The study, design and development of a low-cost digital braille printer is boarded with a transdisciplinary approach. The main challenge was focused on reducing significantly the high cost of this type of printers and their printing services. This context is aggravated with the low commercialization of these products in the country, a factor that makes the access of these tools -that are essential to much of the low and middle sectors of the Argentine social structure- even more difficult. An (...) interdisciplinary group of teachers, graduates and students of the careers of industrial design and informatics degree from the National University of La Plata, developed the design and prototype of a braille printer. The work was carried out according to the principles of Gandhian Engineering, based on the reuse of ink-jet printers. The project consists of the design, development and generation of a low-cost Braille printer, produced locally, which prioritizes the use of nationally manufactured components for assembly. To achieve this, an electronic and electromechanical system was designed and manufactured to adapt any Inkjet printer to the objectives of the project, enabling the recycling of obsolete printers. This means, it is proposed to resolve through the use of text printers, applying technical knowledge of computer science and industrial design, to adapt the technological components to the Braille lexicon printer. They also developed, on the one hand, software that controls the printer and allows its use in a simple and accessible way. On the other hand, the hardware and external components were adapted with 3D printing technology and thermoforming, producing a housing that contains the entire printer. Finally, a systematization of the assembly process of the printer prototype was carried out, making it possible to replicate it. Using methodologies of Gandhian Design, a prototype and two alternative proposals of carcasses were obtained. The main objective, which guided this work, was that blind people can access low-cost braille printers promoting by this a favorable impact on the cultural development of their daily lives. (shrink)

With the emergence of quantum technologies such as quantum computing, quantum communications, and quantum sensing, new potential has emerged for smart manufacturing and Industry 4.0. These technologies, however, present ethical concerns that must be addressed in order to ensure they are developed and used responsibly. This article outlines some of the ethical challenges that quantum technologies may raise for Industry 4.0 and presents the value sensitive design methodology as a strategy for ethics-by-design of quantum computing in Industry 4.0. (...) This research further investigates the potential ethical difficulties that may come from the use of quantum technologies in Industry 4.0, such as concerns about privacy, security, accountability, and the influence of these technologies on workers and society as a whole. The article argues, based on current literature, that these issues necessitate a proactive and comprehensive approach to ethics-by-design. (shrink)

Manufacturing and industry practices are undergoing an unprecedented revolution as a consequence of the convergence of emerging technologies such as artificial intelligence, robotics, cloud computing, virtual and augmented reality, among others. This fourth industrial revolution is similarly changing the practices and capabilities of operators in their industrial environments. This paper introduces and explores the notion of the Operator 4.0 as well as how this novel way of conceptualizing the human operator necessarily implicates human values in the technologies that (...) constitute it. The design approach known as value sensitive design (VSD) is used to explore how these Operator 4.0 technologies can be designed for human values. Expert elicitation surveys were used to determine the values of industry stakeholders and examples of how the VSD methodology can be adopted by engineers in order to design for these values is illustrated. The results provide preliminary adoption strategies that industrial teams can take to Operator 4.0 technology for human values. (shrink)

This article addresses the new theories and concepts of design management: design thinking, user experience (UX) and service design. They consider people's experiences and focus on the characteristics of each one of them. From industrial design, the scope and relationships between these definitions - now better visible - were analyzed, which always belonged to the design field of the discipline, from which an attempt was made to identify how they influence innovation, design and (...) development of new products. To account for the evolution that the design field has had, the most significant processes are contrasted to visualize the differences that make this change fundamental. Finally, it is concluded on its strategic relevance for the application in public and private organizations. Also taking into account how these theories are methodologically incorporated into the set of activities inherent to industrial design. (shrink)

Emerging technologies such as cloud computing, augmented and virtual reality, artificial intelligence and robotics, among others, are transforming the field of manufacturing and industry as a whole in unprecedent ways. This fourth industrial revolution is consequentially changing how operators that have been crucial to industry success go about their practices in industrial environments. This short paper briefly introduces the notion of the Operator 4.0 as well as how this novel way of conceptualizing the human operator necessarily implicates human (...) values in the technologies that constitute it. Similarly, the design methodology known as value sensitive design (VSD) is drawn upon to discuss how these Operator 4.0 technologies can be design for human values and, conversely, how a potential value-sensitive Operator 4.0 can be used to strengthen the VSD methodology in developing novel technologies. (shrink)

Il design industriale è sempre più importante come mezzo per differenziare i prodotti e aumentarne il valore. Allo stesso tempo, la velocità con cui un prodotto viene offerto nel mercato dipende dalla capacità di integrare il design nel processo di produzione. Tuttavia, molte PMI - in particolare le nuove aziende basate sulla tecnologia - mancano di competenze specialistiche nella gestione del design e spesso non prestano sufficiente attenzione a questo aspetto. L'industria automobilistica e le grandi aziende come (...) Philips e Braun gestiscono e misurano l'impatto del design come strumento innovativo. Negli ultimi anni, le aziende industriali che sono in prima linea nella produzione di determinati prodotti stanno iniziando a sperimentare una forte concorrenza che non è egualmente protetta. Subiscono gli impatti dell'esperienza offerta da quasi gli stessi prodotti a prezzi inferiori, grazie a un minore investimento in ricerca e sviluppo, che riduce la struttura dei costi. (shrink)

in the present work we analyze the new concepts and theories related to the activity of Design Management, which focus on the experiences of people and the particular characteristics of each one of them. Specifically, from an Industrial Design perspective, the scope and relationships between these conceptual definitions —now made visible— that always belonged to the field of design of the discipline will be studied, trying to identify how they influence innovation and product development. Finally, it (...) will conclude about its strategic relevance for public and private organizations, and the incorporation to the set of professional activitie. (shrink)

