A process of intelligence gathering begins when a user enters a query into the system. Several objects can match the result of a query with different degrees of relevance. Most systems estimate a numeric value about how well each object matches the query and classifies objects according to this value. Many researches have focused on practices of intelligence gathering. In knowledge engineering, knowledge gathering consists in fiding it from structured and unstructured sources in a way that must (...) represent knowledge in a way that facilitates inference. DOI: 10.13140/RG.2.2.32191.15527. (shrink)

The engineering knowledge research program is part of the larger effort to articulate a philosophy of engineering and an engineering worldview. Engineering knowledge requires a more comprehensive conceptual framework than scientific knowledge. Engineering is not ‘merely’ applied science. Kuhn and Popper established the limits of scientific knowledge. In parallel, the embrace of complementarity and uncertainty in the new physics undermined the scientific concept of observer-independent knowledge. The paradigm shift from the (...) scientific framework to the broader participant engineering framework entails a problem shift. The detached scientific spectator seeks the ‘facts’ of ‘objective’ reality – out there. The participant, embodied in reality, seeks ‘methods’, about how to work in the world. The engineering knowledge research program is recursively enabling. Advances in engineering knowledge are involved in the unfolding of the nature of reality. Newly understood, quantum uncertainty entails that the participant is a natural inquirer. ‘Practical reason’ is concerned with ‘how we should live’– the defining question of morality. The engineering knowledge research program is selective seeking ‘important truths’, ‘important knowledge’, ‘important methods’ that manifest value, and serve the engineering agenda of ‘the construction of the good.’ The importance of engineering knowledge research program is clear in the new STEM curriculum where educators have been challenged to rethink the relation between science and engineering. A 2015 higher education initiative to integrate engineering colleges into liberal arts and sciences colleges has stalled due to the confusion and conflict between the engineering and scientific representations of knowledge. (shrink)

In this paper a Knowledge-Based System (KBS) for determining the appropriate students major according to his/her preferences for sophomore student enrolled in the Faculty of Engineering and Information Technology in Al-Azhar University of Gaza was developed and tested. A set of predefined criterions that is taken into consideration before a sophomore student can select a major is outlined. Such criterion as high school score, score of subject such as Math I, Math II, Electrical Circuit I, and Electronics I (...) taken during the student freshman year, number of credits passed, student cumulative grade point average of freshman year, among others, were then used as input data to KBS. KBS was designed and developed using Simpler Level Five (SL5) Object expert system language. KBS was tested on three generation of sophomore students from the Faculty of Engineering and Information Technology of the Al-Azhar University, Gaza. The results of the evaluation show that the KBS is able to correctly determine the appropriate students major without errors. (shrink)

Conceptual engineering is the method for assessing and improving our concepts. Some have recently claimed that the implementation of such method in the form of ameliorative projects is truth-driven and should thus be epistemically constrained, ultimately at least (Simion 2018; cf. Podosky 2018). This paper challenges that claim on the assumption of a social constructionist analysis of ideologies, and provides an alternative, pragmatic and cognitive framework for determining the legitimacy of ameliorative conceptual projects overall. The upshot is that one (...) should not ameliorate for the sake of truth or knowledge, in the case of ideologies—at least, not primarily. (shrink)

Conceptual engineering means to provide a method to assess and improve our concepts working as cognitive devices. But conceptual engineering still lacks an account of what concepts are (as cognitive devices) and of what engineering is (in the case of cognition). And without such prior understanding of its subject matter, or so it is claimed here, conceptual engineering is bound to remain useless, merely operating as a piecemeal approach, with no overall grip on its target domain. (...) The purpose of this programmatic paper is to overcome this knowledge gap by providing some guidelines for developing the theories of concepts and of cognition that will ground the systematic unified framework needed to effectively implement conceptual engineering as a widely applicable method for the cognitive optimization of our conceptual devices. (shrink)

As engineering applications require management of ever larger volumes of data, ontologies offer the potential to capture, manage, and augment data with the capability for automated reasoning and semantic querying. Unfortunately, considerable barriers hinder wider deployment of ontologies in engineering. Key among these is lack of a shared top-level ontology to unify and organise disparate aspects of the field and coordinate co-development of orthogonal ontologies. As a result, many engineering ontologies are limited to their scope, and functionally (...) difficult to extend or interoperate with other engineering ontologies. This paper demonstrates how the use of a top-level ontology, specifically the Basic Formal Ontology (BFO), greatly facilitates interoperability of multiple engineering-related ontologies. We constructed a system of formal linked ontologies by re-engineering legacy ontologies to be conformant with BFO and developing new BFO-conformant ontologies to capture knowledge in the engineering design, enterprise, human factors, manufacturing, and application domain of additive manufacturing. The resulting Integrated Framework for Additively Manufactured Products (IFAMP), including the body knowledge instantiated on its basis, serve as the basis for a proposed Design with Additive Manufacturing Method (DWAM), which we believe can support the design of innovative products with semantically enhanced ideation tools and enhanced access to application domain knowledge. The method and its facilitation through the ontological framework are demonstrated using a case study in medicine. (shrink)

