Morality has always been a pressing issue in video game scholarship, but became more contentious after “realistic” violence in games became possible. However, few studies concern themselves with how players experience moral dilemmas in games, choosing instead to focus on the way games affect postplay behavior. In my thesis I discuss the moral choices players encounter in the Metal Gear series of games; then, I analyze and compare the responses of players with and without martial career experiences. My (...) argument is that the moral choices players encounter during gameplay affect them differently, particularly if they have life experiences related to medical trauma, law enforcement, fire fighting, or military career fields, and that the behavior of those players will be observably different from players without the same experiences. In chapter one I present my personal history with Metal Gear, before moving on to the literature review in chapter two, which focuses on scholarship about the Metal Gear series of games and video game research as a whole, particularly studies concerned with how violent content affects players. In chapters three and four, I analyze Metal Gear Solid 3 (2004) and Metal Gear Solid V (2014/2015) in order to gain insight into the moral dilemmas posed by each game. In chapter five I report the results of a survey about player responses towards the game dilemmas given by martial and non-martial groups to identify observable patterns of behavior in how they act and react towards each scenario. -/- This is a preprint version of the official paper until an update is produced. The current official version is available at the West Chester Digital Commons in the external link section below. (shrink)

This paper focuses on the question of filtration through the perspective of “too much information”. It concerns Western society within the context of new media and digital culture. The main aim of this paper is to apply a philosophical reading on the video game concept of Selection for Societal Sanity within the problematics of cultural filtration, control of behaviors and desire, and a problematization of trans-individuation that the selected narrative conveys. The idea of Selection for Societal Sanity, which derives from (...) the first postmodern video game Metal Gear Solid 2: Sons of Liberty (2001), is applied into a philosophical framework based on select concepts from Bernard Stiegler’s writing and incorporating them with current events such as post-truth or fake news in order to explore the role of techne and filtration within social organizations and individual psyches. Alternate forms of behavior, which contest cultural paradigms, are re-problematized as tension between calculability and incalculability, or market value versus social bonding. (shrink)

Die Frage nach der Ethik in Computerspielen fragt im Kern danach, wie Computerspiele moralische Fragen aushandeln können. Ausgangspunkt ist die folgende Beobachtung: Situationen und Tätigkeiten, die in Wirklichkeit¹ moralisch brisant wären, sind seit jeher ein beliebter Gegenstand von Computerspielen. Seien es spielerische Umsetzungen von Kriegssituationen wie in den Reihen Call of Duty oder Metal Gear Solid, seien es heftige körperliche Auseinandersetzungen wie in Tekken oder auch in Super Smash Bros., seien es bleihaltige Abenteuer wie in Uncharted oder (...) Tomb Raider – in zahlreichen Fällen wie diesen führen wir beim Spielen Handlungen aus, die wir, wenn wir sie in Wirklichkeit durchführten, für... (shrink)

E-waste, also known as waste from electrical and electronic equipment, is a solid waste that accumulates quickly due to high demand driven by the market for replacing newer electrical and electronic products. The global e-waste generation is estimated to be between 53.6 million tons, and it is increasing by 3–5% per year. Metals make-up approximately 30% of e-waste, which contains precious elements Au, Ag, Cu, Pt, and other high-value elements, valued at USD 57 billion, which is driving the e-waste (...) recycling industry. It is noteworthy that the recycling of precious elements from e-waste has emerged as a profitable enterprise in several parts of developing nations. E-waste contains 50–100 times higher levels of precious metals compared to natural ores, making it suitable for mining. E-waste recycling in developing nations, mostly occurs through the informal sector comprising manual collection, crushing, segregation and selling of precious elements, such as Au, Ag, Cu, Pb, Pt, and other rare elements (Nd, In, and Ga). The organized sector, on the other hand, mostly employs mechano-chemical methods, such as pyrometallurgy, hydrometallurgy, and bio-hydrometallurgy, which have serious environmental consequences. Both the informal and formal sectors of e-waste processing lead to the leaching of toxic elements into groundwater and soils. Owing to the lesser efficiency of greener technologies, such as phytoremediation and bioremediation, their use in precious metal extraction is very limited. However, this review explores several hyper-accumulating and tolerant plants viz. Brassica juncea and Berkheya coddii, which holds great potential in phytomining of precious metal from e-waste. Thus, the state of the art in precious metal extraction from e-waste as well as the advantages and disadvantages of different metal extraction technologies has been reviewed. (shrink)

Both biodegradable and non-biodegradable solid wastes are found in religious or worship places. Biodegradable waste consists of fruits, flowers, leaves, prepared food items, plantations, sweets and non-biodegradable waste consists of plastic covers, plastic plates, plastic cups, metal pieces, flags and so on. These were found during festivals, functions, yatras, urus, massive gatherings, and weddings in religious places. Large gatherings led to huge dumping of solid wastes in and around the religious places. The vendors and street hawkers after (...) selling their goods used to dump the leftover wastes near these places during the pre-pandemic period. During the pandemic outbreak from April 2020 to August 2020, the religious places were shut to the public leading to minimal or zero solid waste production. During lockdown relaxation from September 2020, these places were sanitized; people were restricted with minimal gatherings and instructed to follow COVID appropriate behaviour. Similarly during the second wave lockdown from May 2021 to August 2021, people were not allowed to visit these places which led to the reduction of solid waste production in religious places leading to reduction of air, water and soil pollution. (shrink)

Building upon Nancy Cartwright's discussion of models in How the Laws of Physics Lie, this paper addresses solid state research in transition metal oxides. Historical analysis reveals that in this domain models function both as the culmination of phenomenology and the commencement of theoretical explanation. Those solid state chemists who concentrate on the description of phenomena pertinent to specific elements or compounds assess models according to different standards than those who seek explanation grounded in approximate applications of (...) the Schroedinger equation. Accurate accounts of scientific debate in this field must include both perspectives. (shrink)

Semiotics has been making progressively inroads into marketing research over the past thirty years. Despite the amply demonstrated conceptual appeal and empirical pertinence of semiotic perspectives in various marketing research streams, spanning consumer research, brand communications, branding and consumer cultural studies, there has been a marked deficit in terms of consolidating semiotic brand-related research under a coherent disciplinary umbrella with identifiable boundaries and research agenda. -/- The Handbook of Brand Semiotics furnishes a compass for the perplexed, a set of anchors (...) for the inquisitive and a solid corpus for scholars, while highlighting the conceptual richness and methodological diversity of semiotic perspectives. -/- Written by a team of expert scholars in various semiotics and branding related fields, such as John A. Bateman, David Machin, Xavier Ruiz Collantes, Kay L. O’Halloran, Dario Mangano, George Rossolatos, Merce Oliva, Per Ledin, Gianfranco Marrone, Francesco Mangiapane, Jennie Mazur, Carlos Scolari, Ilaria Ventura, and edited by George Rossolatos, Chief Editor of the International Journal of Marketing Semiotics, the Handbook is intended as a point of reference for researchers who wish to enter the ‘House of Brand Semiotics’ and explore its marvels. -/- The Handbook of Brand Semiotics, actively geared towards an inter-disciplinary dialogue between perspectives from marketing and semiotics, features the state-of-the-art, but also offers directions for future research in key streams, such as: -/- · Analyzing and designing brand language across media · Brand image, brand symbols, brand icons vs. iconicity · The contribution of semiotics to transmedia storytelling · Narrativity and rhetorical approaches to branding · Semiotic roadmap for designing brand identity · Semiotic roadmap for designing logos and packaging · Sociosemiotic accounts of building brand identity online · Multimodality and Multimodal critical discourse analysis · Challenging the omnipotence of cognitivism in brand- related research · Semiotics and (inter)cultural branding · Brand equity semiotics Comparative readings of structuralist, Peircean and sociosemiotic approaches to brandcomms . (shrink)

