The use of AFM for scanning probe lithography also suffers from power-related problems, but it is better suited than STM for this task due to the less stringent requirements of the technique: no very high vacuum conditions. , conductive surface or very good tip-to-sample distance control is required. Scanning probe nanolithography based on AFM can be performed through different mechanisms and offers a wide range of possibilities . Therefore, the AFM tip can produce localized changes in the composition, height, or (...) physical/chemical properties of surfaces through thermal effects, mechanical effects, deposition, chemical effects, etc. The principle of this technique for making electronic nano devices has been drawn and the example of making Si nanowires based on the oxidation of nanolithography probe Scanning is done. A derived technique that has become very popular is dip-pen nanolithography, in which the tip deposits specific inks with excellent clarity at desired locations. -/- . (shrink)

In general, in order to receive the electromagnetic wave in the space, the dimensions of the antenna must be in the order of the wavelength of the input to its surface. Due to the very small dimensions of nano sensors, nano antennas need to have a very high working frequency to be usable. The use of graphene helps to solve this problem to a great extent. The speed of propagation of waves in CNTs and GNRs can be 100 times lower (...) than its speed in vacuum, and this is related to the physical structure, temperature and energy. Based on this, the resonance frequency of graphene-based nano-antennas can be two orders of magnitude lower than nano-antennas based on nano-carbon materials. It has been mathematically and theoretically proven that a quasi-metallic carbon nanotube can emit terahertz radiation when a time-varying voltage is applied to its sides. One of the most important parameters of any nano antenna is the current distribution on it. This characteristic determines the radiation pattern, radiation resistance and reactance and many important characteristics of the antenna. Despite the possibilities of making nanotubes with a length of several centimeters, it is possible to make electrical conductors with a length-to-width ratio of the order of 10^7. has it. At first glance, nanotube antennas give us the impression that they are similar to Dipole antennas designed in small dimensions. (shrink)

Nowadays, many semiconductors such as silicon are used in a wide range of nanoelectronic devices. However, due to the range of thermal changes and its extremely high speed, nano diamond is only compared to gold nanoparticles, which is the second best nano semiconductor in the world. Nano graphite and graphene nano strips are electrically conductive due to cloud scattering. Active nano diamond particles with such features, especially electronic ones, can be the foundation of completely new types of powerful nano (...) electronic devices. (shrink)

MEMS is a structural technology, an example of the design and development of sophisticated, well integrated electronics systems and mechanical devices utilizing single-stage manufacturing techniques . Techniques for making the MEMS enables the components and equipment with performance and increased production are combined with the advantages of the ordinary, such as reducing the size of the physical volume, weight and cost and providing a basis for the production of non-manufacturing methods, the other is the reality of internal order Technology (...) MEMS and its micro-machining techniques are well versed in its application to an unprecedented range of MEMS devices over previous dependent fields (for example Biology and Microelectronics) These agents make MEMS far more comprehensive than IC microchips technology . (shrink)

Note: NI_nanoparticle nickel nanoparticles is a strong conductor of electric current and its surface is shiny and polished. This element belongs to the group of iron and cobalt elementsUsing particles from the microscale to the nanoscale provides benefits for various scientific fields, but because a large percentage of their atoms is on the surface, nanomaterials can be highly reactive and pose risks. have a potential for humans. Nanoparticles are of great interest due to their wide application, both in industry and (...) in the natural sciences. While natural materials have constant physical properties regardless of size, the size of a nanoparticle determines its physical and chemical properties. Therefore, the properties of a material change as its size approaches the nanoscale and the percentage of atoms on the surface of the material becomes significant. The important feature of all nano structures is that in which the number of surface atoms is more than the number of volume atoms. This ratio increases with decreasing nanoparticle size. Therefore, the size of the nanoparticle is considered its most important feature. The range of activity of nanoparticles depends on the nature and shape of the nanostructure. However, if the energy of the nanoparticle field is comparable to the energy of electromagnetic radiation and if in a certain range a wavelength with the occurrence of chemical reactions in materials Under irradiation, significant changes will be made in the activity of nanoparticles up to 100 nm in size. is the nanometer expected to be used for storage. Given the relatively large (physically speaking) storage devices we have now and the fact that we need gigabyte sizes in various areas, there is a high potential for activity in this There is a context. Each quantum dot consists of a discrete ball of several hundred atoms that can have one of two magnetic states. This allows them to contain a single bit of information (zero or one), as is customary in machine computing. In conventional hard disks, the data bits must be spaced far enough apart that they do not overlap. Quantum dots act as completely independent units that are not structurally connected, so they can become somewhat closer to each other. One of the new information storage tools is the use of nickel quantum dots in nanometer sizes, which are expected to be used to store terabytes of data. (shrink)

