Starting from a philosophical perspective, which states that the living structures are actually a combination between matter and information, this article presents the results on an analysis of the bipolar information-matter structure of the human organism, distinguishing three fundamental circuits for its survival, which demonstrates and supports this statement, as a base for further development of the informational model of consciousness to a general informational model of the human organism. For this, it was examined the Informational System of the Human (...) Body and its components from the perspective of the physics/information/neurosciences concepts, showing specific functions of each of them, highlighting the correspondence of these centers with brain support areas and with their projections in consciousness, which are: Center of Acquisition and Storing of Information (CASI) reflected in consciousness as memory, Center of Decision and Command (CDC) (decision), Info-Emotional Center (IES) (emotions), Maintenance Informational System (MIS) (personal status), Genetic Transmission System (GTS) (associativity/genetic transmission) and Info Genetic Generator (IGG) related by the body development and inherited behaviors. The Info Connection (IC), detected in consciousness as trust and confidence can explain the Near-Death Experiences (NDEs) and associated phenomena. This connection is antientropic and informational, because from the multitude of uncertain possibilities is selected a certain one, helping/supporting the survival and life. The human body appears therefore as a bipolar structure, connected to two poles: information and matter. It is argued that the survival, which is the main objective of the organism, is complied in three main ways, by means of: (i) the reactive operation for adaptation by attitude; (ii) the info-genetic integration of information by epigenetic processes and genetic transmission of information for species survival, both circuits (i) and (ii) being associated to the information pole; (iii) maintenance of the material body (defined as informed matter) and its functions, associated to the matter pole of the organism. It results therefore that the informational system of the human body is supported by seven informational circuits formed by the neuro-connections between the specific zones of the brain corresponding to the informational subsystems, the cognitive centers, the sensors, transducers and execution (motor/mobile) elements. The fundamental informational circuits assuring the survival are the reactive circuit, expressible by attitude, the epigenetic/genetic circuit, absorbing and codifying information to be transmitted to the next generations, and the metabolic circuit, connected to matter (matter pole). The presented analysis allows to extend the informational modeling of consciousness to an Informational Model of Consciousness and Organism, fully describing the composition/functions of the organism in terms of information/matter and neurosciences concept. (shrink)

Introduction: The objective of this investigation is to analyse the informational circuits of the brain connections with the body from neurologic and neuroscience point of view, on the basis of the concepts of information promoted by the Informational Model of Consciousness. Analysis: Distinguishing between the virtual and matter-related information promoted by the Informational Model of Consciousness, the main specific features of consciousness are analyzed from the informational perspective, showing that the informational architecture of consciousness consists in seven groups of specific (...) activities, defined as cognitive centres, each of them with specific distinct tasks, but correlated each other: centre of acquisition and storing of information (memory), centre of decision and command (decision), centre of the emotional states (emotions), centre of the body maintenance (power and health), centre of the genetic elaboration/transmission (reproduction) and the info-genetic generator, inherited from the parents (predispositions, talents and skills). A special centre, dedicated to the connectivity with some extra-power properties of the mind is also introduced, assuring an intimate supra-sensitive detection of the world to explain the associated phenomena of the near-death experiences. Result: The activity of all these centres should be supported neurologically by the brain neuro-connectivity to the body and to external and internal info-signals. On the basis of the informational analysis, the neuro-connections of the brain regions associated to the main characteristics of the cognitive centres are highlighted, showing the anatomic and neuro-functional relation between the distinct components of the brain and the specific operating body regions. These connections describe in terms of information the brain-body neuro-activities as informational specific circuits, composed by the info-operational subsystems managed by the brain, and sensors, transducer and execution elements. Conclusion: The components and connections mind-body stipulated by the Informational Model of Consciousness are supported by the neurologic/neuroscience evidence. (shrink)

The conjunction of wireless computing, ubiquitous Internet access, and the miniaturisation of sensors have opened the door for technological applications that can monitor health and well-being outside of formal healthcare systems. The health-related Internet of Things (H-IoT) increasingly plays a key role in health management by providing real-time tele-monitoring of patients, testing of treatments, actuation of medical devices, and fitness and well-being monitoring. Given its numerous applications and proposed benefits, adoption by medical and social care institutions and consumers may be (...) rapid. However, a host of ethical concerns are also raised that must be addressed. The inherent sensitivity of health-related data being generated and latent risks of Internet-enabled devices pose serious challenges. Users, already in a vulnerable position as patients, face a seemingly impossible task to retain control over their data due to the scale, scope and complexity of systems that create, aggregate, and analyse personal health data. In response, the H-IoT must be designed to be technologically robust and scientifically reliable, while also remaining ethically responsible, trustworthy, and respectful of user rights and interests. To assist developers of the H-IoT, this paper describes nine principles and nine guidelines for ethical design of H-IoT devices and data protocols. (shrink)

Primitive awareness leading to consciousness can be explained as a manifestation of internal forces between charge and mass. These internal forces, related to the weak and strong forces, balance the external forces of gravity-inertia and electricity-magnetism and thereby accommodate outside influences by adjusting the internal structure of material from which we are composed. Such accommodation is the physical implementation of a model of the external physical world and qualifies as Vitiello's double held inside ourselves. We experience this accommodation as the (...) conscious experience in front of our noses. Neural pulse traffic is interpreted as unconscious signal processing activity happening between this internal accommodation and our external interface of sensors and actuators. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}. (shrink)

A large body of compelling evidence has been accumulated demonstrating that embodiment – the agent’s physical setup, including its shape, materials, sensors and actuators – is constitutive for any form of cognition and as a consequence, models of cognition need to be embodied. In contrast to methods from empirical sciences to study cognition, robots can be freely manipulated and virtually all key variables of their embodiment and control programs can be systematically varied. As such, they provide an extremely powerful (...) tool of investigation. We present a robotic bottom-up or developmental approach, focusing on three stages: (a) low-level behaviors like walking and reflexes, (b) learning regularities in sensorimotor spaces, and (c) human-like cognition. We also show that robotic based research is not only a productive path to deepening our understanding of cognition, but that robots can strongly benefit from human-like cognition in order to become more autonomous, robust, resilient, and safe. (shrink)

