBS) for determining the appropriate students major according to his/her preferences for sophomore student enrolled in the Faculty of Engineering and Information Technology in Al-Azhar University of Gaza was developed and tested. A set of predefined criterions that is taken into consideration before a sophomore student can select a major is outlined. Such criterion as high school score, score of subject such as Math I, Math II, Electrical Circuit I, and Electronics I taken during (...) the student freshman year, number of credits passed, student cumulative grade point average of freshman year, among others, were then used as input data to KBS. KBS was designed and developed using Simpler Level Five (SL5) Object expert system language. KBS was tested on three generation of sophomore students from the Faculty of Engineering and Information Technology of the Al-Azhar University, Gaza. The results of the evaluation show that the KBS is able to correctly determine the appropriate students major without errors. (shrink)

Electronic Health Records (EHRs) are organized around two kinds of statements: those reporting observations made, and those reporting acts performed. In neither case does the record involve any direct reference to what such statements are actually about. They record not: what is happening on the side of the patient, but rather: what is said about what is happening. While the need for a unique patient identifier is generally recognized, we argue that we should now move to an EHR regime in (...) which all clinically salient particulars – from the concrete disorder on the side of the patient and the body parts in which it occurs to the concrete treatments given – should be uniquely identified. This will allow us to achieve interoperability among different systems of records at the level where it really matters: in regard to what is happening in the real world. It will also allow us to keep track of particular disorders and of the effects of particular treatments in a precise and unambiguous way. We discuss the ontological and epistemological aspects of our claim and describe a scenario for implementation within EHR systems. (shrink)

The information regime is mediated by the culture of the electronic device. It is characterized by the control of the deluded citizen through the deployment of freedom, thereby nullifying the core issue of human life: freedom. Through phenomenological-hermeneutic methodology (Heidegger, 2002), this work starts from the world of digital life to direct the interpretation towards digital governance, all of which appears as a hermeneutic horizon the information regime. It is concluded that in this new social order the political and all (...) other orders that arise from interaction are governed by a capitalism of emotions. (shrink)

The monograph presents the ideas about the main changes that occurred in the development of technologies from the emergence of Homo sapiens till present time and outlines the prospects of their development in the next 30–60 years and in some respect until the end of the twenty-first century. What determines the transition of a society from one level of development to another? One of the most fundamental causes is the global technological transformations. Among all major technological breakthroughs in history the (...) most important are three production revolutions: 1) the Agrarian Revolution; 2) the Industrial Revolution; and 3) the Cybernetic one. The book introduces the theory of production revolutions which is a new valuable explanatory paradigm that analyzes causes and trends of dramatic shifts in historical process. The authors describe the course of technological transformations in history and demonstrate a possible application of the theory to explain the present and forthcoming technological changes. They analyze the technological shifts which took place in the second half of the twentieth and early twenty-first centuries and forecast the main shifts in the next half a century. On this basis the authors present a detailed analysis of the latest production revolution which is denoted as ‘Сybernetic’. They make some predictions about its development in the nearest five decades and up to the end of the twenty-first century and show that the development of various self-regulating systems will be the main trend of this revolution. The authors argue that the transition to the starting final phase of the Cybernetic Revolution (in the 2030–2040s) will first occur in the field of medicine (in some its innovative branches). In future we will deal with the started convergence of innovative technologies which will form the system of MANBRIC-technologies (i.e. the technological paradigm based on medicine, additive, nano- and bio- technologies, robotics, IT and cognitive technologies). The monograph gives an outline of the future breakthroughs in medicine and some other technologies (between the 2010s and 2070s). (shrink)

Plagiarism detection is the process of finding similarities on electronic based documents. Recently, this process is highly required because of the large number of available documents on the internet and the ability to copy and paste the text of relevant documents with simply Control+C and Control+V commands. The proposed solution is to investigate and develop an easy, fast, and multi-language support plagiarism detector with the easy of one click to detect the document plagiarism. This process will be done with the (...) support of intelligent system that can learn, change and adapt to the input document and make a cross-fast search for the content on the local repository and the online repository and link the content of the file with the matching content everywhere found. Furthermore, the supported document type that we will use is word, text and in some cases, the pdf files –where is the text can be extracting from them- and this made possible by using the DLL file from Word application that Microsoft provided on OS. The using of DLL will let us to not constrain on how to get the text from files; and will help us to apply the file on our Delphi project and walk throw our methodology and read the file word by word to grantee the best working scenarios for the calculation. In the result, this process will help in the uprising the documents quality and enhance the writer experience related to his work and will save the copyrights for the official writer of the documents by providing a new alternative tool for plagiarism detection problem for easy and fast use to the concerned Institutions for free. (shrink)