Devices based on organic materials can be mechanically flexible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make flexibility impossible in them. Makes. Properties such as strength, flexibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties (...) of the material by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

based on organic materials can be mechanically exible to a large extent because of the loose intermolecular bonds in the nano-electrons created from them. Unlike these organic materials, minerals such as silicon, germanium, and gallium arsenide can be used in the structure of electronic devices only in crystalline states, and in this case, covalent bonds make exibility impossible in them. Makes. Properties such as strength, exibility, electrical conductivity, magnetic properties, color, reactivity, etc. Starting to change the properties of the (...) material by shrinking it depends more than anything on the type of material and the desired property. For example, by reducing the dimensions of a material, generally some mechanical properties of the material such as strength are improved. This increase in strength does not happen only in the range of a few nanometers, and the strength of materials of several tens and even hundreds of nanometers may be much higher than the large-scale mass material. On the other hand, the change of some properties such as color and magnetic properties may occur in dimensions of only a few nanometers. (shrink)

nanological gates, in order to design nano-scale computers with dual-scale capabilities. All living biological systems function due to the molecular interactions of different subsystems. Molecular components (proteins and nucleic acids, lipids and carbohydrates, DNA and RNA) can be used as an inspirational strategy on how to design high-performance NEMS and MEMS that have the required features and characteristics. Considered. In addition, analytical and numerical methods are available for dynamic analysis and three-dimensional geometry, bonding and other properties of atoms and molecules. (...) Thus, electromagnetic and mechanical, and other physical and chemical properties can be studied. Nanostructures and nanosystems can be widely used in medicine and health. Possible applications of nanotechnology include: drug synthesis and drug delivery (therapeutic potential is greatly increased due to the effective direct delivery of new types of drugs to specific sites in the body), nanosurgery and nanotherapy Synthesis and detection of genomes, nano-scale stimuli and sensors (diagnosis and prevention of disease), design and implantation of non-rejection artificial organs and design of high performance nanomaterials. It is important that these technologies change the manufacture of materials, devices and systems. (shrink)

Graphene nanomemories have been developed molecularly, providing excellent programmable nanoscale memory performance compared to previous graphene memory devices and a memory window. Large (12V), fast switching speed (1 microsecond), shows strong electrical reliability. Graphene molecular nanomemories show unique electronic properties, and their small dimensions, structural strength, and high performance make them a charge storage medium for Nano memory applications. We use a set of techniques involving a solution of nanoparticles, which creates a very thin layer on the target substrate (...) and is used as a sacrificial layer during the nanopatterning process. (shrink)

Note: Nanoelectronics technology has dedicated some very exciting materials to improve the sensing phenomenon. The use of various nanomaterials, including nanoparticles, nanotubes, nanotubes, and nanowires, causes faster identification and reproducibility in a much better way. The unique properties of nanomaterials such as high electrical conductivity, better shock tolerance, and sensitive responses such as versatile piezo-electric and color detection mechanisms are only results of the multitude of properties of nanomaterials. Different types of biosensors are propagated based on different types of (...) nano materials and their developmental and implicit aspects. Measurement of biological responses has assumed great importance in the current scenario of ever-dynamic environmental developments and altered hemostatic events occurring at the in vivo as well as intracorporeal level. Analyzing the behavior of changing materials is of great importance in areas such as pharmaceutical diagnostics, food quality screening, and environmental applications. (shrink)