Defining the purposes of engineering ethics education (EEE) is paramount for the engineering education community, and understanding the purposes of EEE can be a catalyst for actively involving students in the learning process. This chapter presents a conceptual framework for systematically describing and comparing various approaches to the purposes of EEE. Such a framework is inherently embedded with a tension between a normative approach and a pragmatic approach regarding the purposes of EEE. The normative approach focuses on what (...) the purposes of EEE should be, an ‘ideal world’ scenario, given the needs of the engineering profession and of society at large. Conversely, the pragmatic approach starts from the question ‘What can be achieved through educational practice?‘ and results from ‘actual world’ situated outcomes of stakeholder negotiations. The authors’ framework balances these. They – scholars from diverse cultural backgrounds – assert that the purposes of EEE are socially constructed and vary from country to country based on unique historical, political, and cultural contexts. Their framework embraces both the individualistic and holistic aspects of EEE, incorporating perspectives from both Western and non-Western traditions. It identifies six purposes of EEE (knowledge, actions, personal traits, relationships, etc.), aligning these with examples (e.g., moral knowledge, desirable actions, ethical skills or competencies, care ethics, etc.) and theoretical frameworks (moral epistemology, moral psychology, virtue ethics, objects or qualities of relations, etc.). It is problematic and potentially dangerous when engineering educators design ethics-learning activities without critically examining the purposes of these activities and assessing whether these purposes are justified for educating ethically and professionally competent engineers. This chapter provides tools to help avoid such pitfalls. (shrink)

Engineering and technology aim to lead a better life for people. But the meaning of “better” is highly contested in modern democratic societies where different citizens have different cultures and values. Engineers, as one of the citizens in such societies, are also living in multicultural and multi-value settings, and therefore they need to be responsible for such diversity when they engage in technological developments. Therefore, in engineering education, it is necessary to aim at not only acquiring the specialized (...) technological knowledge but also cultivating citizenship. By citizenship, it refers to a set of abilities to communicate and care for people with respect by taking into account different opinions and expertise of others. Nevertheless, this has not been emphasized much in engineering education in Japan. For example, even in the class of engineering ethics, emphasis is placed more on the acquisition of textbook-based knowledge and virtue of problem cases, and less on abilities to discuss freely and gently. Then, in general education of NIT we have conducted a dialogue-based educational program where learners/students ask questions, listen together and discuss with others. This program is designed based upon so-called Philosophy for/with Children (P4C). Matthew Lipman, one of the founders of P4C, defined the primary aim of P4C as multidimensional- thinking: critical thinking, creative thinking, and caring thinking. In addition, this multidimensional- thinking may, according to many P4C scholars, have a potential of creating active citizenry. The discussion by P4C has three characteristics as follows: 1) People make a circle in the classroom and create a space where students can feel an emotional and intellectual “safety”. 2)Questions being discussed is proposed by students themselves based on their interests, not by teachers 3) Rather than rushing to reach a conclusion, students are asked to concentrate on listening to the differences between each other. This paper begins by explaining what P4C is and why/how P4C is suitable for citizenship education, and then the following sections show our P4C classes in NIT (Tokyo and Ube) and learner's responses. Finally, we claim that the “community of inquiry” created through P4C can prevent the “self- righteousness” of engineers. (shrink)

Problem-Based Learning has become an increasingly popular instructional method for a variety of disciplines at all levels. Many studies and meta-analyses of these studies have shown the efficacy of this method for developing knowledge and skills. I adopted this method for teaching Engineering Ethics at Carnegie Mellon University, which has as its main course objectives the development of moral reasoning skills, as well as collaboration and communication skills, with special attention given to ethical dilemmas that may arise in (...) the normal course of an engineer’s professional career. In the most recent iteration of the course, I used the Engineering and Science Issues Test as a pretest and posttest to test the development of my students’ moral reasoning skills over the course of the semester. Based on the results of these tests, I argue that the students in my Engineering Ethics course did in fact significantly develop their moral reasoning skills. (shrink)

We describe a method, based on Jennifer Nado’s proposal for classification procedures as targets of conceptual engineering, that implements such procedures by prompting a large language model. We apply this method, using data from the Wikidata knowledge graph, to evaluate stipulative definitions related to two paradigmatic conceptual engineering projects: the International Astronomical Union’s redefinition of PLANET and Haslanger’s ameliorative analysis of WOMAN. Our results show that classification procedures built using our approach can exhibit good classification performance and, (...) through the generation of rationales for their classifications, can contribute to the identification of issues in either the definitions or the data against which they are being evaluated. We consider objections to this method, and discuss implications of this work for three aspects of theory and practice of conceptual engineering: the definition of its targets, empirical methods for their investigation, and their practical roles. The data and code used for our experiments, together with the experimental results, are available in a Github repository. . (shrink)

Problem-Based Learning has become an increasingly popular instructional method for a variety of disciplines at all levels. Many studies and meta-analyses of these studies have shown the efficacy of this method for developing knowledge and skills. I adopted this method for teaching Engineering Ethics at Carnegie Mellon University, which has as its main course objectives the development of moral reasoning skills, as well as collaboration and communication skills, with special attention given to ethical dilemmas that may arise in (...) the normal course of an engineer’s professional career. In the most recent iteration of the course, I used the Engineering and Science Issues Test as a pretest and posttest to test the development of my students’ moral reasoning skills over the course of the semester. Based on the results of these tests, I argue that the students in my Engineering Ethics course did in fact significantly develop their moral reasoning skills. (shrink)

This paper begins by raising a puzzle about what function our use of the word ‘rational’ could serve. To solve the puzzle, I introduce a view I call Epistemic Communism: we use epistemic evaluations to promote coordination among our basic belief-forming rules, and the function of this is to make the acquisition of knowledge by testimony more efficient.