The study aimed to identify the role of administrative procedures and systems in enhancing the performance of the educational institutions in the Islamic University in Gaza. To achieve the research objectives, the researchers used the analytical descriptive approach to collect information. The researchers used the questionnaire distributed to three categories of employees at the Islamic University (senior management, faculty members, their assistants and members of the administrative board). A random sample of 314 employees was selected and 276 questionnaires were (...) retrieved with a recovery rate of 88.1%. The Statistical Analysis Program (SPSS) was used to enter process and analyze data. The results of the research showed a positive role for the administrative procedures and systems in enhancing the performance of the Islamic University from the point of view of the members (senior management, teaching staff and their assistants and the administrative body), where the relative weight of all the paragraphs (73.728%). The analysis of the results revealed that the administrative procedures at the Islamic University in Gaza are used to an acceptable degree. The relative weight of all the paragraphs is 70%. This indicates a relationship between administrative procedures and regulations and the performance of the Islamic University in the Gaza Strip. The study found that there was a good degree of approval from the sample regarding the administrative procedures and their relationship to the job performance. There exist a sufficient degree of powers to the deans and department managers to carry out their tasks, with the use of plans as control tools. And that there are rules and procedures provided for decision-making in the University Council. It also has full powers to manage the university to improve the teaching and learning environment. The researchers also recommended a number of recommendations, including the need to follow up on the procedures and systems of management and update them continuously in the light of changes that may occur and to ensure the existence of a strong system of electronic information systems within the university. There is a need to provide mechanisms for obtaining information about the surrounding external environment, and effective mechanisms to provide managers with the necessary information in a timely manner. The importance of providing channels of communication that enables staff to communicate information about any violations and breaches. The study also recommended the follow-up, review, procedures and administrative systems, and work to modify them in line with the mission of the university and the objectives that the university seeks to reach. (shrink)

The Simulation Hypothesis proposes that all of reality, including the earth and the universe, is in fact an artificial simulation, analogous to a computer simulation, and as such our reality is an illusion. In this essay I describe a method for programming mass, length, time and charge (MLTA) as geometrical objects derived from the formula for a virtual electron; $f_e = 4\pi^2r^3$ ($r = 2^6 3 \pi^2 \alpha \Omega^5$) where the fine structure constant $\alpha$ = 137.03599... and $\Omega$ = 2.00713494... (...) are mathematical constants and the MLTA geometries are; M = (1), T = ($2\pi$), L = ($2\pi^2\Omega^2$), A = ($4\pi \Omega)^3/\alpha$. As objects they are independent of any set of units and also of any numbering system, terrestrial or alien. As the geometries are interrelated according to $f_e$, we can replace designations such as ($kg, m, s, A$) with a rule set; mass = $u^{15}$, length = $u^{-13}$, time = $u^{-30}$, ampere = $u^{3}$. The formula $f_e$ is unit-less ($u^0$) and combines these geometries in the following ratio M$^9$T$^{11}$/L$^{15}$ and (AL)$^3$/T, as such these ratio are unit-less. To translate MLTA to their respective SI Planck units requires an additional 2 unit-dependent scalars. We may thereby derive the CODATA 2014 physical constants via the 2 (fixed) mathematical constants ($\alpha, \Omega$), 2 dimensioned scalars and the rule set $u$. As all constants can be defined geometrically, the least precise constants ($G, h, e, m_e, k_B$...) can also be solved via the most precise ($c, \mu_0, R_\infty, \alpha$), numerical precision then limited by the precision of the fine structure constant $\alpha$. (shrink)

