This article was motivated by the avalanche of finance spent annually on addressing the harm caused by corrosion on household wares and buildings, industrial machines and facilities, hospital equipment and many other establishment of man in the universe. Corrosion is a universal phenomenon referred to as the deterioration of metallic material. Metal alloys like stainless steel and aluminium are extensively used in household utensils for their durability, affordability and corrosion resistance. However, these materials can leach heavy metals such (...) as chromium, nickel, iron, and aluminium into food, posing serious health challenges. Stainless steel, despite its corrosion resistance, releases harmful metals when exposed to acidic foods, while aluminium utensils corrode and release harmful elements under certain conditions too. Hence, this article was aimed at examining the historical background of corrosion, the causes of corrosion in household wares and utensils, its impact especially on human health and economy, and the potential remedies. The findings indicated that acidic foods and prolonged storage increase metal leaching. Health concerns included increased risks of anemia, dementia, and osteomalacia due to excessive metal accumulation in the body. Mitigation strategies included using anodized aluminium, minimizing storage time of acidic foods in metal containers, and increasing public awareness about the potential health risks. Proper maintenance and selection of utensils could significantly reduce the hazards associated with metal leaching. (shrink)

In this first edition of Introduction to materials and production technologies, the reader will find a practical guide to agile a conceptual approach to materials and processing technologies. The text is organized into seven main chapters: ceramics, composites, wood and derivatives, metal alloys, paints, plastics and glass. Through alphabetic tables, various commercial types are listed. Each chapter culminates with picture and analytical development of various technologies applicable in each case. Moreover, the text is supplemented with photos, explanatory images, (...) spreadsheets and commercial grading prepackaged measures. This work is based on the Scientific Report Final Adopted (Resolution CIC No. 685/02) on the topic "Relationship between new materials and durability of goods or products", held at the Department of Industrial Design at the National University of La Plata, under the Scholarship Program of the Committee on Scientific Research of the Province of Buenos Aires, granted by Decree No. 4468/98 and Resolution CIC No. 1919/99. This publication is intended for students, technical and professional disciplines proyectuales. It is a useful tool for those who wish to have a clear and comprehensive picture of the different materials and production processes query. -/- RESUMEN. En esta primera edición de Introducción a los materiales y tecnologías de producción, el lector encontrará una guía práctica ágil para una aproximación conceptual a los materiales y sus tecnologías de transformación. El texto está organizado en siete capítulos principales: cerámicos, compuestos, maderas y derivados, aleaciones metálicas, pinturas, plásticos y vidrios. A través de cuadros alfabéticos, se enumeran los diversos tipos comerciales. Cada capítulo culmina con el cuadro y desarrollo analítico de las distintas tecnologías aplicables en cada caso. Además, el texto se complementa con fotos, imágenes explicativas, planillas de clasificación y medidas comerciales de preelaborados. Este trabajo está basado en el Informe Científico Final Aprobado (Resolución CIC N° 685/02) sobre el tema: “Relación entre nuevos materiales y la durabilidad en bienes o productos”, realizado en el Departamento de Diseño Industrial de la Universidad Nacional de La Plata, en el marco del Programa de Becas de la Comisión de Investigaciones Científicas de la Provincia de Buenos Aires, otorgadas por Decreto Nº 4468/98 y Resolución CIC Nº 1919/99. Esta publicación está dirigida a estudiantes, técnicos y profesionales de disciplinas proyectuales. Es una herramienta de consulta útil para todos aquellos que deseen tener una idea clara y comprensiva de los distintos materiales y los procesos de producción. (shrink)

Man, in the Heraclitean principle of change, is an embodiment of continuity and discontinuity. To what end man’s being transcends to, is an interrogative of important discourse in this paper. Does Man flux from life to death; in nothingness, and from death, in nothingness, to life in somethingness? What does it mean to be human, to die and to experience change and human transcendence? The frequent nature of death, the death of loved ones, colleagues and friends elicit lamentations and sorrows, (...) but more importantly, it expresses human incapacity, fear of the unknown, lack of knowledge of death, and of what it means to die. Such attitude or confusion, may have informed the interrogative of Job (14:14): If man dies shall he live again? It also agitates the triad; if a man lives to die, does he die to live? If God is life, is God death also? If life is a means to an end, is death the end? (Adadevo, 2008; 38). These interrogatives exemplify the character and paradox of human existence; the more the knowledge of man about man, the more Man understands that he knows little about his being. It is argued here that, as a being that encapsulate change, discontinuity and continuity, man’s dissolution in death is not an external and public fact that creates a sense of loss and sadness to humanity, but an internal possibility of his being. It is the fulfillment of the Man project of self-liberation, self-transcendence, and a process of surpassing Man’s existential condition. We shall argue further that, in death, man ceases to be the impersonal social being among beings and has freed himself from the servitude of the anonymous “they” and thereby opened himself to his own most potentiality for being. In birth, there is the change of non-being to being, of nothingness to somethingness (somaticity), then to pure being after death; to a spiritual reality. A conclusion is argued that, in death, Man further becomes the most vitalizing fact of life and the cardinal indicator of authentic selfhood. (shrink)

Human actions and decisions are most of the times not only grounded on emotional reactions, they are irrationally debasing. While such emotions and heuristics were perhaps suitable for dealing with life in the Stone Age, they are woefully inadequate in the Silicon Age. The substitution of traditional news agencies and communication platforms in Nigeria with social media networks has not only increased human capacities, it has aided the common good and further eased communication and increased the human knowledge base. For (...) instance, the Silicon Valley in the state of California in the United State of America has proved the extent to which human ingenuity can be exerted in beneficial ways. Here in, the top of the multibillion-dollar communication companies like Apple, eBay, Cisco, Lockheed, Hewlett Packard (HP), Google, Netflix, Facebook, Oracle, Tesla, etc. whose yearly budgets far exceed the entire yearly budget of Nigeria, has proved that, ICT remains the building blocks of contemporary communities. The state of California for instance prides herself as the 6th largest economy of the world after France and Brazil. This romantic picture of ICT is but only one chapter of the ICT divide. In today’s world, the scale and speed of the highly partisan news and falsehoods that circulate in the human environment is deafening. In politics and governance for instance, the populist have exploited the ICT effectively and without restraints, to access power and authority. Today, we are in the era of post-truth, an era in which objective facts are less influential in shaping public opinion than appeals to emotion and personal belief. An era that harbours corruption of intellectual integrity and damage to the whole fabric of democracy. The battle to protect information integrity and expose fake news becomes sine qua non. We shall in this paper explore the dark side of the age of information, a side that has been exploited by the media mavens, political hacks, and ideological propagandists who promote lies, illusion, confusion, and other forms of demented or manipulated imagination. In doing this, we shall proceed as follows: i. Historicize the concept of ‘fake news’ here referred to as post-truth. ii. Interrogate the concept of ‘information’ and its goal in human affairs iii. Evaluate the nexus between ‘truth’ values in ‘information’, ‘Misinformation’ and ‘dis-information’ iv. Situate the role of Philosophy in the era of post-truth. (shrink)