Philosophical investigation in synthetic biology has focused on the knowledge-seeking questions pursued, the kind of engineering techniques used, and on the ethical impact of the products produced. However, little work has been done to investigate the processes by which these epistemological, metaphysical, and ethical forms of inquiry arise in the course of synthetic biology research. An attempt at this work relying on a particular area of synthetic biology will be the aim of this chapter. I focus on the (...) reengineering of metabolic pathways through the manipulation and construction of small DNA-based devices and systems synthetic biology. Rather than focusing on the engineered products or ethical principles that result, I will investigate the processes by which these arise. As such, the attention will be directed to the activities of practitioners, their manipulation of tools, and the use they make of techniques to construct new metabolic devices. Using a science-in-practice approach, I investigate problems at the intersection of science, philosophy of science, and sociology of science. I consider how practitioners within this area of synthetic biology reconfigure biological understanding and ethical categories through active modelling and manipulation of known functional parts, biological pathways for use in the design of microbial machines to solve problems in medicine, technology, and the environment. We might describe this kind of problem-solving as relying on what Helen Longino referred to as “social cognition” or the type of scientific work done within what Hasok Chang calls “systems of practice”. My aim in this chapter will be to investigate the relationship that holds between systems of practice within metabolic engineering research and social cognition. I will attempt to show how knowledge and normative valuation are generated from this particular network of practitioners. In doing so, I suggest that the social nature of scientific inquiry is ineliminable to both knowledge acquisition and ethical evaluations. (shrink)

Why did such highly abstract ideas as truth, knowledge, or justice become so important to us? What was the point of coming to think in these terms? This book presents a philosophical method designed to answer such questions: the method of pragmatic genealogy. Pragmatic genealogies are partly fictional, partly historical narratives exploring what might have driven us to develop certain ideas in order to discover what these do for us. The book uncovers an under-appreciated tradition of pragmatic genealogy which (...) cuts across the analytic-continental divide, running from the state-of-nature stories of David Hume and the early genealogies of Friedrich Nietzsche to recent work in analytic philosophy by Edward Craig, Bernard Williams, and Miranda Fricker. However, these genealogies combine fictionalizing and historicizing in ways that even philosophers sympathetic to the use of state-of-nature fictions or real history have found puzzling. To make sense of why both fictionalizing and historicizing are called for, the book offers a systematic account of pragmatic genealogies as dynamic models serving to reverse-engineer the points of ideas in relation not only to near-universal human needs, but also to socio-historically situated needs. This allows the method to offer us explanation without reduction and to help us understand what led our ideas to shed the traces of their practical origins. Far from being normatively inert, moreover, pragmatic genealogy can affect the space of reasons, guiding attempts to improve our conceptual repertoire by helping us determine whether and when our ideas are worth having. (shrink)

According to a common objection to epistemological naturalism, no empirical, scientific theory of knowledge can be normative in the way epistemological theories need to be. In response, such naturalists as W.V. Quine have claimed naturalized epistemology can be normative by emulating engineering disciplines and addressing the relations of causal efficacy between our cognitive means and ends. This paper evaluates that "engineering reply" and finds it a mixed success. Based on consideration of what it might mean to call (...) a theory "normative," seven versions of the normativity objection to epistemological naturalism are formulated. The engineering reply alone is sufficient to answer only the four least sophisticated versions. To answer the others, naturalists must draw on more resources than their engineering reply alone provides. (shrink)

Software application ontologies have the potential to become the keystone in state-of-the-art information management techniques. It is expected that these ontologies will support the sort of reasoning power required to navigate large and complex terminologies correctly and efficiently. Yet, there is one problem in particular that continues to stand in our way. As these terminological structures increase in size and complexity, and the drive to integrate them inevitably swells, it is clear that the level of consistency required for such navigation (...) will become correspondingly difficult to maintain. While descriptive semantic representations are certainly a necessary component to any adequate ontology-based system, so long as ontology engineers rely solely on semantic information, without a sound ontological theory informing their modeling decisions, this goal will surely remain out of reach. In this paper we describe how Language and Computing nv (L&C), along with The Institute for Formal Ontology and Medical Information Sciences (IFOMIS), are working towards developing and implementing just such a theory, combining the open software architecture of L&C’s LinkSuiteTM with the philosophical rigor of IFOMIS’s Basic Formal Ontology. In this way we aim to move beyond the more or less simple controlled vocabularies that have dominated the industry to date. (shrink)

This paper applies a virtue epistemology approach to using the Internet, as to improve our information-seeking behaviours. Virtue epistemology focusses on the cognitive character of agents and is less concerned with the nature of truth and epistemic justification as compared to traditional analytic epistemology. Due to this focus on cognitive character and agency, it is a fruitful but underexplored approach to using the Internet in an epistemically desirable way. Thus, the central question in this paper is: How to use the (...) Internet in an epistemically virtuous way? Using the work of Jason Baehr, it starts by outlining nine intellectual or epistemic virtues: curiosity, intellectual autonomy, intellectual humility, attentiveness, intellectual carefulness, intellectual thoroughness, open-mindedness, intellectual courage and intellectual tenacity. It then explores how we should deploy these virtues and avoid the corresponding vices when interacting with the Internet, particularly search engines. Whilst an epistemically virtuous use of the Internet will not guarantee that one will acquire true beliefs, understanding or even knowledge, it will strongly improve one’s information-seeking behaviours. The paper ends with arguing that teaching and assessing online intellectual virtues should be part of school and university curricula, perhaps embedded in critical thinking courses, or even better, as individual units. (shrink)

