Conceptual modeling of a portion of the world is a necessary prerequisite to set the stage and define software system boundaries. In this context, one of the challenges is to provide a unified framework to create a comprehensive representation of the targeted domain. According to many researchers, conceptual model (CM) development is a hard task, and system requirements are difficult to collect, causing many miscommunication problems. Accordingly, CMs require more than modeling ability alone: they first require an understanding of (...) the targeted domain that the model attempts to represent. Accordingly, a preconceptual modeling (pre-CM) stage is intended to address ontological issues before typical CM development is initiated. It involves defining a portion of reality when entities and processes are differentiated and integrated as unified wholes. This pre-CM phase forms the focus of research in this paper. The purpose is not show how to model; rather, it is to demonstrate how to establish a metaphysical basis of the involved portion of reality. To demonstrate such a venture, we employ the so-called thinging machine (TM) modeling that has been proposed as a high-level CM. A TM model integrates staticity and dynamism grounded in a fundamental construct called a thimac (things/machine). It involves two modes of reality, existence (events) and subsistence (regions: roughly, specifications of things and processes). Currently, the dominant approach in CM has evolved to limit its scope of application to develop ontological categorization (types of things). In contrast, advocates of TM modeling have pursued a broader metaphysical study of the nature of the domain’s things and processes beyond categorization. In the TM approach, pre-CM metaphysics is viewed as a part and parcel of CM itself. The general research problem is how to map TM constructs to what is out there in the targeted domain. Discussions involve the nature of thimacs (things and processes) and subsistence and existence as they are superimposed over each other in reality. Specifically, we make two claims, (i) the perceptibility of regions as a phenomenon and (ii) the distinctiveness of existence as a construct for events. The results contribute to further the understanding of TM modeling in addition to introducing some metaphysical insights. (shrink)

In the last two decades, software process modeling has been an area of interest within both academia and industry. Software process modeling aims at defining and representing software processes in the form of models. A software process model represents the medium that allows better understanding, management and control of the software process. Software process metamodeling rather, provides standard metamodels which enable the defining of customized software process models (...) for a specific project in hand by instantiation. Several software process modeling/meta-modeling languages have been introduced to formalize software process models. Nonetheless, none of them has managed to introduce a compatible yet precise language to include all necessary concepts and information for software process modeling. This paper presents Software Process Meta-Modeling and Notation (SP2MN); a meta-modeling language that provides simple and expressive graphical notations for the aim of software process modeling. SP2MN has been evaluated based upon the well-known ISPW-6 process example, a standard benchmark problem for software process modeling. SP2MN has proved that it presents a valid and expressive software process modeling language. (shrink)

This paper has a dual character, combining a philosophical ontological exploration with a conceptual modeling approach in systems and software engineering. Such duality is already practiced in software engineering, in which the current dominant modeling thesis is object orientation. This work embraces an anti-thesis that centers solely on the process rather than emphasizing the object. The approach is called occurrence-only modeling, in which an occurrence means an event or process where a process is (...) defined as an orchestrated net of events that form a semantical whole. In contrast to object orientation, in this occurrence-only modeling objects are nothing more than long events. We apply this paradigm to (1) a UML/BPMN inventory system in simulation engineering and (2) an event-based system that represents medical occurrences that occur on a timeline. The aim of such a venture is to enhance the field of conceptual modeling by adding yet a new alternative methodology and clarifying differences among approaches. Conceptual modeling’s importance has been recognized in many research areas. An active research community in simulation engineering demonstrates the growing interest in conceptual modeling. In the clinical domains, temporal information elucidates the occurrence of medical events (e.g., visits, laboratory tests). These applications give an opportunity to propose a new approach that includes (a) a Stoic ontology that has two types of being, existence and subsistence; (b) Thinging machines that limit activities to five generic actions; and (c) Lupascian logic, which handles negative events. With such a study, we aim to substantiate the assertion that the “occurrence only” approach is a genuine philosophical base for conceptual modeling. The results in this paper seem to support such a claim. (shrink)

Today, software instruments support all parts of engineering work, from design to creation. Many engineering processes call for tedious routine appointments and torments with manual handoffs and data storehouses. AI designers train profound brain networks and incorporate them into software structures.

Integration sustainability outcomes give attention to construction ecology in the design review of urban environments to comply with Earth’s System that is composed of integral parts of the (i.e., physical, chemical and biological components). Naturally, exchange patterns of industrial ecology have consistent and periodic cycles to preserve energy flows and materials in Earth’s System. When engineering topology is affecting internal and external processes in system networks, it postulated the valence of the first-level spatial outcome (i.e., project compatibility success). These (...) instrumentalities are dependent on relating the second-level outcome (i.e., participant security satisfaction). The construction ecology-based topology (i.e., as feedback energy system) flows from biotic and abiotic resources in the entire Earth’s ecosystems. These spatial outcomes are providing an innovation, as entails a wide range of interactions to state, regulate and feedback “topology” to flow as “interdisciplinary equilibrium” of ecosystems. The interrelation dynamics of ecosystems are performing a process in a certain location within an appropriate time for characterizing their unique structure in “equilibrium patterns”, such as biosphere and collecting a composite structure of many distributed feedback flows. These interdisciplinary systems regulate their dynamics within complex structures. These dynamic mechanisms of the ecosystem regulate physical and chemical properties to enable a gradual and prolonged incremental pattern to develop a stable structure. The engineering topology of construction ecology for integration sustainability outcomes offers an interesting tool for ecologists and engineers in the simulation paradigm as an initial form of development structure within compatible computer software. This approach argues from ecology, resource savings, static load design, financial other pragmatic reasons, while an artistic/architectural perspective, these are not decisive. The paper described an attempt to unify analytic and analogical spatial modeling in developing urban environments as a relational setting, using optimization software and applied as an example of integrated industrial ecology where the construction process is based on a topology optimization approach. (shrink)

Basic abstraction principles are reached through ontology, which was traditionally conceived as a depiction of the world itself. Ontology is also described using conceptual modeling (CM) that defines fundamental concepts of reality. CM is one of the central activities in computer science, especially as it is mainly used in software engineering as an intermediate artifact for system construction. To achieve such a goal, we propose Stoic CM (SCM) as a description of what a system must do functionally with (...) minimal ambiguity. As a case study, we apply SCM to investigate the ontology of BPMN (business process modeling notation). Such an undertaking would demonstrate SCM notions and simultaneously may offer a viable ontological foundation for BPMN. SCM defines the being of things and actions in reality based on Stoic notions of existence and subsistence. It has two levels of specification: (1) a subsistence static model where things and actions subsist and (2) an existence dynamic model where things and actions exist in time. From the Stoic ontological point of view, while a thing existing has a clear denotation, subsistence indicates the thing is “being there,” but it is inactive (does not participate in an event). We apply SCM to BPMN processes that involve buying a new car with many notions, such as activity, task, event, and message. The result indicates that SCM produces a tighter representation of reality, thus providing the necessary description of the part in the application world to be used as requirements for developing the software system. (shrink)