Internet, a revolutionary invention, is always transforming into some new kind of hardware and software making it unpreventable for anyone. The type of communication that we see today is either human-to-human or human-to-device, but the Internet of Things (IoT) promises a great future for the internet where the type of communication is machine-to-machine (M2M). The Internet of Things (IoT) is defined as a paradigm in which objects provide with sensors, actuators, and processors communicate with each other to serve a (...) meaningful purpose. In this paper we discussed IoT and its architecture. Further we explained different applications of IoT for users, IoT advantages and disadvantages. (shrink)

We describe a prototype ontology-driven information system (ODIS) that exploits what we call Portion of Reality (POR) representations. The system takes both sensor data and natural language text as inputs and composes on this basis logically structured POR assertions. The goal of our prototype is to represent both natural language and sensor data within a single framework that is able to support both axiomatic reasoning and computation. In addition, the framework should be capable of discovering and representing new kinds of (...) situations and thematic roles, (e.g., roles such as agent, patient and instrument), based on new compositions of existing representations. We applied our prototype in an intelligence analysis use case to test the hypothesis that a framework of this sort can produce usefully structured information from combined natural language and sensor data inputs. We further tested our hypothesis by adding an enhanced US Air Force ontology framework to our ODIS in order to (1) process a collection of sensor data, intel reports, and mission plans; (2) build composite POR representations from these data; and (3) machine analyze the fused results to infer mission threats. (shrink)

Premature birth or low birth weight (LBW) is predictor of infant morbidity and mortality. Generally, infant with premature birth will be treated on incubator device. Incubator must provide stable levels of temperature, relative humidity and oxygen concentration. Temperature on infant incubator must be maintaned around 36°C-38°C. In order to control that, adaptive Fuzzy- PI controller is proposed and implemented on infant incubator’s prototype. This research use DHT11 sensor as sensing element and the control method are actuated by lightbulbs. The controller (...) used Microcontroller Atmega16 as processor which output determines the amount of power supplied to the lightbulb by employing pulse width modulation and MOSFET triggered circuit. Tests were carried out on temperature references that correspond to the standard incubator temperature range of 36°C to 38°C. References changes (fluctuatif reference) test and disturbances test were also carried out to prove system performance. The tests result on fixed reference temperatures were able to reach a stable setpoint with time rise (tr) around the 200 second with the highest overshoot maximum steady state error below 5%. References change tests and disturbances test successfully proved the controller was able to follow changes in references and overcome the disturbances. (shrink)

Wireless Sensors Network is a novel field shows tremendous application potential. To monitor the environmental parameters of high-tech polyhouse the Wireless Sensors Network (WSN) is developed. The heart of this ubiquitous field is the Wireless Sensor Node. Moreover, the field of microcontroller based embedded technology is innovative and more reliable. Therefore, based on an embedded technology and the RF module Zigbee a wireless senor node is designed about highly promising AVR ATmega8L microcontroller and implemented for WSN development. Recently, the modern (...) agriculturists are demanding sophisticated instrumentation for measurement and control of environmental parameters of the polyhouse. To enhance crop yield one has to provide controlled environment to the crop. The humidity is important parameter, which plays vital role on the crop yield. Therefore, a Wireless Sensors Network (WSN) is designed and implemented for monitoring of humidity of polyhouse and the results of implementation are interpreted in this paper. (shrink)

The antenna is considered as the primary means of absorbing electromagnetic waves in space and has its own engineering knowledge, which is very developed and extensive. In general, in order to receive the electromagnetic wave in space, the dimensions of the antenna must be in the order of the size of the input wavelength to its surface. Due to the very low dimensions of nano-sensors, nano-antennas need a very high operating frequency to be usable. The use of graphene greatly helps (...) to solve this problem. Wave propagation velocities in CNTs and GNRs can be up to 100 times slower than vacuum velocities, depending on the physical structure, temperature and energy. Accordingly, the resonant frequency of graphene-based nano-antennas can be twice as low as (nano-carbon) nano-antennas. (shrink)

Background: Smart sensors have been developed as diagnostic tools for rehabilitation to cover an increasing number of geriatric patients. They promise to enable an objective assessment of complex movement patterns. -/- Objective: This research aimed to identify and analyze the conflicting ethical values associated with smart sensors in geriatric rehabilitation and provide ethical guidance on the best use of smart sensors to all stakeholders, including technology developers, health professionals, patients, and health authorities. -/- Methods: On the basis of a systematic (...) literature search of the scientific databases PubMed and ScienceDirect, we conducted a qualitative document analysis to identify evidence-based practical implications of ethical relevance. We included 33 articles in the analysis. The practical implications were extracted inductively. Finally, we carried out an ethical analysis based on the 4 principles of biomedical ethics: autonomy, beneficence, nonmaleficence, and justice. The results are reported in categories based on these 4 principles. -/- Results: We identified 8 conflicting aims for using smart sensors. Gains in autonomy come at the cost of patient privacy. Smart sensors at home increase the independence of patients but may reduce social interactions. Independent measurements performed by patients may result in lower diagnostic accuracy. Although smart sensors could provide cost-effective and high-quality diagnostics for most patients, minorities could end up with suboptimal treatment owing to their underrepresentation in training data and studies. This could lead to algorithmic biases that would not be recognized by medical professionals when treating patients. -/- Conclusions: The application of smart sensors has the potential to improve the rehabilitation of geriatric patients in several ways. It is important that patients do not have to choose between autonomy and privacy and are well informed about the insights that can be gained from the data. Smart sensors should support and not replace interactions with medical professionals. Patients and medical professionals should be educated about the correct application and the limitations of smart sensors. Smart sensors should include an adequate representation of minorities in their training data and should be covered by health insurance to guarantee fair access. (shrink)