In the sea trade, the traditional paper-based bill of lading has played an important role across the globe for centuries, but with the advent of advanced commercial modes of transportation and communication, the central position of this document is under threat. The importance of the bill of lading still prevails as does the need of the functions that this document served in the past, although in a changed format. In the recent past, the world has witnessed a lot of debate (...) about replacing this traditional paper-based document with an electronic equivalent that exhibits all of its functions and characteristics, both commercial and legal. More specifically, unlike many rival travel documents, such as the Sea Waybill, a bill of lading has two prominent features, that is to say, its negotiability and its acceptability as a document of title in certain legal jurisdictions that are required to be retained in an electronic bill of lading so as to also retain the prominence of this document in the future landscape. This thesis is, however, more concerned about the legal aspects of adopting the electronic bill of lading as a traditional paper-based legal document as well as an effective legal document in the present age. However, the scope of this debate remains primarily focused on the USA and UK jurisdictions. In the course of this thesis, it is observed that, in the past, the bill of lading has been subject to a variety of international regimes, such as The Hague Rules and The Hague-Visby Rules, and presently efforts are being made to arrive at a universal agreement under the umbrella of The Rotterdam Rules, but such an agreement is yet to arrive among the comity of nations. On the other hand, efforts made by the business community to introduce an electronic bill of lading are much louder and more evident. The private efforts, such as the SeaDocs System, CMI Rules, and the BOLERO Project, etc., were, however, received by the fellow business community with both applause as well as suspicion. At the same time, there are a number of concerns voiced by the international business community on the legislative adoptability in national and international jurisdictions and the courts’ approach in adjudicating cases involving electronic transactions and these are making the task of adoption of electronic bill of lading in the sea-based transactions a difficult task. Therefore, in the absence of any formal legal backing from national and international legislations, these attempts could not achieve the desired results. In this thesis, the present situation of the acceptability of electronic transactions in general, and of the electronic bill of lading specifically, has also been discussed with reference to certain national jurisdictions, such as Australia, India, South Korea and China, in order to present comparative perspectives on the preparedness of these nations. On the regional level, the efforts made by the European Union have also been discussed to promote electronic transactions within its jurisdiction. All the discussion, however, leads to the situation where the level of acceptability of electronic bill of lading in the near future is found to be dependent upon the official efforts from the national governments and putting these efforts towards arriving at an agreement on Rotterdam Rules as early as possible. The other area of importance revealed in this thesis is the need for change in juristic approach by the courts while interpreting and adjudicating upon cases involving electronic transactions. On the whole, this thesis has provided a cohesive and systematic review, synthesis and analysis of the history of the bill of lading, its importance as a document of title, and attempts to incorporate its important functions within the fast-paced electronic shipping commerce of today. In such a way it has provided a valuable contribution to the literature by providing a comprehensive resource for jurists, policy-makers and the business community alike, as they work towards adapting the bill of lading so that it might be successfully applied in electronic form. (shrink)

Electrical and electronic devices are constantly present in human lives, as providing communication, entertainment or transportation. Ever increasing use of power electronics equipment and communication equipment in everyday life is increasing electromagnetic pollution day by day. This pollution may degrade the performance of electronic and electrical equipment. Any RF radiation emitting devices emit Electro Magnetic (EM) radiation and without proper shielding, the radiation could be harmful to humans and other biological elements. Modernization in new generation of mobile telecommunication system, with (...) enhanced bandwidth and power, the biological effects of electromagnetic radiation from these gadgets is a real concern to many It is necessary that all electronics equipment or systems must be constructed to ensure that any electromagnetic disturbance it generates must be constructed with inherent level of immunity to externally generated Electromagnetic disturbances. These needs to design the equipment known as TEM cell with symmetric open structure geometry to limit the amount of unwanted radiation, the shielding of critical parts, making equipment less immune to external interference. (shrink)

In the bitcoin whitepaper, Satoshi Nakamoto (2008: 2) defines an electronic coin as a chain of digital signatures. Many have since defined a bitcoin as a chain of digital signatures. This latter definition continues to appear in reports from central banks, advocacy centers, and governments, as well as in academic papers across the disciplines of law, economics, computer science, cryptography, management, and philosophy. Some have even used it to argue that what we now call bitcoin is not the real bitcoin. (...) The definition fails, however. This is important because the Chain Definition obscures Satoshi’s solution to a dilemma in the design of electronic cash, as well as the truth about bitcoin’s privacy and fungibility. In this article, I explain why the Chain Definition fails and what Satoshi likely endorsed instead. Along the way, I untangle some issues around bitcoin fungibility and clarify some others around the ontology of digital assets. (shrink)