Sabdabrahma Siddhanta, popularized by Patanjali and Bhartruhari will be scientifically analyzed. Sphota Vada, proposed and nurtured by the Sanskrit grammarians will be interpreted from modern physics and communication engineering points of view. Insight about the theory of language and modes of language acquisition and communication available in the Brahma Kanda of Vakyapadeeyam will be translated into modern computational terms. A flowchart of language processing in humans will be given. A gross model of human language acquisition, comprehension and communication (...) class='Hi'>process forming the basis to develop software for relevant mind-machine modeling will be presented. The implications of such a model to artificial intelligence and cognitive sciences will be discussed. The essentiality and necessity of a physics, communication engineering , biophysical and biochemical insight as both complementary and supplementary to using mathematical and computational methods in delineating the theory of Sanskrit language is put forward. Natural language comprehension as distinct and different from natural language processing is pointed out. (shrink)

Requirement specifications in software engineering involve developing a conceptual model of a target domain. The model is based on ontological exploration of things in reality. Many things in such a process closely tie to problems in metaphysics, the field of inquiry of what reality fundamentally is. According to some researchers, metaphysicians are trying to develop an account of the world that properly conceptualizes the way it is, and software design is similar. Notions such as classes, object (...) orientation, properties, instantiation, algorithms, etc. are metaphysical concepts developed many years ago. Exploring the metaphysics of such notions aims to establish quality assurance though some objective foundation not subject to misapprehensions and conventions. Much metaphysical work might best be understood as a model-building process. Here, a model is viewed as a hypothetical structure that we describe and investigate to understand more complex, real-world systems. The purpose of this paper is to enhance understanding of the metaphysical origins of conceptual modeling as exemplified by a specific proposed high-level model called thinging machines (TMs). The focus is on thimacs (things/machine) as a single category of TM modeling in the context of a two-phase world of staticity and dynamics. The general idea of this reality has been inspired by Deleuze’s ‘the virtual’ and related to the classical notions of Leibniz’s monads and Avicenna’s essence. The analysis of TMs leads to several interesting results about a thimac’s nature at the static and existence levels. (shrink)

What we have learnt in the last six or seven decades about virtual machinery, as a result of a great deal of science and technology, enables us to offer Darwin a new defence against critics who argued that only physical form, not mental capabilities and consciousness could be products of evolution by natural selection. The defence compares the mental phenomena mentioned by Darwin’s opponents with contents of virtual machinery in computing systems. Objects, states, events, and processes in virtual machinery which (...) we have only recently learnt how to design and build, and could not even have been thought about in Darwin’s time, can interact with the physical machinery in which they are implemented, without being identical with their physical implementation, nor mere aggregates of physical structures and processes. The existence of various kinds of virtual machinery (including both “platform” virtual machines that can host other virtual machines, e.g. operating systems, and “application” virtual machines, e.g. spelling checkers, and computer games) depends on complex webs of causal connections involving hardware and software structures, events and processes, where the specification of such causal webs requires concepts that cannot be defined in terms of concepts of the physical sciences. That indefinability, plus the possibility of various kinds of self-monitoring within virtual machinery, seems to explain some of the allegedly mysterious and irreducible features of consciousness that motivated Darwin’s critics and also more recent philosophers criticising AI. There are consequences for philosophy, psychology, neuroscience and robotics. (shrink)

Explorations in Systems Phenomenology in Relation to Ontology, Hermeneutics and the Meta-dialectics of Design -/- SYNOPSIS A Phenomenological Analysis of Emergent Design is performed based on the foundations of General Schemas Theory. The concept of Sign Engineering is explored in terms of Hermeneutics, Dialectics, and Ontology in order to define Emergent Systems and Metasystems Engineering based on the concept of Meta-dialectics. -/- ABSTRACT Phenomenology, Ontology, Hermeneutics, and Dialectics will dominate our inquiry into the nature of the Emergent Design (...) of the System and its inverse dual, the Meta-system. This is an speculative dissertation that attempts to produce a philosophical, mathematical, and theoretical view of the nature of Systems Engineering Design. Emergent System Design, i.e., the design of yet unheard of and/or hitherto non-existent Systems and Metasystems is the focus. This study is a frontal assault on the hard problem of explaining how Engineering produces new things, rather than a repetition or reordering of concepts that already exist. In this work the philosophies of E. Husserl, A. Gurwitsch, M. Heidegger, J. Derrida, G. Deleuze, A. Badiou, G. Hegel, I. Kant and other Continental Philosophers are brought to bear on different aspects of how new technological systems come into existence through the midwifery of Systems Engineering. Sign Engineering is singled out as the most important aspect of Systems Engineering. We will build on the work of Pieter Wisse and extend his theory of Sign Engineering to define Meta-dialectics in the form of Quadralectics and then Pentalectics. Along the way the various ontological levels of Being are explored in conjunction with the discovery that the Quadralectic is related to the possibility of design primarily at the Third Meta-level of Being, called Hyper Being. Design Process is dependent upon the emergent possibilities that appear in Hyper Being. Hyper Being, termed by Heidegger as Being (Being crossed-out) and termed by Derrida as Differance, also appears as the widest space within the Design Field at the third meta-level of Being and therefore provides the most leverage that is needed to produce emergent effects. Hyper Being is where possibilities appear within our worldview. Possibility is necessary for emergent events to occur. Hyper Being possibilities are extended by Wild Being propensities to allow the embodiment of new things. We discuss how this philosophical background relates to meta-methods such as the Gurevich Abstract State Machine and the Wisse Metapattern methods, as well as real-time architectural design methods as described in the Integral Software Engineering Methodology. One aim of this research is to find the foundation for extending the ISEM methodology to become a general purpose Systems Design Methodology. Our purpose is also to bring these philosophical considerations into the practical realm by examining P. Bourdieu’s ideas on the relationship between theoretical and practical reason and M. de Certeau’s ideas on practice. The relationship between design and implementation is seen in terms of the Set/Mass conceptual opposition. General Schemas Theory is used as a way of critiquing the dependence of Set based mathematics as a basis for Design. The dissertation delineates a new foundation for Systems Engineering as Emergent Engineering based on General Schemas Theory, and provides an advanced theory of Design based on the understanding of the meta-levels of Being, particularly focusing upon the relationship between Hyper Being and Wild Being in the context of Pure and Process Being. (shrink)

In conceptual modeling (CM) as a subdiscipline of software engineering, current proposed ontologies (categorical analysis of entities) are typically established through whole adoption of philosophical theories (e.g. Bunge’s). In this paper, we pursue an interdisciplinary research approach to develop a diagrammatic-based ontological foundation for CM using philosophical ontology as a secondary source. It is an endeavor to escape an offshore procurement of ontology from philosophy and implant it in CM. In such an effort, the CM diagrammatic language plays (...) an important role in contrast to dogmatic philosophical languages’ obsession with abstract entities. Specifically, this paper is about developing a descriptive (in contrast to formal) ontology that a modeler accepts as a supplementary account of reality when using thinging machines (TMs; i.e. a reality that uncovers the ontology of things that TM modeling discusses or “talks about,” akin to the ontology of natural language). Although existence is a well-established notion, we defend subsistence (Stoic term) as a supplementary mode of reality (e.g. reflection of event). The aim here is aligned toward developing CM notions and processes that are firm enough. Classical analysis of being per se (e.g. identity, substance, classes, objects) is de-emphasized in this work; nevertheless, philosophical concepts form an acknowledged authority to compare to. As a case study, such a methodology is applied to the notion of information that provides a common-sense understanding of the world. This application would enhance understanding of the TM methodology and clarify some of the issues that shed light on the question of the nature of information as an important concept in software engineering. Information is defined as about events; that is, it is about existing things. It is viewed as having a subsisting nature that exists only through being “carried on” by other things. The results seem to indicate a promising approach to define information and understand its nature. (shrink)