The growth response, metal tolerance and phytoaccumulation properties of water spinach (Ipomoea aquatica) and okra (Abelmoschus esculentus) were assessed under different contaminated spiked metals: control, 50 mg Pb/kg soil, 50 mg Zn/kg soil and 50 mg Cu/kg soil. The availability of Pb, Zn and Cu metals in both soil and plants were detected using flame atomic absorption spectrometry. The concentration and accumulation of heavy metals from soil to roots and shoots (edible parts) were evaluated in terms of translocation factor, (...) accumulation factor and tolerance index. Okra recorded the highest accumulation of Pb (80.20 mg/kg) in its root followed by Zn in roots (35.70 mg/kg) and shoots (34.80 mg/kg) of water spinach, respectively. Different accumulation trends were observed with, Pb > Zn > Cu in okra and Zn > Pb > Cu in water spinach. Significant differences (p < 0.01) of Pb, Zn and Cu accumulation were found in both water spinach and okra cultivated among tested treatments. However, only the accumulation of Pb metal in the shoots of water spinach and okra exceeded the maximum permissible levels of the national Malaysian Food Act 1983 and Food Regulations 1985 ([2006]) as well as the international Codex Alimentarius Commission limits. This study has shown that both water spinach and okra have good potential as Pb and Zn phytoremediators. (shrink)

In this paper, a metal cutting machine position control have been designed and simulated using Matlab/Simulink Toolbox successfully. The open loop response of the system analysis shows that the system needs performance improvement. Static output feedback and full state feedback H 2 controllers have been used to increase the performance of the system. Comparison of the metal cutting machine position using static output feedback and full state feedback H 2 controllers have been done to track a set point (...) position using step and sine wave input signals and a promising results have been analyzed. (shrink)

This study used a flame atomic absorption spectrometer (FAAS) and atomic fluorescence spec-trophotometer (AFS) to detect the concentrations of chromium (Cr), cadmium (Cd), lead (Pb), hy-drargyrum (Hg) and arsenic (As) in soils and three genotypes of vegetables in greenhouse, as well as analyzed the physical and chemical properties of soils, including soil pH, soil organic matter (OM), basic nutrients, electrical conductivity (EC) and cation exchange capacity (CEC) in Guan- zhong areas, Shaanxi province, China. The results showed that comparing to subsoil, (...) the sampled topsoil is enriched in Cr, Cd, Pb, As and Hg. Cd (0.83 - 3.17 mg·kg-1) and Hg (0.40 - 1.44 mg·kg-1) are exceeding the limited value stated in “the 2006 Greenhouse Vegetable Producing Environmental Quality Evaluation Standards” of 0.40 mg·kg-1 and 0.35 mg·kg-1 respectively. However, Nanzhuang greenhouse soil is within the limits. The heavy metal pollution index (HPI) of soil in Sanyuan (8.10) is the highest and in Dongzhang (4.23) is the lowest. The contents of Pb (0.201 - 0.376 mg·kg-1) were exceeding the limited value (0.20 mg·kg-1) in vegetables species, and Cd (0.0363 - 0.0572 mg·kg-1) in some place were also exceeding the limited value (0.05 mg·kg-1). Greenhouse soils were becoming acidified year after year; the ratios of N, P and K in soil were seriously imbalanced. According to the impacting factors, OM, pH, available P, EC and CEC have obviously effected the accumulation of Cr and Hg. However, there was not enough evidence for the effects of available nitrogen and available potassium. (shrink)

It has recently been argued that metal’s ‘heaviness’ is conceptually inarticulable. I argue, on the contrary, that ‘heaviness’ is a matter of inaccessibility—the ‘something more’ that makes metal ‘heavy’ is actually something less: less auditory processing fluency. Like profound literature, metal resists, but also invites and rewards, interpretation. I argue that understanding ‘heaviness’ in terms of auditory processing fluency allows us to make sense of a number of otherwise puzzling features of the music, and to articulate a (...) unifying gestalt for the genre. (shrink)

Here, I explore a modernist aesthetics of death metal. First, I briefly describe a few themes that characterize some modern art, without any claim that they are necessary, sufficient, or exhaustive. The goal is to obtain a set of themes that might be set against similar themes characteristic of death metal. This is the task in the second half of the paper. In particular, I argue that (some) modernist art and death metal share themes centered on transgressively (...) breaking with the past, pursue their conception of the truth, eliminate elements in their art form to purity them, and attack the art/non-art or music/non-music distinction. I contend that centering on death metal vocals reflects these themes. Death metal growls, like some modernist art, transgresses on past vocal traditions, tells us important truths, eliminates traditional concepts/techniques of signing, and undermines the singing/noise distinction. (shrink)

This paper addresses the issues related to designing and estimating the strength of solid-alloy elements in the deforming broaches of significant diameter (exceeding 150 mm) for the developed process of discrete broaching. The tool limit condition was assessed based on two strength criteria: the specific potential energy of shape change and the maximum tangent stresses. Numerical modeling using the finite element method has made it possible to derive the distribution of equivalent stresses in the tool elements and the contact stresses (...) at the surface of the contact between a solid-alloy insert and the body, which enabled the analysis of tool strength under loading. The simulation was performed under a single normal load, which ensured the versatility of the calculation for any contact pressure values. We have derived formulae to calculate the acceptable contact pressure depending on unit load. The effect of the insert protrusion height over the body on the strength of tool elements has been established. We have derived engineering dependences that determine the required magnitude of insert protrusion over the body depending on the ultimate load. An example of calculating the strength of a prefabricated deforming element in the machining of a sleeve made from gray modified cast iron of hardness HB230 has been considered. Our calculations have shown that the deforming element designed for the new technological process corresponds to the conditions of strength, provided the ratio h1/h=0.15 is maintained (where h1 is the insert height above the body, h is the insert height). The results obtained could be used in engineering calculations when designing the prefabricated tool for discrete deformation, as well as to assess the strength of prefabricated tools, such as cutters, core drills, reamers, when refining external loads. (shrink)

Abstract The rapid growth of Indonesian Heavy Metal music, especially the Death Metal subgenre, since around the turn of the millennium, has been quite remarkable. Indonesia is now numerically the largest scene in the world. Man, the vocalist of Jasad, told the author that the provincial West Javanese city of Bandung had 128 active Death Metal bands as at February 2011. This chapter will discuss the cancellation of an April 2012 music festival held in the Bandung hinterland (...) by police halfway through the festival, and explain how and why it took place. Police became nervous and worried about Heavy Metal shows following the deaths of eleven concertgoers, due to a crowd crush, at a Beside album launch in Bandung in 2008. The chapter analyses the “maternal rage” of a band member’s mother (also a policewoman at the scene) from the perspective of grounded gendered cosmopolitanism. Lastly, a short case study of Sickles, a young band from the religiously-conservative Madura Island, shows the problems that young bands experience plus the type of global underground support which they can attract. (shrink)