A hydraulic actuator is a system that can provide a large power amplification in industries and factories. In this paper, mass lifter hydraulic actuator system to a desired displacement is designed using optimal control theory. MPC and LQR controllers are used to design and improve the performance of the hydraulic actuator. The hydraulic actuator system is linearized using Taylor series linearization method and designed using Matlab/Simulink tool. Comparison of the hydraulic actuator with MPC and LQR controllers using three desired output (...) displacement signals (step, sine wave and white noise) is done and simulation results have been analyzed successfully. For the desired step input signal, the hydraulic actuator system with MPC controller lower rise and settling times with small percentage overshoot as compared to the hydraulic actuator system with LQR controller and for the desired sine wave signal, the hydraulic actuator system with MPC controller almost track the desired sine wave input signal correctly as compared to the hydraulic actuator system with LQR controller. While for the desired white noise input signal, the hydraulic actuator system with MPC controller have tried to track the desired white noise input signal with small variation in amplitude as compared to the hydraulic actuator system with LQR controller. Finally the comparative simulation results prove the effectiveness of the proposed hydraulic actuator system with MPC controller. (shrink)

In this paper, a capacitor microphone system is presented to improve the conversion of mechanical energy to electrical energy using a nonlinear auto regressive moving average-L2 (NARMA-L2) and model predictive control (MPC) controllers for the analysis of the open loop and closed loop system. The open loop system response shows that the output voltage signal need to be improved. The comparison of the closed loop system with the proposed controllers have been analyzed and a promising result have been obtained using (...) Matlab/Simulink. (shrink)

Artificial Intelligence and Sensor Technologies the Future of Special Education for Students with Intellectual and Developmental Disabilities.

Some cognitive processes appear to have “phenomenal” properties that are directly revealed to the subject and not determined by physical properties. I suggest that the source of this appearance is the method by which our brain processes sensory information. The appearance is an illusion. Nonetheless, we are not mistaken when we judge that people sometimes fee lpain.

Multi sensor data fusion allows large scale deployments for environmental monitoring applications especially in the areas like homes, other buildings and infrastructures and industries. In such areas early fire detection is of great importance as the consequences of a fire are catastrophic. This project predicts the possibility of catching fire using a multi-sensor scheme of data fusion to enhance the performance of the early fire detection process by detecting the concentration of inflammable gases in the atmosphere and by measuring the (...) atmospheric temperature. (shrink)

New technologies such as smart sensors improve rehabilitation processes and thereby increase older adults’ capabilities to participate in social life, leading to direct physical and mental health benefits. Wearable smart sensors for home use have the additional advantage of monitoring day-to-day activities and thereby identifying rehabilitation progress and needs. However, identifying and selecting rehabilitation priorities is ethically challenging because physicians, therapists, and caregivers may impose their own personal values leading to paternalism. Therefore, we develop a discussion template consisting of a (...) series of adaptable questions for the patient–physician encounter based on the capability approach. The goal is to improve geriatric rehabilitation and thereby increase participation in social life and well-being. To achieve this goal, we first analyzed what is considered important for participation on basis of the capability approach, human rights, and ethics of care. Second, we conducted an ethical analysis of each of the four identified dimensions of participation: political, economic, socio-cultural, and care. To improve compliance with rehabilitation measures, health professionals must align rehabilitation measures in an open dialogue with the patient’s aspiration for participation in each dimension. A discussion template based on the capability approach allows for a proactive approach in patient information and stimulates a critical assessment of treatment alternatives while reducing the risk of imposing personal values. (shrink)

The data collected by these sensors are transmitted to a centralized system where optimization algorithms, such as Genetic Algorithms (GA), Particle Swarm Optimization (PSO), and Simulated Annealing (SA), are applied to optimize sensor placement, data transmission, and processing efficiency. This ensures accurate, real-time pollution monitoring and data analysis, providing actionable insights for policymakers, environmental agencies, and the general public. The system's performance is evaluated through simulations and real-world experiments, demonstrating its capability to deliver reliable and timely pollution data. Future work (...) will explore the integration of machine learning techniques for predictive analytics and the expansion of the sensor network for broader coverage. (shrink)

The data collected by these sensors are transmitted to a centralized system where optimization algorithms, such as Genetic Algorithms (GA), Particle Swarm Optimization (PSO), and Simulated Annealing (SA), are applied to optimize sensor placement, data transmission, and processing efficiency. This ensures accurate, real-time pollution monitoring and data analysis, providing actionable insights for policymakers, environmental agencies, and the general public. The system's performance is evaluated through simulations and real-world experiments, demonstrating its capability to deliver reliable and timely pollution data. Future work (...) will explore the integration of machine learning techniques for predictive analytics and the expansion of the sensor network for broader coverage. (shrink)

Abstract—Traffic clog is a serious issue in the majority of the urban areas over the world and it has turned into a bad dream for the residents. It is brought about by postponement in flag, improper planning of traffic flagging and so on. The postponement of traffic light is hard coded and it doesn't depend on traffic. In this manner for streamlining traffic control, there is an expanding request in precise snappy programmed framework. This paper is intended to build up (...) a thickness based powerful traffic flag control. The flag timing changes naturally on detecting the traffic thickness at the junction. The microcontroller utilized in this undertaking is ARDUINO. The framework contains IR sensors (transmitter and collector) which will be mounted. It gets initiated and gets the flag as the vehicles passes near to it. (shrink)