Although artificial intelligence has been given an unprecedented amount of attention in both the public and academic domains in the last few years, its convergence with other transformative technologies like cloud computing, robotics, and augmented/virtual reality is predicted to exacerbate its impacts on society. The adoption and integration of these technologies within industry and manufacturing spaces is a fundamental part of what is called Industry 4.0, or the Fourth Industrial Revolution. The impacts of this paradigm shift on the human (...) operators who continue to work alongside and symbiotically with these technologies in the industry bring with it novel ethical issues. Therefore, how to design these technologies for human values becomes the critical area of intervention. This paper takes up the case study of robotic AI-based assistance systems to explore the potential value implications that emerge due to current design practices and use. The design methodology known as Value Sensitive Design (VSD) is proposed as a sufficient starting point for designing these technologies for human values to address these issues. (shrink)

Designing a virtual environment within a digital game occupies a large part of the design procedure, requiring holistic attention and a broad arrangement of the game constituents. Considering other design disciplines, they occupy a unified design methodology; however, a comprehensive literature review reveals the lack of the intended design methodology in the digital game domain's virtual environment development, despite a currently proposed theoretical methodology trying to dissolve the issue. Hence, this research aims to determine the industry's (...) requirements and provide a set of assets included in current digital games as an initial step of providing such a design methodology for the domain. In this regard, the researchers reverse-engineered ten selected digital games, understanding the current condition of digital games via adopting the mentioned currently available design methodology. This dataset reveals a lack in the assets of the story layer in the recent digital games, despite their focus on being story-based. This dilemma leads to long text or speech conversations between game characters, disrupting the players while following the game. The current design focuses on environmental resources only, however, as a virtual landscape, the story needs to be reinforced to be a balanced and well-designed game. Hence, increasing the ratio of the assets in this layer will advance the games' interactivity. Also, as future work, this data set could pave the way for a digital game industry design tool regarding the virtual environment. (shrink)

In recent years there has been a number of promising technical and institutional developments regarding use of ontologies in industry. At the same time, however, most industrial ontology development work remains within the realm of academic research and is without significant uptake in commercial applications. In biomedicine, by contrast, ontologies have made significant inroads as valuable tools for achieving interoperability between data systems whose contents derive from widely heterogeneous sources. In this position paper, we present a set of principles (...) learned from the successful Open Biomedical Ontologies (OBO) Foundry initiative to guide the design and development of the Industrial Ontologies Foundry (IOF), which is a counterpart to the OBO Foundry initiative for the manufacturing industry. We also illustrate the potential utility of these principles by sketching the conceptual design of a framework for sustainable IOF development. (shrink)

This chapter deals with the ways in which entrepreneurships driven by industrial design and the strategies for interconnecting design for innovation are articulated. In the first instance, current practices are recognized in order to analyze the different processes that entrepreneurial dynamics go through. This analysis is carried out from a systemic perspective, at three levels of abstraction: designer, entrepreneurship and ecosystem. The theoretical and conceptual framework will be structured based on the innovations driven by design, which (...) occur around the designer, his personal projects, and the possible interactions and singularities offered by living spaces. The objective of this work is to unravel the eventual relationships of the entrepreneurial designer in the ecosystem and to highlight the potential added by emerging connections, which allow for the projection of synergistic actions with other actors to create value(s). In this way, other possible views of the entrepreneurial process are provided, where the cultural and philosophical dimension that characterizes industrial designers allows them to achieve a higher quality of life, designing and producing collectively (in) their environment. (shrink)

In the contemporary era of urban design, the advent of big data and digital technologies has ushered in innovative approaches to exploring urban spaces. This study focuses on the application of Augmented Reality (AR) and Extended Reality (XR) technologies in the metropolitan areas of Houston and Amsterdam. These technologies create immersive 'Phygital Installations' that blend physical and digital elements, effectively capturing people's perceptions and enhancing urban design proposals. By fostering human-centered planning, AR and XR technologies make urban (...) class='Hi'>design more interactive and accessible to the public. Houston, with its rapid industrial growth and diverse socio-economic landscape, provides a unique setting to examine the impacts of these technologies on urban form and socio-environmental dynamics. In contrast, Amsterdam, with its rich historical layers and socio-cultural diversity, offers insights into the integration of AR/XR technologies in urban planning, particularly in the realm of historical preservation and contemporary urban development. This research contributes to the emerging field of AR/XR in urban design by highlighting the transformative potential of these technologies in enhancing the understanding and engagement in urban design and spatial planning. (shrink)

This work aims to study strategies used in Argentine local development experiences, focussing on industrial design, marketing and entrepreneurship. In order to this purpose, backgrounds are analysed with this approach adding the study of three strategic plans for national and provincial-level that are currently in force. With the analysis of the transport system in the last decade, an accelerated cost increase is evident, resulting in a relatively higher price of distributed products. This situation that was initially perceived as (...) a disadvantage finally set up an opportunity to produce locally. The goal of this paper is to provide tools that contribute to the work shipped by key institutions for local development (public, private and intermediary organisations), and the way these interact with the actors and the territory. In particular, the identification of productive sectors and the selection of goods that can be produced and consumed locally, as a key input for the formulation of projects. (shrink)

The theme of this book is benchmarking in the public sector and part of the interest to analyze the importance that benchmarking has gained in the sector -as a tool for improvement and innovation of public management- where States commit efforts to achieve quality, efficiency and effectiveness in the services it provides. The study is exploratory and descriptive, employing a qualitative methodology that combines a bibliographic analysis for the elaboration of the theoretical framework and the definition of the types and (...) dimensions of benchmarking, with the identification and description of experiences from the empirical evidence surveyed. In a special chapter, the importance, scope and dimensions of benchmarking of product design (comparative evaluation of product design or industrial design) is discussed for the state assessment in design and development of new products for micro, small and medium producers. Our approach includes the different policies and actions to support Micro, Small and Medium Industries (MiPyMIs), which are undertaken from subnational states. RESUMEN. El tema de este libro es el benchmarking en el sector público y parte del interés por analizar la importancia que ha cobrado el benchmarking en el sector –como una herramienta de mejora e innovación de la gestión pública– donde los Estados comprometen esfuerzos para conseguir calidad, eficiencia y eficacia en los servicios que presta. El estudio es exploratorio y descriptivo, emplea una metodología cualitativa que combina un análisis bibliográfico para la elaboración del marco teórico y la definición de los tipos y dimensiones del benchmarking, con la identificación y descripción de experiencias a partir de la evidencia empírica relevada. En un capítulo especial se trata la importancia, alcances y dimensiones del benchmarking of product design (evaluación comparada de diseño de producto o diseño industrial) para el asesoramiento estatal en diseño y desarrollo de nuevos productos a micro, pequeños y medianos productores. Nuestro enfoque comprende a las distintas políticas y acciones de apoyo a las Micro, Pequeñas y Medianas Industrias (MiPyMIs), que se emprenden desde los Estados subnacionales. (shrink)