Production of nano supercapacitors using nanoparticles that can be polarized so that electrical energy can be stored. Nanostructure multilayer technology (solid state) is a known dielectric material used in nano supercapacitors because it is a piezoelectric and ferroelectric material. In this work, by creating passive filters, they provide storage between different types of these electric nano layers. The degree of electrical properties in solid materials (nanosupercapacitors) is very diverse. Based on the amount of resistance (nano supercapacitors) against the passage of (...) electric current, different materials can be divided into categories classified as conductor, semiconductor, and insulator. Meanwhile, in superconductors, there is a different mechanism to guide electrons. (Nano supercapacitors) can be defined as the number of free electrons that move freely in the material under the influence of an external electric field, as well as mobility, which is a measure of the ability and speed of free electrons to move, attributed. (shrink)

The development of machine learning and deep learning (DL) in the field of AI (artificial intelligence) is the direct result of the advancement of nano-electronics. Machine learning is a function that provides the system with the capacity to learn from data without being programmed explicitly. It is basically a mathematical and probabilistic model. DL is part of machine learning methods based on artificial neural networks, simply called neural networks (NNs), as they are inspired by the biological NNs that constitute organic (...) brains. Despite its similarity to biological organs such as human brains, major problems arise in trying to attribute moral responsibility to autonomic systems based on hardware including nano-electronic devices, which are sought to replace humans (moral agents) in the context of AI. It is suggested that the required emotional environment which enables actions according to reasons in humans is not witnessed at AI devices. Though AI technology raises an enticing resemblance to human actions, this resemblance is to be considered with a skeptical eye. It is because actions are associated with reasons while causes are connected to operations. Human agents are capable of acting upon their reasons, while AI devices are limited only to operations as they are conditioned by their programming, which is considered as an embodiment of some causes. As moral responsibility goes hand in hand with the capacity to act (according to reasons), attributing moral responsibility to AI devices is revealed to be but a misleading metaphor. (shrink)

The recent advent of high-resolution imaging and force spectroscopy using atomic force mi- croscopy (AFM) in organic and inorganic solutions opens the way to imaging a wide variety of surfaces and their solvent structure. However, to take full advantage of the high resolution and provide signicant new analytical capability, a detailed understanding of the background contrast mechanisms that lead to atomic and molecular resolution is critical. Without a theory that connects the measured force to atomic models of the surface and (...) tip of the microscope, the information that can be distilled from these measurements is limited. Molecular dynamics simulations show that the forces acting on the microscope tip result from the direct interaction between a tip and a surface and are entirely due to the structure of water around the tip and surface. (shrink)

An increase in the surface-to- volume ratio and changes in geometry and electronic structure have a strong impact on the chemical interactions of matter, and for example, the activity of small particles changes with changes in the number of atoms (and thus the size of the particles). Unlike today's nano-transistors, which behave based on the movement of a mass of electrons in matter, new devices follow the phenomena of quantum mechanics at the nano scale, in which the discrete nature (...) of electrons cannot be ignored. By reducing all the horizontal and vertical dimensions of the transistor, the electric charge density increases in different areas of the nano-transistor , or in other words, the number of electric charges per unit area of the nano-transistor increases. (shrink)

Nanotechnology, as with many technologies before it, places a strain on existing legislation and poses a challenge to all administrative agencies tasked with regulating technology-based products. It is easy to see how statutory schemes become outdated, as our ability to understand and affect the world progresses. In this article, we address the regulatory problems that nanotechnology posses for the Food and Drug Administration’s (FDA) classification structure for ‘‘drugs’’ and ‘‘devices.’’ The last major modification to these terms was in 1976, (...) with the enactment of the Medical Device Amendments. There are serious practical differences for a classification as a drug or device in terms of time to market and research. Drugs are classified, primarily, as acting by ‘‘chemical action.’’ We lay out some legal, philosophic, and scientific tools that serve to provide a useful, as well as legally and scientifically faithful, distinction between drugs and devices for the purpose of regulatory classification. These issues we raise are worth the consideration of anyone who is interested in the regulation of nano-products or other novel technologies. (shrink)