Abstract: Background: In spite of the fact that computers continue to improve in speed and functions operation, they remain complex to use. Problems frequently happen, and it is hard to resolve or find solutions for them. This paper outlines the significance and feasibility of building a desktop PC problems diagnosis system. The system gathers problem symptoms from users’ desktops, rather than the user describes his/her problems to primary search engines. It automatically searches global databases of problem symptoms and solutions, and (...) also allows ordinary users to contribute exact problem reports in a structured manner. Objectives: The main goal of this Knowledge Based System is to get the suitable problem desktop PC symptoms and the correct way to solve the errors. Methods: In this paper the design of the proposed Knowledge Based System which was produced to help users of desktop PC in knowing many of the problems and error such as : Power supply problems, CPU errors, RAM dumping error, hard disk errors and bad sectors and suddenly restarting PC. The proposed Knowledge Based System presents an overview about desktop PC hardware errors are given, the cause of fault are outlined and the solution to the problems whenever possible is given out. CLIPS Knowledge Based System language was used for designing and implementing the proposed expert system. Results: The proposed PC desktop troubleshooting Knowledge Based System was evaluated by IT students and they were satisfied with its performance. (shrink)

The paper assesses Knowledge Management Maturity(KMM) in the universities to determine the impact of knowledge management on performance excellence. This study was applied on Al-Azhar University and Al-Quds Open University in Gaza strip, Palestine. This paper depends on Asian productivity organization model that used to assess KMM. Second dimension which assess performance excellence was developed by the authors. The controlled sample was (610). Several statistical tools were used for data analysis and hypotheses testing, including reliability Correlation using Cronbach’s (...) alpha, “ANOVA”, Simple Linear Regression and Step Wise Regression. The overall findings of the current study suggest that KMM is suitable for measuring performance excellence. KMM assessment shows that both universities maturity level is in level three. Findings also support the main hypothesis and it is sub- hypotheses. The most important factors effecting performance excellence are: Processes, KM leadership, People, KM Outcomes. Furthermore the current study is unique by the virtue of its nature, scope and way of implied investigation, as it is the first comparative study in the universities of Palestine explores the status of KMM using the Asian productivity Model. (shrink)

The internet has considerably changed epistemic practices in science as well as in everyday life. Apparently, this technology allows more and more people to get access to a huge amount of information. Some people even claim that the internet leads to a democratization of knowledge. In the following text, we will analyze this statement. In particular, we will focus on a potential change in epistemic structure. Does the internet change our common epistemic practice to rely on expert opinions? Does (...) it alter or even undermine the division of epistemic labor? The epistemological framework of our investigation is a naturalist-pragmatist approach to knowledge. We take it that the internet generates a new environment to which people seeking information must adapt. How can they, and how should they, expand their repertory of social markers to continue the venture of filtering, and so make use of the possibilities the internet apparently provides? To find answers to these questions we will take a closer look at two case studies. The first example is about the internet platform WikiLeaks that allows so-called whistle-blowers to anonymously distribute their information. The second case study is about the search engine Google and the problem of personalized searches. Both instances confront a knowledge-seeking individual with particular difficulties which are based on the apparent anonymity of the information distributor. Are there ways for the individual to cope with this problem and to make use of her social markers in this context nonetheless? (shrink)

This contribution examines two radically different explanations of our phenomenal intuitions, one reductive and one strongly non-reductive, and identifies two germane ideas that could benefit many other theories of consciousness. Firstly, the ability of sophisticated agent architectures with a purely physical implementation to support certain functional forms of qualia or proto-qualia appears to entail the possibility of machine consciousness with qualia, not only for reductive theories but also for the nonreductive ones that regard consciousness as ubiquitous in Nature. Secondly, analysis (...) of introspective psychological material seems to hint that, under the threshold of our ordinary waking awareness, there exist further ‘submerged’ or ‘subliminal’ layers of consciousness which constitute a hidden foundation and support and another source of our phenomenal intuitions. These ‘submerged’ layers might help explain certain puzzling phenomena concerning subliminal perception, such as the apparently ‘unconscious’ multisensory integration and learning of subliminal stimuli. (shrink)

There is no doubt that custard apple diseases are among the important reasons that destroy the Custard Apple plant and its agricultural crops. This leads to obvious damage to these plants and they become inedible. Discovering these diseases is a good step to provide the appropriate and correct treatment. Determining the treatment with high accuracy depends on the method used to correctly diagnose the disease, expert systems can greatly help in avoiding damage to these plants. The expert system correctly diagnoses (...) Custard Apple disease to make it easier for farmers to find the right treatment based on the appropriate diagnosis. Objectives: A specialized syllable language system was established for the diagnosis of Custard Apple plant disease. (shrink)

In this paper I distinguish three kinds of kinds: traditional philosophical kinds such as truth, knowledge, and causation; natural science kinds such as spin, charge and mass; and social kinds such as class, poverty, and marriage. The three-fold taxonomy I work with represents an idealised abstraction from the wide variety of kinds that there are and the messy phenomena that underlie them. However, the kinds I identify are discrete, and the three-fold taxonomy is useful when it comes to understanding (...) claims about the normativity, scope, and implementation of conceptual engineering. In particular it reveals: first, that conceptual engineering in a broad sense is not distinctively normative; but second, that there is a distinctive normativity present in conceptual engineering in the narrow sense of amelioration; third, that conceptual engineering in the narrow sense of amelioration is only possible for terms that refer to kinds whose grounds we can change; and fourth, that the amelioration of such kind terms can be brought about as a result of changing the grounds of those kinds. The overall aim is to draw attention to the differences between kinds of kinds to make sense of the diverse and often conflicting claims in the conceptual engineering literature, both from its proponents and from its detractors. The hope is that paying attention to the differences between kinds of kinds will provide a better understanding of the landscape. (shrink)