Digital practices in design, together with computer-assisted manufacturing (CAM), have inspired the reflection of philosophers, theorists, and historians over the last decades. Gilles Deleuze’s The Fold: Leibniz and the Baroque (1988) presents one of the first and most successful concepts created to think about these new design and manufacturing practices.1 Deleuze proposed a new concept of the technological object, which was inspired by Bernard Cache’s digital design practices and computer-assisted manufacturing. Deleuze compared Cache’s practices to Leibniz’s differential (...) calculus-based notion of the parametric curve. From this perspective, the object is no longer an essential form: rather, it is functional, defined by a family of parametric curves. In Deleuze’s terms, it is an objectile. This definition grasps a particular aspect of modernity in the technological object, rendering possible the industrial production of “the unique object” (la pièce unique), while making obsolete the homogeneity that comes with industrial standardization. What follows introduces developmental biology into this design matrix, interrogating the relationship between parametric design and computer-assisted manufactory on the one hand and biological morphogenetic processes on the other. Is one necessary for the other? Does an architect need computation in order to render morphogenetic shapes? In answering these questions, this chapter displaces the centrality of digital technology in the design of shape-shifting forms within architecture and calls for a rethinking of design by way of analog prototypes. I argue that “thinking through analogs” offers another means of generating parametrically based morphogenetic forms. (shrink)

Advanced nanotechnology promises to be one of the fundamental transformational emerging technologies alongside others such as artificial intelligence, biotechnology, and other informational and cognitive technologies. Although scholarship on nanotechnology, particularly advanced nanotechnology such as molecular manufacturing has nearly ceased in the last decade, normal nanotechnology that is building the foundations for more advanced versions has permeated many industries and commercial products and has become a billion dollar industry. This paper acknowledges the socialtechnicity of advanced nanotechnology and proposes how its convergence (...) with other enabling technologies like AI can be anticipated and designed with human values in mind. Preliminary guidelines inspired by the Value Sensitive Design approach to technology design are proposed for molecular manufacturing in the age of artificial intelligence. (shrink)

This study aims to investigate the relationship between job burnout and employee performance in the feed industry during the ASF outbreak. Further, the researchers employed a descriptive-correlational research design in order to analyze the acquired data and produce pertinent findings. Thus, the researchers gathered data from one hundred two (102) feed industry employees. The Maslach Burnout Inventory (MBI) and Individual Work Performance Questionnaire (IWPQ) were employed to ascertain the extent of job burnout experienced by the respondents and evaluate employee (...) performance, respectively. Based on the statistical analysis, there is a significant relationship between job burnout and employee performance. Moreover, the study's findings were thoroughly analyzed and discussed. (shrink)

In the modern business environment, characterized by rapid technological advancements and globalization, abetted by IoT and Industry 5.0 phenomenon, innovation is indispensable for competitive advantage and economic growth. However, many organizations are facing problems in its true implementation due to the absence of a practical innovation management framework, which has made the implementation of the concept elusive instead of persuasive. The present study has proposed a new innovation management framework labeled as “Absolute Innovation Management (AIM)” to make innovation more understandable, (...) implementable, and part of the organization’s everyday routine by synergizing the innovation ecosystem, design thinking, and corporate strategy to achieve competitive advantage and economic growth. The current study used an integrative literature review methodology to develop the “Absolute Innovation Management” framework. The absolute innovation management framework links the innovation ecosystem with the corporate strategy of the firm by adopting innovation management as a strategy through design thinking. Thus, making innovation more user/human-centered that is desirable by the customer, viable for business and technically feasible, creating both entrepreneurial and customer value, and boosting corporate venturing and corporate entrepreneurship to achieve competitive advantage and economic growth while addressing the needs of IoT and Industry 5.0 era. In sum, it synergizes innovation, design thinking, and strategy to make businesses future-ready for IoT and the industry 5.0 revolution. The present study is significant, as it not only makes considerable contributions to the existing literature on innovation management by developing a new framework but also makes the concept more practical, implementable and part of an organization’s everyday routine. (shrink)

Basic Formal Ontology (BFO) is a top-level ontology used in hundreds of active projects in scientific and other domains. BFO has been selected to serve as top-level ontology in the Industrial Ontologies Foundry (IOF), an initiative to create a suite of ontologies to support digital manufacturing on the part of representatives from a number of branches of the advanced manufacturing industries. We here present a first draft set of axioms and definitions of an IOF upper ontology descending from BFO. (...) The axiomatization is designed to capture the meanings of terms commonly used in manufacturing and is designed to serve as starting point for the construction of the IOF ontology suite. (shrink)

In this context, the study explored the relationship between organizational climate and employee innovative work behaviour among food manufacturing industries in Malaysia. The study is a descriptive correlational survey research design where data is sourced out from a total of randomly sampled 260 employees. Results revealed that a favourable organizational climate on innovation, proactivity, and risk-taking is prevailing among the companies. A very high level of innovative work behaviour is emanating among the employees on idea exploration, generation, championing, and (...) implementation. Test of differences showed that employee gender, position, unit, and years of service spelt significant differences in the perception of the employees on organizational climate and innovative work behaviour. A meaningful relationship surfaced between organizational climate and employee innovative work behaviour, suggesting that for food manufacturing industries to sustain innovative and competitive advantages, there is a need to promote a nurturing and encouraging entrepreneurial organizational climate. Finally, a congruency among the domains of organizational climate and employee innovative work behaviour emerged. It suggests that when higher positive organizational climate surfaces, the more likely the employee's manifest innovation work behaviour. This study addressed the gap by providing organizational climate and employee innovative work behaviour among food manufacturing industries in Malaysia. (shrink)