As has recently been highlighted, despite the prevalence of methodological “confessional tales” in ethnography generally, the challenges of undertaking ethnographic research specifically in institutional sports settings remain underexplored. Drawing on data from a 3-year ethnographic study of competitive swimming in the United Kingdom (UK), here we explore some of the practical challenges of balancing different elements of the researcher’s role when undertaking ethnographic “insider” research in familiar settings. In particular, we consider the difficulties of balancing the role of a doctoral (...) researcher and the chosen research role of a volunteer coach with a competitive swimming program. Employing the anthropological concept of liminality, we also analyze the lived challenges of leaving a highly familiar field and entering a state of liminality, where the researcher was caught on the threshold betwixt and between a return to full-time employment in the former “known” role of coach, and a move forward to embrace a new “unknown” role as a full-time member of academic staff. (shrink)

Nanowires ( SiNWs) have high mobility and surface-to-volume ratio, which makes them easy to control using a weak electric field. These one-dimensional nanostructures are created from nanowires with a diameter in the range of nanometers and a length of more than a micrometer. It has been done in the manufacture of nanowires through regular one-dimensional arrays with the help of different physical and chemical methods. Methods such as the use of electron beam or lithography method, heavy ion irradiation, laser, chemical (...) and electrochemical methods such as water heat and spontaneous assembly methods used to make the membranes of molds can also be used . In making one-dimensional nanostructures such as Oligophenylene vanillin nanowires The electro-accumulation method consists of three general steps: firstly, the creation of a porous template as a suitable substrate and framework for the accumulation of nanowires, secondly, the growth of nanowires along the cavities of the template, and thirdly, removing the template and separating the nanowires from it. The nanowires are directly dependent on the characteristics of the mold surface such as the size distribution of the holes, the density of the holes and the superiority of the surface of the nano-holes. In order to control the properties of Oligophenylene vanillin nanowires, parameters that are effective in the formation and optimization of the diameter of the holes and the thickness of the mold should be considered. (shrink)

Wearable devices are increasingly present in the health context, as tools for biomedical research and clinical care. In this context, wearables are considered key tools for a more digital, personalised, preventive medicine. At the same time, wearables have also been associated with issues and risks, such as those connected to privacy and data sharing. Yet, discussions in the literature have mostly focused on either technical or ethical considerations, framing these as largely separate areas of discussion, and the contribution of (...) wearables to the collection, development, application of biomedical knowledge has only partially been discussed. To fill in these gaps, in this article we provide an epistemic (knowledgerelated) overview of the main functions of wearable technology for health: monitoring, screening, detection, and prediction. On this basis, we identify 4 areas of concern in the application of wearables for these functions: data quality, balanced estimations, health equity, and fairness. To move the field forward in an effective and beneficial direction, we present recommendations for the 4 areas: local standards of quality, interoperability, access, and representativity. (shrink)

A short overview, written for a primarily scientific audience, of how conceptual analysis and philosophy of science can assist in nanoscience research.

The current debate on closed-loop brain devices (CBDs) focuses on their use in a medical context; possible criminal justice applications have not received scholarly attention. Unlike in medicine, in criminal justice, CBDs might be offered on behalf of the State and for the purpose of protecting security, rather than realising healthcare aims. It would be possible to deploy CBDs in the rehabilitation of convicted offenders, similarly to the much-debated possibility of employing other brain interventions in this context. Although such (...) use of CBDs could in principle be consensual, there are significant differences between the choice faced by a criminal offender offered a CBD in the context of criminal justice, and that faced by a patient offered a CBD in an ordinary healthcare context. Employment of CBDs in criminal justice thus raises ethical and legal intricacies not raised by healthcare applications. This paper examines some of these issues under three heads: autonomy, human rights, and accountability. (shrink)