Abstract: The Knowledge-Based System for Diagnosing Breast Cancer aims to support medical students in enhancing their education regarding diagnosis and counseling. The system facilitates the analysis of biopsy images under a microscope, determination of tumor type, selection of appropriate treatment methods, and identification of disease-related questions. According to the Ministry of Health's annual report in Gaza, there were 7,069 cases of breast cancer between 2009 and 2014, with 1,502 cases reported in 2014. In an era dominated by visual information, (...) where 65% of the population are visual learners, the Knowledge-Based System serves as an effective tool to aid long-term information retention by utilizing visual and textual resources. The system features a user-friendly interface, enabling students to diagnose the disease and expand their understanding. Furthermore, it can be accessed via smartphones. The Knowledge-Based System comprises three primary components: Firstly, it provides specific patient-oriented questions to familiarize students with the questioning process. Secondly, it facilitates the analysis of biopsy sample images to determine their integrity and identify potential infections. Lastly, the system incorporates animated videos illustrating various approaches for treating breast cancer. (shrink)

This article offers an account and defence of constructionism, both as a metaphilosophical approach and as a philosophical methodology, with references to the so-called maker's knowledge tradition. Its main thesis is that Plato's “user's knowledge” tradition should be complemented, if not replaced, by a constructionist approach to philosophical problems in general and to knowledge in particular. Epistemic agents know something when they are able to build (reproduce, simulate, model, construct, etc.) that something and plug the obtained information (...) into the correct network of relations that account for it. Their epistemic expertise increases with the scope and depth of the questions that they are able to ask and answer. Thus, constructionism deprioritises mimetic, passive, and declarative knowledge that something is the case, in favour of poietic, interactive, and practical knowledge of something being the case. Metaphilosophically, constructionism suggests adding conceptual engineering to conceptual analysis as a fundamental method. (shrink)

This study aims to use the Asian knowledge model “APO” as a determinant for performance excellence in universities and identifying the most effecting factors on it. This study was applied on Al-Azhar University in Gaza strip. The result of the study showed that (APO) model is valid as a measure and there are four dimensions in the model affecting significantly more than the others (university processes, KM leadership, personnel, KM outputs). Furthermore, performance excellence produced though modernizing the means of (...) education, curriculum development, technology and flexibility in the organizational structure. The study recommends expanding the usage of (APO) model, enhancing the role of knowledge leadership, technology, organizational flexibility, sharing culture and incentive systems that encouraging innovation. (shrink)

We present a preliminary high-level formal theory, grounded on knowledge representation techniques and foundational ontologies, for the uniform and integrated representation of the different kinds of (quali- tative and quantitative) knowledge involved in the designing process. We discuss the conceptual nature of engineering design by individuating and analyzing the involved notions. These notions are then formally charac- terized by extending the DOLCE foundational ontology. Our ultimate purpose is twofold: (i) to contribute to foundational issues of design; and (...) (ii) to support the development of advanced modelling systems for (qualitative and quantitative) representation of design knowledge. (shrink)

Abstract: Colon cancer is a prevalent and life-threatening disease, necessitating accurate and timely diagnosis for effective treatment and improved patient outcomes. This research paper presents the development of a knowledge-based system for diagnosing colon cancer using the CLIPS language. Knowledge-based systems offer the potential to assist healthcare professionals in making informed diagnoses by leveraging expert knowledge and reasoning mechanisms. The methodology involves acquiring and structuring medical knowledge specific to colon cancer, followed by the implementation of a (...) knowledge- based system using CLIPS. The system's design integrates relevant medical databases and employs advanced reasoning mechanisms to facilitate accurate diagnosis. Evaluation results demonstrate the system's effectiveness, with high accuracy and sensitivity rates compared to existing methods. The findings highlight the potential of knowledge-based systems in improving clinical practice and patient care. The research contributes to the growing field of medical informatics by demonstrating the feasibility and effectiveness of CLIPS-based knowledge systems for colon cancer diagnosis. Future research can focus on enhancing system performance and expanding its scope to encompass other types of cancer diagnoses. (shrink)

In his 1955 essay "Meaning and synonymy in natural languages", Rudolf Carnap presents a thought experiment wherein an investigator provides a hypothetical robot with a definition of a concept together with a description of an individual, and then asks the robot if the individual is in the extension of the concept. In this work, we show how to realize Carnap's Robot through knowledge probing of an large language model (LLM), and argue that this provides a useful cognitive tool for (...) conceptual engineers to compare the extension of a proposed concept definition to the extensional knowledge represented as facts in a given knowledge base, providing a possible solution to the implementation problem in conceptual engineering. (shrink)

Canada, as one of the three Allied nations collaborating on atomic energy development during the Second World War, had an early start in applying its new knowledge and defining a new profession. Owing to postwar secrecy and distinct national aims for the field, nuclear engineering was shaped uniquely by the Canadian context. Alone among the postwar powers, Canadian exploration of atomic energy eschewed military applications; the occupation emerged within a governmental monopoly; the intellectual content of the discipline was (...) influenced by its early practitioners, administrators, scarce resources, and university niches; and a self-recognized profession coalesced later than did its American and British counterparts. This paper argues that the history of the emergence of Canadian nuclear engineers exemplifies unusually strong shaping of technical expertise by political and cultural context. (shrink)