Tropical grasses are fast growing and often used for phytoremediation. Three different types of tropical grasses: Vetiver (V. zizanoides), Imperata (I. cylindrical) and Pennisetum (P. purpureum) tested in different growth media of spiked heavy metal contents under the glasshouse environment of RimbaIlmu for 60-day. The growth performance, metals tolerance and phyto-assessment of cadmium (Cd), lead (Pb), zinc (Zn) and copper (Cu) in shoots and roots were assessed using flame atomic absorption spectrometry (FAAS).Tolerance index (TI), translocation factor (TF), biological accumulation (...) coefficient (BAC), biological concentration factor (BCF), and uptake efficacy was applied to evaluate the metal translocation ability among all three grasses. All three grasses showed significantly higher (p<0.05) accumulation of the total heavy metals in the spiked metal treatment compared with other tested treatments. Vetiver accumulated remarkably higher total concentration of Cd (93.08 ± 3.81 mg/kg) and Zn (1284.00 ± 234.83 mg/kg) than both Imperata and Pennisetum. The overall trend of heavy metals accumulation for all three grasses followed the order of Zn>Pb>Cd>Cu. The results of study suggested that both Imperata and Pennisetum are commendable and potential phytoextractors for Zn as well as phytostabilizers for Cd, Pb and Cu, respectively. (shrink)

Morality has always been a pressing issue in video game scholarship, but became more contentious after “realistic” violence in games became possible. However, few studies concern themselves with how players experience moral dilemmas in games, choosing instead to focus on the way games affect postplay behavior. In my thesis I discuss the moral choices players encounter in the Metal Gear series of games; then, I analyze and compare the responses of players with and without martial career experiences. My argument (...) is that the moral choices players encounter during gameplay affect them differently, particularly if they have life experiences related to medical trauma, law enforcement, fire fighting, or military career fields, and that the behavior of those players will be observably different from players without the same experiences. In chapter one I present my personal history with Metal Gear, before moving on to the literature review in chapter two, which focuses on scholarship about the Metal Gear series of games and video game research as a whole, particularly studies concerned with how violent content affects players. In chapters three and four, I analyze Metal Gear Solid 3 (2004) and Metal Gear Solid V (2014/2015) in order to gain insight into the moral dilemmas posed by each game. In chapter five I report the results of a survey about player responses towards the game dilemmas given by martial and non-martial groups to identify observable patterns of behavior in how they act and react towards each scenario. -/- This is a preprint version of the official paper until an update is produced. The current official version is available at the West Chester Digital Commons in the external link section below. (shrink)

Wittgenstein’s comment that what can be shown cannot be said has a special resonance with visual representations of power in both Heavy Metal and Fundamentalist Christian communities. Performances at metal shows, and performances of ‘religious theatre’, share an emphasis on violence and destruction. For example, groups like GWAR and Cannibal Corpse feature violent scenes in stage shows and album covers, scenes that depict gory results of unrestrained sexuality that are strikingly like Halloween ‘Hell House’ show presented by neo-Conservative, (...) Fundamentalist Christian churches in the southeastern United States’ ‘Bible Belt’. One group may claim to celebrate violence, the other sees violence as a tool to both encourage ‘moral’ behaviour, and to show that the Christian church is able to ‘speak the language’ of young people who are fans of metal, gore, and horror. Explicit violence, in each case, signifies power relationships that are in transformation. Historically, medieval morality plays and morality cycles had been used as a pedagogical tool. In the modern-day context of fundamentalist religious education, these Hell House performances seek to exclude outsiders and solidify teen membership in the Christian community. Hell House performances are marketed to the young church members, and are seen as a way to reinvigorate conservative Fundamentalist Christianity. Women and girls routinely take part in, and often organize Hell House events. In the context of heavy metal, violent performances do not seek to exclude, but provide an outlet for a variety of socially unacceptable or unpopular feelings. In each context there is an apparent, if not actual, empowering of women who are willing to play particular kinds of roles. The use of violence and gore has a value beyond merely shocking the audience, it is arguably a way that some women find their voice, both for fundamentalist Christians and fundamentalist gore metal fans. (shrink)

E-waste, also known as waste from electrical and electronic equipment, is a solid waste that accumulates quickly due to high demand driven by the market for replacing newer electrical and electronic products. The global e-waste generation is estimated to be between 53.6 million tons, and it is increasing by 3–5% per year. Metals make-up approximately 30% of e-waste, which contains precious elements Au, Ag, Cu, Pt, and other high-value elements, valued at USD 57 billion, which is driving the e-waste recycling (...) industry. It is noteworthy that the recycling of precious elements from e-waste has emerged as a profitable enterprise in several parts of developing nations. E-waste contains 50–100 times higher levels of precious metals compared to natural ores, making it suitable for mining. E-waste recycling in developing nations, mostly occurs through the informal sector comprising manual collection, crushing, segregation and selling of precious elements, such as Au, Ag, Cu, Pb, Pt, and other rare elements (Nd, In, and Ga). The organized sector, on the other hand, mostly employs mechano-chemical methods, such as pyrometallurgy, hydrometallurgy, and bio-hydrometallurgy, which have serious environmental consequences. Both the informal and formal sectors of e-waste processing lead to the leaching of toxic elements into groundwater and soils. Owing to the lesser efficiency of greener technologies, such as phytoremediation and bioremediation, their use in precious metal extraction is very limited. However, this review explores several hyper-accumulating and tolerant plants viz. Brassica juncea and Berkheya coddii, which holds great potential in phytomining of precious metal from e-waste. Thus, the state of the art in precious metal extraction from e-waste as well as the advantages and disadvantages of different metal extraction technologies has been reviewed. (shrink)

Over the years, ethylene-diamine-tetra-acetate (EDTA) has been widely used for many purposes. However, there are inadequate phytoassessment studies conducted using EDTA in Vetiver grass. Hence, this study evaluates the phytoassessment (growth performance, accumulation trends, and proficiency of metal uptake) of Vetiver grass, Vetiveria zizanioides (Linn.) Nash in both single and mixed heavy metal (Cd, Pb, Cu, and Zn)—disodium EDTA-enhanced contaminated soil. The plant growth, metal accumulation, and overall efficiency of metal uptake by different plant parts (lower (...) root, upper root, lower tiller, and upper tiller) were thoroughly examined. The relative growth performance, metal tolerance, and phytoassessment of heavy metal in roots and tillers of Vetiver grass were examined. Metals in plants were measured using the flame atomic absorption spectrometry (F-AAS) after acid digestion. The root-tiller (R/T) ratio, biological concentration factor (BCF), biological accumulation coefficient (BAC), tolerance index (TI), translocation factor (TF), and metal uptake efficacy were used to estimate the potential of metal accumulation and translocation in Vetiver grass. All accumulation of heavy metals were significantly higher (p < 0.05) in both lower and upper roots and tillers of Vetiver grass for Cd + Pb + Cu + Zn + EDTA treatments as compared with the control. The single Zn + EDTA treatment accumulated the highest overall total amount of Zn (8068 ± 407 mg/kg) while the highest accumulation for Cu (1977 ± 293 mg/kg) and Pb (1096 ± 75 mg/kg) were recorded in the mixed Cd + Pb + Cu + Zn + EDTA treatment, respectively. Generally, the overall heavy metal accumulation trends of Vetiver grass were in the order of Zn >>> Cu > Pb >> Cd for all treatments. Furthermore, both upper roots and tillers of Vetiver grass recorded high tendency of accumulation for appreciably greater amounts of all heavy metals, regardless of single and/or mixed metal treatments. Thus, Vetiver grass can be recommended as a potential phytoextractor for all types of heavy metals, whereby its tillers will act as the sink for heavy metal accumulation in the presence of EDTA for all treatments. (shrink)