The subject of this book is benchmarking in the public sector and part of the interest is to analyze the importance that benchmarking has acquired in this sector - as a tool for improving and innovating public administration - when states strive for quality, efficiency and effectiveness of the services offered. The study is exploratory and descriptive and uses a qualitative methodology that combines a bibliographic analysis to develop the theoretical framework and the definition of the types and dimensions of (...) benchmarking with the identification and description of the experiences from the empirical data studied. A special chapter discusses the importance, scope and dimensions of product design benchmarking (comparative assessment of product design or industrial design) for government assessment of design and development of new products for micro, small and medium-sized manufacturers. Our approach covers the various policies and measures to support Micro, Small and Medium Industries (MiPyMIs) implemented by sub-national states. (shrink)

Contemporary Information Systems management incorporates the need to make explicit the links between semiotics, meaning-making and the digital age. This focus addresses, at its core, pure rationality, that is, the capacity of human interpretation and of human inscription upon reality. Creating the new real, that is the motto. Humans are intrinsically semiotic creatures. Consequently, semiotics is not a choice or an option but something that works like a second skin, establishing limits and permeable linkages between: human thought and human's infinite (...) world of imagination; and human action, with its correspondent infinite world of intentionality, of desire and of unexplored possibilities. Two instances are contrasted as two reading lenses of current business reality: IS governance and industry 4.0. These phenomena correspond to the need to take accountability, transparency and responsibility into account, when designing IS and when using such systems through the ecology of connectivity, Big Data and the Internet of Things. Political, social and cultural dimensions are brought into the equation, when addressing the question of the relevance and adequateness of IS theory and practice to respond to contemporary challenges. The message is that what has already been achieved is but a shadow, a pale vision, of what might be achieved in the age of the new Renaissance. (shrink)

Abstract: The development of technology pushes human to increase productivity by changing manual system to automatic system. Modernization affect almost all aspect especially in art. Batik is a ancestor legacy of indonesian people that recogized by UNESCO as culture legacy of Indonesia yet batik industries are not develop as much. Modernization in batik art is expected to optimize its productivity. This research design algorithm and the program in MATLAB that used for controlling movement protype of batik maker 2 dof (...) cartesian robot. The input data is a picture that will be processed to obtain the order of coordinate edge. Then it procesed and sent to plantby using MATLAB based on Graphical User Interface (GUI). The 2 dof Cartesian robot and a pen (end effector) is used to draw a pattern. A servo motor is installed to activate end effector and two stepper motor coupled with thread mechanic that used to move it towards the X and Y axis. Testing is done by sending coordinat orders to the plant or by observing drawing process order. Obtained error from program and algorithm testing is 2,32% . (shrink)

Abstract: The main objective is to design a line follower robot is to carry products in the manufacturing process in industries. In this paper, we mainly focused on the design to work the line follower efficiently with lighter weight. The line follower robot designed with 5 sensors to make the robot move in even complex paths. This paper discussed the mechanical and technical issues with the line follower robot and applications in various fields. In the working model, we (...) used black detector infrared sensors So that speed of response of the robot is high. This paper gives an brief idea about all the components used to prepare a line follower robot. (shrink)

Purpose: The research explored empirical evidence to assess the impact of cyber security and supply chain risk on digital operations in the UAE pharmaceutical industry. Methodology/Design/Approach: Based on responses from 243 personnel working at 14 pharmaceutical manufacturing companies in Dubai, data were examined for normality, instrument validity and regression analysis. Cyber security and SC risk on digital operations were explored by applying convenient sampling and descriptive and analytical research design. Findings: The findings validated the significant positive association between (...) cyber security and supply chain risk with digital operations. Research implications and Limitations: The research model was developed with three variables evaluated only on the pharmaceutical industry in Dubai. Future research should focus on multiple manufacturing industries by covering a larger geographic area. Practical implications: When suppliers are highly concentrated, customer-focused organisations with uncertain levels of digital transformation could improve their ability to manage supply chain risk by diversifying their clients. Pharmaceutical firms may require a greater focus on technology-based manufacturing firms to build and maintain customer trust. Originality Value: To illustrate how the pharmaceutical industry has explored the relationship between cyber security, supply chain risk and digital operations, the research highlights the significant and convoluted consequences of the relationship model that have not been previously considered. (shrink)

¿De qué hablamos cuando decimos Diseño Sustentable? El diseño sustentable podría definirse como el diseño que tiene en cuenta los aspectos ambientales en todos los niveles de producción. Así mismo, persigue el objetivo de fabricar productos que aporten el menor impacto posible en el ecosistema a lo largo de todo el ciclo de vida. Es muy difícil encontrar productos de consumo que cumplan puntualmente con los Preceptos del eco diseño y que sean exitosos en el mercado. Ante esta situación es (...) necesario revisar los aspectos involucrados en la concepción de un nuevo producto: ¿El rol del diseñador es el adecuado?, ¿Existe una seria y responsable conciencia por parte de los empresarios para llevar adelante un proyecto de eco diseño?, ¿Son los productos eco lo suficientemente atractivos para captar la atención de los consumidores? (shrink)