From the Scientific Revolution to the present era, the natural sciences have developed remarkably and recorded colossal success in different areas such as genetic engineering, cloning, hybrid technology, health and food technologies, space travel, audio-visual technology, among others. These evidences are indications of the growth of scientific knowledge. Accordingly, this paper raises the question of what is responsible for the growth of scientific knowledge. Inherent in this question is the pool of diverse conceptions of what the nature (...) and method of science is. Consequently, some significant contours in the construct of the problem of demarcation will be imported into this discourse as a means of assembling some pivotal conceptions of the growth of scientific knowledge. With this, the paper aims to consider Karl Popper’s fundamental conception of the growth of scientific knowledge and its associated criticisms, and from it, attempt to respond to the question of what is responsible for the growth of scientific knowledge. This will help to eliminate the confusion and complications surrounding the growth of scientific knowledge. (shrink)

The premise of biological modularity is an ontological claim that appears to come out of practice. We understand that the biological world is modular because we can manipulate different parts of organisms in ways that would only work if there were discrete parts that were interchangeable. This is the foundation of the BioBrick assembly method widely used in synthetic biology. It is one of a number of methods that allows practitioners to construct and reconstruct biological pathways and devices using DNA (...) libraries of standardized parts with known functions. In this paper, we investigate how the practice of synthetic biology reconfigures biological understanding of the key concepts of modularity and evolvability. We illustrate how this practice approach takes engineering knowledge and uses it to try to understand biological organization by showing how the construction of functional parts and processes can be used in synthetic experimental evolution. We introduce a new approach within synthetic biology that uses the premise of a parts-based ontology together with that of organismal self-organization to optimize orthogonal metabolic pathways in E. coli. We then use this and other examples to help characterize semisynthetic categories of modularity, parthood, and evolvability within the discipline. (shrink)

Laboratory activities play a crucial role in the conceptual understanding of the theoretical aspects of physics. Traditional guided lab activities emphasize a teacher-centric pedagogical approach in which learners are merely passive recipients of the content knowledge as delivered by the teacher. The authors in their professional journey at engineering institutions were also guided by the traditional laboratory approach in the teaching and learning process inside the physics laboratory. During our professional journey at engineering institutions, we felt that (...) students had difficulty demonstrating the science process skills and employing the theoretical aspects in real-world situations. The primary objective of this research was to explore the lab activities inside the physics laboratory at diploma engineering institutions in the Kathmandu district of Nepal. For this purpose, an ethnographic method was employed in which multiple laboratory sessions were observed, and open-ended and unstructured interviews were conducted with the research participants at different locations through in-person and online processes. In addition, social constructivist learning theory was utilized in this research process. The findings lead to the conclusion that traditional guided laboratory activities prevailed inside the physics lab of those institutions under study. -/- . (shrink)

Diagnosing flatulence involves a thorough assessment of an individual's symptoms, medical history, and, if necessary, the use of diagnostic tests. Healthcare providers gather information about the patient's medical background and conduct a physical examination to identify any signs of gastrointestinal issues. Dietary habits are evaluated, and potential triggers are identified through an elimination diet. Diagnostic tests such as breath tests, stool analysis, or imaging studies may be performed to further investigate the underlying causes of excessive flatulence. Accurate diagnosis is crucial (...) for effective management and treatment of flatulence, enabling individuals to gain control over their symptoms and address any underlying conditions. (shrink)

A newborn baby is an infant within the first 28 days of birth. Diagnosis and treatment of infant diseases require specialized medical resources and expert knowledge. However, there is a shortage of such professionals globally, particularly in low-income countries. To address this challenge, a knowledge-based system was designed to aid in the diagnosis and treatment of neonatal diseases. The system utilizes both machine learning and health expert knowledge, and a hybrid data mining process model was used to (...) extract knowledge from a clinical dataset. The PART algorithm achieved the highest performance result with 98.06% accuracy under 10-fold cross-validation, and the generated rules were used to develop the knowledge-based system. The system achieved 90.9% accuracy in system performance testing and 89.2% in user acceptance testing, and is intended to serve as an assistant tool for healthcare experts. (shrink)

Concept representation is still an open problem in the field of ontology engineering and, more generally, of knowledge representation. In particular, the issue of representing “non classical” concepts, i.e. concepts that cannot be defined in terms of necessary and sufficient conditions, remains unresolved. In this paper we review empirical evidence from cognitive psychology, according to which concept representation is not a unitary phenomenon. On this basis, we sketch some proposals for concept representation, taking into account suggestions from psychological (...) research. In particular, it seems that human beings employ both prototype-based and exemplar-based representations in order to represent non classical concepts. We suggest that a similar, hybrid prototype-exemplar based approach could also prove useful in the field of knowledge representation technology. Finally, we propose conceptual spaces as a suitable framework for developing some aspects of this proposal. (shrink)