Tropical grasses are fast growing and often used for phytoremediation. Three different types of tropical grasses: Vetiver (V. zizanoides), Imperata (I. cylindrical) and Pennisetum (P. purpureum) tested in different growth media of spiked heavy metal contents under the glasshouse environment of RimbaIlmu for 60-day. The growth performance, metals tolerance and phyto-assessment of cadmium (Cd), lead (Pb), zinc (Zn) and copper (Cu) in shoots and roots were assessed using flame atomic absorption spectrometry (FAAS).Tolerance index (TI), translocation factor (TF), biological accumulation (...) coefficient (BAC), biological concentration factor (BCF), and uptake efficacy was applied to evaluate the metal translocation ability among all three grasses. All three grasses showed significantly higher (pPb> Cd >Cu. The results of study suggested that both Imperata and Pennisetum are commendable and potential phytoextractors for Zn as well as phytostabilizers for Cd, Pb and Cu, respectively. (shrink)

Three different types of low cost soil amendments, namely, EDTA, elemental S and N-fertilizer, were investigated with Vetiver grass, Vetiveria zizanioides (Linn.) Nash growing under highly mixed Cd–Pb contamination conditions. A significant increase (p < 0.05) in Cd and Pb accumulation were recorded in the shoots of all EDTA and N-fertilizer assisted treatments. The accumulation of Cd in 25 mmol EDTA/kg soil and 300 mmol N/kg soil showed relatively higher translocation factor (1.72 and 2.15) and percentage metal efficacy (63.25 (...) % and 68.22 %), respectively, compared to other treatments. However, it was observed that the increased application of elemental S may inhibit the availability of Pb translocation from soil-to-root and root-to-shoot. The study suggests that viable application of 25 mmol EDTA/kg, 300 mmol N/kg and 20 mmol S/kg soil have the potential to be used for soil amendment with Vetiver grass growing under contaminated mixed Cd–Pb soil conditions. (shrink)

This paper explores how a set of observations on the weight of lead were interpreted and assessed between the 1540s and the 1630s across three different interconnecting disciplines: medicine, mineralogy and chemistry. The epistemic import of these discussions will be demonstrated by showing: 1) the changing role and articulation of experience and quantification in the investigation of metals; and 2) the notions associated with weight in different disciplinary frameworks. In medicine and mineralogy, weight was not considered as a specific subject (...) of inquiry in itself, but as a “sign” indicating other relevant properties of metals. In contrast, the chemistry tradition was increasingly concerned with the specific investigation of weight as a property of matter, as seen in the debates that took place in the “chemical revolution.” In addition, this study will reveal the versatility, polysemy, and parallel purposes of the recourse to experiential knowledge in different contexts, where the same “facts” operate within different disciplines. (shrink)

This paper adopts two modeling tools, namely, multiple linear regression (MLR) and artificial neural networks (ANNs), to predict the concentrations of heavy metals (zinc, boron, and manganese) in surface waters of the Oued Inaouen watershed flowing towards Inaouen, using a set of physical-chemical parameters. XLStat was employed to perform multiple linear and nonlinear regressions, and Statista 10 was chosen to construct neural networks for modeling and prediction. The effectiveness of the ANN- and MLR-based stochastic models was assessed by the determination (...) coefficient (R²), the sum squared error (SSE) and a review of fit graphs. The results demonstrate the value of ANNs for prediction modeling. Drawing on supervised learning and back propagation, the ANN-based prediction models adopt an architecture of [18-15-1] for zinc, [18-11-1] for manganese, and [18-8-1] for boron, and perform effectively with a single cached layer. It was found that the MLR-based prediction models are substantially less accurate than those based on the ANNs. In addition, the physical-chemical parameters being investigated are nonlinearly correlated with the levels of heavy metals in the surface waters of the Oued Inaouen watershed flowing towards Inaouen. (shrink)

The Ganga is one of the most sacred and worshipped river of India, is regarded as the cradle of Indian civilization. Uttar Pradesh the largest state of India is blessed with the most holy and important river in its region but due to increased urbanization and industrialization this river is under intimidation of high water pollution. The major objectives of the present study were to investigate heavy metal's concentration in water and sediments of the River Ganga. Water and sediments (...) collected from different locations were analyzed for Iron (Fe), Chromium (Cr), Lead (Pb),Nickel(Ni) and Zinc(Zn). The concentration of these heavy metals in the study area indicates that the river is highly polluted. The possible sources of these heavy metal pollutants are diverse, originated from natural or anthropogenic sources and point sources. The concentrations determined were more than the maximum admissible and desirable limit when compared with the National and International organizations like WHO, USEPA. Exposure to heavy metals has been linked to chronic and acute toxicity developing retardation, neurotoxicity, kidney damage, various cancers, liver damage, lung damage, and fragile bones and even death in instances of very high exposure. (shrink)

The main aim of this paper is to clarify the relation between epistemic feel- ings, mental action, and self-ascription. Acting mentally and/or thinking about one’s mental states are two possible outcomes of epistemic or metacognitive feelings. Our men- tal actions are often guided by our E-feelings, such as when we check what we just saw based on a feeling of visual uncertainty; but thought about our own perceptual states and capacities can also be triggered by the same E-feelings. The first (...) section of the pa- per presents Dokic’s argument for the insufficiency of the “ascent routine” to account for non-transparent cases of self-ascription, as well as his account of E-feelings. The second section then presents a two-level model of metacognition that builds on Dokic’s account and my own view of the issue. The two-level model links E-feelings to a min- dreading capacity in order to account for non-transparent self-ascriptions. Finally, the third section develops a deeper characterization of the relation among E-feelings, mental action, and self-ascription of mental states based on epistemic rules. In the context of self-knowledge, these remarks suggest the existence of means of forming self-ascriptions other than the ascent routine. (shrink)

This paper focuses on the question of filtration through the perspective of “too much information”. It concerns Western society within the context of new media and digital culture. The main aim of this paper is to apply a philosophical reading on the video game concept of Selection for Societal Sanity within the problematics of cultural filtration, control of behaviors and desire, and a problematization of trans-individuation that the selected narrative conveys. The idea of Selection for Societal Sanity, which derives from (...) the first postmodern video game Metal Gear Solid 2: Sons of Liberty (2001), is applied into a philosophical framework based on select concepts from Bernard Stiegler’s writing and incorporating them with current events such as post-truth or fake news in order to explore the role of techne and filtration within social organizations and individual psyches. Alternate forms of behavior, which contest cultural paradigms, are re-problematized as tension between calculability and incalculability, or market value versus social bonding. (shrink)

Various types of plant species have been extensively used for heavy metals phyto-remediation without taking into consideration its tolerance threshold. In this study, Vetiver grass, Vetiveria zizanioides (Linn.) Nash was evaluated under five different sets of contaminated spiked cadmium (5Cd, 10Cd, 50Cd, 100Cd and 150Cd mg/kg) and lead (50Pb, 100Pb, 200Pb, 400Pb and 800Pb mg/kg) concentration levels in soil. The growth performance, metal tolerance and phyto-assessment of Cd and Pb in the roots and tillers were assessed using flame atomic (...) absorption spectrometry (FAAS). Tolerance index (TI), translocation factor (TF), biological transfer factor (BTF), biological accumulation coefficient (BAC) and metal uptake efficacy were used to determine the Cd and Pb translocation capability in Vetiver grass. Significantly higher (p<0.05) accumulation of Cd and Pb was recorded in the roots of all spiked treatments. Furthermore, strong and significantly positive correlations were exhibited between the increased levels of spiked heavy metal concentrations with both Cd (r=0.975) and Pb (r=0.952) accumulations. The results of this study showed Vetiver grass as an effective phyto-stabilizer for both Cd and Pb. Nevertheless, the growth of Vetiver grass was restricted when the tolerance threshold of 100 mg/kg (dry weight basis) Cd was exceeded in the contaminated soil. (shrink)