This paper explores the impact of furniture and machines on spatial organization and circulation systems in industrial buildings using space syntax analysis. While space syntax research covers various settings, industrial buildings have received limited attention. This study aims to address this gap by examining how machines and furniture influence spatial organization and circulation in two industrial buildings: A Nitrile Glove manufacturing facility and a textile manufacturing factory. The furnished and unfurnished floor plans were analyzed using space syntax (...) software, DepthMapX, with connectivity and agent-based analyses. The results indicate that unfurnished plans have centrally located connectivity values, whereas furnished plans create subspaces with varying connectivity. Agent-based analysis reveals that unfurnished spaces have high density in the center, while furnished spaces distribute density more evenly, resulting in more uniform circulation. This study concludes that industrial building spatial configurations result from a combination of architectural design and the placement of machines and furniture. (shrink)

In this paper a NARMA L2, model reference and neural network predictive controller is utilized in order to control the output flow rate of the steam in furnace by controlling the steam flow valve. The steam flow control system is basically a feedback control system which is mostly used in cement production industries. The design of the system with the proposed controllers is done with Matlab/Simulink toolbox. The system is designed for the actual steam flow output to track the (...) desired steam that is given to the system as input for two desired steam input signals (step and sine wave). In order to analyze the performance of the system, comparison of the proposed controllers is done by simulating the system for the two reference signals for the system with and without sensor noise disturbance. Finally the comparison results prove the effectiveness of the presented process control system with model reference controller. (shrink)

In this paper, a 2 DOF industrial robotic arm is designed and simulated for elbow and wrist angle and velocity performance improvement using robust control method. Mixed H 2 /H ∞ synthesis with regional pole placement and H 2 optimal controllers are used to improve the system output. The open loop response of the robot arm shows that the elbow and wrist angles and velocities need some improvement. Comparison of the proposed controllers for an impulse and step input signals (...) have been done and a promising results have been obtained. (shrink)

In human-centred design (HCD), researchers and designers develop products in cooperation with the potential users of these products. They attempt to give users a voice or a role in their projects, with the intention of developing products that match users’ needs and preferences. This approach is especially interesting in the information and communication technology (ICT) industry, in which many innovations are driven by development of technologies. The author works in HCD projects in the ICT industry and studied one particular (...) project as a participant observer. In this project, two telecom applications were designed together with and for two groups of users: police officers and people who provide informal care. The resulting case studies are interpreted, drawing from the fields of design studies and science and technology studies, and using texts of the philosophers Levinas and Derrida. HCD is presented as a process that happens between people and as a process with ethical qualities. The case studies demonstrate that HCD is a worthwhile approach. They also show the difficulties of cooperating with users and of multi-disciplinary team-work. HCD practitioners attempt to be open towards others, but they also tend to move towards closure and towards the self. The author suggests reflexive practice as a way for practitioners to be more aware of and to articulate these tendencies. This is intended to help them to better align their practices with what HCD can be about: a process of learning and creating together. (shrink)

This research explore factors influencing entrepreneurial sustainability and financial stability within the context of the fashion industry, with a focus on the perceptions of fashion designers in Abia State. Descriptive survey methods were employed to provide a comprehensive understanding of the subject matter. The total population for the study was 487, which comprises all registered fashion designers operating in Aba, hence the whole population was used for the study. The study was carried out in Aba which is one of the (...) major fashion hubs in Abia State. Data was collected through structured questionnaire titled Questionnaire on Perceived Entrepreneurial Sustainability and Financial Stability among Fashion Designers (QPESFAFD). The data collected was analyzed using mean and standard deviation to answer the items on each objective. The findings revealed that there are perceived entrepreneurial sustainability strategies adopted by fashion designers, and perceptions influence the financial stability of fashion businesses. It also revealed that there are challenges and opportunities faced by fashion designers in sustaining their businesses and achieving financial stability. Based on the findings, recommendations were made that, there should be regular workshops and training sessions that will focus on financial management and planning specifically tailored for fashion designers and networking and collaboration platforms should facilitate knowledge sharing, resource pooling, and collaboration among fashion designers in Abia State. (shrink)

Financial distress in the hospitality industry affects both businesses and their employees. This study explores the perspectives of employees on financial distress within the hospitality sector in Imo State, Nigeria. The study addressed three research questions. Survey research design was adopted for the study. The study was carried out in Imo State Nigeria. 361 financial officers in the hotels within the hospitality industry in Owerri Imo State were the target population and random sampling was used to select 181 hotels (...) whose financial officers served as the study respondents. Structured questionnaire was specifically designed for this study. The data was analyzed using mean, and standard deviation to provide an overview of employee perspectives on financial distress. The results indicate that a wide range of variables, such as economic downturns, irregular revenue, high cost of living, and management concerns within businesses, are responsible for financial hardship among employees in the hotel industry in Imo State. Employees also mentioned that worry, anxiety, and job instability were direct effects of their financial hardship. Based on the results, a number of suggestions are made to lessen financial hardship. These include putting in place financial literacy initiatives for staff members, enhancing management-staff communication and transparency, supporting ethical labor practices, and encouraging social support systems within the workplace. (shrink)

Usually, modular construction involves the off-site manufacturing of standard building components in a factory before the components are assembled on the construction site. It is common to use terms like "prefabrication," "off-site construction," and "modular construction" interchangeably. The construction of modular constructions nowadays is flourishing all over the globe. The roots of the Albanian prefabricated constructions are extended for the first time around the 1970s. This paper will indeed analyze some recently built modular construction in Albania, considering and comparing it (...) with international case studies. The demand for new construction in Albania is rising rapidly. Currently, the most common structures are cast-in-place beam-column designs, driven by both traditional mindsets and industrial capabilities. However, with Albania's economic growth, there is an increasing need for affordable, quickly built, and technologically advanced buildings. Modular construction, which assembles prefabricated modules on-site, offers a solution. This method aligns with bioclimatic design principles, reducing environmental impact and optimizing resources, marking a shift toward sustainability in the construction industry. The purpose of this article is to explore the potential integration of “modular construction techniques” with “bioclimatic design concepts” to create buildings that are environmentally friendly, energy-efficient, and multipurpose by function. This study explores the use of modular construction techniques in conjunction with bioclimatic techniques to increase “building sustainability”. Combining these tactics encourages energy efficiency and a reduced environmental effect, making people far more resilient and weather-adaptable. The synergy between the two of them is necessary. (shrink)