Note: Many types of nanosensors are designed using CP nanomaterials for nanobiological applications. (Conductive surface) The oxidation of conductive polymeric materials is easily altered by redox mechanisms, and the charge transfer properties of these materials are affected by structural parameters, such as diameter and dimensions. CP materials are able to provide sensitive and rapid responses to specific biological and chemical species. Techniques such as chemical polymerization are often used to make CP nanomaterials. Manufacturing strategies can be divided into three categories: (...) hard mold synthesis, soft mold synthesis, and mold-free synthesis. The most widely used conductive polymers in nanosensors are nanomaterials made from CP due to their unique chemical and electrical properties resulting from the properties of their pie-electron nanosystem. Many modeling and functionalization technologies are being developed to control the location, distribution, amount, or structure and orientation of biological nanomolecules at the nanomaterial level. Therefore, our level of contact between biological nanomolecules and nanomaterials is of particular importance in countless applications. Covalent and non-covalent modifications are two general methods for coupling biological molecules and CP nanomaterials. Covalent functionalization is a chemical process in which a strong bond or relationship between nanomaterials and biological molecules is formed. In many cases, surface chemical modifications are required to create active groups that can bind to biomolecules. Unlike covalent functionalization, in the non-covalent method, nanomolecules can be removed without destroying the geometric and electronic structure on the surface. Nanomaterials are formed. Conclusion : The large surface-to-volume ratio in nanostructures and the high potential for signal amplification provide ideal conditions for marking and detecting biological elements in the structure of nanosensors. (shrink)

The advance of scientific approaches to life has recorded a plethora of successes as well as failures. Man being at the center of its experiment is tossed toe and fro by the result of its inquiry. Predictions are that in the nearest time, humanity might be living absolutely under the directives of Technology based on Artificial intelligence. At present, Technology based on Artificial Intelligence is quickly finding its way into various areas of life including health and social services. This spread (...) and or interplay connotes the relinquishing of health responsibilities from man to sensor technology as well as dependency on the data and result of this technology. This effort questions this unethical dependency as well as raises moral issues associated with the use of Technology base on artificial intelligence on psychiatric patient. It dabbles into medical values such as; autonomy of the patient cum consent, Kantian universal principle and its implication to implementing the universal usage of technology in mental health care services, and so on. The work of Patricia A. Arean (2016) titled Mobile Technology for Mental Health Assessment gave an in-depth analysis of the available approaches, doting advantages of sensor technology on psychiatric patient. The paper applied the analytic, descriptive and prescriptive method of philosophy to achieve its objective. To this end, it is in the view of this work imperative for the mental-medical community to consider reflectively these issues and the philosophic recommendations provided herein. (shrink)

t: Wireless Sensor Networks (WSNs) have become increasingly prevalent in various applications, ranging from environmental monitoring to smart cities. However, the limited energy resources of sensor nodes pose significant challenges in maintaining network longevity and data transmission efficiency. Duty-cycled WSNs, where sensor nodes alternate between active and sleep states to conserve energy, offer a solution to these challenges but introduce new complexities in data transmission.

nanological gates, in order to design nano-scale computers with dual-scale capabilities. All living biological systems function due to the molecular interactions of different subsystems. Molecular components (proteins and nucleic acids, lipids and carbohydrates, DNA and RNA) can be used as an inspirational strategy on how to design high-performance NEMS and MEMS that have the required features and characteristics. Considered. In addition, analytical and numerical methods are available for dynamic analysis and three-dimensional geometry, bonding and other properties of atoms and molecules. (...) Thus, electromagnetic and mechanical, and other physical and chemical properties can be studied. Nanostructures and nanosystems can be widely used in medicine and health. Possible applications of nanotechnology include: drug synthesis and drug delivery (therapeutic potential is greatly increased due to the effective direct delivery of new types of drugs to specific sites in the body), nanosurgery and nanotherapy Synthesis and detection of genomes, nano-scale stimuli and sensors (diagnosis and prevention of disease), design and implantation of non-rejection artificial organs and design of high performance nanomaterials. It is important that these technologies change the manufacture of materials, devices and systems. (shrink)

Abstract: The main objective is to design a line follower robot is to carry products in the manufacturing process in industries. In this paper, we mainly focused on the design to work the line follower efficiently with lighter weight. The line follower robot designed with 5 sensors to make the robot move in even complex paths. This paper discussed the mechanical and technical issues with the line follower robot and applications in various fields. In the working model, we used black (...) detector infrared sensors So that speed of response of the robot is high. This paper gives an brief idea about all the components used to prepare a line follower robot. (shrink)

A ventilator is a device that provides cool air by moving the air in or out of the lungs, inhaling a patient who is not fit to smell, or breathing properly. In this paper, a resistive chest belt sensorbased mechanical ventilator is designed to provide the COVID-19 patient with the volume of air you need to deliver with the expansion of the patient's chest in need of more air. The resistive band sensor senses the expansion of the patient's chest and (...) controls the solenoid valve attached to the oxygen compressor. The function of the respirator is tested with the MATLAB / Simulink tool with the help of a Proportional Integral Derivative (PID) Controller and a promising result obtained. (shrink)

In this study, an automatic heat dispel system for DINGSON Biscuit Oven have been designed and simulated using Proteus program successfully. This system uses thermocouple temperature sensor to sense the oven temperature and automatically open and close the dispel system. The temperature in which the dispel open and close can be adjusted any time the operator needs to adjust it.

We want here to suggest the hypothesis that the finalistic process inherent in the psyche as Jung describes it, is eminently of spiritual nature and "based" on the quantum-psychoid connection between the instinct of religiosity and the Self archetype. Which in our hypothesis evokes the possibility of a plausible extension of the Self quantum psychoid conception, with a series of consequences such as to believe it possible a development in quantum psychoid dimension of the analytical psychology itself.