Whether the hands-on experience of creating inventions can promote Students’ interest in pursuing a science, technology, engineering, and mathematics (STEM) career has not been extensively studied. In a quantitative study, we drew on the attitude-behavior-outcome framework to explore the correlates between hands-on making attitude, epistemic curiosities, and career interest. This study targeted students who joined the selection competition for participating in the International Exhibition of Young Inventors (IEYI) in Taiwan. The objective of the invention exhibition is to encourage young (...) students to make innovative projects by applying STEM knowledge and collaborative design. We collected 220 valid data from participants in the 2021 Taiwan IEYI selection competition and conducted a confirmatory factor analysis and structural equation modeling to test the hypotheses. Results indicated that: (1) hands-on making attitude was positively related to two types of epistemic curiosity; (2) interest-type epistemic curiosity (IEC) and deprivation-type epistemic curiosity (DEC) were positively associated with STEM career interest; additionally, DEC had a higher coefficient on STEM career interest than IEC; (3) both types of EC had a mediating role between hands-on making attitude and STEM career interest. It is expected that encouraging students to participate in invention exhibition competitions can raise both types of EC and increase their interest in pursuing STEM careers. (shrink)

Types are fundamental for conceptual modeling and knowledge representation, being an essential construct in all major modeling languages in these fields. Despite that, from an ontological and cognitive point of view, there has been a lack of theoretical support for precisely defining a consensual view on types. As a consequence, there has been a lack of precise methodological support for users when choosing the best way to model general terms representing types that appear in a domain, and for building (...) sound taxonomic structures involving them. For over a decade now, a community of researchers has contributed to the development of the Unified Foundational Ontology (UFO) - aimed at providing foundations for all major conceptual modeling constructs. At the core of this enterprise, there has been a theory of types specially designed to address these issues. This theory is ontologically well- founded, psychologically informed, and formally characterized. These results have led to the development of a Conceptual Modelling language dubbed OntoUML, reflecting the ontological micro-theories comprising UFO. Over the years, UFO and OntoUML have been successfully employed on conceptual model design in a variety of domains including academic, industrial, and governmental settings. These experiences exposed improvement opportunities for both the OntoUML language and its underlying theory, UFO. In this paper, we revise the theory of types in UFO in response to empirical evidence. The new version of this theory shows that many of OntoUML’s meta-types (e.g. kind, role, phase, mixin) should be considered not as restricted to substantial types but instead should be applied to model endurant types in general, including relator types, quality types, and mode types. We also contribute with a formal characterization of this fragment of the theory, which is then used to advance a new metamodel for OntoUML (termed OntoUML 2). To demonstrate that the benefits of this approach are extended beyond OntoUML, the proposed formal theory is then employed to support the definition of UFO-based lightweight Semantic Web ontologies with ontological constraint checking in OWL. Additionally, we report on empirical evidence from the literature, mainly from cognitive psychology but also from linguistics, supporting some of the key claims made by this theory. Finally, we propose a computational support for this updated metamodel. (shrink)

To demarcate the limits of experimental knowledge, we probe the limits of what might be called an experiment. By appeal to examples of scientific practice from astrophysics and analogue gravity, we demonstrate that the reliability of knowledge regarding certain phenomena gained from an experiment is not circumscribed by the manipulability or accessibility of the target phenomena. Rather, the limits of experimental knowledge are set by the extent to which strategies for what we call ‘inductive triangulation’ are available: (...) that is, the validation of the mode of inductive reasoning involved in the source-target inference via appeal to one or more distinct and independent modes of inductive reasoning. When such strategies are able to partially mitigate reasonable doubt, we can take a theory regarding the phenomena to be well supported by experiment. When such strategies are able to fully mitigate reasonable doubt, we can take a theory regarding the phenomena to be established by experiment. There are good reasons to expect the next generation of analogue experiments to provide genuine knowledge of unmanipulable and inaccessible phenomena such that the relevant theories can be understood as well supported. This article is part of a discussion meeting issue ‘The next generation of analogue gravity experiments’. (shrink)

We discuss the role of perceptron (or threshold) connectives in the context of Description Logic, and in particular their possible use as a bridge between statistical learning of models from data and logical reasoning over knowledge bases. We prove that such connectives can be added to the language of most forms of Description Logic without increasing the complexity of the corresponding inference problem. We show, with a practical example over the Gene Ontology, how even simple instances of perceptron connectives (...) are expressive enough to represent learned, complex concepts derived from real use cases. This opens up the possibility to import concepts learnt from data into existing ontologies. (shrink)

This is an explanation of a possible new insight into the halting problem provided in the language of software engineering. Technical computer science terms are explained using software engineering terms. No knowledge of the halting problem is required. -/- It is based on fully operational software executed in the x86utm operating system. The x86utm operating system (based on an excellent open source x86 emulator) was created to study the details of the halting problem proof counter-examples at the (...) much higher level of abstraction of C/x86. (shrink)

The aim of this study was to identify the obstacles facing the application of knowledge management and its impact on performance at Palestine Technical University-Kadoorei from the point of view of employees and to detect the differences between the average views of the study sample on the subject of the study according to some variables such as (gender, nature of work, Education Level, specialization, years of experience). The study followed the descriptive analytical method and the questionnaire as a tool (...) for study. It was distributed to 74 employees. After the questionnaire was distributed, the data was collected and coded and entered into the computer and processed statistically using the SPSS program. The study found that the percentage of approval of the obstacles to the application of knowledge management at Palestine Technical University-Kadoorei differed between few and large, and the relative weight of the axis was complete (68.2). The degree of awareness of the workers of the reality of performance excellence at the University of Palestine Technical-Kadoorei was between medium and very large. There is an impact of the constraints of the application of knowledge management on performance excellence at Palestine Technical University-Kadoorei. In light of the results of the previous study, the researchers recommended that the importance of knowledge management should be taken into account in order to raise the university's reputation and reputation at home and abroad and improve its services to students and the local community. And to promote the exchange of experiences and knowledge with local, regional and international universities in order to enhance the knowledge and preserve it and provide modern and sophisticated scientific techniques and use them in administrative and academic work at the university. (shrink)