In this study, a 2 DOF industrial robotic arm is designed and simulated for elbow and wrist angle and velocity performance improvement using robust control method. Mixed H2/H infinity synthesis with regional pole placement and H2 optimal controllers are used to improve the system output. The open loop response of the robot arm shows that the elbow and wrist angles and velocities need some improvement. Comparison of the proposed controllers for an impulse and step input signals have been done (...) and a promising results have been obtained. (shrink)

In the paper, the current state and trends of the use of AR technologies in the transport industry and in future specialists' vocational training processes have been reviewed and analyzed. The essence and content of the AR technologies relevant to the transport industry have been clarified. The main directions of the AR introduction for the various spheres of the transport industry including design and tuning, mechanical and automotive engineering, marketing and advertising, maintenance and operation, diagnostics and repair of cars (...) have been determined. The AR mobile apps market and the features of the mobile apps with AR have been outlined. The pedagogical terms of effective organizing the students' cognitive activity for transport industry via AR technologies have been determined and researched, namely: to provide each student with the position of an active actor of study and cognitive activity, to switch the study information in a mode of the project activity, the educational content professionalization and to teach students to use the modern ICT purposefully, to manage students' cognitive process by means of ICT. The methodology of using mobile apps with AR in students' vocational preparation process for the transport industry has been presented. It covers the system of educational tasks, updated content of lectures, practical and laboratory classes for specialized disciplines. (shrink)

In this paper, the design and analysis of coupled tank water level control system is done using robust control theory. The main aim of this work is to improve level controlling mechanisms in industries and household areas. In this paper, H ∞ and μ –synthesis controllers are designed to improve the level control system. The coupled tank water level control system is designed using the proposed controller’s comparison and tested for tracking a reference level signals (step, sine wave and (...) random) and simulation results have been analyzed successfully. Finally the comparative simulation results prove the effectiveness of the proposed coupled tank water level control system with H ∞ controller for improving the tracking mechanism performance of the system. (shrink)

In this paper, the design and analysis of coupled tank water level control system is done using robust control theory. The main aim of this work is to improve level controlling mechanisms in industries and household areas. In this paper, H ∞ and μ –synthesis controllers are designed to improve the level control system. The coupled tank water level control system is designed using the proposed controller’s comparison and tested for tracking a reference level signals (step, sine wave and (...) random) and simulation results have been analyzed successfully. Finally the comparative simulation results prove the effectiveness of the proposed coupled tank water level control system with H ∞ controller for improving the tracking mechanism performance of the system. (shrink)

By looking at videogame production through a two-vector model of design – a practice determined by the interplay between economic and technological evolution – we argue that shared screen play, as both collaboration and competition, originally functioned as a desirable pattern in videogame design, but has since become problematic due to industry transformations. This is introduced as an example of what we call design vestigiality: momentary loss of a design pattern’s contextual function due to techno-economical evolution.

Travel is a service-intensive business that contributes to both global and local economies. As to the World Tourism Organization, the international tourist arrivals reached over a billion. These arrivals are fulfilled by various travel and tour companies that make billions of dollars in annual revenue. The conspicuous economy is generated through the close collaboration of the stakeholders, particularly tour companies, hotels, governments, scholars, and local vendors. One cannot deny the contribution of city tours to the striking success of the travel (...) industry. A city tour is one of the main types of tours that refers to the travel organization designed to make people experience the good vibes of a city. This concept is worth studying as being a contributor to economic growth. A successful city tour thrives on strong design. A well-cultivated design is essential for good moments of truth during touring activity. Henceforth, one should ponder the principles for a quality city tour design from both theoretical and practical perspectives. (shrink)

What is the research for in the society? We may imagine the professionals engaged in these activities, shall we say, university professors, researchers in the public and private institutions, and even the lay inventors at home or in the neighborhood. The research is related with some of knowledge or ideas, which, however, should be creative and original. It is the main function of those professionals, and can develop in dissemination of the findings produced by research. It frontiers the knowledge of (...) humans which enables a better view of world and generates the public welfare. The scholars are often those professionals who are required or in some cases, squeezed to produce an original contribution to the specific field of academy. As the society develops, we now require a scientific knowledge beyond the plain understanding of the nature and society. The scientific knowledge is qualified of some elements, i.e., evidence-based, universal frame to be applied, sense of understanding, pragmatic in comprehension or application, more persuasion on theory, paradigm, typologies, intersubjectivity, empirical relevance and so. It informs a philosophy of humans, makes them conscientious and knowledgeable, as well as enhances a professional performance for not only their field but also other disciplines. For example, the criminal justice system borrows the idea or information confirmed by other disciplines, psychology and sociology notably. What is the Durham rule in the excuse of culpability? The scope of rule could not enjoy a persuasion if not to be supported by the works of psychologists. The scientific knowledge perhaps could recourse its most salient dynamism in coupling with an economic exploitation. A cultivation of knowledge to serve the economic use and its industrialization reveals it’s competitive edge in the society. The kind of concepts, information age, e-technology, and intellectual property rights are leading the present time of narrative as we see routinely. May new laws, and new concept of e-education or e-government, GMO products as well as the travel of universe in the near future also follow that the updated profile of scientific knowledge on the engineering and natural science contributed to expand our horizon of subsistence. (shrink)