Directed Diffusion (DD) uses data aggregation to suppress data overhead however there is no guarantee that paths from nearby sources join after a few hops. In this paper, an efficient data-gathering protocol (EDAP) is proposed to address this problem by using a Virtual Sink (VS) node nearby the sources, which plays the role of sink node and broadcasts local interest messages and routes gathered data toward destination. Also, multiple paths are constructed between VS and the sink node, which leads to (...) load-balancing, and increase in the lifetime of the network. Simulation results show that in EDAP a significant amount of energy can be saved and the network lifetime will be increased considerably. (shrink)

The chapter deals with the notion of phenomenal realness, which was first systematically explored by Albert Michotte. Phenomenal realness refers to the impression that a perceptual object is perceived to have an autonomous existence in our mind-independent world. Perceptual psychology provides an abundance of phenomena, ranging from amodal completion to picture perception, that indicate that phenomenal realness is an independent perceptual attribute that can be conferred to perceptual objects in different degrees. The chapter outlines a theoretical framework that appears particularly (...) well-suited for dealing with corresponding phenomena. According to this framework, perception can be understood as a triggering of conceptual forms by sensor inputs. It is argued that the attribute of phenomenal realness is based on specific types of internal evaluation functions which deal with the segregation of causes conceived as ‘external’ from those conceived as ‘internal’. These evaluation functions integrate different internal sources of ‘knowledge’ about the potential causes for the activation of conceptual forms and provide markers by which conceptual forms can be tagged as ‘external world objects’. (shrink)

Optimization algorithms such as Genetic Algorithms (GA) and Particle Swarm Optimization (PSO) are employed to determine the optimal aggregation and transmission schedules, taking into account factors such as network topology, node energy levels, and data urgency. The proposed approach is validated through extensive simulations, demonstrating significant improvements in energy consumption, packet delivery ratio, and overall network performance. The results suggest that the optimized aggregated packet transmission method can effectively extend the lifespan of duty-cycled WSNs while ensuring reliable data communication. Future (...) work will explore the integration of machine learning techniques for adaptive scheduling and the application of the proposed method to heterogeneous WSNs. (shrink)

Home management and controlling have seen a great introduction to network that enabled digital technology, especially in recent decades. For the purpose of home automation, this technique offers an exciting capability to enhance the connectivity of equipment within the home. Also, with the rapid expansion of the Internet, there are potentials that added to the remote control and monitoring of such network-enabled devices. In this paper, we had been designed and implemented a fully manageable and secure smart home automation system (...) based on a cloud computing system with an ESP Arduino system. The security of home had been improved by adding a complete camera system with a GSM communication technique to connect the Arduino output data to an external specified number if there is no internet provider. We used three sensors for temperature, gas, and motion measurements. The ESP8226 Wi-Fi device programmed the sensors to maintain the sensors measurements and transfer them to the cloud server database which is programmed to the web server via Appatshy and Mysql formats. The system implemented with high time response so that all readings updated and appeared spontaneously. The designed system should be effective, a secure, and rapid response real-time smart home system should be achieved. (shrink)

Deep learning algorithms are rapidly changing the way in which audiovisual media can be produced. Synthetic audiovisual media generated with deep learning—often subsumed colloquially under the label “deepfakes”—have a number of impressive characteristics; they are increasingly trivial to produce, and can be indistinguishable from real sounds and images recorded with a sensor. Much attention has been dedicated to ethical concerns raised by this technological development. Here, I focus instead on a set of issues related to the notion of synthetic audiovisual (...) media, its place within a broader taxonomy of audiovisual media, and how deep learning techniques differ from more traditional approaches to media synthesis. After reviewing important etiological features of deep learning pipelines for media manipulation and generation, I argue that “deepfakes” and related synthetic media produced with such pipelines do not merely offer incremental improvements over previous methods, but challenge traditional taxonomical distinctions, and pave the way for genuinely novel kinds of audiovisual media. (shrink)

To improve road dealing with and passenger consolation of a vehicle, a suspension system is supplied. An active suspension system is taken into consideration better than the passive suspension system. In this paper, an active suspension system of a linear quarter vehicle is designed, that's issue to exclusive disturbances on the road. Since the parametric uncertainty within the spring, the shock absorber and the actuator has been taken into consideration, robust control is used. H∞ and µ-Synthesis controllers of are used (...) to improve using consolation and road dealing with potential of the vehicle, in addition to confirm the sturdy stability and overall performance of the system. In the H∞ design, we designed a driving force for passenger consolation and to preserve the deflection of the suspension small and to reduce the disturbance of the road to the deflection of the suspension. For the µ synthesis system, we designed a controller with hydraulic actuator and uncertainty model. We designed a MATLAB / SIMULINK model for the active suspension system with the H∞ and µ-synthesis controllers we tested the use of 4 road disturbance inputs (bump, random, sinusoidal pavement and slope) for deflection of the suspension, body acceleration and body travel for passive, active suspension with controller and active suspension without controller. Finally, we evaluate the H∞ and µ-synthesis controllers with a Simulink model for suspension deflection, body acceleration and body travel simulation, and the result suggests that both designs offer correct overall performance, however the H∞ controller has superior overall performance as compared to the µ-synthesis controller. (shrink)

Purpose: The purpose of the discussion is to call for an experimental trial in order to optimize the sociology of knowledge in the astronomical and cosmological sciences from a cognitive science and developmental psychology perspective. The potential of such experimental trial may also correlate developmental psychology with cosmology and astrophysics, therefore, contribute to public health from an astrobiological perspective. -/- Method: The discussion adopts a philosophizing method for the multidisciplinary and trans-disciplinary proposal, with the hypothesis that proton decay in cosmology (...) is correlative to neuronal development in human biochemistry. The method adopts a humanitarian paradigm of pragmatism in natural mutation from cosmic changes, in an exploratory heuristics for hydro-sampling of mutational potentials from environmental factors in cosmological large-scale structure. -/- Result: With an initial assessment on existing technologies, the potentials of the big data trend in astronomy and astrophysics can be applied to data analysis with solid-state electrolytes in sensor baselines to nuclear medicine methods. (shrink)