Because of advanced automation, data exchange, and cyber-physical systems, traditional project risk management strategies are losing their effectiveness in the era of Industry 4.0. This study investigates how integrating Industry 4.0 technology into project risk management frameworks can have real-world implications. Using technologies like artificial intelligence (AI), big data analytics, and the Internet of Things (IoT), it proposes a new framework that enhances risk identification, assessment, and mitigation methods. In order to demonstrate how Industry 4.0 is transforming risk management (...) practices, this article examines real-world case studies and industry implementations. The framework addresses significant opportunities and challenges to provide practitioners with useful insights for adapting to the evolving technological context. The findings suggest that incorporating Industry 4.0 technologies can significantly improve risk management efficiency and project outcomes, offering a pathway for organizations to navigate the complexities of modern project environments. (shrink)

Ethics should guide the design of electronic health records (EHR), and recognized principles of bioethics can play an important role. This approach was adopted recently by a team of informaticists designing and testing a system where patients exert granular control over who views their personal health information. While this method of building ethics in from the start of the design process has significant benefits, questions remain about how useful the application of bioethics principles can be in this process, especially when (...) principles conflict. For instance, while the ethical principle of respect for autonomy supports a robust system of granular control, the principles of beneficence and non-maleficence counsel restraint due to the danger of patients being harmed by restrictions on provider access to data. Conflict between principles has long been recognized by ethicists and has even motivated attacks on approaches that state and apply principles. In this paper we show how using ethical principles can help in the design of EHRs by first, explaining how ethical principles can and should be used generally, and then by, discuss how attention to details in specific cases can show that the tension between principles is not as bad as it initially appeared. We conclude by suggesting further ways in which the application of these (and other) principles can add value to the ongoing discussion of patient involvement in their health care. This is a new approach to linking principles to informatics design that we expect will stimulate further interest. (shrink)

Medicine is often thought of as a science of the body, but it is also a science of data. In some contexts, it can even be asserted that data drive health. This article focuses on a key piece of data technology central to contemporary practices of medicine: the medical record. By situating the medical record in the perspective of its history, we inquire into how the kinds of data that are kept at sites of clinical encounter often depend on informational (...) requirements that originate well outside of the clinic, in particular in health insurance records systems. Although this dependency of today's electronic medical records on billing requirements is widely lamented by clinical providers, its history remains little studied. Following the archaeology of medicine developed by Michel Foucault in The Birth of the Clinic and expanding his methodology in light of more recent contributions to the field of media archaeology, this article excavates some of the underexplored technological conditions that help constitute today's electronic medical record. If in some contexts, it is true that data drive health, then an archaeology of medical records helps reveal how health insurance records often impact clinical care and, by extension, health and disease. (shrink)

This paper presents the Obstetric and Neonatal Ontology (OntONeo). This ontology has been created to provide a consensus representation of salient electronic health record (EHR) data and to serve interoperability of the associated data and information systems. More generally, it will serve interoperability of clinical and translational data, for example deriving from genomics disciplines and from clinical trials. Interoperability of EHR data is important to ensuring continuity of care during the prenatal and postnatal periods for both mother and child. (...) As a strategy to advance such interoperability we use an approach based on ontological realism and on the ontology development principles of the Open Biomedical Ontologies Foundry, including reuse of reference ontologies wherever possible. We describe the structure and coverage domain of OntONeo and the process of creating and maintaining the ontology. (shrink)

The goal of referent tracking is to create an ever-growing pool of data relating to the entities existing in concrete spatiotemporal reality. In the context of Electronic Healthcare Records (EHRs) the relevant concrete entities are not only particular patients but also their parts, diseases, therapies, lesions, and so forth, insofar as these are salient to diagnosis and treatment. Within a referent tracking system, all such entities are referred to directly and explicitly, something which cannot be achieved when familiar concept-based (...) class='Hi'>systems are used in what is called “clinical coding”. In this paper we describe the components of a referent tracking system in an informal way and we outline the procedures that would have to be followed by healthcare personnel in using such a system. We argue that the referent tracking paradigm can be introduced with only minor – though nevertheless ontologically important – technical changes to existing EHR infrastructures, but that it will require a radically different mindset on the part of those involved in clinical coding and terminology development from that which has prevailed hitherto. (shrink)