The production of scientific instruments in America was neither a postwar phenomenon nor dramatically different from that of several other developed countries. It did, however, undergo a step-change in direction, size and style during and after the war. The American scientific instrument industry after 1945 was intimately dependent on, and shaped by, prior American and European experience. This was true of the specific genres of instrument produced commercially; to links between industry and science; and, just as importantly, to manufacturing practices (...) and cultures. I will argue that, despite the new types of instrument commercialized after the war, this historical continuity of links with science and scientists guided and constrained the design and manufacture of these products. Nevertheless, new designers, manufacturers and customers gradually transformed the culture of scientific instruments in the second half of the century. -/- This chapter deals with a subset of the American instrument industry, namely the measuring and monitoring instruments manufactured for scientific use. Even with the specification of ‘scientific’ instruments, however, these borders are rather artificial and unclear: instrument making from the seventeenth through the twentieth century has generally involved the fabrication of both standard products and custom-made devices for scientific use.2 In this context of sales quantities, ‘scientific’ instruments have often been defined as low-volume, special-order or custom devices. In a similar vein, ‘scientific’ instruments were commonly distinguished from ‘production’ instruments by context of usage, namely their very absence from – and indeed irrelevance to – production environments. This demarcation according to customer and environment was mirrored in at least one furth er respect: the training of their users. The classification into ‘scientific’ and ‘engineering’ applications was as fluid as the relationship between American universities and technical industries themselves.Despite these complementary definitions, the notion of the ‘scientific instrument’ was beginning to prove inadequate even at the turn of the twentieth century, and dramatically so when discussing the post-Second World War period. Definitions altered qualitatively after the Second World War in at least three further ways: (a) new genres of device altered the scope of the scientific instrument; (b) the contribution of State and military sponsorship of new forms of instrument became significant; and, (c) the postwar demand for specialist instruments increased rapidly, owing to wartime innovation, new applications and new customers. I will explore the evolution of instrument manufacturing in this changing context of new technology, funding, development and markets. (shrink)

Poster Presentation accepted for the July 2014 conference in Bournemouth, England. -/- Abstract: Current service-quality models in the Hong Kong fast-food restaurant (HK FFR) industry are primarily designed on the basis of fast service and standardised fast-food service process that are expected to enhance customer retention. This study explores the feasibility of a new service-quality (SQ) model that could offer enhanced customer satisfaction and retention in the competitive Hong Kong FFR context. A qualitative, phenomenological-interview approach incorporating the critical incident technique (...) (CIT) was used. A purposeful sample of 30 HK taxi drivers was selected due to their frequency of eating at FFRs. The taxi drivers’ FFR experiences assisted in understanding the phenomenological nature of the HK FFR context. An Employee-Centric SKIP-based (Service, Knowledge, Information, Process) SQ model emerged from the data and is presented, where SKIP SQ drives trust, perceived value and satisfaction, and then retention in turn. In contrast to traditional models that simply focus on fast service and standardised fast-food service process, this study found that current FFR SQ models are ineffective in enhancing HK FFR customers’ repurchase intentions. The findings suggest that a SKIP-based SQ model incorporating a focal point of customisation and innovativeness could improve competitive advantage in the HK FFR context. -/- . (shrink)

The purpose of this study is to explore, gauge and identify the criterion of selecting qualified applicants in Hotel and Tourism Industry amongst graduates from selected SUC’s and HEI’S: Basis for Employability. The data are collected from different hotel and tourism companies who are also considered partners of some SUC’S and HEI’s on On-the- Job Training where students are deployed to undergo trainings in different areas of hotel and tourism sector specifically asked 10 (ten) Five Star Hotels, 10 (ten) Travel (...) Agencies, 10 (ten) Restaurants, 5 (five) Airline and Aviation company and 5 (five) from Resort Operations as the respondents of this study. The study used descriptive survey research design and data collection was administered through Google Forms. Initially, participants were also invited to a Focus Group Discussion where their inputs were asked regarding their opinions about the resumption of face-to-face on-the-job training. Since they are already attended the Focus Group Discussion, they were also invited to answer the survey questionnaire related to this study. Questionnaire and documentary analysis were the data gathering tools employed in the study. There is a significant factors and criterions in selecting qualified applicants in Hotel and Tourism Industry as basis for employability. The challenges met by the researcher was respondents has different set of criterions in selecting qualified applicants thus, study may also recommend and suggest standardized or uniform criterion in selecting qualified applicants in hotel and tourism industry. (shrink)

Post-truth has an impression that the facts have been only corrupted with it. Many examples support this impression. However, it should not be perceived as just a disruption of the truth considering only political events. In different fields, such as creative industries, it may have different implications. Despite studies regarding education, there has not been much discussion on the design process and education. The objective of this research is to develop an introductory examination of what the design process (...) (with statements in the book 'How Designers Think') can produce in post-truth cases and to seek the productive potentials of post-truth. Therefore, the claims were reviewed - as design problems, solutions and process itself - within the framework of the post-truth era. Some of the results are as follows: For design problems, designers need to find a way to oscillate among objectives without based on truth. Post-truth environments may trigger finding out unique spatial possibilities with designs of unique hierarchies. For design solutions, in post-truth era, the only optimal thing is to be apathetic about truth. There is no need to seek the optimal solutions. The ideal of wholeness is expired for the solutions. This situation fosters free circulations of tiny parts of solutions in the post-truth universe. For the design process, the correctness of the process is much more questionable anymore. Identifying problem is a crucial part of the design process. As the truth disappears, it becomes more difficult to discriminate the characteristics and value of the problems. (shrink)

In this article, we investigate how to explain the difference between traditional design, engineering, and technology—which have exploited nature and put increasing pressure on Earth’s carrying capacity since the industrial revolution—and biomimetic design—which claims to explore nature’s sustainable solutions and promises to be regenerative by design. We reflect on the concept of mimesis. Mimesis assumes a continuity between the natural environment as a regenerative model and measure for sustainable design that is imitated and reproduced in (...) biomimetic design, engineering, and technology. We conceptualize mimesis in terms of two interdependent boundary conditions: differentiation and participation. We subsequently develop four characteristics of biomimicry as regenerative design, engineering, and technology: technological mimesis is 1) a participative differentiation of nature; 2) supplemental to natural mimesis in biomimetic design; 3) the participative differentiation of technological mimesis is constitutive of nature; 4) the participative differentiation of technological mimesis is always limited. (shrink)