Computer simulations constitute a significant scientific tool for promoting scientific understanding of natural phenomena and dynamic processes. Substantial leaps in computational force and software engineering methodologies now allow the design and development of large-scale biological models, which – when combined with advanced graphics tools – may produce realistic biological scenarios, that reveal new scientific explanations and knowledge about real life phenomena. A state-of-the-art simulation system termed Reactive Animation (RA) will serve as a study case to examine the contemporary (...) philosophical debate on the scientific value of simulations, as we demonstrate its ability to form a scientific explanation of natural phenomena and to generate new emergent behaviors, making possible a prediction or hypothesis about the equivalent real-life phenomena. (shrink)

In this paper I describe a novel application of contemplative techniques to software engineering with the goal of augmenting the intellectual capabilities of knowledge workers within the field in four areas: flexibility, attention, creativity, and trust. The augmentation of software engineers’ intellectual capabilities is proposed as a third complement to the traditional focus of methodologies on the process and environmental factors of the software development endeavor. I argue that these capabilities have been shown to be (...) open to improvement through the practices traditionally used in spiritual traditions, but now used increasingly in other fields of knowledge work, such as in the medical profession and the education field. Historically, the intellectual capabilities of software engineers have been treated as a given within any particular software development effort. This is argued to be an aspect ripe for inclusion within software development methodologies. (shrink)

Computer simulations constitute a significant scientific tool for promoting scientific understanding of natural phenomena and dynamic processes. Substantial leaps in computational force and software engineering methodologies now allow the design and development of large-scale biological models, which – when combined with advanced graphics tools – may produce realistic biological scenarios, that reveal new scientific explanations and knowledge about real life phenomena. A state-of-the-art simulation system termed Reactive Animation (RA) will serve as a study case to examine the contemporary (...) philosophical debate on the scientific value of simulations, as we demonstrate its ability to form a scientific explanation of natural phenomena and to generate new emergent behaviors, making possible a prediction or hypothesis about the equivalent real-life phenomena. (shrink)

This is an explanation of a key new insight into the halting problem provided in the language of software engineering. Technical computer science terms are explained using software engineering terms. -/- To fully understand this paper a software engineer must be an expert in the C programming language, the x86 programming language, exactly how C translates into x86 and what an x86 process emulator is. No knowledge of the halting problem is required.

Computer simulations constitute a significant scientific tool for promoting scientific understanding of natural phenomena and dynamic processes. Substantial leaps in computational force and software engineering methodologies now allow the design and development of large-scale biological models, which – when combined with advanced graphics tools – may produce realistic biological scenarios, that reveal new scientific explanations and knowledge about real life phenomena. A state-of-the-art simulation system termed Reactive Animation (RA) will serve as a study case to examine the contemporary (...) philosophical debate on the scientific value of simulations, as we demonstrate its ability to form a scientific explanation of natural phenomena and to generate new emergent behaviors, making possible a prediction or hypothesis about the equivalent real-life phenomena. (shrink)

Borrowing the functional modeling approach common in systems and software engineering, an implementable model of the functions of human consciousness proposed to have the capacity for general problem solving ability transferable to any domain, or true self-aware intelligence, is presented. Being a functional model that is independent of implementation, this model is proposed to also be applicable to artificial consciousness, and to platforms that organize individuals into what is defined here as a first order collective consciousness, or at (...) higher orders into what is defined here as Nth order collective consciousness. Part I of this two-part article includes: Summary; Introduction; Set of Postulates One; Set of Postulates Two; Overview of the Model; Model of Homeostasis; Model of the Functional Units; Model of the Body System; Model of the Other Basic Life Processes; Model of the Other Functional Systems; Model of Perceptions in the Perceptual Fields; Model of Body Processes as Paths in the Perceptual Field; & Model of Conscious Awareness. (shrink)

This is an explanation of a possible new insight into the halting problem provided in the language of software engineering. Technical computer science terms are explained using software engineering terms. No knowledge of the halting problem is required. -/- It is based on fully operational software executed in the x86utm operating system. The x86utm operating system (based on an excellent open source x86 emulator) was created to study the details of the halting problem proof counter-examples (...) at the much higher level of abstraction of C/x86. (shrink)

This contribution examines two radically different explanations of our phenomenal intuitions, one reductive and one strongly non-reductive, and identifies two germane ideas that could benefit many other theories of consciousness. Firstly, the ability of sophisticated agent architectures with a purely physical implementation to support certain functional forms of qualia or proto-qualia appears to entail the possibility of machine consciousness with qualia, not only for reductive theories but also for the nonreductive ones that regard consciousness as ubiquitous in Nature. Secondly, analysis (...) of introspective psychological material seems to hint that, under the threshold of our ordinary waking awareness, there exist further ‘submerged’ or ‘subliminal’ layers of consciousness which constitute a hidden foundation and support and another source of our phenomenal intuitions. These ‘submerged’ layers might help explain certain puzzling phenomena concerning subliminal perception, such as the apparently ‘unconscious’ multisensory integration and learning of subliminal stimuli. (shrink)

Enterprise Risk Management involves the process of identification, evaluation, treatment, and communication regarding risks throughout the enterprise. To support the tasks associated with this process, several frameworks and modeling languages have been proposed, such as the Risk and Security Overlay (RSO) of ArchiMate. An ontological investigation of this artifact would reveal its adequacy, capabilities, and limitations w.r.t. the domain of risk and security. Based on that, a language redesign can be proposed as a refinement. Such analysis and redesign (...) have been executed for the risk elements of the RSO grounded in the Common Ontology of Value and Risk. The next step along this line of research is to address the following research problems: What would be the outcome of an ontological analysis of security-related elements of the RSO? That is, can we identify other semantic deficiencies in the RSO through an ontological analysis? Once such an analysis is provided, can we redesign the security elements of the RSO accordingly, in order to produce an improved artifact? Here, with the aid of the Reference Ontology for Security Engineering (ROSE) and the ontological theory of prevention behind it, we address the remaining gap by proceeding with an ontological analysis of the security-related constructs of the RSO. The outcome of this assessment is an ontology-based redesign of the ArchiMate language regarding security modeling. In a nutshell, we report the following contributions: (1) an ontological analysis of the RSO that identifies six limitations concerning security modeling; (2) because of the key role of the notion of prevention in security modeling, the introduction of the ontological theory of prevention in ArchiMate; (3) a well-founded redesign of security elements of ArchiMate; and (4) ontology-based security modeling patterns that are logical consequences of our proposal of redesign due to its underlying ontology of security. As a form of evaluation, we show that our proposal can describe risk treatment options, according to ISO 31000. Finally, besides presenting multiple examples, we proceed with a real-world illustrative application taken from the cybersecurity domain. (shrink)

Four modes of language acquisition and communication are presented translating ancient Indian expressions on human consciousness, mind, their form, structure and function clubbing with the Sabdabrahma theory of language acquisition and communication. The modern scientific understanding of such an insight is discussed. . A flowchart of language processing in humans will be given. A gross model of human language acquisition, comprehension and communication process forming the basis to develop software for relevantmind-machine modeling will be presented. The implications of (...) such a model to artificial intelligence and cognitive sciences will be discussed. The essential nature and necessity of a physics, communication engineering , biophysical and biochemical insight as both complementary and supplementary to using mathematical and computational methods in delineating the theory of language processing in humans is put forward. (shrink)