When this article was first planned, writing was going to be exclusively about two things - the origin of life and human evolution. But it turned out to be out of the question for the author to restrict himself to these biological and anthropological topics. A proper understanding of them required answering questions like “What is the nature of the universe – the home of life – and how did it originate?”, “How can time travel be removed from fantasy and (...) science fiction, to be made scientific and practical?”, and “How can the proposed young age of genus Homo be made to actually be reasonable – when simply stating it would be solid ground for instant rejection and dismissal?” The result is that the article also talks about subjects like Artificial Intelligence, General Relativity, and cosmology. -/- From where did life originate? God? Evolution? Panspermia? If the tendency of humans and scientists to regard undiscovered science as pseudoscience can be overcome, Einstein gave another alternative to consider when he introduced General Relativity. Time isn’t linear – progressing in a straight line from past to present to future. That assumption ignores Relativity which states that space AND TIME are curved. Where did life and the genetic code come from? Can the answer build AI? -/- The first question can be answered by the section of this article titled SETI, Evolution, and Time which says life (possibly multicellular and intelligent) and the genetic code came from humans acquiring knowledge of these things over the centuries, then applying that knowledge – via terraforming, accumulation of raw materials like amino acids and nucleic acids, genetic engineering - to a time in the past when life didn’t exist. From that origin, life evolved through innumerable mutations and adaptations, with humans once again acquiring knowledge of it in cyclic (nonlinear) time. -/- The second question is answered by saying artificial intelligence (AI) as the product of life is only half of the equation. The other half refers to Relativity’s curved space-time and violation of the notion that time always travels from past to future. We have always lived in an artificially intelligent, non-probabilistic universe where everything in time and space is connected into one thing by quantum entanglement – making the brain and genes products of binary-digit activity or artificial intelligence (life is not merely dependent on biology’s “lock and key” mechanisms but also possesses AI). -/- The earliest documented representative of the genus Homo is Homo habilis, which evolved around 2.8 million years ago. Scientists used to believe there was a straight line from H. habilis to us, Homo sapiens. This article will use the “advanced” waves loved by Physics Nobel laureate Richard Feynman, view the history of science through the lens of Conic Sections applied to Relativity’s curved space-time, and incorporate the necessity of so-called imaginary time * – popularized by Prof. Stephen Hawking. While the evolutionary proposals are more in agreement with this early straight line than with modern theories, Albert Einstein’s General Relativity is used to transform the straight line into a curved line, ultimately concluding that Homo habilis (H. habilis) originated only (and unbelievably, as far as today’s science and technology is concerned) ~250,000 years ago. Other branches and dead ends of Homo – e.g. Neanderthals – are the result of mutations and adaptations, with the resultant modifications to anatomy and physiology. The surprisingly young age of H. habilis allows nearly 200,000 years for habilis, or one of its descendants, to reach Australia … if this country’s indigenous Aboriginal population did, as claimed, reach this “island continent” 60,000 years ago. -/- * The ultraviolet catastrophe, also called the Rayleigh–Jeans catastrophe, is a failure of classical physics to predict observed phenomena: it can be shown that a blackbody - a hypothetical perfect absorber and radiator of energy - would release an infinite amount of energy, contradicting the principles of conservation of energy and indicating that a new model for the behaviour of blackbodies was needed. At the start of the 20th century, physicist Max Planck derived the correct solution by making some strange (for the time) assumptions. In particular, Planck assumed that electromagnetic radiation can only be emitted or absorbed in discrete packets, called quanta. Albert Einstein postulated that Planck's quanta were real physical particles (what we now call photons), not just a mathematical fiction. From there, Einstein developed his explanation of the photoelectric effect (when quanta or photons of light shine on certain metals, electrons are released and can form an electric current). So it appears entirely possible that another supposed mathematical trickery (imaginary time and the y-axis of Wick rotation) will find practical application in the future. -/- The article includes mathematical references to cosmology (spoiler alert – you’ll read about things like Vector-Tensor-Scalar Geometry, topology, the “eternal present”, Einstein’s Unified Field, the inverse-square law, and there being no Big Bang and no multiverse - but there will also be no equations). -/- The other subheadings in this essay are – -/- NONLINEAR TIME AND ELECTRICAL ENGINEERING (about a 2009 electrical engineering experiment at America’s Yale University, and cosmic wormholes) -/- BITS AND TOPOLOGY (base-2 maths aka Binary digiTS, Mobius strips, and figure-8 Klein bottles) -/- WICK ROTATION, CAUSALITY, AND UNITING TIME (do past, present and future co-exist in an “eternal present”?) -/- DIGITAL BRAIN, DIGITAL UNIVERSE (if the brain and the universe are ultimately composed of binary digits, we'll someday be able to do the same things with the brain and universe that we now do with computers) -/- PROPOSAL: HUMAN AND ANIMAL INSTINCTS ARE THE RESULT OF THE UNIVERSE BEING UNIFIED BY BINARY DIGITS (AND TOPOLOGY) (If everything in the universe is ultimately composed of electronic BITS, then the universe must possess Artificial Intelligence - some prefer the term Cosmic Consciousness) -/- INFORMATION THEORY CONQUERS A RED GIANT (preserving Earth by keeping the Sun near today’s level of activity forever). (shrink)