Sources of soil contamination can exist in various types of conditions including in the form of semifluids. In this study, 3 different types of tropical plants, Acacia (Acacia mangium Willd), Mucuna (Mucuna bracteata DC. ex Kurz) and Vetiver (Vetiveria zizanioides L. Nash), were tested under different levels of soil-leachate conditions. The relative growth rate, metal tolerance, and phytoassessment of cadmium (Cd) and lead (Pb) accumulation in the roots and shoots were determined using flame atomic absorption spectrometry. Tolerance index, translocation (...) factor, metal accumulation ratio, and percentage metal efficacy were applied to assess the metal translocation ability among all the 3 types of plants. Significantly higher (P < .05) accumulation of Cd and Pb was exhibited in the roots and shoots of all 3 plants growing under the soil-leachate conditions. However, negative growth performance and plant withering were observed in both Acacia and Mucuna with increased application of higher soil-leachate levels. Vetiver accumulated remarkably higher total concentration of Cd (116.16-141.51 mg/kg) and Pb (156.37-365.27 mg/kg) compared with both Acacia and Mucuna. The overall accumulation trend of Cd and Pb in the 3 plants growing under the soil-leachate conditions was in the order of Vetiver > Acacia > Mucuna. The findings of the study suggest that Vetiver has great potential as Cd and Pb phytoremediator in soil-leachate conditions. (shrink)

Sources of soil contamination can exist in various types of conditions including in the form of semifluids. In this study, 3 different types of tropical plants, Acacia (Acacia mangium Willd), Mucuna (Mucuna bracteata DC. ex Kurz) and Vetiver (Vetiveria zizanioides L. Nash), were tested under different levels of soil-leachate conditions. The relative growth rate, metal tolerance, and phytoassessment of cadmium (Cd) and lead (Pb) accumulation in the roots and shoots were determined using flame atomic absorption spectrometry. Tolerance index, translocation (...) factor, metal accumulation ratio, and percentage metal efficacy were applied to assess the metal translocation ability among all the 3 types of plants. Significantly higher (P < .05) accumulation of Cd and Pb was exhibited in the roots and shoots of all 3 plants growing under the soil-leachate conditions. However, negative growth performance and plant withering were observed in both Acacia and Mucuna with increased application of higher soil-leachate levels. Vetiver accumulated remarkably higher total concentration of Cd (116.16-141.51 mg/kg) and Pb (156.37-365.27 mg/kg) compared with both Acacia and Mucuna. The overall accumulation trend of Cd and Pb in the 3 plants growing under the soil-leachate conditions was in the order of Vetiver > Acacia > Mucuna. The findings of the study suggest that Vetiver has great potential as Cd and Pb phytoremediator in soil-leachate conditions. (shrink)

I have both a smaller and a larger aim. The smaller aim is polemical. Kit Fine believes that a material thing—a Romanesque statue, for example, or an open door—can be distinguished from its constituent matter—a piece of alloy, say, or a hunk of plastic—without recourse to modal or temporal considerations. The statue is Romanesque; the piece of alloy is not Romanesque. The door is open; the hunk of plastic is not open. I argue that these considerations, when combined with a (...) proper understanding of how the use of ‘not’ is functioning, entail that the statue is the piece of alloy, and that the door is the hunk of plastic. Far from challenging the doctrine that a material thing is its matter, Fine’s observations confirm the view. My larger aim is methodological. I will show that natural language semantics can guide inquiry in certain areas of metaphysics by helping us to advance lingering debates. (shrink)

The Burge-Putnam thought experiments have generated the thesis that beliefs are not fixed by the constitution of the body. However, many philosophers have thought that if this is true then there must be another content-like property. Even if the contents of our attitudes such as the one in ‘believes that aluminum is a light metal’, do not supervene on our physical makeups, nevertheless people who are physical duplicates must be the same when it comes to evaluating their rationality and (...) explaining their actions. I argue that the considerations motivating this view are best handled with just the ordinary ‘that’-clause contents. (shrink)

1. Animal Cruelty Industrial farming is appallingly abusive to animals. Pigs. In America, nine-tenths of pregnant sows live in “gestation crates. ” These pens are so small that the animals can barely move. When the sows are first crated, they may flail around, in an attempt to get out. But soon they give up. Crated pigs often show signs of depression: they engage meaningless, repetitive behavior, like chewing the air or biting the bars of the stall. The sows live like (...) this for four months. Gestation crates will be phased out in Europe by the end of 2012, but they will still be used in America.1 In nature, pigs nurse their young for about thirteen weeks. But in industrial farms, piglets are taken from their mothers after about ten days. Because the piglets are weaned prematurely, they develop a lifelong craving to suck and chew. But the farmers don’t want them sucking and chewing on other pigs’ tails. So the growers routinely snip off the tails of all their pigs. They do this with a pair of pliers and no anesthetic. However, the whole tail is not removed; a tender stump remains. The point is to render the area sensitive, so the pigs being chewed on will fight back. Which they do.2 Over 113 million pigs are slaughtered each year in America.3 Typically, these pigs are castrated, their needle teeth are clipped, and one of their ears is notched for identification —all without pain relief.4 In nature, pigs spend up to three quarters of their waking hours foraging and exploring their environment.5 But in the factory farms, “tens of thousands of hogs spend their entire lives ignorant of earth or straw or sunshine, crowded together beneath a metal roof standing on metal slats suspended over a septic tank. ”6 Bored, and in constant pain, the pigs must perpetually inhale the fumes of their own waste. These pigs often get sick, and their ill health is exacerbated by the overcrowding. In 2000, the U.S. Department of Agriculture compared hog farms containing over 10,000 pigs—which is the norm—with farms containing under 2,000 pigs. (shrink)

У статті розглянуто актуальне явище сучасної культури – взаємопроникнення кількох різних культур (в історико-типологічному сенсі) в Україні. Увагу акцентовано на вірменській меншині як культуротворчій діаспорі України. Досліджено роль вірменських музикантів у поліетнічній культурі України та їх самоідентифікацію у творчості. Увагу сконцентровано на проявах задіяння зразків класичного різножанрового мистецтва в сучасних творах та взаємодії українського й вірменського мистецтва в цьому ракурсі. Проаналізовано творчість вірменських музикантів, які спочатку як імпровізацію, а згодом і в більшості своїх проектів використовують прийом міксування етнічних елементів українського (...) та вірменського мелосу. Розглянуто зручні для імпровізації жанри джазової та важкої музики (jazz-funk, groove, death-metal, pop-jazz та ін.). -/- . (shrink)