In this paper a NARMA L2, model reference and neural network predictive controller is utilized in order to control the output flow rate of the steam in furnace by controlling the steam flow valve. The steam flow control system is basically a feedback control system which is mostly used in cement production industries. The design of the system with the proposed controllers is done with Matlab/Simulink toolbox. The system is designed for the actual steam flow output to track the desired (...) steam that is given to the system as input for two desired steam input signals (step and sine wave). In order to analyze the performance of the system, comparison of the proposed controllers is done by simulating the system for the two reference signals for the system with and without sensor noise disturbance. Finally the comparison results prove the effectiveness of the presented process control system with model reference controller. (shrink)

Gottfried Wilhelm Leibniz presents the idea of monads, as non-communicative, self-actuating system of beings that are windowless, closed, eternal, deterministic and individualistic. For him, the whole universe and its constituents are monads and that includes humans. In fact, any ‘body’, such as the ‘body’ of an animal or man has, according to Leibniz, one dominant monad which controls the others within it. This dominant monad, he often refers to as the soul. If Leibniz’s conception of monads is accepted, it merely (...) establishes human subjectivity, idiosyncrasies, biases, prejudices and individual points of view as the norm. How then do we ensure inter-subjectivity and the kind of social interaction requisite for the achievement of social order, since Leibniz’s system forecloses the possibility of interaction and communication among monads? In this essay, we argue that just as Leibniz’s monads synchronize only through the Supreme Monad (Monas Monadum), humans as social monads should also interact through a matrix of ideals like truth, honesty, sincerity, integrity, altruism, impartiality, compassion and trust. Since social order is actualised only within the context of linked social structures, relations and values, these utopian ideals would form the fulcrum through which humans relate and the very foundation that would anchor a viable social order. Our aim here is to establish a relationship between Leibniz’s metaphysics and the physical domains of life by showing that metaphysical constructs can impinge on human social relations and wellbeing. The study employed the qualitative method of research through critical analysis of texts, library and archival materials. (shrink)

Knill, Kersten, & Mamassian (Chapter 6) provide an interesting discussion of how the Bayesian formulation can be used to help investigate human vision. In their view, computational theories can be based on an ideal observer that uses Bayesian inference to make optimal use of available information. Four factors are important here: the image information used, the output structures estimated, the priors assumed (i.e., knowledge about the structure of the world), and the likelihood function used (i.e., knowledge about the projection of (...) the world onto the sensors). Knill & Kersten argue that such a framework not only helps analyze a perceptual task, but can also help investigators to define it. Two examples are provided (the interpretation of surface contour and the perception of moving shadows) to show how this approach can be used in practice. As the authors admit, most (if not all) perceptual processes are ill-suited to a "strong" Bayesian approach based on a single consistent model of the world. Instead, they argue for a "weak" variant that assumes Bayesian inference to be carried out in modules of more limited scope. But how weak is "weak"? Are such approaches suitable for only a few relatively low-level tasks, or can they be applied more generally? Could a weak Bayesian approach, for example, explain how we would recognize the return of Elvis Presley? The formal modelling of human perception To help get a fix on things, it is useful to examine the fate of an earlier attempt to formalize human perception: the application of information theory. It was once hoped that this theory—a close cousin of the Bayesian formulation—would provide a way to uncover information-handling laws that were largely independent of physical implementation. In this approach, the human nervous system was assumed to have.. (shrink)

To improve the street managing and passenger comfort of a vehicle, a suspension system is furnished. An active suspension device is considered to be better than the passive suspension device. In this paper, 2 degree of freedom of an active suspension system of a linear vehicle are designed, that's challenge to oneof-a-kind disturbances on the road. Since the parametric uncertainty inside the spring, the shock absorber, the mass and the actuator has been taken into consideration, robust control is used. In (...) this paper, H∞ and µ-synthesis controllers are used to enhance using consolation and the capability to force the car on the road. For the analysis of the time domain, a MATLAB script software become used and a check with 4 road disturbance inputs (bump, random, sinusoidal and harmonic) became carried out for suspension deflection, body acceleration and travel of the body for the energetic suspension with the H∞ controller and the active suspension with the µ-synthesis controller and the comparative simulation and the reference consequences display the effectiveness of the active suspension system with the µ-synthesis controller. (shrink)

The antenna is considered as the primary means of absorbing electromagnetic waves in space and has its own engineering knowledge, which is very developed and extensive. In general, in order to receive the electromagnetic wave in space, the dimensions of the antenna must be in the order of the size of the input wavelength to its surface. Due to the very low dimensions of nano-sensors, nano-antennas need a very high operating frequency to be usable. The use of graphene greatly helps (...) to solve this problem. Wave propagation velocities in CNTs and GNRs can be up to 100 times slower than vacuum velocities, depending on the physical structure, temperature and energy. Accordingly, the resonant frequency of graphene-based nano-antennas can be twice as low as (nano-carbon) nano-antennas. (shrink)