The growth response, metal tolerance and phytoaccumulation properties of water spinach (Ipomoea aquatica) and okra (Abelmoschus esculentus) were assessed under different contaminated spiked metals: control, 50 mg Pb/kg soil, 50 mg Zn/kg soil and 50 mg Cu/kg soil. The availability of Pb, Zn and Cu metals in both soil and plants were detected using flame atomic absorption spectrometry. The concentration and accumulation of heavy metals from soil to roots and shoots (edible parts) were evaluated in terms of translocation factor, (...) accumulation factor and tolerance index. Okra recorded the highest accumulation of Pb (80.20 mg/kg) in its root followed by Zn in roots (35.70 mg/kg) and shoots (34.80 mg/kg) of water spinach, respectively. Different accumulation trends were observed with, Pb > Zn > Cu in okra and Zn > Pb > Cu in water spinach. Significant differences (p < 0.01) of Pb, Zn and Cu accumulation were found in both water spinach and okra cultivated among tested treatments. However, only the accumulation of Pb metal in the shoots of water spinach and okra exceeded the maximum permissible levels of the national Malaysian Food Act 1983 and Food Regulations 1985 ([2006]) as well as the international Codex Alimentarius Commission limits. This study has shown that both water spinach and okra have good potential as Pb and Zn phytoremediators. (shrink)

This study used a flame atomic absorption spectrometer (FAAS) and atomic fluorescence spec-trophotometer (AFS) to detect the concentrations of chromium (Cr), cadmium (Cd), lead (Pb), hy-drargyrum (Hg) and arsenic (As) in soils and three genotypes of vegetables in greenhouse, as well as analyzed the physical and chemical properties of soils, including soil pH, soil organic matter (OM), basic nutrients, electrical conductivity (EC) and cation exchange capacity (CEC) in Guan- zhong areas, Shaanxi province, China. The results showed that comparing to subsoil, (...) the sampled topsoil is enriched in Cr, Cd, Pb, As and Hg. Cd (0.83 - 3.17 mg·kg-1) and Hg (0.40 - 1.44 mg·kg-1) are exceeding the limited value stated in “the 2006 Greenhouse Vegetable Producing Environmental Quality Evaluation Standards” of 0.40 mg·kg-1 and 0.35 mg·kg-1 respectively. However, Nanzhuang greenhouse soil is within the limits. The heavy metal pollution index (HPI) of soil in Sanyuan (8.10) is the highest and in Dongzhang (4.23) is the lowest. The contents of Pb (0.201 - 0.376 mg·kg-1) were exceeding the limited value (0.20 mg·kg-1) in vegetables species, and Cd (0.0363 - 0.0572 mg·kg-1) in some place were also exceeding the limited value (0.05 mg·kg-1). Greenhouse soils were becoming acidified year after year; the ratios of N, P and K in soil were seriously imbalanced. According to the impacting factors, OM, pH, available P, EC and CEC have obviously effected the accumulation of Cr and Hg. However, there was not enough evidence for the effects of available nitrogen and available potassium. (shrink)

In this paper, a metal cutting machine position control have been designed and simulated using Matlab/Simulink Toolbox successfully. The open loop response of the system analysis shows that the system needs performance improvement. Static output feedback and full state feedback H 2 controllers have been used to increase the performance of the system. Comparison of the metal cutting machine position using static output feedback and full state feedback H 2 controllers have been done to track a set point (...) position using step and sine wave input signals and a promising results have been analyzed. (shrink)

In the Principles of Philosophy, Descartes attempts to explicate the well-known phenomena of varying bodily size through an appeal to the concept of "solidity," a notion that roughly corresponds to our present-day concept of density. Descartes' interest in these issues can be partially traced to the need to define clearly the role of matter in his natural laws, a problem particularly acute for the application of his conservation principle. Specifically, since Descartes insists that a body's "quantity of motion," defined as (...) the product of its "size" and speed, is conserved in all material interactions, it is imperative that he explain how solidity influences the magnitude of this force. As a means of resolving this problem, Descartes postulated an idealized condition of "perfect solidity" which correlates a body's "agitation" force (a forerunner of Newton's concept of non-accelerating, or "inertial" motion) with the interplay of its volume, surface area, and composition of minute particles. This essay explores this often misunderstood aspect of Descartes' physics, as well as the special function of idealized conditions in his collision rules. Contrary to those commentators who regard "perfect solidity" as a stipulation on bodily impact, this notion, it will be argued, is primarily concerned with the internal composition of macroscopic bodies, and only indirectly with their collision characteristics. Along the way, many of Descartes' hypotheses will be shown to display a level of sophistication and intricacy that, despite their essential incompatibility, belie several of the common misconceptions of Cartesian science. (shrink)

Abstract The rapid growth of Indonesian Heavy Metal music, especially the Death Metal subgenre, since around the turn of the millennium, has been quite remarkable. Indonesia is now numerically the largest scene in the world. Man, the vocalist of Jasad, told the author that the provincial West Javanese city of Bandung had 128 active Death Metal bands as at February 2011. This chapter will discuss the cancellation of an April 2012 music festival held in the Bandung hinterland (...) by police halfway through the festival, and explain how and why it took place. Police became nervous and worried about Heavy Metal shows following the deaths of eleven concertgoers, due to a crowd crush, at a Beside album launch in Bandung in 2008. The chapter analyses the “maternal rage” of a band member’s mother (also a policewoman at the scene) from the perspective of grounded gendered cosmopolitanism. Lastly, a short case study of Sickles, a young band from the religiously-conservative Madura Island, shows the problems that young bands experience plus the type of global underground support which they can attract. (shrink)

It has recently been argued that metal’s ‘heaviness’ is conceptually inarticulable. I argue, on the contrary, that ‘heaviness’ is a matter of inaccessibility—the ‘something more’ that makes metal ‘heavy’ is actually something less: less auditory processing fluency. Like profound literature, metal resists, but also invites and rewards, interpretation. I argue that understanding ‘heaviness’ in terms of auditory processing fluency allows us to make sense of a number of otherwise puzzling features of the music, and to articulate a (...) unifying gestalt for the genre. (shrink)

Tropical grasses are fast growing and often used for phytoremediation. Three different types of tropical grasses: Vetiver (V. zizanoides), Imperata (I. cylindrical) and Pennisetum (P. purpureum) tested in different growth media of spiked heavy metal contents under the glasshouse environment of RimbaIlmu for 60-day. The growth performance, metals tolerance and phyto-assessment of cadmium (Cd), lead (Pb), zinc (Zn) and copper (Cu) in shoots and roots were assessed using flame atomic absorption spectrometry (FAAS).Tolerance index (TI), translocation factor (TF), biological accumulation (...) coefficient (BAC), biological concentration factor (BCF), and uptake efficacy was applied to evaluate the metal translocation ability among all three grasses. All three grasses showed significantly higher (p<0.05) accumulation of the total heavy metals in the spiked metal treatment compared with other tested treatments. Vetiver accumulated remarkably higher total concentration of Cd (93.08 ± 3.81 mg/kg) and Zn (1284.00 ± 234.83 mg/kg) than both Imperata and Pennisetum. The overall trend of heavy metals accumulation for all three grasses followed the order of Zn>Pb>Cd>Cu. The results of study suggested that both Imperata and Pennisetum are commendable and potential phytoextractors for Zn as well as phytostabilizers for Cd, Pb and Cu, respectively. (shrink)