Neutrosophic set, neutrosophic logic, neutrosophic probability, neutrosophic statistics, neutrosophic measure, neutrosophic precalculus, neutrosophic calculus and so on are gaining significant attention in solving many real life problems that involve uncertainty, impreciseness, vagueness, incompleteness, inconsistent, and indeterminacy. In the past years the fields of neutrosophics have been extended and applied in various fields, such as: artificial intelligence, data mining, soft computing, decision making in incomplete / indeterminate / inconsistent information systems, image processing, computational modelling, robotics, medical diagnosis, biomedical engineering, investment (...) problems, economic forecasting, social science, humanistic and practical achievements. There are about 7,000 neutrosophic researchers, within 89 countries around the globe, that have produced about 4,000 publications and tenths of PhD and MSc theses, within more than two decades. This is the sixth volume of the Encyclopedia of Neutrosophic Researchers, edited from materials offered by the authors who responded to the editor’s invitation, with an introduction contains a short history of neutrosophics, together with links to the main papers and books. -/- ES: Este es el Sexto volumen de la Enciclopedia de Investigadores Neutróficos, editados a partir de materiales ofrecidos por los autores que respondieron a la invitación del editor. Los autores se enumeran alfabéticamente. La introducción contiene una breve historia de la neutrosófica, y en especial se sus impacto en latinoamérica junto con enlaces a los principales artículos y libros. Conjunto neutrosófico, lógica neutrosófica, probabilidad neutrosófica, estadística neutrosófica, medida neutrosófica, precálculo neutrosófico, cálculo neutrosófico, psicología neutrosófica, sociología neutrosófica etc., están ganando una atención significativa en resolver muchos problemas de la vida real que implican incertidumbre, imprecisión, vaguedad, incompletitud, inconsistencia e indeterminación. En los últimos años, los campos de la neutrosófica se han ampliado y aplicado en diversos campos, tales como: inteligencia artificial, minería de datos, software informática, toma de decisiones en forma incompleta / indeterminada / inconsistente sistemas de información, procesamiento de imágenes, modelado computacional, robótica, diagnóstico médico, ingeniería biomédica, problemas de inversión, previsión económica, ciencias sociales, humanística y la validación y consolidación del conocimiento científico. (shrink)

The study, design and development of a low-cost digital braille printer is boarded with a transdisciplinary approach. The main challenge was focused on reducing significantly the high cost of this type of printers and their printing services. This context is aggravated with the low commercialization of these products in the country, a factor that makes the access of these tools -that are essential to much of the low and middle sectors of the Argentine social structure- even more difficult. An interdisciplinary (...) group of teachers, graduates and students of the careers of industrial design and informatics degree from the National University of La Plata, developed the design and prototype of a braille printer. The work was carried out according to the principles of Gandhian Engineering, based on the reuse of ink-jet printers. The project consists of the design, development and generation of a low-cost Braille printer, produced locally, which prioritizes the use of nationally manufactured components for assembly. To achieve this, an electronic and electromechanical system was designed and manufactured to adapt any Inkjet printer to the objectives of the project, enabling the recycling of obsolete printers. This means, it is proposed to resolve through the use of text printers, applying technical knowledge of computer science and industrial design, to adapt the technological components to the Braille lexicon printer. They also developed, on the one hand, software that controls the printer and allows its use in a simple and accessible way. On the other hand, the hardware and external components were adapted with 3D printing technology and thermoforming, producing a housing that contains the entire printer. Finally, a systematization of the assembly process of the printer prototype was carried out, making it possible to replicate it. Using methodologies of Gandhian Design, a prototype and two alternative proposals of carcasses were obtained. The main objective, which guided this work, was that blind people can access low-cost braille printers promoting by this a favorable impact on the cultural development of their daily lives. (shrink)

In this essay we collect and put together a number of ideas relevant to the under- standing of the phenomenon of creativity, confining our considerations mostly to the domain of cognitive psychology while we will, on a few occasions, hint at neuropsy- chological underpinnings as well. In this, we will mostly focus on creativity in science, since creativity in other domains of human endeavor have common links with scientific creativity while differing in numerous other specific respects. We begin by briefly (...) introducing a few basic notions relating to cognition, among which the notion of ‘concepts’ is of basic relevance. The myriads of concepts lodged in our mind constitute a ‘conceptual space’ of an enormously complex structure, where con- cepts are correlated by beliefs that are themselves made up of concepts and are as- sociated with emotions. The conceptual space, moreover, is perpetually in a state of dynamic evolution that is once again of a complex nature. A major component of the dynamic evolution is made up of incessant acts of inference, where an inference occurs essentially by means of a succession of correlations among concepts set up with beliefs and heuristics, the latter being beliefs of a special kind, namely, ones relatively free of emotional associations and possessed of a relatively greater degree of justification. Beliefs, along with heuristics, have been described as the ‘mind’s software’, and con- stitute important cognitive components of the self-linked psychological resources of an individual. The self is the psychological engine driving all our mental and physical activity, and is in a state of ceaseless dynamics resulting from one’s most intimate ex- periences of the world accumulating in the course of one’s journey through life. Many of our psychological resources are of a dual character, having both a self-linked and a shared character, the latter being held in common with larger groups of people and imbibed from cultural inputs. We focus on the privately held self-linked beliefs of an individual, since these are presumably of central relevance in making possible inductive inferences – ones in which there arises a fundamental need of adopting a choice or making a decision. Beliefs, decisions, and inferences, all have the common link to the self of an individual and, in this, are fundamentally analogous to free will, where all of these have an aspect of non-determinism inherent in them. Creativity involves a major restructuring of the conceptual space where a sustained inferential process eventually links remote conceptual domains, thereby opening up the possibility of a large number of new correlations between remote concepts by a cascading process. Since the process of inductive inference depends crucially on de- cisions at critical junctures of the inferential chain, it becomes necessary to examine the basic mechanism underlying the making of decisions. In the framework that we attempt to build up for the understanding of scientific creativity, this role of decision making in the inferential process assumes central relevance. With this background in place, we briefly sketch the affect theory of decisions. Affect is an innate system of response to perceptual inputs received either from the exter- nal world or from the internal physiological and psychological environment whereby a positive or negative valence gets associated with a perceptual input. Almost every sit- uation faced by an individual, even one experienced tacitly, i.e., without overt aware-ness, elicits an affective response from him, carrying a positive or negative valence that underlies all sorts of decision making, including ones carried out unconsciously in inferential processes. Referring to the process of inferential exploration of the conceptual space that gener- ates the possibility of correlations being established between remote conceptual do- mains, such exploration is guided and steered at every stage by the affect system, analogous to the way a complex computer program proceeds through junctures where the program ascertains whether specified conditions are met with by way of generating appropriate numerical values – for instance, the program takes different routes, depending on whether some particular numerical value turns out to be positive or negative. The valence generated by the affect system in the process of adoption of a choice plays a similar role which therefore is of crucial relevance in inferential processes, especially in the exploration of the conceptual space where remote domains need to be linked up – the affect system produces a response along a single value dimension, resembling a number with a sign and a magnitude. While the affect system plays a guiding role in the exploration of the conceptual space, the process of exploration itself consists of the establishment of correlations between concepts by means of beliefs and heuristics, the self-linked ones among the latter having a special role in making possible the inferential journey along alternative routes whenever the shared rules of inference become inadequate. A successful access to a remote conceptual domain, necessary for the creative solution of a standing problem or anomaly – one that could not be solved within the limited domain hitherto accessed – requires a phase of relatively slow cumulative search and then, at some stage, a rapid cascading process when a solution is in sight. Representing the conceptual space in the form of a complex network, the overall process can be likened to one of self-organized criticality commonly observed in the dynamical evolution of complex systems. In order that inferential access to remote domains may actually be possible, it is necessary that restrictions on the exploration process – necessary for setting the context in ordinary instances of inductive inference – be relaxed and a relatively free exploration in a larger conceptual terrain be made possible. This is achieved by the mind going into the default mode, where external constraints – ones imposed by shared beliefs and modes of exploration – are made inoperative. While explaining all these various aspects of the creative process, we underline the supremely important role that analogy plays in it. Broadly speaking, analogy is in the nature of a heuristic, establishing correlations between concepts. However, analo- gies are very special in that these are particularly effective in establishing correlations among remote concepts, since analogy works without regard to the contiguity of the concepts in the conceptual space. In establishing links between concepts, analogies have the power to light up entire terrains in the conceptual space when a rapid cas- cading of fresh correlations becomes possible. The creative process occurs within the mind of a single individual or of a few closely collaborating individuals, but is then continued by an entire epistemic community, eventually resulting in a conceptual revolution. Such conceptual revolutions make pos- sible the radical revision of scientific theories whereby the scope of an extant theory is broadened and a new theoretical framework makes its appearance. The emerging theory is characterized by a certain degree of incommensurability when compared with the earlier one – a feature that may appear strange at first sight. But incommen- surability does not mean incompatibility and the apparently contrary features of the relation between the successive theories may be traced to the multi-layered structureof the conceptual space where concepts are correlated not by means of single links but by multiple ones, thereby generating multiple layers of correlation, among which some are retained and some created afresh in a conceptual restructuring. We conclude with the observation that creativity occurs on all scales. Analogous to correlations being set up across domains in the conceptual space and new domains being generated, processes with similar features can occur within the confines of a domain where a new layer of inferential links may be generated, connecting up sub- domains. In this context, insight can be looked upon as an instance of creativity within the confines of a domain of a relatively limited extent. (shrink)