It is a matter of fact that Europe is facing more and more crucial challenges regarding health and social care due to the demographic change and the current economic context. The recent COVID-19 pandemic has stressed this situation even further, thus highlighting the need for taking action. Active and Assisted Living technologies come as a viable approach to help facing these challenges, thanks to the high potential they have in enabling remote care and support. Broadly speaking, AAL can be referred (...) to as the use of innovative and advanced Information and Communication Technologies to create supportive, inclusive and empowering applications and environments that enable older, impaired or frail people to live independently and stay active longer in society. AAL capitalizes on the growing pervasiveness and effectiveness of sensing and computing facilities to supply the persons in need with smart assistance, by responding to their necessities of autonomy, independence, comfort, security and safety. The application scenarios addressed by AAL are complex, due to the inherent heterogeneity of the end-user population, their living arrangements, and their physical conditions or impairment. Despite aiming at diverse goals, AAL systems should share some common characteristics. They are designed to provide support in daily life in an invisible, unobtrusive and user-friendly manner. Moreover, they are conceived to be intelligent, to be able to learn and adapt to the requirements and requests of the assisted people, and to synchronise with their specific needs. Nevertheless, to ensure the uptake of AAL in society, potential users must be willing to use AAL applications and to integrate them in their daily environments and lives. In this respect, video- and audio-based AAL applications have several advantages, in terms of unobtrusiveness and information richness. Indeed, cameras and microphones are far less obtrusive with respect to the hindrance other wearable sensors may cause to one’s activities. In addition, a single camera placed in a room can record most of the activities performed in the room, thus replacing many other non-visual sensors. Currently, video-based applications are effective in recognising and monitoring the activities, the movements, and the overall conditions of the assisted individuals as well as to assess their vital parameters. Similarly, audio sensors have the potential to become one of the most important modalities for interaction with AAL systems, as they can have a large range of sensing, do not require physical presence at a particular location and are physically intangible. Moreover, relevant information about individuals’ activities and health status can derive from processing audio signals. Nevertheless, as the other side of the coin, cameras and microphones are often perceived as the most intrusive technologies from the viewpoint of the privacy of the monitored individuals. This is due to the richness of the information these technologies convey and the intimate setting where they may be deployed. Solutions able to ensure privacy preservation by context and by design, as well as to ensure high legal and ethical standards are in high demand. After the review of the current state of play and the discussion in GoodBrother, we may claim that the first solutions in this direction are starting to appear in the literature. A multidisciplinary debate among experts and stakeholders is paving the way towards AAL ensuring ergonomics, usability, acceptance and privacy preservation. The DIANA, PAAL, and VisuAAL projects are examples of this fresh approach. This report provides the reader with a review of the most recent advances in audio- and video-based monitoring technologies for AAL. It has been drafted as a collective effort of WG3 to supply an introduction to AAL, its evolution over time and its main functional and technological underpinnings. In this respect, the report contributes to the field with the outline of a new generation of ethical-aware AAL technologies and a proposal for a novel comprehensive taxonomy of AAL systems and applications. Moreover, the report allows non-technical readers to gather an overview of the main components of an AAL system and how these function and interact with the end-users. The report illustrates the state of the art of the most successful AAL applications and functions based on audio and video data, namely lifelogging and self-monitoring, remote monitoring of vital signs, emotional state recognition, food intake monitoring, activity and behaviour recognition, activity and personal assistance, gesture recognition, fall detection and prevention, mobility assessment and frailty recognition, and cognitive and motor rehabilitation. For these application scenarios, the report illustrates the state of play in terms of scientific advances, available products and research project. The open challenges are also highlighted. The report ends with an overview of the challenges, the hindrances and the opportunities posed by the uptake in real world settings of AAL technologies. In this respect, the report illustrates the current procedural and technological approaches to cope with acceptability, usability and trust in the AAL technology, by surveying strategies and approaches to co-design, to privacy preservation in video and audio data, to transparency and explainability in data processing, and to data transmission and communication. User acceptance and ethical considerations are also debated. Finally, the potentials coming from the silver economy are overviewed. (shrink)

This article identifies and examines a tension in mental health researchers’ growing enthusiasm for the use of computational tools powered by advances in artificial intelligence and machine learning (AI/ML). Although there is increasing recognition of the value of participatory methods in science generally and in mental health research specifically, many AI/ML approaches, fueled by an ever-growing number of sensors collecting multimodal data, risk further distancing participants from research processes and rendering them as mere vectors or collections of data points. The (...) imperatives of the “participatory turn” in mental health research may be at odds with the (often unquestioned) assumptions and data collection methods of AI/ML approaches. This article aims to show why this is a problem and how it might be addressed. (shrink)

If we conceive of ourselves as animals, it might be accurate to call us visual animals. The visual cortex is much larger in us relative to the size of our brains than in other animals, and large relative to the parts of the cortex responsible for the transmission of signals emanating from the other perceptual transducers. Our ability to recall visual images, recombine them in imagination and enter imaginatively into narratives is linked to this evolved piece of brain architecture. (...) However, what this means within the context of human culture is not so clear. A large visual cortex might not necessarily translate into a heightened susceptibility for fine visual distinctions over auditory or kinetic distinctions, at least not in all cultural contexts. (shrink)

The foundation of a building connects the main body superstructure to the ground. Every form of foundation and footing have a unique application in a given location for a certain weather condition. Understanding the foundation work is crucial for carrying out building activities. Due to the variety of structures they support, foundations are frequently built in different subsoil conditions and are exposed to static loads. The proper evaluation of soil-bearing capacity is fundamental to the construction of various buildings. One of (...) the quick, easy, and affordable ways to determine soil carrying capacity is the plate load test. The effect of subsoil conditions on the test results is assessed and analyzed in thorough parametric investigations. An overview of axial static and dynamic plate load testing will be given in this study. This article presents detailed processes and schematics. In an effort to highlight the differences and shared characteristics of the results, computational test results of the static load plate test and the dynamic load plate test are contrasted. A load cell, a steel plate, a hydraulic actuator mounted on a big truck to apply a load, a load cell to measure the load, and one or more linear variable displacement transformers to measure the vertical displacements make up the test setup. The maximum thrust load that should be applied to a fixed or stationary actuator when it is not moving is known as a "static load depending on the actuator's static load capacity, we can determine what a safe load is. The maximum thrust load that should be applied to the actuator while it is moving is known as a dynamic load. Dynamic load capacity refers to how much force an actuator can exert when driven and extending or retracting. With each method's benefits and drawbacks considered, it can be determined that using them in various situations and agreeing to the confrontation of these tests for the purpose of comparing results is the best course of action in order to have a base that satisfies the construction standards. (shrink)