Here, I explore a modernist aesthetics of death metal. First, I briefly describe a few themes that characterize some modern art, without any claim that they are necessary, sufficient, or exhaustive. The goal is to obtain a set of themes that might be set against similar themes characteristic of death metal. This is the task in the second half of the paper. In particular, I argue that (some) modernist art and death metal share themes centered on transgressively (...) breaking with the past, pursue their conception of the truth, eliminate elements in their art form to purity them, and attack the art/non-art or music/non-music distinction. I contend that centering on death metal vocals reflects these themes. Death metal growls, like some modernist art, transgresses on past vocal traditions, tells us important truths, eliminates traditional concepts/techniques of signing, and undermines the singing/noise distinction. (shrink)

Wittgenstein’s comment that what can be shown cannot be said has a special resonance with visual representations of power in both Heavy Metal and Fundamentalist Christian communities. Performances at metal shows, and performances of ‘religious theatre’, share an emphasis on violence and destruction. For example, groups like GWAR and Cannibal Corpse feature violent scenes in stage shows and album covers, scenes that depict gory results of unrestrained sexuality that are strikingly like Halloween ‘Hell House’ show presented by neo-Conservative, (...) Fundamentalist Christian churches in the southeastern United States’ ‘Bible Belt’. One group may claim to celebrate violence, the other sees violence as a tool to both encourage ‘moral’ behaviour, and to show that the Christian church is able to ‘speak the language’ of young people who are fans of metal, gore, and horror. Explicit violence, in each case, signifies power relationships that are in transformation. Historically, medieval morality plays and morality cycles had been used as a pedagogical tool. In the modern-day context of fundamentalist religious education, these Hell House performances seek to exclude outsiders and solidify teen membership in the Christian community. Hell House performances are marketed to the young church members, and are seen as a way to reinvigorate conservative Fundamentalist Christianity. Women and girls routinely take part in, and often organize Hell House events. In the context of heavy metal, violent performances do not seek to exclude, but provide an outlet for a variety of socially unacceptable or unpopular feelings. In each context there is an apparent, if not actual, empowering of women who are willing to play particular kinds of roles. The use of violence and gore has a value beyond merely shocking the audience, it is arguably a way that some women find their voice, both for fundamentalist Christians and fundamentalist gore metal fans. (shrink)

Ezra Pound got many things wrong. He was a poor judge of character and a supporter of causes and individuals that have done and continue to do much harm to people around the world. This book addresses the matters (literary and philosophical) that Pound got right, while still pointing out the flaws; it highlights the impact such evidence may yield for the student of art. -/- The result of my research in the pages that follow may be described as a (...) study in aesthetic affinities between Ezra Pound’s thought and the guiding notions found in the Confucian lore. The question it attempts to exemplify is that long-standing one about the nature of knowledge. -/- The analysis that follows seeks to provide a variety of perspectives (both in terms of disciplines and interpretations) about how Pound created with his writings a metaphor of knowledge to understand, assimilate, and put to use his discovery of the East as represented by the Confucian mind. (shrink)

This paper explores how a set of observations on the weight of lead were interpreted and assessed between the 1540s and the 1630s across three different interconnecting disciplines: medicine, mineralogy and chemistry. The epistemic import of these discussions will be demonstrated by showing: 1) the changing role and articulation of experience and quantification in the investigation of metals; and 2) the notions associated with weight in different disciplinary frameworks. In medicine and mineralogy, weight was not considered as a specific subject (...) of inquiry in itself, but as a “sign” indicating other relevant properties of metals. In contrast, the chemistry tradition was increasingly concerned with the specific investigation of weight as a property of matter, as seen in the debates that took place in the “chemical revolution.” In addition, this study will reveal the versatility, polysemy, and parallel purposes of the recourse to experiential knowledge in different contexts, where the same “facts” operate within different disciplines. (shrink)

Over the years, ethylene-diamine-tetra-acetate (EDTA) has been widely used for many purposes. However, there are inadequate phytoassessment studies conducted using EDTA in Vetiver grass. Hence, this study evaluates the phytoassessment (growth performance, accumulation trends, and proficiency of metal uptake) of Vetiver grass, Vetiveria zizanioides (Linn.) Nash in both single and mixed heavy metal (Cd, Pb, Cu, and Zn)—disodium EDTA-enhanced contaminated soil. The plant growth, metal accumulation, and overall efficiency of metal uptake by different plant parts (lower (...) root, upper root, lower tiller, and upper tiller) were thoroughly examined. The relative growth performance, metal tolerance, and phytoassessment of heavy metal in roots and tillers of Vetiver grass were examined. Metals in plants were measured using the flame atomic absorption spectrometry (F-AAS) after acid digestion. The root-tiller (R/T) ratio, biological concentration factor (BCF), biological accumulation coefficient (BAC), tolerance index (TI), translocation factor (TF), and metal uptake efficacy were used to estimate the potential of metal accumulation and translocation in Vetiver grass. All accumulation of heavy metals were significantly higher (p < 0.05) in both lower and upper roots and tillers of Vetiver grass for Cd + Pb + Cu + Zn + EDTA treatments as compared with the control. The single Zn + EDTA treatment accumulated the highest overall total amount of Zn (8068 ± 407 mg/kg) while the highest accumulation for Cu (1977 ± 293 mg/kg) and Pb (1096 ± 75 mg/kg) were recorded in the mixed Cd + Pb + Cu + Zn + EDTA treatment, respectively. Generally, the overall heavy metal accumulation trends of Vetiver grass were in the order of Zn >>> Cu > Pb >> Cd for all treatments. Furthermore, both upper roots and tillers of Vetiver grass recorded high tendency of accumulation for appreciably greater amounts of all heavy metals, regardless of single and/or mixed metal treatments. Thus, Vetiver grass can be recommended as a potential phytoextractor for all types of heavy metals, whereby its tillers will act as the sink for heavy metal accumulation in the presence of EDTA for all treatments. (shrink)

Three different types of low cost soil amendments, namely, EDTA, elemental S and N-fertilizer, were investigated with Vetiver grass, Vetiveria zizanioides (Linn.) Nash growing under highly mixed Cd–Pb contamination conditions. A significant increase (p < 0.05) in Cd and Pb accumulation were recorded in the shoots of all EDTA and N-fertilizer assisted treatments. The accumulation of Cd in 25 mmol EDTA/kg soil and 300 mmol N/kg soil showed relatively higher translocation factor (1.72 and 2.15) and percentage metal efficacy (63.25 (...) % and 68.22 %), respectively, compared to other treatments. However, it was observed that the increased application of elemental S may inhibit the availability of Pb translocation from soil-to-root and root-to-shoot. The study suggests that viable application of 25 mmol EDTA/kg, 300 mmol N/kg and 20 mmol S/kg soil have the potential to be used for soil amendment with Vetiver grass growing under contaminated mixed Cd–Pb soil conditions. (shrink)