In this paper I describe a novel application of contemplative techniques to software engineering with the goal of augmenting the intellectual capabilities of knowledge workers within the field in four areas: flexibility, attention, creativity, and trust. The augmentation of software engineers’ intellectual capabilities is proposed as a third complement to the traditional focus of methodologies on the process and environmental factors of the software development endeavor. I argue that these capabilities have been shown to be open to improvement (...) through the practices traditionally used in spiritual traditions, but now used increasingly in other fields of knowledge work, such as in the medical profession and the education field. Historically, the intellectual capabilities of software engineers have been treated as a given within any particular software development effort. This is argued to be an aspect ripe for inclusion within software development methodologies. (shrink)

This article explores how institutions play a pivotal role in shaping collective knowledge and ignorance concerning the human–animal relationship. It contends that institutions, by obstructing or facilitating the production and dissemination of knowledge, significantly influence societal perceptions of animals, and in turn, our treatment of them. Such epistemic processes lead to speciesist beliefs and behaviour, which I assume to be morally problematic. The discussion centres on the obstruction of collective moral knowledge related to the human–animal relationship. Specifically, (...) my article identifies various ‘corrupting conditions’ within institutions which obstruct agents’ epistemic functioning, and thereby, contribute to collective moral ignorance and consequent speciesist moral wrongdoings, including: (1) Lack of anti-speciesist alternatives or behaviours; (2) derogation of anti-speciesist processes or behaviours; (3) valorization of speciesist processes or behaviour; (4) re-branding of undesirable epistemic processes as commendable; (5) conditions increasing the costs of anti-speciesist inquiry; (6) conditions fostering indifference about animal issues; (7) policies mandating speciesist commitments. The article discusses how these conditions influence epistemic processes in detail. Furthermore, using the production of animal products as a case study, the article illustrates how political institutions, legal institutions, search engines and media, perpetuate moral ignorance regarding animals. It argues that these institutional corrupting conditions normalize speciesism, encouraging the widespread adoption of speciesist beliefs. I conclude that it is necessary to improve institutional epistemic environments to facilitate successful animal advocacy efforts, including widespread moral knowledge about animals and voting support for animal protection policies. The article lays the groundwork for discussing the epistemic responsibilities institutions bear in shaping perceptions of the human–animal relationship. (shrink)

In this paper, we assess the possibility of a critical knowledge of technology. In the case of facial recognition systems, 'FRS', we argue that behaviorism underlies this technology, and analyze the debate about behaviorism to show the lack of consensus about its theoretical foundations. In particular we analyze the structure of knowledge generated by FRS as affected by a technological behaviorism. Our last point is a suggestion to use the concept of dasiacritical knowledgepsila, which we borrow from Ladriere, (...) to question and challenge the technological finalities and the foundational scientific theory underlying FRS. (shrink)

The use of highly abstract mathematical frameworks is essential for building the sort of theoretical foundation for semantic integration needed to bring it to the level of a genuine engineering discipline. At the same time, much of the work that has been done by means of these frameworks assumes a certain amount of background knowledge in mathematics that a lot of people working in ontology, even at a fairly high theoretical level, lack. The major purpose of this short (...) paper is provide a (comparatively) simple model of semantic integration that remains within the friendlier confines of first-order languages and their usual classical semantics and logic. (shrink)

Conceptual engineering is the practice of revising concepts to improve how people talk and think. Its ability to improve talk and thought ultimately hinges on the successful dissemination of desired conceptual changes. Unfortunately, the field has been slow to develop methods to directly test what barriers stand in the way of propagation and what methods will most effectively propagate desired conceptual change. In order to test such questions, this paper introduces the masked time-lagged method. The masked time-lagged method tests (...) people's conceptual understanding at two different points in time without their knowledge of being tested, allowing us to measure conceptual revision in action. Using a masked time-lagged design on a content internalist framework, we attempted to revise PLANET and DINOSAUR in online participants to match experts' concepts. We successfully revised PLANET but not DINOSAUR, demonstrating some of the difficulties conceptual engineers face. Nonetheless, this paper provides conceptual engineers, regardless of framework, with the tools to tackle questions related to implementation empirically and head-on. (shrink)

Conceptual Analysis and Design (mCAD) is an information and cognitive technology for knowledge and systems engineering. A conceptual system for a complex knowledge domain contains thousands of linked concepts, necessary in the engineering and management of big and complex systems. Naturally evolved conceptual systems usually contain conceptual gaps and have multiple logical fallacies. mCAD addresses these issues by axiomatic deduction of concepts. This article is a concise overview of Conceptual Analysis and Design, covering its foundations, technological (...) aspects, and notable applications. (shrink)

The paper is a contribution to formal ontology. It seeks to use topological means in order to derive ontological laws pertaining to the boundaries and interiors of wholes, to relations of contact and connectedness, to the concepts of surface, point, neighbourhood, and so on. The basis of the theory is mereology, the formal theory of part and whole, a theory which is shown to have a number of advantages, for ontological purposes, over standard treatments of topology in set-theoretic terms. One (...) central goal of the paper is to provide a rigorous formulation of Brentano's thesis to the effect that a boundary can exist as a matter of necessity only as part of a whole of higher dimension which it is the boundary of. It concludes with a brief survey of current applications of mereotopology in areas such as natural-language analysis, geographic information systems, machine vision, naive physics, and database and knowledge engineering. (shrink)