Science urges philosophy to be more empirical and philosophy urges science to be more reflective. This markedly occurred along the “discovery of the artificial” (CORDESCHI 2002): in the early days of Cybernetics and Artificial Intelligence (AI) researchers aimed at making machines more cognizant while setting up a framework to better understand human intelligence. By and large, those genuine goals still hold today, whereas AI has become more concerned with specific aspects of intelligence, such as (machine) learning, reasoning, vision, and action. (...) As a matter of fact, the field suffers from a chasm between two formerly integrated aspects. One is the engineering endeavour involving the development of tools, e.g., autonomous systems for driving cars as well as software for semantic information retrieval. The other is the philosophical debate that tries to answer questions concerning the nature of intelligence. Bridging these two levels can indeed be crucial in developing a deeper understanding of minds. An opportunity might be offered by the cogent theme of emotions. Traditionally, computer science, psychological and philosophical research have been compelled to investigate mental processes that do not involve mood, emotions and feelings, in spite of Simon’s early caveat (SIMON 1967) that a general theory of cognition must incorporate the influences of emotion. Given recent neurobiological findings and technological advances, the time is ripe to seriously weigh this promising, albeit controversial, opportunity. (shrink)

Preparing students for the real challenges in life is one of the most important goals in education. Constructivism is an approach that uses real-life experiences to construct knowledge. Problem-Based Learning (PBL), for almost five decades now, has been the most innovative constructivist pedagogy used worldwide. However, with the rising popularity, there is a need to revisit empirical studies regarding PBL to serve as a guide and basis for designing new studies, making institutional policies, and evaluating educational curricula. This need has (...) led the researchers to do a meta-analysis to analyse the effectiveness of PBL on secondary students’ achievement in different scientific disciplines. Following the set of inclusion and exclusion criteria, 11 studies in Eurasia, Africa, and America conducted from 2016 to 2020 have qualified for this study. Six of which focused on JHS (n = 1047) and five on SHS (n = 375). Studies were obtained from various meta-search engines including Google, ERIC, and JSTOR. Further, the researchers used Harzing’s Publish and Perish software to exhaust the search process. Sample size, mean, and standard deviation were analysed using the Comprehensive MetaAnalysis version 3 to determine the effect sizes (Hedge’s g) and the results of moderator analysis, forest plot, funnel plot, and Begg-Mazumdar test. Findings have shown that PBL, as an approach to teaching science, had a large and positive effect (ES = .871) on the achievement of secondary students. However, grade levels and various scientific disciplines did not influence students’ learning achievement. The conduct of more studies on the different factors affecting PBL implementation and specific effects of PBL on various student domains is recommended to facilitate comparative educational research in the future. (shrink)

The study aimed to identify the impact of the internal factors of process re-engineering in achieving organizational justice on relief organizations operating in the southern governorates - Palestine. Analytical, and a questionnaire was used to collect information that contributes to achieving the objectives of the study, and the study population consisted of employees in relief organizations, and a stratified random sample was used to collect data from 60 relief institutions. The study showed that the general estimate of the (...) internal factors for process re-engineering amounted to 76.44%, and the results showed close ratios and values for the various study axes, and the relative weight of the strategic planning axis was 76.3%, the information technology axis 79.5%, and the work regulations and regulations axis 83.7%, and between the study The relative weight of organizational justice reached 82.2%. The results also showed that training and empowering employees in organizations contributes to achieving organizational justice. The study recommended the need to provide a budget for training and development, with the need to build clear foundations to motivate and encourage employees in organizations, and define clear criteria for distributing Services for the promotion of distributive justice procedures in organizations. (shrink)

The study aimed to identify the reality of re-engineering administrative processes in relief organizations operating in the southern governorates - Palestine. The study used the descriptive analytical method, and the questionnaire was used to collect information that contributes to achieving the objectives of the study, and the study population consisted of workers in relief organizations. To achieve the objectives of the study, the researchers used a stratified random sample to collect data from 60 relief institutions. The study showed that (...) the relative weight of the administrative process re-engineering was 78.2%, and the results showed close ratios and values for the different study axes. The relative weight of the leadership style axis was 81.5%, the management support axis was 75.5%, the strategic planning axis was 76.3%, and the information technology axis was 79.5. %, and the axis of labor regulations and regulations 83.7%, The study recommended the need to provide a budget for training and development, with the need to build clear foundations to motivate and encourage workers in organizations. (shrink)

The paper reviewed financial resources which is a critical factor and component of Business Process Re-engineering in achieving academic performance of higher education institutions in the Democratic Republic of Congo. The objective of the study is to examine whether financial resources can contribute to improving and achieving academic performance of higher education institutions in general and students in particular. The study used a systematic literature review and content analysis was to establish the relationship between financial resources and academic (...) performance. The key findings are grouped in three dimensions: 1) financial resources; 2) budget and funding/financial model; 3) tuitions fees, scholarship and loans provision. The study found consistent evidence to show that there is a significant and positive relationship between financial resources and performance of higher education institutions. The study concluded that higher education sector in the Democratic Republic of Congo needs a radical change and fundamental rethinking in improving educational budget processes to meet the needs of the institutions, provision of scholarship and loans processes to students mainly those from poor background and designing innovative financial/funding model to sustain educational institutions. The study is based on academic capitalism theory. The recommendations were made based on the findings of the study. -/- . (shrink)