Tropical grasses are fast growing and often used for phytoremediation. Three different types of tropical grasses: Vetiver (V. zizanoides), Imperata (I. cylindrical) and Pennisetum (P. purpureum) tested in different growth media of spiked heavy metal contents under the glasshouse environment of RimbaIlmu for 60-day. The growth performance, metals tolerance and phyto-assessment of cadmium (Cd), lead (Pb), zinc (Zn) and copper (Cu) in shoots and roots were assessed using flame atomic absorption spectrometry (FAAS).Tolerance index (TI), translocation factor (TF), biological accumulation (...) coefficient (BAC), biological concentration factor (BCF), and uptake efficacy was applied to evaluate the metal translocation ability among all three grasses. All three grasses showed significantly higher (pPb> Cd >Cu. The results of study suggested that both Imperata and Pennisetum are commendable and potential phytoextractors for Zn as well as phytostabilizers for Cd, Pb and Cu, respectively. (shrink)

This paper addresses the issues related to designing and estimating the strength of solid-alloy elements in the deforming broaches of significant diameter (exceeding 150 mm) for the developed process of discrete broaching. The tool limit condition was assessed based on two strength criteria: the specific potential energy of shape change and the maximum tangent stresses. Numerical modeling using the finite element method has made it possible to derive the distribution of equivalent stresses in the tool elements and the contact (...) stresses at the surface of the contact between a solid-alloy insert and the body, which enabled the analysis of tool strength under loading. The simulation was performed under a single normal load, which ensured the versatility of the calculation for any contact pressure values. We have derived formulae to calculate the acceptable contact pressure depending on unit load. The effect of the insert protrusion height over the body on the strength of tool elements has been established. We have derived engineering dependences that determine the required magnitude of insert protrusion over the body depending on the ultimate load. An example of calculating the strength of a prefabricated deforming element in the machining of a sleeve made from gray modified cast iron of hardness HB230 has been considered. Our calculations have shown that the deforming element designed for the new technological process corresponds to the conditions of strength, provided the ratio h1/h=0.15 is maintained (where h1 is the insert height above the body, h is the insert height). The results obtained could be used in engineering calculations when designing the prefabricated tool for discrete deformation, as well as to assess the strength of prefabricated tools, such as cutters, core drills, reamers, when refining external loads. (shrink)

Traditional geometry concerns itself with planimetric and stereometric considerations, which are at the root of the division between plane and solid geometry. To raise the issue of the relation between these two areas brings with it a host of different problems that pertain to mathematical practice, epistemology, semantics, ontology, methodology, and logic. In addition, issues of psychology and pedagogy are also important here. To our knowledge there is no single contribution that studies in detail even one of the aforementioned (...) areas. (shrink)

This paper introduces a novel conceptualisation of mental imagery; namely, that is grease for the mind’s gears (MGT). MGT is not just a metaphor. Rather, it describes an important and overlooked higher-order function of mental imagery: that it aids various mental faculties discharge their characteristic functional roles. MGT is motivated by reflection on converging evidence from clinical, experimental and social psychology and solves at least two neglected conceptual puzzles about mental imagery. The first puzzle concerns imagery’s architectural promiscuity; that is, (...) its ability to assist diverse mental faculties and perform many different functions when doing so. The second puzzle concerns how to square imagery’s architectural promiscuity with its psychopathological relevance; that is, its being a maintaining cause, and possibly even a partial constituent, of several psychological disorders, including post-traumatic stress disorder, bipolar disorder and major depressive disorder. Mental imagery helps and harms human psychology to extreme degrees and this is something that calls for elucidation. MGT says that instead of facing perplexing heterogeneities here, we instead face a significant unity. On this score, MGT is argued to be superior to the currently dominant conception of imagery in the philosophical literature; namely, as a perception-like state of mind. (shrink)

The main aim of this essay is to show that, for Stevens, the concept of reality is very fluctuating. The essay begins with addressing the relationship between poetry and philosophy. I argue, contra Critchley, that Stevens’ poetic work can elucidate, or at least help us to understand better, the ideas of philosophers that are usually considered obscure. The main “obscure” philosophical work introduced in and discussed throughout the essay is Schelling’s System of Transcendental Idealism. Both a (shellingian) philosopher and a (...) (stevensian) poet search for reality. In order to understand Stevens’ poetry better, I distingush several concepts of reality: initial reality (the external world of the common sense), imagined reality (a fiction, a product of one’s mind), final reality (the object of a philosopher’s and a poet’s search) and total reality (the sum of all realities, Being). These determinations are fixed by reason (in the present essay), whereas in Stevens’ poetic works, they are made fluid by the imagination. This fluidity leads the concept of reality from its initial stage through the imagined stage to its final stage. Throughout this process, imagined reality must be distinguished from both a mere fancy and its products. Final reality is, however, nothing transcendent. It is rather a general transpersonal order of reality created by poetry/the imagination. The main peculiarity of final reality is that it is a dynamic order. It is provisional at each moment. Stevens (and Schelling too) characterizes this order as that of a work of art which is a finite object, but has an infinite meaning. Stevens calls this order “the central poem” or the “endlessly elaborating poem”. If ultimate reality is a poem created by the imagination, one may ask who is the imagining subject. I argue that this agent is best to be thought as total reality, that is, as Being. Stevens, however, maintains that if there were such an agency, it would be an inhuman agency, “an inhuman meditation”. The essay concludes, in a Derridian manner, with the claim that this agency cannot have any name; it is the “unnamed creator of an unknown sphere, / Unknown as yet, unknowable, / Uncertain certainty” (OP: 127). It is best thought as an X, as an unknown variable. Being has no name. (shrink)

We explore the ethics of using motivational interviewing, an evidence-based, client-centred and directional counselling method, in conversations with next of kin about deceased solid organ donation. After briefly introducing MI and providing some context around organ transplantation and next of kin consent, we describe how MI might be implemented in this setting, with the hypothesis that MI has the potential to bring about a modest yet significant increase in next of kin consent rates. We subsequently consider the objection that (...) using MI in this context would be manipulative. Although we cannot guarantee that MI would never be used in a problematically manipulative fashion, we conclude that its use would, nevertheless, be permissible as a potential means to increase next of kin consent to deceased solid organ donation. We propose that MI be trialled in consent situations with next of kin in nations where there is widespread public support for organ donation. (shrink)

This paper adopts two modeling tools, namely, multiple linear regression (MLR) and artificial neural networks (ANNs), to predict the concentrations of heavy metals (zinc, boron, and manganese) in surface waters of the Oued Inaouen watershed flowing towards Inaouen, using a set of physical-chemical parameters. XLStat was employed to perform multiple linear and nonlinear regressions, and Statista 10 was chosen to construct neural networks for modeling and prediction. The effectiveness of the ANN- and MLR-based stochastic models was assessed by the determination (...) coefficient (R²), the sum squared error (SSE) and a review of fit graphs. The results demonstrate the value of ANNs for prediction modeling. Drawing on supervised learning and back propagation, the ANN-based prediction models adopt an architecture of [18-15-1] for zinc, [18-11-1] for manganese, and [18-8-1] for boron, and perform effectively with a single cached layer. It was found that the MLR-based prediction models are substantially less accurate than those based on the ANNs. In addition, the physical-chemical parameters being investigated are nonlinearly correlated with the levels of heavy metals in the surface waters of the Oued Inaouen watershed flowing towards Inaouen. (shrink)