Popper's well-known demarcation criterion has often been understood to distinguish statements of empirical science according to their logical form. Implicit in this interpretation of Popper's philosophy is the belief that when the universe of discourse of the empirical scientist is infinite, empirical universal sentences are falsifiable but not verifiable, whereas the converse holds for existential sentences. A remarkable elaboration of this belief is to be found in Watkins's early work on the statements he calls “all-and-some,” such as: “For every (...) class='Hi'>metal there is a melting point.” All-and-some statements are both universally and existentially quantified in that order. Watkins argued that AS should be regarded as both nonfalsifiable and nonverifiable, for they partake in the logical fate of both universal and existential statements. This claim is subject to the proviso that the bound variables are “uncircumscribed” ; i.e., that the universe of discourse is infinite. (shrink)

Purpose. To determine the potential of deforming broaching for the improvement of efficiency of cutter chisels in the mining industry. Methodology. The study of the application of the technological process of deforming broaching was carried out based on the experimental research into conditions of assembly of press couplings corresponding to cutting rock-destroying tools, the working surface of which is reinforced with solid-alloy inserts. Findings. Based on the conducted research, a new process of assembling the crowns of cutter chisels with the (...) use of deforming broaching was developed. Originality. It was determined that the range of angles of inclination of generatrix of the working cone of the deforming element and the roll-treading lip of the insert, which are necessary for efficient machining and pressing in crowns of cutters, is 4–16°. It was proven that the “solid alloy-steel” press couplings for cutter chisels will have the maximum bearing capacity at total tension a/d0 ≤ 3 %. It was found that it is necessary to foresee the following distribution of tensions: to perform 2 % of deformation by preliminary deforming broaching, and 1 % ‒ by pressing in an insert Practical value. The use of deforming broaching makes it possible to increase the strength of fastening the inserts of cutter chisels by 2 times, to reduce specific consumption of the tool by 4.4 times, and to increase the average drilling rate by 4 times. (shrink)

Martin and Deutscher’s remarkable 1966 paper ‘Remembering’ still offers great riches to memory researchers across distinctive traditions, both in its methodological ambition (successfully marrying phenomenological and causal discourses) and in its content. In this short discussion, after briefly setting the paper in its context, we hone in on two live and under-explored issues which have gained attention recently under new labels – the extended mind hypothesis, and the constructive nature of memory. We suggest that Martin and Deutscher’s causal analysis of (...) memory is compatible with the idea that activities of remembering may be distributed across heterogeneous social and external resources, focussing in on their neglected example of creatures who ‘remember as we do’ as long as they carry round metal boxes which are given to them at birth. We then argue that the causal analysis is in some tension with the extent to which remembering is a constructive activity, because there may be no clear way to determine the appropriate ‘limits of accuracy’ within which a past event or experience must be represented. (shrink)

Water quality assessment is critical for environmental sustainability and public health. This research employs neural networks to predict water quality, utilizing a dataset of 21 diverse features, including metals, chemicals, and biological indicators. With 8000 samples, our neural network model, consisting of four layers, achieved an impressive 94.22% accuracy with an average error of 0.031. Feature importance analysis revealed arsenic, perchlorate, cadmium, and others as pivotal factors in water quality prediction. This study offers a valuable contribution to enhancing water quality (...) monitoring and decision-making for stakeholders and policymakers. (shrink)

Building upon Nancy Cartwright's discussion of models in How the Laws of Physics Lie, this paper addresses solid state research in transition metal oxides. Historical analysis reveals that in this domain models function both as the culmination of phenomenology and the commencement of theoretical explanation. Those solid state chemists who concentrate on the description of phenomena pertinent to specific elements or compounds assess models according to different standards than those who seek explanation grounded in approximate applications of the Schroedinger (...) equation. Accurate accounts of scientific debate in this field must include both perspectives. (shrink)

The market capitalization of an enterprise is one of the key indicators characterizing the degree of influence of financial and non-financial instruments on its volumes and dynamics. Establishing the relationship between such instruments and metrics of equity and cash flows best delineates the plane of their direct impact on stimulating market capitalization. This is aimed at ensuring the implementation of effective management measures in the context of optimizing the use of equity and cash flows. The aim of the study was (...) to establish how the influence of indicators of financial and non-financial instruments on equity and cash flows forms a relevant basis for making management decisions to increase enterprise market capitalization. During the research, the following methods were used: summarization and grouping, multiple linear regression, direct ranking method, establishment of cause-and-effect relationships, logical generalization, and analytical method. As a result of the study, the toolkit for increasing the market capitalization of the enterprise from the standpoint of its grouping in terms of financial and non-financial plane was clarified. It was found that among the 36 analyzed indicators of the impact on equity and cash flows of the studied machine-building enterprises in Ukraine during the period 2010-2021, the most significant are bank lending, investment and technical metals, research and development costs, foreign scientific and technical services received, production investments, work-in-progress, and accounts payable for products, goods, and services. The results were transformed into a model of ranked instruments for stimulating the market capitalization of machine-building enterprises, which demonstrates the degree and directions of the influence of indicators of financial and non-financial instruments on the dynamics of equity and cash flows, which ensures the formation of an information database for making decisions on the further use of such instruments. The structuring of the toolkit serves as the basis for forming a system of management decisions containing practical recommendations within each group of instruments aimed at optimizing market capitalization through increased equity and cash flows of the enterprise. The obtained results will be beneficial to financial analysts of enterprises in preparing databases for making financial and non-financial decisions. (shrink)

Abstract: The paper presented is a work started in summer 2014 for improving surfaces of turned holes. The work was confined to two materials; aluminum alloy and brass alloy. The internal machined surfaces were burnished by ball burnishing tools. Experimental work was carried out on a lathe machine to establish the effect of the internal ball burnishing parameters; namely, burnishing feed rate, speed, force and number of tool passes on the Surface roughness and surface hardness. The operation was carried out (...) at load pushing speed 24 m/min through the hole. Turned Al-Br specimens were divided into groups, the parameters were changed with each group. The optimum values of surface roughness and surface hardness were obtained where the surface roughness improved from 3.14 µm to 0.14 µm for Al µm and from 2.25 to 0.16 for brass and the surface hardness improved from116 HV to 184 HV for Al and from 182 to 244 HV for brass. (shrink)

La exterioridad de una cosa o de un estado de cosas configurados por el ser humano no implica para Hegel que esa cosa o ese estado de cosas deban ya por ello ser considerados como formas del espíritu objetivo, mientras que en contrapartida las formas del espíritu absoluto estarían entonces conformadas por contenidos ideales del pensamiento. La diferencia entre espíritu objetivo y espíritu absoluto no radica en la diferencia entre lo que el espíritu humano “hace” y lo que “conoce”. En (...) efecto, las obras de arte, es decir, configuraciones exteriores hechas por el ser humano utilizando, por ejemplo, piedras, metales, colores o sonidos, son para Hegel instancias del espíritu absoluto, mientras que, por su parte, realidades que en cuanto tales no son intuibles, como, por ejemplo, los contratos o la organización estatal, son instancias del espíritu objetivo. Que Hegel considere al arte como una forma del espíritu absoluto pone de manifiesto que, a sus ojos, las cosas que intuimos en el universo son, en rigor, productos del propio sujeto que las conoce. Espontáneamente el sujeto cognoscente piensa que lo que intuye es algo que recibe desde un mundo externo; sostener que el arte es una forma de conocimiento es justamente el modo como Hegel está expresando que lo intuido es en todos los casos un contenido producido por el propio espíritu, que es, por así decirlo, una obra de arte humano. En el arte mismo, sin embargo, la producción de la cosa intuible es insuficiente, dado que el material que el espíritu utiliza para sus configuraciones conserva en mayor o menor medida, según el caso, una determinidad propia que resiste a la determinidad que el espíritu busca conferirle. Por esta razón, las obras de arte se presentan inicialmente como productos arbitrarios. Recién cuando integra sus intuiciones en la actividad de comprensión -actividad cognitiva con la que opera la filosofía- y media con ello completamente la determinidad de los contenidos intuidos, el espíritu configura finalmente un universo que le es propio y específico. El objetivo de mi ponencia es reconstruir desde el marco teórico recién expuesto el sentido y función que Hegel le atribuye al arte en su teoría del conocimiento. (shrink)