This paper discusses the logical space of alternative conceptual engineering projects, with a specific focus on (1) the processes, (2) the targets and goals, and (3) the methods of such projects. We present an overview of how these three aspects interact in the contemporary literature and discuss those alternative projects that have yet to be explored based on our suggested typology. We show how choices about each element in a conceptual engineering project constrain the possibilities for the others, (...) thereby giving rise to distinct groupings of possible projects under the banner of conceptual engineering. We conclude with a critical reflection on the potential ethical issues that arise as a result of effectively putting conceptual engineering into practice. (shrink)

Software application ontologies have the potential to become the keystone in state-of-the-art information management techniques. It is expected that these ontologies will support the sort of reasoning power required to navigate large and complex terminologies correctly and efficiently. Yet, there is one problem in particular that continues to stand in our way. As these terminological structures increase in size and complexity, and the drive to integrate them inevitably swells, it is clear that the level of consistency required for such (...) navigation will become correspondingly difficult to maintain. While descriptive semantic representations are certainly a necessary component to any adequate ontology-based system, so long as ontology engineers rely solely on semantic information, without a sound ontological theory informing their modeling decisions, this goal will surely remain out of reach. In this paper we describe how Language and Computing nv (L&C), along with The Institute for Formal Ontology and Medical Information Sciences (IFOMIS), are working towards developing and implementing just such a theory, combining the open software architecture of L&C’s LinkSuiteTM with the philosophical rigor of IFOMIS’s Basic Formal Ontology. In this way we aim to move beyond the more or less simple controlled vocabularies that have dominated the industry to date. (shrink)

Physicians try hard to alleviate mental and physical ailments of their patients. Thus, they are heavily burdened by observing ethics and staying well-informed while improving health of their patients. A major ethical concern or dilemma in medication is that some physicians know their behavior is unethical, yet act against their moral compass. This study develops models of theory–practice gap, offering optimal solutions for the gap. These solutions would enhance self-motivation or remove external obstacles to stimulate ethical practices in medicine. The (...) Constructivist Grounded Theory Methodology is applied here where the participants and the main researcher mutually interacted with each other. Data collection was performed through qualitative methods including observation and semi-structured interviews with 21 physicians and medical students. Initial and focused coding was done, from which principal concepts were later extracted. MAXQDA software was used for analyzing data. Analysis of twelve major concepts in the study resulted in two factors and solution groups, from which four general notions influencing the ethical theory and practice gap in medicine were extracted: providing effective education to change attitude and behavior; considering motivational and emotional factors; reconstructing regulations and processes to facilitate ethical practice; conducting comprehensive and systematic studies. The existing medical educational system needs to be reconsidered to add to individual internal motivation, including optimizing persuasion strategies, maximizing participation of students, adhering to virtuous ethical theories, and fostering emotions. Additionally, regulations and processes can be reconstructed to remove practical obstacles and promote ethical practice with insignificant damages to individual self-motivation. (shrink)

The study aimed to identify the digital transformation in Non-Governmental Organizations in Palestine, and the study used the descriptive analytical approach, and a structured questionnaire was used to collect data that contribute to achieving the objectives of the study, and the study population consists of employees in Non-Governmental Organizations in the southern Palestinian governorates, and a random sample was used to collect Data where (183) applicable questionnaires were retrieved. The results of the study showed that the general assessment of digital (...) transformation reached (83.92%), and that the arrangement of areas of digital transformation is as follows: (infrastructure, organizational culture, human resources, leadership and administrative support, plans and strategies, material resources). The study presented a set of recommendations, the most important of which are: the necessity of providing a budget for training and development, attracting expertise and specialists in digital transformation to work in organizations, and providing the necessary software tools to build and manage the digital transformation process. (shrink)

The study aimed to identify the digital transformation in Non-Governmental Organizations in Palestine, and the study used the descriptive analytical approach, and a structured questionnaire was used to collect data that contribute to achieving the objectives of the study, and the study population consists of employees in Non-Governmental Organizations in the southern Palestinian governorates, and a random sample was used to collect Data where (183) applicable questionnaires were retrieved. The results of the study showed that the general assessment of digital (...) transformation reached (83.92%), and that the arrangement of areas of digital transformation is as follows: (infrastructure, organizational culture, human resources, leadership and administrative support, plans and strategies, material resources). The study presented a set of recommendations, the most important of which are: the necessity of providing a budget for training and development, attracting expertise and specialists in digital transformation to work in organizations, and providing the necessary software tools to build and manage the digital transformation process. (shrink)

The integration of information resources in the life sciences is one of the most challenging problems facing bioinformatics today. We describe how Language and Computing nv, originally a developer of ontology-based natural language understanding systems for the healthcare domain, is developing a framework for the integration of structured data with unstructured information contained in natural language texts. L&C’s LinkSuite™ combines the flexibility of a modular software architecture with an ontology based on rigorous philosophical and logical principles that is designed (...) to comprehend the basic formal relationships that structure both reality and the ways humans perceive and communicate about reality. (shrink)

Korea Atomic Energy Research Institute (KAERI) has been carrying out a scaled-down moderator test program to simulate the CANDU-6 moderator circulation phenomena during steady state operation and accident conditions. The Moderator Circulation Test (MCT) facility was designed and constructed as 1/4 scale of the prototype of CANDU-6 reactor. In the present work spatial distribution of two-dimensional velocity in the MCT facility under isothermal condition was measured using planar Particle Image Velocimetry (PIV) system which consists of double pulsed laser, synchronizer, and (...) high speed camera. TSI’s Insight TM 4G software was used to perform PIV image capturing, PIV calculation and post processing. 10 μm sized silver-coated hollow sphere particles were used as flow tracer particles. Multiple experiments were conducted to cover large area of the MCT facility with limited field of view of a single camera. Instantaneous and averaged velocity field were analyzed for each spatial position and flow rate. This research is capable of offering validation data for self-reliant CFD tools to predict moderator subcooling margin in CANDU-6 reactor. (shrink)

Moral (or ethical) sensitivity is widely viewed as a foundational learning goal in engineering ethics education. We have argued in this paper is that this view of moral sensitivity cannot be readily transported from the nursing context to the engineering context on the basis of a care-analogy. The particularized care characteristic of the nursing context is decisively different from the generalized and universalized forms of care characteristic of the engineering context. Through a focus on care and maintenance, (...) the engineering student’s moral sensitivity can be refined, opening up a perceptual awakening and affectivity towards the complex nature of the engineer’s Other. This awakening is in part promoted through an understanding of the ideology of neutrality as a moment in the history engineering. Becoming aware of this ideology as an ideology can then be seen as an activity of dividing loyalties that allows for a reflexive and critical view of the biases and presuppositions inherited within the world of engineering. This process of deepening the engineering student’s moral sensitivity is perhaps as much a process of the student becoming aware of her professional world, how it shapes her understanding of herself, and what it means to be a good engineer. (shrink)