Two critical yet comic elements, beyond the more obvious narrative of persecution, reveal themselves in Adorno's recorded nightmare. The first is comic because it so aptly displays his relentless critical impulse despite himself, the way in which theory invades the private sphere of his dreams: even in sleep, Adorno finds himself at once reading phenomena and on guard against a false transcendence from which they could, in the last instance, be deciphered.1 The second is more patently absurd, yet perhaps more (...) difficult to assess: that he should gain permission to interrupt an unspeakably cruel and final punishment, an essentially hopeless…. (shrink)

The integration of Internet Protocol and Embedded Systems can enhance the communication platform. This paper describes the emerging smart technologies based on Internet of Things (IOT) and internet protocols along with embedded systems for monitoring and controlling smart devices with the help of WiFi technology and web applications. The internet protocol (IP) address has been assigned to the things to control and operate the devices via remote network that facilitates the interoperability and end-to-end communication among various devices (...) c,onnected over a network. The HTTP POST and HTTP GET command that supports the RESTful service have been used to ensure the transmission and reception of packets between the IOT Gateway and Cloud Database. The emerging smart technologies based on the Internet of Things (IoT) facilitated features like automation, controllability, interconnectivity, reliability which in turn turn paved the way for a wide range of acceptance amongst the masses. The Internet of Things (IoT) has brought in many new emerging technologies into varoius field like our daily lives, industry, agricultural sector, and many more. The world is experiencing the explosive growth with the advent of Internet of Things (IoT) these years. The potential growth of IoT is enoromous which is evidenced by all the human beings in our day to day life. (shrink)

Many experienced runners consider the use of wearable devices an important element of the training process. A key techno-utopic promise of wearables lies in the use of proprietary algorithms to identify training load errors in real-time and alert users to risks of running-related injuries. Such real-time ‘knowing’ is claimed to obviate the need for athletes’ subjective judgements by telling runners how they have deviated from a desired or optimal training load or intensity. This realist-contoured perspective is, however, at odds (...) with sociological research indicating that users of wearables engage in active ‘data sense-making’ that is highly contextualised. To investigate how athletes use (or not) algorithmic analysis to understand, make sense of, and improve their performance in real-time, we undertook qualitative interviews with distance runners to explore lived experiences of running with wearables. The runners described how they actively interpreted data from wearables, drawing on their own experience, ‘somatic knowledge’, and embodied ways of knowing. This allowed them to assess the relevance and usefulness of data in relation to their own goals, intentions, and feelings. Our findings challenge the techno-utopic promises of real-time and predictive analytics. (shrink)

Background The purpose of this study was to examine whether extended use of a variety of screen-based devices, in addition to television, was associated with poor dietary habits and other health-related characteristics and behaviors among US adults. The recent phenomenon of binge-watching was also explored. -/- Methods A survey to assess screen time across multiple devices, dietary habits, sleep duration and quality, perceived stress, self-rated health, physical activity, and body mass index, was administered to a sample of US (...) adults using the Qualtrics platform and distributed via Amazon Mechanical Turk (MTurk). Participants were adults 18 years of age and older, English speakers, current US residents, and owners of a television and at least one other device with a screen. Three different screen time categories (heavy, moderate, and light) were created for total screen time, and separately for screen time by type of screen, based on distribution tertiles. Kruskal-Wallis tests were conducted to examine differences in dietary habits and health-related characteristics between screen time categories. -/- Results Aggregate screen time across all devices totaled 17.5 h per day for heavy users. Heavy users reported the least healthful dietary patterns and the poorest health-related characteristics – including self-rated health – compared to moderate and light users. Moreover, unique dietary habits emerged when examining dietary patterns by type of screen separately, such that heavy users of TV and smartphone displayed the least healthful dietary patterns compared to heavy users of TV-connected devices, laptop, and tablet. Binge-watching was also significantly associated with less healthy dietary patterns, including frequency of fast-food consumption as well as eating family meals in front of a television, and perceived stress. -/- Conclusions The present study found that poorer dietary choices, as well as other negative health-related impacts, occurred more often as the viewing time of a variety of different screen-based devices increased in a sample of US adults. Future research is needed to better understand what factors among different screen-based devices might affect health behaviors and in turn health-related outcomes. Research is also required to better understand how binge-watching behavior contributes impacts health-related behaviors and characteristics. (shrink)