The Ganga is one of the most sacred and worshipped river of India, is regarded as the cradle of Indian civilization. Uttar Pradesh the largest state of India is blessed with the most holy and important river in its region but due to increased urbanization and industrialization this river is under intimidation of high water pollution. The major objectives of the present study were to investigate heavy metal's concentration in water and sediments of the River Ganga. Water and sediments (...) collected from different locations were analyzed for Iron (Fe), Chromium (Cr), Lead (Pb),Nickel(Ni) and Zinc(Zn). The concentration of these heavy metals in the study area indicates that the river is highly polluted. The possible sources of these heavy metal pollutants are diverse, originated from natural or anthropogenic sources and point sources. The concentrations determined were more than the maximum admissible and desirable limit when compared with the National and International organizations like WHO, USEPA. Exposure to heavy metals has been linked to chronic and acute toxicity developing retardation, neurotoxicity, kidney damage, various cancers, liver damage, lung damage, and fragile bones and even death in instances of very high exposure. (shrink)

The main aim of this paper is to clarify the relation between epistemic feel- ings, mental action, and self-ascription. Acting mentally and/or thinking about one’s mental states are two possible outcomes of epistemic or metacognitive feelings. Our men- tal actions are often guided by our E-feelings, such as when we check what we just saw based on a feeling of visual uncertainty; but thought about our own perceptual states and capacities can also be triggered by the same E-feelings. The first (...) section of the pa- per presents Dokic’s argument for the insufficiency of the “ascent routine” to account for non-transparent cases of self-ascription, as well as his account of E-feelings. The second section then presents a two-level model of metacognition that builds on Dokic’s account and my own view of the issue. The two-level model links E-feelings to a min- dreading capacity in order to account for non-transparent self-ascriptions. Finally, the third section develops a deeper characterization of the relation among E-feelings, mental action, and self-ascription of mental states based on epistemic rules. In the context of self-knowledge, these remarks suggest the existence of means of forming self-ascriptions other than the ascent routine. (shrink)

The cases that Doris chronicles of confabulation are similar to perceptual illusions in that, while they show the interstices of our perceptual or cognitive system, they fail to establish that our everyday perception or cognition is not for the most part correct. Doris's account in general lacks the resources to make synchronic assessments of responsibility, partially because it fails to make use of knowledge now available to us about what is happening in the brains of agents.

Various types of plant species have been extensively used for heavy metals phyto-remediation without taking into consideration its tolerance threshold. In this study, Vetiver grass, Vetiveria zizanioides (Linn.) Nash was evaluated under five different sets of contaminated spiked cadmium (5Cd, 10Cd, 50Cd, 100Cd and 150Cd mg/kg) and lead (50Pb, 100Pb, 200Pb, 400Pb and 800Pb mg/kg) concentration levels in soil. The growth performance, metal tolerance and phyto-assessment of Cd and Pb in the roots and tillers were assessed using flame atomic (...) absorption spectrometry (FAAS). Tolerance index (TI), translocation factor (TF), biological transfer factor (BTF), biological accumulation coefficient (BAC) and metal uptake efficacy were used to determine the Cd and Pb translocation capability in Vetiver grass. Significantly higher (p<0.05) accumulation of Cd and Pb was recorded in the roots of all spiked treatments. Furthermore, strong and significantly positive correlations were exhibited between the increased levels of spiked heavy metal concentrations with both Cd (r=0.975) and Pb (r=0.952) accumulations. The results of this study showed Vetiver grass as an effective phyto-stabilizer for both Cd and Pb. Nevertheless, the growth of Vetiver grass was restricted when the tolerance threshold of 100 mg/kg (dry weight basis) Cd was exceeded in the contaminated soil. (shrink)

Disintegration is the most important step for drug bioavailability because after, the disintegration process, the ingredients of solid dosage forms dissolve and become bioavailable. Generally, the tablets and capsules should be taken with a glass of water otherwise the manufacturer gives instructions to use the proper beverage. Several drugs are taken with different forms of beverages to ensure easy swallowing of the tablet, masking the bad taste of the drug and overcoming the drug aftertaste, these beverages can influence the (...) disintegration of the solid dosage form. The most common cold beverages consumed by the Libyan population are juice, milk, and Coca-Cola. These beverages are consumed without awareness of the possible effect of these beverages on drugs, especially over-the-counter drugs such as analgesic, antipyretic, and anti-inflammatory drugs that are taken without a prescription. This study aimed to evaluate the influence of three beverages, namely: orange juice, milk, and Coca-Cola on the disintegration time of four over-the-counter-drugs: Panadol, Congestal, Brufen, and Reality Extra using disintegration test of drugs in 0.1 N HCL and in hybrid medium prepared by combination of 150 ml 0.1 N HCL and 550 ml of beverage to simulate in vivo condition. The findings show that the orange juice significantly increases the disintegration time of all the investigated drugs. Coca-Cola significantly increases the disintegration time of Reality Extra, and slightly increases the disintegration time of Brufen, Congestal, and Panadol and the full-fat milk significantly increases the disintegration time of Reality Extra and Panadol while slightly increasing the disintegration time for Brufen and Congestal. It is concluded that commonly used beverages affect the disintegration time of the examined over-the-counter drugs. Patients should be advised to take these medications without beverages which may delay the disintegration and the onset of action of the drug. (shrink)

This article was motivated by the avalanche of finance spent annually on addressing the harm caused by corrosion on household wares and buildings, industrial machines and facilities, hospital equipment and many other establishment of man in the universe. Corrosion is a universal phenomenon referred to as the deterioration of metallic material. Metal alloys like stainless steel and aluminium are extensively used in household utensils for their durability, affordability and corrosion resistance. However, these materials can leach heavy metals such as (...) chromium, nickel, iron, and aluminium into food, posing serious health challenges. Stainless steel, despite its corrosion resistance, releases harmful metals when exposed to acidic foods, while aluminium utensils corrode and release harmful elements under certain conditions too. Hence, this article was aimed at examining the historical background of corrosion, the causes of corrosion in household wares and utensils, its impact especially on human health and economy, and the potential remedies. The findings indicated that acidic foods and prolonged storage increase metal leaching. Health concerns included increased risks of anemia, dementia, and osteomalacia due to excessive metal accumulation in the body. Mitigation strategies included using anodized aluminium, minimizing storage time of acidic foods in metal containers, and increasing public awareness about the potential health risks. Proper maintenance and selection of utensils could significantly reduce the hazards associated with metal leaching. (shrink)