A process of intelligence gathering begins when a user enters a query into the system. Several objects can match the result of a query with different degrees of relevance. Most systems estimate a numeric value about how well each object matches the query and classifies objects according to this value. Many researches have focused on practices of intelligence gathering. In knowledge engineering, knowledge gathering consists in fiding it from structured and unstructured sources in a way that must represent (...) knowledge in a way that facilitates inference. DOI: 10.13140/RG.2.2.32191.15527. (shrink)

Making decisions with an, often significant, element of risk seems to be an integral part of many of the projects of the diverse profession of engineering. Whether it be decisions about the design of products, manufacturing processes, public works, or developing technological solutions to environmental, social and global problems, risk taking seems inherent to the profession. Despite this, little attention has been paid to the topic and specifically to how our understanding of engineering as a distinctive profession might (...) affect how we should make decisions under risk. This paper seeks to remedy this, firstly by offering a nuanced account of risk and then by considering how specific claims about our understanding of engineering as a social profession, with corresponding social values and obligations, should inform how we make decisions about risk in this context. (shrink)

This study aimed to identify the availability of business process re-engineering requirements in Palestinian industrial companies, and to identify the nature of relationship and direction between business process re-engineering requirements and product quality in these companies, in addition to determine whether the market orientation plays a mediating role in the relationship between business process re-engineering requirements and product quality. To achieve study objectives, the researcher designed a questionnaire as a study tool, was distributed on (...) sample of (231) employee selected from the senior management in Palestinian industrial companies. The results shows: business process re-engineering requirements (Organizational, Technological, Human) are available in Palestinian industrial companies with a large degree. There is a positive impact with a statistical significance the availability of business process re-engineering requirements on market orientation and achieving product quality in Palestinian industrial companies. There is a positive impact with a statistical significance the market orientation adoption and achieving product quality in Palestinian industrial companies. Results revealed that market orientation mediating the relationship between business process re-engineering requirements and achieving product quality. The Main recommendations: Needing of senior management to make attention about modern management methods, as well as relying on scientific and field approach to solve and tackle problems. Senior management should be recognize the importance of market orientation, and works on linking it with information systems, and it's basic center should be concentrates on meeting customer needs. Key words: strategic orientation, modern management methods, operational performance, product quality, marketing . (shrink)

Interactions between an intelligent software agent and a human user are ubiquitous in everyday situations such as access to information, entertainment, and purchases. In such interactions, the ISA mediates the user’s access to the content, or controls some other aspect of the user experience, and is not designed to be neutral about outcomes of user choices. Like human users, ISAs are driven by goals, make autonomous decisions, and can learn from experience. Using ideas from bounded rationality, we frame these (...) interactions as instances of an ISA whose reward depends on actions performed by the user. Such agents benefit by steering the user’s behaviour towards outcomes that maximise the ISA’s utility, which may or may not be aligned with that of the user. Video games, news recommendation aggregation engines, and fitness trackers can all be instances of this general case. Our analysis facilitates distinguishing various subcases of interaction, as well as second-order effects that might include the possibility for adaptive interfaces to induce behavioural addiction, and/or change in user belief. We present these types of interaction within a conceptual framework, and review current examples of persuasive technologies and the issues that arise from their use. We argue that the nature of the feedback commonly used by learning agents to update their models and subsequent decisions could steer the behaviour of human users away from what benefits them, and in a direction that can undermine autonomy and cause further disparity between actions and goals as exemplified by addictive and compulsive behaviour. We discuss some of the ethical, social and legal implications of this technology and argue that it can sometimes exploit and reinforce weaknesses in human beings. (shrink)

Philosophical work exploring the relation between cognition and the Internet is now an active area of research. Some adopt an externalist framework, arguing that the Internet should be seen as environmental scaffolding that drives and shapes cognition. However, despite growing interest in this topic, little attention has been paid to how the Internet influences our affective life — our moods, emotions, and our ability to regulate these and other feeling states. We argue that the Internet scaffolds not only cognition but (...) also affect. Using various case studies, we consider some ways that we are increasingly dependent on our Internet-enabled “techno-social niches” to regulate the contours of our own affective life and participate in the affective lives of others. We argue further that, unlike many of the other environmental resources we use to regulate affect, the Internet has distinct properties that introduce new dimensions of complexity to these regulative processes. First, it is radically social in a way many of these other resources are not. Second, it is a radically distributed and decentralized resource; no one individual or agent is responsible for the Internet’s content or its affective impact on users. Accordingly, while the Internet can profoundly augment and enrich our affective life and deepen our connection with others, there is also a distinctive kind of affective precarity built into our online endeavors as well. (shrink)

In this paper, I examine Max Deutsch’s dilemma for the implementation of newly engineered concepts. In the debate over this dilemma, the goal of conceptual engineering tends to be set either too high or too low. As a result, implementation tends to be seen as either very unlikely to succeed or too easily achievable. This paper aims to offer a way out of this dilemma. I argue that the success conditions for implementation can be better understood if we distinguish (...) between different stages in the implementation process. Implementation is a complex process involving several stages, each of which can be evaluated as a success or a failure. I argue that even if an implementation does not reach the final stage in which a new concept is widely used in the society at large, it may not be a complete failure: conceptual engineers may not even aim for a new concept to be widely used in the society at large; or even if they do and a new concept only circulates in a smaller subgroup, this can still be a significant achievement. The upshot is that we should take more seriously the possibility that conceptual engineering can be implemented locally at the subgroup level. (shrink)

Abstract. The article is devoted to the possibilities of the formation and development of engineering thinking. The paper considers the features of engineering thinking, compares various concepts that characterize engineering activities. The authors compare the concepts of technical, economic, research thinking, identifying the principles of engineering thinking. The need for a humanitarian component in engineering thinking is noted. Consistency and multidimensionality are considered by the authors as the most important concepts for the formation of (...) class='Hi'>engineering thinking. In conclusion, the authors point out that engineering thinking universally orients the employee when solving different types of tasks and contributes to greater variability in making standard and non-standard decisions in the production process. -/- . (shrink)

I analyse the impact of search engines on our cognitive and epistemic practices. For that purpose, I describe the processes of assessment of documents on the Web as relying on distributed cognition. Search engines together with Web users, are distributed assessment systems whose task is to enable efficient allocation of cognitive resources of those who use search engines. Specifying the cognitive function of search engines within these distributed assessment systems allows interpreting anew the changes that have been caused by search (...) engine technologies. I describe search engines as implementing reputation systems and point out the similarities with other reputation systems. I thus call attention to the continuity in the distributed cognitive processes that determine the allocation of cognitive resources for information gathering from others. (shrink)

This paper attempts to do the following things. First, it reinterprets the notion of «mind engineering» from a more neutral standpoint and offers a totally new approach to the phenomenon. Thus, instead of looking at the phenomenon from a wholly negative perspective (such as identification of mind engineering with «brainwashing», «mind control» and other coercive and manipulatory techniques), it defines mind engineering as the process of «design/redesign, implementation/reimplementation, evaluation/reevaluation of minds». In itself, this process can (...) be deliberate or forceful. Here, the author looks at deliberate mind engineering primarily. Secondly, the «mind» is defined as a set of beliefs, and the latter, following Charles Peirce, is interpreted as the set of habits. The phenomenon of habit is interpreted pragmatically-hermeneutically and is defined as a «‘fixed’ functional interpretation of the world and one’s place in it that either works or does not work». If a specific interpretation constantly works, it constitutes a «good» habit. If it does not work, it means a «bad» habit. Unlike the current social-psychological approaches to habit as goal-independent and automatic, and therefore «mindless»/non-cognitive, the author claims that habits are essentially goal-dependent, and cognitive. The habit’s main goal is to resolve the problematic situation that the organism is in. Habit’s cognitive element is grounded in the organism’s interpretive effort that allows it to specify a problematic situation as problematic. Therefore, the connection between the organism and a situation is not direct/immediate but rather is mediated via functional interpretive meaning. In the end, mind engineering must be taken as «habit engineering», and, thus understood, the phenomenon in question can be seen as one of the key phenomena to clarify human nature. (shrink)