In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can be 100 times lower (...) than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

This study investigated the effectiveness of utilizing induced magnetism on the seed germination of radish (Raphanussativus) in terms of growth rate, growth speed, shoot growth, and overall development. This study utilized two groups that consisted of an experimental group where induced magnetism was present one control group where there was an absence of induced magnetism in the seed germination of Radish (Raphanus sativus). Moreover, this study aimed to determine the significant difference between the two in terms growth rate, growth speed, (...) shoot growth, and overall development. Both groups had the same amount of radish (Raphanus sativus) seeds planted in a rectangular wooden container with the same amount of measurement and soil content. This study used an experimental research design by utilizing the functions of an Electromagnetic Induction Device (EID) comprised of a 12v motor battery, light bulb, coiled wire, and switch. The EID was turned on for 10 minutes every day where the electric volts generated by the 12v motor battery were transported through the coiled wire and distributed to the metallic iron screen surrounding the area of the experimental group. The data gathered during the 12-day observation of the growth of radish (Raphanus sativus) were tabulated, analyzed, and evaluated using mean tests, standard deviation, and T-test. Based on the result and analyses of the gathered data, it was found that the experimental group, the one with the presence of induced magnetism, surpassed the control group in terms of growth speed, shoot growth, and overall seed development. However, it was also revealed that in terms of growth rate, there is no significant difference between the control group and experimental group. Therefore, the utilization of Induced Magnetism on the seed germination of radish (Raphanus sativus) is effective in terms of growth speed, shoot growth, and overall development. (shrink)

In recent years, a growing discussion about how we should design our cities has emerged, particularly for the more controversial modes of design such as “defensive,” “hostile,” or “disciplinary” architecture (i.e., benches on which one cannot sleep, or metal studs on which one cannot skate). Although this debate is relatively mature, many studies have argued that these design notions are undertheorized and are, thus, challenging to study from an empirical and normative perspective. In this paper, I will defne the (...) most common terms used in the literature and show how they are interconnected by utilizing a set of “conditions of adequacy” from philosophy to facilitate a more transparent and well-grounded discussion of them. Terms such as “hostile” and “defensive” design are underlined by several diferent phenomena, not just one as is sometimes commonly assumed. I will also show that these phenomena and their conceptualizations require—and sometimes force us to use—diferent moral reasons when justifying the utilization of diferent designs. (shrink)

Few have given an extended treatment of the non-statistical sense of normality: a sense captured in sentences like “dogs have four legs,” or “hammers normally have metal heads,” or “it is normal for badgers to take dust baths.” The most direct extant treatment is Bernhard Nickel’s Between Logic and the World, where he claims that the normal or characteristic for a kind is what we can explain by appeal to the right sorts of explanations. Just which explanatory strategies can (...) ground normalities, though, is difficult to determine without inviting circularity into the account. After raising this and other worries for Nickel’s account, I develop my own account according to which normal features are those which are explained by the kind of thing involved. (shrink)

The present investigation was undertaken to investigate the acute toxicity of cadmium, a heavy metal widely detected in the aquatic environment due to natural effects and anthropogenic activities, in freshwater teleost, Channa punctata (Bloch). The experiments for the bioassay were performed in semi-static test condition according to the standard guidelines. The behavioural changes in the fish were observed for all tested concentrations of the metal. The data obtained for bioassay were analyzed for median lethal concentrations (LC ) of (...) the metal by SPSS computer software. The LC 50 50 values, estimated by SPSS, with 95% confidence level were found to be:20.589 (18.326-23.221), 17.133 (14.840- 19.734), 11.815 (9.696 – 13.850) mg/L and 9.908 (7.635-12381) mg/L for cadmium chloride at 24, 48, 72 and 96 h exposure, respectively. (shrink)

Die Frage nach der Ethik in Computerspielen fragt im Kern danach, wie Computerspiele moralische Fragen aushandeln können. Ausgangspunkt ist die folgende Beobachtung: Situationen und Tätigkeiten, die in Wirklichkeit¹ moralisch brisant wären, sind seit jeher ein beliebter Gegenstand von Computerspielen. Seien es spielerische Umsetzungen von Kriegssituationen wie in den Reihen Call of Duty oder Metal Gear Solid, seien es heftige körperliche Auseinandersetzungen wie in Tekken oder auch in Super Smash Bros., seien es bleihaltige Abenteuer wie in Uncharted oder Tomb Raider (...) – in zahlreichen Fällen wie diesen führen wir beim Spielen Handlungen aus, die wir, wenn wir sie in Wirklichkeit durchführten, für... (shrink)

Air pollutants pose a threat to biodiversity throughout the world. This study was conducted to evaluate atmospheric element accumulation in Isparta city, including Gölcük Nature Park, located in the Western Mediterranean Region of Turkey. It is aimed to determine the air quality and potential pollutant sources in the region through lichen biomonitoring. Specimens of the epiphytic foliose lichen Physcia aipolia (Erh. ex Humb.) Fürnr. were sampled from 14 sites in the study area and analyzed by ICP-MS with reference material in (...) order to detect 11 trace elements; Al, As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn. The spatial distribution of these airborne elements in the study area was mapped. The results showed that the elemental sequence in terms of average concentrations measured was as follows: Ni >Cr >V >Fe >As >Al >Zn >Cu> >Cd >Mn >Pb. The results of cluster analyses of the elemental data indicated that the 3 major contaminants in the urban area were Cr, Ni, and V, probably due to the extensive use of coal in heating facilities and gasoline in vehicles. P. aipolia specimens accumulated maximal concentrations of As, Cr, Fe, Ni, and V in the northern and the southeastern localities surrounding the city, while Cd, Pb were most abundant in the eastern edge of Gölcük Nature Park. The pollution in Isparta city with heavy metal is worse than expected, mostly due to the extensive use of coal as fossil fuel. In addition, it seems to be associated with the city's topographic and climatic characteristics, e.g. inversion effects. (shrink)