While every health care system stakeholder would seem to be concerned with obtaining the greatest value from a given technology, there is often a disconnect in the perception of value between a technology’s promoters and those responsible for the ultimate decision as to whether or not to pay for it. Adopting an empirical ethics approach, this paper examines how five Canadian medical device manufacturers, via their websites, frame the corporate “value proposition” of their innovation and seek to respond to what (...) they consider the key expectations of their customers. Our analysis shows that the manufacturers’ framing strategies combine claims that relate to valuable socio-technical goals and features such as prevention, efficiency, sense of security, real-time feedback, ease of use and flexibility, all elements that likely resonate with a large spectrum of health care system stakeholders. The websites do not describe, however, how the innovations may impact health care delivery and tend to obfuscate the decisional trade-offs these innovations represent from a health care system perspective. Such framing strategies, we argue, tend to bolster physicians’ and patients’ expectations and provide a large set of stakeholders with powerful rhetorical tools that may influence the health policy arena. Because these strategies are difficult to counter given the paucity of evidence and its limited use in policymaking, establishing sound collective health care priorities will require solid critiques of how certain kinds of medical devices may provide a better (i.e., more valuable) response to health care needs when compared to others. (shrink)

Objectives: In recent years, adolescents spend increasingly more time on technologic devices such as smartphones, televisions, computers, and tablets. The aim of the present study was to investigate the relationship between the usage of digital technology and health-related problems among adolescents. -/- Methods: A cross-sectional exploratory study was conducted by using a face-to-face survey administered to a sample of students studying at 4 randomly chosen public middle school and 4 randomly chosen public high school in the city of Istanbul. (...) In this study recruited 1147 volunteer adolescents. All participants were answered a questionnaire regarding the demographic characteristics, technological devices useage patterns and health-related problems. -/- Results: Most of the adolescents had smartphones (99.4%) and the fewest had game consoles (18.2%). The rate of using television and smartphone for more than two hours a day among adolescents was 13.1% and 28.4%, respectively. A decrease in sleep duration, increase in falling asleep time, distraction, fatigue, eating disorders and psychological symptoms were significantly more present for individuals using smartphone more than two hours. A positive and very weak relationship was detected between the duration of smartphone use and neck (r=0.096; p=0.002), wrist (r=0.079; p=0.008) and shoulder (r=0.069; p=0.021) pain. Also, positive and very weak relationship was detected between the duration of computer use and upper back (r=0.102; p=0.001), lower back (r=0.078; p=0.011) and shoulder (r=0.069; p=0.041) pain. -/- Conclusion: This study showed the most widely used technological device among adolescents is smartphones and it was observed that the excessive use of this device among adolescents is more associated with many different health-related problems than other technological devices. (shrink)

One method for preventing the spread of the coronavirus and other contagious diseases is through social distancing. Therefore, creating a tool to measure and quickly discover the precise distance is necessary. In order to prevent physical contact between individuals, this study aimed to detects individuals’ physical distance, through an inaugurated battery-powered device that monitors physical distance through wireless technology. Specifically, in public or crowded areas, to lessen the spread of the virus. This study focuses on detecting people’s physical distance in (...) the region of interest utilizing an Ultrasonic and VL53L0X sensors and determining the significant difference between the two sensors in monitoring physical distance. This study employs an applied experimental research design. The efficiency of both sensors in measuring physical distance was evaluated through analysis. The Ultrasonic and VL53L0X sensors underwent 15 tests. Furthermore, the researchers effectuated a t-test to determine the significant difference between the two sensors. Data gathered revealed that the sensors’ combined mean in terms of measuring physical distance indicates that the ultrasonic sensor performed better than VL53L0X, measuring 134.7 cm, notwithstanding 99.8 cm for the VL53L0X sensor. Complementary to this, the results of the t-test show that the VL53L0X sensor and Ultrasonic sensor have a significant difference in terms of distance precision. (shrink)