The scientific study of living organisms is permeated by machine and design metaphors. Genes are thought of as the ‘‘blueprint’’ of an organism, organisms are ‘‘reverse engineered’’ to discover their functionality, and living cells are compared to biochemical factories, complete with assembly lines, transport systems, messenger circuits, etc. Although the notion of design is indispensable to think about adaptations, and engineering analogies have considerable heuristic value (e.g., optimality assumptions), we argue they are limited in several important respects. In particular, (...) the analogy with human-made machines falters when we move down to the level of molecular biology and genetics. Living organisms are far more messy and less transparent than human-made machines. Notoriously, evolution is an opportunistic tinkerer, blindly stumbling on ‘‘designs’’ that no sensible engineer would come up with. Despite impressive technological innovation, the prospect of artificially designing new life forms from scratch has proven more difficult than the superficial analogy with ‘‘programming’’ the right ‘‘software’’ would suggest. The idea of applying straightforward engineering approaches to living systems and their genomes— isolating functional components, designing new parts from scratch, recombining and assembling them into novel life forms—pushes the analogy with human artifacts beyond its limits. In the absence of a one-to-one correspondence between genotype and phenotype, there is no straightforward way to implement novel biological functions and design new life forms. Both the developmental complexity of gene expression and the multifarious interactions of genes and environments are serious obstacles for ‘‘engineering’’ a particular phenotype. The problem of reverse-engineering a desired phenotype to its genetic ‘‘instructions’’ is probably intractable for any but the most simple phenotypes. Recent developments in the field of bio-engineering and synthetic biology reflect these limitations. Instead of genetically engineering a desired trait from scratch, as the machine/engineering metaphor promises, researchers are making greater strides by co-opting natural selection to ‘‘search’’ for a suitable genotype, or by borrowing and recombining genetic material from extant life forms. (shrink)

The comprehensive nature of information and insight available in the Upanishads, the Indian philosophical systems like the Advaita Philosophy, Sabdabrahma Siddhanta, Sphota Vaada and the Shaddarsanas, in relation to the idea of human consciousness, mind and its functions, cognitive science and scheme of human cognition and communication are presented. All this is highlighted with vivid classification of conscious-, cognitive-, functional- states of mind; by differentiating cognition as a combination of cognitive agent, cognizing element, cognized element; formation; form and structure of (...) cognition, instruments and means of cognition, validity of cognition and the nature of energy/matter which facilitates and also is the medium of cognition- cognizing process; and also as the container and content of cognition. The human communication process which is just the reverse of cognizing process is also presented with necessary description and detail. The sameness of cognitive / communicative process during language acquisition and communication processes and the modes of language acquisition and communication are also given. The hardware and software of human cognition, language acquisition and communication as envisaged in Indian spiritual and philosophical expressions are given. In the light of the information and insight obtained as above, the axioms for human cognition / communication are formed, framed and presented. A brain-wave frequency modulation / demodulation model of human cognition, communication and language acquisition and communication process based on Upanishadic expressions, Shaddarsanas and Sabdabrahma Siddhhanta is defined and discussed here. The use of these theories and models and axioms in mind-machine modelling and natural language comprehension branch of artificial intelligence will be put forward and highlighted. (shrink)

This paper empirically raises and examines the question of ‘conceptual control’: To what extent are competent thinkers able to reason properly with new senses of words? This question is crucial for conceptual engineering. This prominently discussed philosophical project seeks to improve our representational devices to help us reason better. It frequently involves giving new senses to familiar words, through normative explanations. Such efforts enhance, rather than reduce, our ability to reason properly, only if competent language users are able to (...) abide by the relevant explanations, in language comprehension and verbal reasoning. This paper examines to what extent we have such ‘conceptual control’ in reasoning with new senses. The paper draws on psycholinguistic findings about polysemy processing to render this question empirically tractable and builds on recent findings from experimental philosophy to address it. The paper identifies a philosophically important gap in thinkers’ control over the key process of stereotypical enrichment and discusses how conceptual engineers can use empirical methods to work around this gap in conceptual control. The paper thus empirically demonstrates the urgency of the question of conceptual control and explains how experimental philosophy can empirically address the question, to render conceptual engineering feasible as an ameliorative enterprise. (shrink)

This study aims to look at the role of the practice of excellence strategies in education in achieving sustainable competitive advantage for the Higher educational institutions of the faculty of Engineering and Information Technology at Al-Azhar University in Gaza, a model, and the study considered the competitive advantage of educational institutions stems from the impact on the level of each student, employee, and the institution. The study was based on the premise that the development of strategies for excellence in (...) education, and its implementation is a vital important prerequisite to achieve sustainable competitive advantage in higher educational institutions. The study followed a systematic exploratory descriptive methodology through review of the theoretical literature, and the adoption of the experience of the Faculty of Engineering and Information Technology at Al-Azhar University in Gaza as a model for its unique experience in the field of excellence in education. The study results showed that the most important are: There is a strong correlation between the level of exercising excellence strategies in education and the achievement of higher educational institutions to the sustainable competitive advantage. The results include a general required number of important sub results on the subject of the model - Faculty of Engineering and Information Technology at Al-Azhar University in Gaza as follows: - The student considered the academic focus of the operation in the development process of the workers’ skills, particularly academics at the university helps to distinguish students and increase the employment rate after graduation. - The existence of consistency in development efforts and quality improvement for all three levels (student, employee, and the university), and this contributes to the Faculty excellence. - The Faculty has been able to achieve competitive advantages by offering excellent services without harming the efficiency, and this alone is a great success because improving service properties requires great investments, which negatively affect the continued institutional development. The study also reached a set of recommendations as follows: - The need to exercise excellence strategies in education, excellence reward at the national level, and those higher educational institutions follow the criteria for measuring the competitive advantages of its institutions always. - There is a need to increase efforts to implement programs of excellence, the allocation of adequate time, reward outstanding efforts as well. There is a necessity for each faculty to achieve competitive advantage and sustainability, using the general philosophies of competitive advantage, but with a different strategically content from what is in the private commercial sector, it reflects the Faculties mission and objectives, depending on making improvements and excellence in processes that ensure the safety of its outputs. As well as the need to find a balance between the work of teaching and research work of the faculty members, this has important implications regarding the criteria used in the process of excellence evaluation. The study recommended the adoption of strategies for excellence in education on a national public policy level mainly in the processes of change in higher education institutions. The need to support the existence of a common understanding of the efforts of excellence to create a general culture that appreciates excellence in faculties and universities. This underlines the need for transparent, fair rewards systems, to encourage innovation in education. The need to conduct a comprehensive surveys on the graduates of faculties and universities including the areas of employment and skills, because that will give accurate indications of the graduates and will help to establish a link to a more precise about the relationship of excellence strategies with the competitive advantages. (shrink)