Beginning with the role of the Sex Pistols’s “God Save the Queen” in Lee Edelman and J. Jack Halberstam’s debates about queer death and failure, I follow a musical motive from the Pistols track to its reappearance in Atari Teenage Riot’s 1995 “Delete Yourself .” In this song, as in much of ATR’s work from the 1990s, overlapping queer and Afro-diasporic aesthetics condense around the idea of death or “bare life.” ATR’s musical strategies treat this death as a form of (...) de-intensification and divestment— not, as in Edelman or the Pistols, as a form of negation . I will show that ATR’s musical recontextualization of the Pistols’s riff mirrors the political recontextualization of queerness and queer death from negation to disinvestment. Pushing this misprision or sticky interface between cyberpunk, queer, and Afro-diasporic musical aesthetics, I use ATR’s music to consider how queer death might work as a political response to neoliberal demands to invest in “normal” life. I first discuss the traditional concept of death as negation in both the Sex Pistols song "God Save the Queen," and in Lee Edelman and Jack Halberstam’s formulations. I then argue that Atari Teenage Riot's song “Delete Yourself” describes a neoliberal, biopolitical concept of death, death as carefully administered divestment. Finally, I use Deleuze and Guattari’s discussion of drugs, and Ronald Bogue’s Deleuzian reading of death metal to identify and explain how “MIDIjunkies” and “Into the Death” complicate the biopolitical/neoliberal management of death by reworking traditional black/queer critical aesthet- ics. In these songs, ATR undermine biopolitical neoliberalism’s demand to invest in and intensify regular “normal” life: rather than treating death as a nadir of intensity, they intensify it–that is, they go into the death. This strategy of going “into the death” is one possible queer necropolitical response to neoliberalism. (shrink)

This paper introduces post-place branding in the context of the post-representationalist turn in marketing research by drawing on Deleuze and Guattari’s (A thousand plateaus: capitalism and schizophrenia, University of Minnesota Press, Minneapolis, 1987) theory of nomadology. By engaging critically with fundamental concepts in the place and destination branding literature, post-place branding offers an alternative perspective to entrenched definitions of subjectivity, place, and event experiencing, by effecting a paradigmatic shift from processing monad to nomad, from event as symbolic structure to micro-events, (...) from pre-constituted place to spacing in the process of deand reterritorializations. Post-place branding is illustrated by re-imagining the brand architectural components of the experiential events of 70,000 Tons of Metal and The Boiler Room. The analysis culminates in a metaphorical modeling exercise that draws nomadological guidelines for brandcomms’ message strategy. (shrink)

"Jim would still be alive if he hadn't jumped" means that Jim's death was a consequence of his jumping. "x wouldn't be a triangle if it didn't have three sides" means that x's having a three sides is a consequence its being a triangle. Lewis takes the first sentence to mean that Jim is still alive in some alternative universe where he didn't jump, and he takes the second to mean that x is a non-triangle in every alternative universe where (...) it doesn't have three sides. Why did Lewis have such obviously wrong views? Because, like so many of his contemporaries, he failed to grasp the truth that it is the purpose of the present paper to demonstrate, to wit: No coherent doctrine assumes that statements about possible worlds are anything other than statements about the dependence-relations governing our world. The negation of this proposition has a number of obviously false consequences, for example: all true propositions are necessarily true (there is no modal difference between "2+2=4" and "Socrates was bald"); all modal terms (e.g. "possible," "necessary") are infinitely ambiguous; there is no difference between laws of nature (e.g. "metal expands when heated") and accidental generalizations (e.g. "all of the coins in my pocket are quarters"); and there is no difference between the belief that 1+1=2 and the belief that arithmetic is incomplete. Given that possible worlds are identical with mathematical models, it follows that the concept of model-theoretic entailment is useless in the way of understanding how inferences are drawn or how they should be drawn. Given that the concept of formal-entailment is equally useless in these respects, it follows that philosophers and mathematicians have simply failed to shed any light on the nature of the consequence-relation. Q's being either a formal or a model-theoretic consequence of P is parasitic on its bearing some third, still unidentified relation to P; and until this relation has been identified, the discipline of philosophical logic has yet to begin. (shrink)

Extensive scientific, philosophical and artistic activities were carried out in the Islamic World’s various science and civilization centers during the early Middle Ages. In these centers, noteworthy works of mathematics, astronomy, geography, medicine, pharmacology, optics, botany, chemistry and other fields of science, which would later determine improvement paths for these fields, were created. Abu al-Izz Ismail ibn al-Razzaz al-Jazari (12th-13th centuries), was a magnificent Muslim scientist known for his work named The Book of Knowledge of Ingenious Mechanical Devices (Kitab fi (...) ma‘rifati’l-hiyal al-handasiyya) and he was born in geography where many scientists were trained. He contributed to the development of science and civilization, the joint legacy of humanity and demonstrated his true capability and success in the field of ilm al-hiyal (the scientific field which addresses the information and practices regarding mechanical technology and engineering in Islamic science history). From this perspective, it is evident that al-Jazari had a wide field of interest, made his mark in the age he lived in with his brave and innovative ideas, and was a wise engineer. al-Jazari’s detailed descriptions and explanations of water clocks, oil lamp clocks and water pumping machines, as well as their construction, were astounding. In addition, al-Jazari’s studies on metal casting techniques, cone valves, wheel balance and the real-world use of aspiration tubes are important in contemporary engineering studies. When all these are considered, it becomes clear that his designation as the “Leonardo da Vinci of the Islamic World” is not a coincidence. Many studies on al-Jazari’s scientific legacy have been conducted in various parts of the world. There are various manuscripts of his aforementioned book. Based on these manuscripts, the work has been -fully or partially- translated into many languages, including Turkish. The German and English translations served as a basis for studies on al-Jazari in other languages. In recent years, studies conducted on al-Jazari in Türkiye (books, articles, domestic and international symposiums, congresses etc.) have demonstrated his brilliance and competence as a scientist. Furthermore, studies on al-Jazari are still ongoing in Türkiye. As for Russia, the scientific legacy of the scientists raised in the Islamic World such as Avicenna, al-Farabi, Abu Bakr al-Razi, Abu Rayhan al-Biruni, Abu al-Qasim al-Zahrawi, Muhammad ibn Musa al-Khwarizmi, al-Battani, al-Kashi, Abd al-Rahman al-Khazini, Nasir al-Din al-Tusi was researched within the scope of a special plan and program. Depending on the relevant studies, al-Jazari and his work drew attention as well. A small portion of the aforementioned Russian studies is known in Türkiye. It is safe to assume that al-Jazari studies in Russia are virtually unknown in Türkiye. The present study primarily aims to contribute to the literature on the scientific legacy of al-Jazari, a Middle Age Islamic scientist best known for his famous work in the mechanical field. More specifically, the present study aims to: 1) to identify the studies on al-Jazari in Russia, and in the former USSR countries, where academic studies are still in Russian after the Soviet Union period, to create a chronological biography and to set forth their compilation; in other words, to create a bibliography which includes Russian studies on al-Jazari; 2) to provide information on the structure and content of the studies in question, to detect the methodological issues encountered in these works, and make solution recommendations to solve these issues; 3) to contribute to continuing and future studies in Türkiye on al-Jazari in terms of source and material index. In conclusion, it should be stated that comparative reading was conducted centered on The Book of Knowledge of Ingenious Mechanical Devices (Kitab fi ma‘rifati’l-hiyal al-handasiyya). It should also be noted that Russian popular internet publications (which are not based on academic research and are created/reproduced for commercial and personal purposes) were excluded from the assessment. (shrink)