Sources of soil contamination can exist in various types of conditions including in the form of semifluids. In this study, 3 different types of tropical plants, Acacia (Acacia mangium Willd), Mucuna (Mucuna bracteata DC. ex Kurz) and Vetiver (Vetiveria zizanioides L. Nash), were tested under different levels of soil-leachate conditions. The relative growth rate, metal tolerance, and phytoassessment of cadmium (Cd) and lead (Pb) accumulation in the roots and shoots were determined using flame atomic absorption spectrometry. Tolerance index, translocation (...) factor, metal accumulation ratio, and percentage metal efficacy were applied to assess the metal translocation ability among all the 3 types of plants. Significantly higher (P < .05) accumulation of Cd and Pb was exhibited in the roots and shoots of all 3 plants growing under the soil-leachate conditions. However, negative growth performance and plant withering were observed in both Acacia and Mucuna with increased application of higher soil-leachate levels. Vetiver accumulated remarkably higher total concentration of Cd (116.16-141.51 mg/kg) and Pb (156.37-365.27 mg/kg) compared with both Acacia and Mucuna. The overall accumulation trend of Cd and Pb in the 3 plants growing under the soil-leachate conditions was in the order of Vetiver > Acacia > Mucuna. The findings of the study suggest that Vetiver has great potential as Cd and Pb phytoremediator in soil-leachate conditions. (shrink)

Disintegration is the most important step for drug bioavailability because after, the disintegration process, the ingredients of solid dosage forms dissolve and become bioavailable. Generally, the tablets and capsules should be taken with a glass of water otherwise the manufacturer gives instructions to use the proper beverage. Several drugs are taken with different forms of beverages to ensure easy swallowing of the tablet, masking the bad taste of the drug and overcoming the drug aftertaste, these beverages can influence the (...) disintegration of the solid dosage form. The most common cold beverages consumed by the Libyan population are juice, milk, and Coca-Cola. These beverages are consumed without awareness of the possible effect of these beverages on drugs, especially over-the-counter drugs such as analgesic, antipyretic, and anti-inflammatory drugs that are taken without a prescription. This study aimed to evaluate the influence of three beverages, namely: orange juice, milk, and Coca-Cola on the disintegration time of four over-the-counter-drugs: Panadol, Congestal, Brufen, and Reality Extra using disintegration test of drugs in 0.1 N HCL and in hybrid medium prepared by combination of 150 ml 0.1 N HCL and 550 ml of beverage to simulate in vivo condition. The findings show that the orange juice significantly increases the disintegration time of all the investigated drugs. Coca-Cola significantly increases the disintegration time of Reality Extra, and slightly increases the disintegration time of Brufen, Congestal, and Panadol and the full-fat milk significantly increases the disintegration time of Reality Extra and Panadol while slightly increasing the disintegration time for Brufen and Congestal. It is concluded that commonly used beverages affect the disintegration time of the examined over-the-counter drugs. Patients should be advised to take these medications without beverages which may delay the disintegration and the onset of action of the drug. (shrink)

Sources of soil contamination can exist in various types of conditions including in the form of semifluids. In this study, 3 different types of tropical plants, Acacia (Acacia mangium Willd), Mucuna (Mucuna bracteata DC. ex Kurz) and Vetiver (Vetiveria zizanioides L. Nash), were tested under different levels of soil-leachate conditions. The relative growth rate, metal tolerance, and phytoassessment of cadmium (Cd) and lead (Pb) accumulation in the roots and shoots were determined using flame atomic absorption spectrometry. Tolerance index, translocation (...) factor, metal accumulation ratio, and percentage metal efficacy were applied to assess the metal translocation ability among all the 3 types of plants. Significantly higher (P < .05) accumulation of Cd and Pb was exhibited in the roots and shoots of all 3 plants growing under the soil-leachate conditions. However, negative growth performance and plant withering were observed in both Acacia and Mucuna with increased application of higher soil-leachate levels. Vetiver accumulated remarkably higher total concentration of Cd (116.16-141.51 mg/kg) and Pb (156.37-365.27 mg/kg) compared with both Acacia and Mucuna. The overall accumulation trend of Cd and Pb in the 3 plants growing under the soil-leachate conditions was in the order of Vetiver > Acacia > Mucuna. The findings of the study suggest that Vetiver has great potential as Cd and Pb phytoremediator in soil-leachate conditions. (shrink)

This largely expository lecture deals with aspects of traditional solid geometry suitable for applications in logic courses. Polygons are plane or two-dimensional; the simplest are triangles. Polyhedra [or polyhedrons] are solid or three-dimensional; the simplest are tetrahedra [or triangular pyramids, made of four triangles]. -/- A regular polygon has equal sides and equal angles. A polyhedron having congruent faces and congruent [polyhedral] angles is not called regular, as some might expect; rather they are said to be subregular—a word (...) coined for this lecture. To repeat, a subregular polyhedron has congruent faces and congruent [polyhedral] angles. A subregular polyhedron whose faces are all regular polygons is regular—using standard terminology. -/- Geometers before Euclid showed that there are “essentially” only five regular polyhedra: every regular polyhedron is a tetrahedron (4 faces), a hexahedron or cube (6 faces), an octahedron (8 faces), a dodecahedron (12 faces), or an icosahedron (20 faces). -/- The first question is whether there are subregular polyhedra that are not regular. For example, are there tetrahedra having congruent angles and congruent triangular faces but whose faces are not equilateral triangles? -/- Another question is the classification of subregular polyhedra if they exist. For example, considering the fact that the regular tetrahedra all have equilateral triangles as faces, we ask which triangles other than equilaterals are faces of subregular tetrahedra. Similarly, considering the fact that the regular hexahedra all have squares as faces, we ask which quadrangles other than squares are faces of subregular hexahedra. -/- After introductory remarks that include historical and philosophical points, we concentrate on tetrahedra. A triangle that is congruent to each of the four faces of a tetrahedron is called a generator of the tetrahedron. The main result proved is that every acute triangle is a generator of a subregular tetrahedron. The proof includes an algorithm –implementable with scissors and paper –that constructs from any given acute triangle a subregular tetrahedron whose faces are congruent to the given triangle. -/- Algorithm: Given any acute triangle. Construct a similar triangle whose sides are double the sides of the given triangle. Draw the three lines connecting the three midpoints of the sides (making four triangles congruent to the given triangle—a central triangle surrounded by three peripheral triangles). Make three “hinges” along the lines connecting the midpoints. “Fold” the peripheral triangles together (into a tetrahedron). [LIGHTLY EDITED VERSION OF PRINTED ABSTRACT] Acknowledgements: William Lawvere, Colin McLarty, Irvin Miller, Frango Nabrasa, Lawrence Spector, Roberto Torretti, and Richard Vesley. -/- . (shrink)