The purpose of the study is to determine the relationship between the level of usage to technological devices and the academic performance of Grade II learners in selected Multigrade School in Hilongos South District, Hilongos, Leyte. The study used descriptive survey design since the researcher used checklist to determine the learner’s level of usage to technological devices and survey it used open-ended question to determine how technological devices help the learners in learning. More so, both qualitative and (...) quantitative data were being gathered for the further validation of the quantitative data of the study. The result shows that the level of usage of the learners is at Normal Level. The learners understudy is using technology devices at a tolerable level, that is, 3 – 4 hours in a day. The learners performed well in English with a Closely Approaching Mastery Level in their Quarterly Assessment. The level of usage of the learners to technological devices has a significant relationship with the English performance of the learners. The more exposed the students are to technological devices the more affected their performance in English are. Using to technological devices has a detrimental effect on English performance of the learners. Hence, the parent’s guidance to their children is a must. It can be concluded that usage to technological devices can significantly affect performance. As resulted, using to technological devices has a detrimental effect on English performance. The use of television, cellphones, tablets and computers at a regular basis affects the academic performance of the learners. The more they are using technological devices, the more their academics are negatively affected. Hence, parents or guardian of the learners should be watchful to their children so that they can guide and discipline them in using technological devices to evade bane result from these devices. (shrink)

The introspective devices framework proposed by Kammerer and Frankish (this issue) offers an attractive conceptual tool for evaluating and developing accounts of introspection. However, the framework assumes that different views about the nature of introspection can be easily evaluated against a set of common criteria. In this paper, I set out to test this assumption by analysing two formal models of introspection using the introspective device framework. The question I aim to answer is not only whether models developed outside (...) of philosophy can be successfully evaluated against the set of conceptual criteria proposed by Kammerer and Frankish, but also whether this kind of evaluation can reveal some limitations inherent to the framework. (shrink)

Technological developments involving robotics and artificial intelligence devices are being employed evermore in elderly care and the healthcare sector more generally, raising ethical issues and practical questions warranting closer considerations of what we mean by “care” and, subsequently, how to design such software coherently with the chosen definition. This paper starts by critically examining the existing approaches to the ethical design of care robots provided by Aimee van Wynsberghe, who relies on the work on the ethics of care by (...) Joan Tronto. In doing so, it suggests an alternative to their non-principled approach, an alternative suited to tackling some of the issues raised by Tronto and van Wynsberghe, while allowing for the inclusion of two orientative principles. Our proposal centres on the principles of autonomy and vulnerability, whose joint adoption we deem able to constitute an original revision of a bottom-up approach in care ethics. Conclusively, the ethical framework introduced here integrates more traditional approaches in care ethics in view of enhancing the debate regarding the ethical design of care robots under a new lens. (shrink)

Newton’s impact on Enlightenment natural philosophy has been studied at great length, in its experimental, methodological and ideological ramifications. One aspect that has received fairly little attention is the role Newtonian “analogies” played in the formulation of new conceptual schemes in physiology, medicine, and life science as a whole. So-called ‘medical Newtonians’ like Pitcairne and Keill have been studied; but they were engaged in a more literal project of directly transposing, or seeking to transpose, Newtonian laws into quantitative models of (...) the body. I am interested here in something different: neither the metaphysical reading of Newton, nor direct empirical transpositions, but rather, a more heuristic, empiricist construction of Newtonian analogies. Figures such as Haller, Barthez, and Blumenbach constructed analogies between the method of celestial mechanics and the method of physiology. In celestial mechanics, they held, an unknown entity such as gravity is posited and used to mathematically link sets of determinate physical phenomena (e.g., the phases of the moon and tides). This process allows one to remain agnostic about the ontological status of the unknown entity, as long as the two linked sets of phenomena are represented adequately. Haller et. al. held that the Newtonian physician and physiologist can similarly posit an unknown called ‘life’ and use it to link various other phenomena, from digestion to sensation and the functioning of the glands. These phenomena consequently appear as interconnected, goal-oriented processes which do not exist either in an inanimate mechanism or in a corpse. In keeping with the empiricist roots of the analogy, however, no ontological claims are made about the nature of this vital principle, and no attempts are made to directly causally connect such a principle and observable phenomena. The role of the “Newtonian analogy” thus brings together diverse schools of thought, and cuts across a surprising variety of programs, models and practices in natural philosophy. (shrink)