The role of the physiological processes involved in human vision escapes clarification in current literature. Many unanswered questions about vision include: 1) whether there is more to lateral inhibition than previously proposed, 2) the role of the discs in rods and cones, 3) how inverted images on the retina are converted to erect images for visual perception, 4) what portion of the image formed on the retina is actually processed in the brain, 5) the reason we have an after-image with (...) antagonistic colors, and 6) how we remember space. This theoretical article attempts to clarify some of the physiological processes involved with human vision. The global integration of visual information is conceptual; therefore, we include illustrations to present our theory. Universally, the eyeball is 2.4 cm and works together with membrane potential, correspondingly representing the retinal layers,photoreceptors, and cortex. Images formed within the photoreceptors must first be converted into chemical signals on the photoreceptors’ individual discs and the signals at each disc are transduced from light photons into electrical signals. We contend that the discs code the electrical signals into accurate distances and are shown in our figures. The pre-existing oscillations among the various cortices including the striate and parietal cortex,and the retina work in unison to create an infrastructure of visual space that functionally ‘‘places” the objects within this ‘‘neural” space. The horizontal layers integrate all discs accurately to create a retina that is pre-coded for distance. Our theory suggests image inversion never takes place on the retina,but rather images fall onto the retina as compressed and coiled, then amplified through lateral inhibition through intensification and amplification on the OFF-center cones. The intensified and amplified images are decompressed and expanded in the brain, which become the images we perceive as external vision. (shrink)

Recently, active suspension system will become important to the vehicle industries because of its advantages in improving road managing and ride comfort. This paper offers the development of mathematical modelling and design of a neural network control approach. The paper will begin with a mathematical model designing primarily based at the parameters of the active suspension system. A nonlinear three by four-way valve-piston hydraulic actuator became advanced which will make the suspension system under the active condition. Then, the model can (...) be analyzed thru MATLAB/Simulink software program. Finally, the NARMA-L2, model reference and predictive controllers are designed for the active suspension system. The results are acquired after designing the simulation of the quarter-car nonlinear active suspension system. From the simulation end result using MATLAB/Simulink, the response of the system might be as compared between the nonlinear active suspension system with NARMA-L2, model reference and predictive controllers. Besides that, the evaluation has been made between the proposed controllers thru the characteristics of the manage objectives suspension deflection, body acceleration and body travel of the active suspension system. . As a conclusion, designing a nonlinear active suspension system with a nonlinear hydraulic actuator for quarter car model has improved the car performance by using a NARMA-L2 controller. The improvements in performance will improve road handling and ride comfort performance of the active suspension system. (shrink)

This paper describes an AFOSR-supported basic research program that focuses on developing a new framework for combining hard with soft data in order to improve space situational awareness. The goal is to provide, in an automatic and near real-time fashion, a ranking of possible threats to blue assets (assets trying to be protected) from red assets (assets with hostile intentions). The approach is based on Conceptual Spaces models, which combine features from traditional associative and symbolic cognitive models. While Conceptual Spaces (...) are revolutionary, they lack an underlying mathematical framework. Several such frameworks have attempted to represent Conceptual Spaces, but by far the most robust is the model developed by Holender. His model utilizes integer linear programming in order to obtain an overall similarity value between observations and concepts that support the formation of hypotheses. This paper will describe a method for building Conceptual Spaces models for threats that utilizes ontologies as a means to provide a clear semantic foundation for this inferencing process; in particular threat ontologies and space domain ontologies are developed and employed in this approach. A space situational awareness use-case is presented involving a kinetic kill scenario and results are shown to assess the performance of this fusion-based inferencing framework. (shrink)

Air pollution is a significant environmental concern that affects human health, ecosystems, and climate change. Effective monitoring and management of outdoor air quality are crucial for mitigating its adverse effects. This paper presents an advanced approach to outdoor pollution measurement utilizing Internet of Things (IoT) technology, combined with optimization techniques to enhance system efficiency and data accuracy. The proposed framework integrates a network of IoT sensors that continuously monitor various air pollutants, such as particulate matter (PM), carbon monoxide (CO), sulfur (...) dioxide (SO₂), nitrogen dioxide (NO₂), and ozone (O₃), across different geographic locations. The data collected by these sensors are transmitted to a centralized system where optimization algorithms, such as Genetic Algorithms (GA), Particle Swarm Optimization (PSO), and Simulated Annealing (SA), are applied to optimize sensor placement, data transmission, and processing efficiency. This ensures accurate, real-time pollution monitoring and data analysis, providing actionable insights for policymakers, environmental agencies, and the general public. (shrink)

The article studies historically and systematically one of the most important aspects of Suárez’s metaphysics: the actualism, which consists in a reinterpretation of the Aristotelian doctrine of potency and act, which rejects the potency in its own sense and replaces it by the idea of an actuated potency (i.e., possessing an own being).

The Internet-of-Things (IoT) is gradually being established as the new computing paradigm, which is bound to change the ways of our everyday working and living. IoT emphasizes the interconnection of virtually all types of physical objects (e.g., cell phones, wearables, smart meters, sensors, coffee machines and more) towards enabling them to exchange data and services among themselves, while also interacting with humans as well. Few years following the introduction of the IoT concept, significant hype was generated as a result of (...) the proliferating number of IoT-enabled devices, which (according to many projections) are expected to amount to several billion in the next years. During recent years, this hype has been turning to reality, as a wave of IoT applications with significant social and economic has been emerging. Data analytics is the process of deriving knowledge from data, generating value like actionable insights from them. This article reviews work in the IoT and big data analytics from the perspective of their utility in creating efficient, effective and innovative applications and services for a wide spectrum of domains. We review the broad vision for the IoT as it is shaped in various communities, examine the application of data analytics across IoT domains, provide a categorization of analytic approaches and propose a layered taxonomy from IoT data to analytics. IoT data analysis is an integral element of any non- trivial IoT system. Nevertheless, IoT analytics are still in their infancy, as IoT data still remain largely unexploited. (shrink)