In this first edition of Introduction to materials and production technologies, the reader will find a practical guide to agile a conceptual approach to materials and processing technologies. The text is organized into seven main chapters: ceramics, composites, wood and derivatives, metal alloys, paints, plastics and glass. Through alphabetic tables, various commercial types are listed. Each chapter culminates with picture and analytical development of various technologies applicable in each case. Moreover, the text is supplemented with photos, explanatory images, spreadsheets (...) and commercial grading prepackaged measures. This work is based on the Scientific Report Final Adopted (Resolution CIC No. 685/02) on the topic "Relationship between new materials and durability of goods or products", held at the Department of Industrial Design at the National University of La Plata, under the Scholarship Program of the Committee on Scientific Research of the Province of Buenos Aires, granted by Decree No. 4468/98 and Resolution CIC No. 1919/99. This publication is intended for students, technical and professional disciplines proyectuales. It is a useful tool for those who wish to have a clear and comprehensive picture of the different materials and production processes query. -/- RESUMEN. En esta primera edición de Introducción a los materiales y tecnologías de producción, el lector encontrará una guía práctica ágil para una aproximación conceptual a los materiales y sus tecnologías de transformación. El texto está organizado en siete capítulos principales: cerámicos, compuestos, maderas y derivados, aleaciones metálicas, pinturas, plásticos y vidrios. A través de cuadros alfabéticos, se enumeran los diversos tipos comerciales. Cada capítulo culmina con el cuadro y desarrollo analítico de las distintas tecnologías aplicables en cada caso. Además, el texto se complementa con fotos, imágenes explicativas, planillas de clasificación y medidas comerciales de preelaborados. Este trabajo está basado en el Informe Científico Final Aprobado (Resolución CIC N° 685/02) sobre el tema: “Relación entre nuevos materiales y la durabilidad en bienes o productos”, realizado en el Departamento de Diseño Industrial de la Universidad Nacional de La Plata, en el marco del Programa de Becas de la Comisión de Investigaciones Científicas de la Provincia de Buenos Aires, otorgadas por Decreto Nº 4468/98 y Resolución CIC Nº 1919/99. Esta publicación está dirigida a estudiantes, técnicos y profesionales de disciplinas proyectuales. Es una herramienta de consulta útil para todos aquellos que deseen tener una idea clara y comprensiva de los distintos materiales y los procesos de producción. (shrink)

A solid foundation of modal logic requires a clear conception of the notion of modality. Modern modal logic treats modality as a propositional operator. I shall present an alternative according to which modality applies primarily to illocutionary force, that is, to the force, or mood, of a speech act. By a first step of internalization, modality applied at this level is pushed to the level of speech-act content. By a second step of internalization, we reach a propositional operator validating (...) the modal logic S4. After a brief discussion of problematic modality and possibility, the article concludes with an extension of the account that identifies modality with illocutionary force. Throughout, close attention is paid to the intended interpretation of the formalism. All of the rules stipulated will be justified on the basis of this interpretation. (shrink)

The interest of this submission is to decipher philosophical meaning from the cultural practice of Afia Olu of the Awka-Etiti people. This interrogation which extracts philosophical significance is principally geared towards apprehending why such a practice still maintains in the tradition of the Awka-Etiti as well as what residue philosophy can consult with respect to current thinking. The insights of reflection revolve around the factual significance maintained in relation to the Awka-Etiti people. Hence, this submission attempts to make out philosophical (...) meaning embedded in the practice of Afia Olu. (shrink)

The literature contains two concepts of corruption which are often confused with one another: corruption as twisted character (pollution), and corruption as disloyalty. It also contains two sites for corruption: the corruption of individuals, and the corruption of entire institutions such as a state or a legislature.This paper first draws a clear distinction between the pollution and disloyalty concepts of corruption in the individual context, and then defends a conception of disloyalty corruption according to which the distinguishing feature is an (...) agent who uses powers delegated to her from her principal as her own. Then, the paper shifts gears to the institutional context, arguing that the best account of institutional corruption in the extant literature is of the pollution kind. It then fills the remaining logical space by laying out a conception of institutional corruption as disloyalty and explaining its moral significance for the political legitimacy of a democracy. (shrink)

I shall argue that where a coercive public health policy is backed by a clear medical consensus, appropriately reconsidered in the light of claims of doubters, there is sometimes a moral obligation on the part of the public to defer to the experts. The argument will be geared to the continuing controversy in the UK over the safety of the measles/mumps/rubella (MMR) vaccine. vaccine.

Shashi Tharoor criticizes R.K. Narayan in the following way: “Narayan’s prose was like a bullock-cart: a vehicle that can move only in one gear, is unable to turn, accelerate or reverse, and remains yoked to traditional creatures who have long since been overtaken.” I think there is a quick defence, which is that it is very unlikely that one can write the different kinds of works he did without being able to significantly change pace; but there is an objection (...) from Joseph Conrad criticism. (shrink)

Smith’s Descartes Dictionary is geared specifically for undergraduate students and contains an Introduction, a Terms and Names section and a Bibliography. It is a good resource for students coming to Descartes’ writings for the first time and has the potential of being an even better pedagogical and study aid once its wrinkles are smoothened out, maybe in a second edition.

The work is an attempt to transfer a structure from Euclidean plane (pure geometrical) under the physical observation limit (resolving power) to a physical space (observable space). The transformation from the mathematical space to physical space passes through the observation condition. The mathematical modelling is adopted. The project is based on two stapes: (1) Looking for a simple mathematical model satisfies the definition of Euclidian plane; (2)That model is examined against three observation resolution conditions (resolved, unresolved and partially resolved). The (...) simplest mechanical model satisfies the definition of Euclidian plane is a planetary gear. The interesting examination of the mechanical model is that is under partial resolution. That examination shows analogous equation for Euler’s formula. The derived complex formula contains the resolved (observable) quantities of the mechanical system and satisfies the linear wave equation. The interpretation of this complex formula is: it is a function related to the position vector of a point in the small wheel of the partially resolved planetary gear system. The function is in terms of the observable quantities only. The work shows the possibility of transformation from real to complex space. The work is purely classical but the result of the partial resolution shows a function similar to the Quantum mechanics wave function. (shrink)

We introduce the working concept of “affective arrangement.” This concept is the centerpiece of a perspective on situated affectivity that emphasizes relationality, dynamics, and performativity. Our proposal relates to work in cultural studies and continental philosophy in the Spinoza–Deleuze lineage, yet it is equally geared to the terms of recent work in the philosophy of emotion. Our aim is to devise a framework that can help flesh out how affectivity unfolds dynamically in a relational setting by which it is at (...) the same time modulated in recurring ways. With this orientation, this article contributes to the interdisciplinary study of situated affectivity and to the theoretical and conceptual unification of distinct strands of research from several disciplines. (shrink)