Interaction with the environment occurs in the perception of movement. Movement is the basic concept of mobility. Development and diversification (i.e., faster transportations, new technological access, etc.) of movement concepts may contribute modern people to become independent of any place. Nomadic cultures constitute the basic principles of mobile architecture with light, portable materials and flexible constructions. In the industrial age, futurist manifesto announced machine-housing concepts. The mechanized perception of the spaces prepared ground for mobilization. Mobility, as a source of (...) independence from places, is sometimes a preference but sometimes the result of urgency. “Individual preference”, “cultural movement” and “forced movement” are key reasons for movements which may differentiate modes of mobile space. The objective of this study to examine distinctive features of mobile spaces of forced movements (i.e., for refugees) by comparing with other types of mobility (individual preference and cultural movement). Various design competitions were held for mobile spaces. The cases were selected for this study, considering the role of the user’s profile (unspecific users; nomads/immigrants; refugees) who live in mobile spaces. We analyzed awarded/selected projects for each type of mobility. As a result of examining the awarded outcomes of the competition the following parameters were detected: quantity of users; designer's choice for location; reaction to the environment; contextual attention; scope of modularity; mode of portability; type of portability; cost of materials and construction; proposal for belonging; sensitivity for sustainability. It seems that current events in the world have transformed the concept of mobility and led to the development of new definitions of mobility. This paper presents one of the new definitions of mobility, specifically for refugees. Many aspects of mobile architecture for refugees, as a new definition of mobility, has shown in this study. (shrink)

The town of Aksum is historically the richest tourist destination in Ethiopia. Thus, it is known for its cultural tourist attractions i.e. archaeological, religious and historical attractions. The objective of this study is to assess the supplies of micro and small scale enterprises to the tourism industry in the town. A qualitative research design was pursued in this study. Data were collected from primary and secondary sources. Interviews were conducted with purposely selected subjects as the main instrument of primary (...) data collection. In addition, field visits were conducted to observe the sites and take pictures. Both published and unpublished secondary sources were used, particularly for the literature review. Participants of this study were selected from the tourism and hotel industry, the Small Scale Enterprises Agency, micro and small scale enterprises, the Culture and Tourism Agency and other government offices. The Ethiopian Sustainable Tourism Development Project (ESTDP) was also consulted to assess the involvement of micro and small scale enterprises in the tourism sector. The findings indicate that micro and small scale enterprises have been divided into the five main economic sectors including agriculture, manufacturing, construction, trade and service sectors. The Ethiopian Sustainable Tourism Development Project has supported the enterprises in working with the tourism industry. The government’s role in organizing and supporting the enterprises however, seems to be weak. Some of the enterprises produce and sell their products to tourism institutions involved as frontline suppliers to the tourists. However, the enterprises are not well-organized and not strong enough to supply the required quantity and quality. Moreover, some of the enterprises don’t have any link with the tourism sector. The policy implications from this study indicate that local government in collaboration with private sectors and voluntary donors should support the local small enterprises to increase their capacity and improve their supplies. (shrink)

The producers of Automobile products innovated a new thought of designing the two- wheelers in such a way to attract the women. Today most of the women prefer to travel through two-wheelers. A wide variety of two-wheelers of all category light- weighted, medium – weighted and heavy weighted vehicles have been introduced in the market. The objective of the study is to know the preference and satisfaction of women consumers over two-wheelers and the various aspects, which determines the purchase or (...) buying behavior and to know the expectations of women consumers over two-wheelers. The sample size of the study was conducted in Tiruchirappalli city with 75 respondents through Non-Probability Random Sampling Method. (shrink)

Preview: /Review: Brian S. Dixon, Dewey and Design: A Pragmatist Perspective for Design Research, 200 pages./ Brian S. Dixon’s book Dewey and Design provides, as the book’s subtitle declaims, a pragmatist perspective for design research. Design research is an academic field that specifically deals with the design process. Its domain-specific knowledge led to the establishment of design as an independent discipline of study in the second half of the last century. According to Dixon’s (...) description, design research consists of three major areas of investigation: the design process, the artifacts that result from this process, and the relation of these artifacts with the end-user. Dixon exposes the fruitlessness of drawing a clear dividing line, and argues that design research would be better off as a continuous, not necessarily linear, process involving “practically” all three. Concurrently, the author emphasizes the practical aspect of this continuity; on the one hand as a stark contrast to the idea of ​​purely theoretical research, on the other, from a pragmatist viewpoint, intending the knowledge of the world as full of the practical consequences of acting within it. Specifically, the pragmatist slant of Dixon’s proposal is that of John Dewey, centered on the ideas of “an experience,” “inquiry,” and “imagination”; notions aiming at providing “a robust epistemological narrative” for design research. The choice of this perspective necessarily leads Dixon to deal with problems such as the ontology of the specifically creative act of designers, distinct from the artistic one, the communicative potential of industrial artifacts, and their ethical import. (shrink)

For more than two decades, police in the United States have used facial recognition to surveil civilians. Local police departments deploy facial recognition technology to identify protestors’ faces while federal law enforcement agencies quietly amass driver’s license and social media photos to build databases containing billions of faces. Yet, despite the widespread use of facial recognition in law enforcement, there are neither federal laws governing the deployment of this technology nor regulations settings standards with respect to its development. To make (...) matters worse, the Fourth Amendment—intended to limit police power and enacted to protect against unreasonable searches—has struggled to rein in new surveillance technologies since its inception. -/- This Article examines the Supreme Court’s Fourth Amendment jurisprudence leading up to Carpenter v. United States and suggests that the Court is reinterpreting the amendment for the digital age. Still, the too-slow expansion of privacy protections raises challenging questions about racial bias, the legitimacy of police power, and ethical issues in artificial intelligence design. This Article proposes the development of an algorithmic auditing and accountability market that not only sets standards for AI development and limitations on governmental use of facial recognition but encourages collaboration between public interest technologists and regulators. Beyond the necessary changes to the technological and legal landscape, the current system of policing must also be reevaluated if hard-won civil liberties are to endure. (shrink)