Contemporary reasoning about health is infused with the work products of experts, and expert reasoning about health itself is an active site for invention and design. Building on Toulmin’s largely undeveloped ideas on field-dependence, we argue that expert fields can develop new inference rules that, together with the backing they require, become accepted ways of drawing and defending conclusions. The new inference rules themselves function as warrants, and we introduce the term “warranting device” to refer to an assembly of the (...) rule plus whatever material, procedural, and institutional resources are required to assure its dependability. We present a case study on the Cochrane Review, a new method for synthesizing evidence across large numbers of scientific studies. After reviewing the evolution and current structure of the device, we discuss the distinctive kinds of critical questions that may be raised around Cochrane Reviews, both within the expert field and beyond. Although Toulmin’s theory of field-dependence is often criticized for its relativism, we find that, as a matter of practical fact, field-specific warrants do not enjoy immunity from external critique. On the contrary, they can be opened to evaluation and critique from any interested perspective. (shrink)

Francisco Gil-White argues that the ubiquity of racialism—the view that so-called races have biological essences—can be explained as a by-product of a shared mental module dedicated to ethnic cognition. Gil-White’s theory has been endorsed, with some revisions, by Edouard Machery and Luc Faucher. In this skeptical response I argue that our developmental environments contain a wealth, rather than a poverty of racialist stimulus, rendering a nativist explanation of racialism redundant. I also argue that we should not theorize racialism in isolation (...) from racism, as value judgments may play a role in essentialist thinking about the ‘other’. (shrink)

What if a blind person could 'see' with her ears? Thanks to Sensory Substitution Devices (SSDs), blind people now have access to out-of-reach objects, a privilege reserved so far for the sighted. In this paper, we show that the philosophical debates have fundamentally been mislead to think that SSDs should be fitted among the existing senses or that they constitute a new sense. Contrary to the existing assumption that they get integrated at the sensory level, we present a new (...) thesis according to which they are not sensory, and get vertically integrated on the top of existing sensory abilities, from which they should be theoretically distinguished. (shrink)

Despite how revered Socrates is among many educators nowadays, he can seem in the end to be a poor model for them, particularly because of how often he refutes his interlocutors and poses leading questions. As critics have noted, refuting people can turn them away from inquiry instead of drawing them in, and being too directive with them can squelch independent thought. I contend, though, that Socrates' practices are more defensible than they often look: although there are risks in refuting (...) people and posing leading questions, Socrates has sensible ways of minimizing the risks, ways that are feasible even for teachers nowadays, and there are times when the risks are worth taking. I illustrate my point by discussing Plato's _Meno_. (shrink)

In “Value Ascriptions: Rethinking Cognitivism,” Sigrún Svavarsdóttir offers a novel account of the semantic function of evaluative predication, according to which such predicates function as “linguistically encoded classificatory devices.” This short paper raises three questions about Svavarsdóttir’s account: how it relates to familiar sorts of projects in and about semantics, how to understand the nature of “linguistic encoding,” and how to understand the significance of the account’s central use of sets.

Abstract: Science and emerging technologies should not be predominantly tasked with furnishing us with more sustainable societies. Continuous short-term technological bail outs without taking into account the longer socio-cultural incubation times required to transition to ‘weakly sustainable’ economies squander valuable resources and time. Emerging technologies need to be deployed strategically to buy time in order to have extended political, social and ethical discussions about the root-causes of unsustainable economies and minimize social disruptions on the path towards global sustainability. Keywords: (...) class='Hi'>Nanoscience; nanotechnology; expanded materials design space; dematerialization; sustainability; permanent resource crises . (shrink)

A restricted-use mobile device policy for introductory philosophy classrooms is presented and defended. The policy allows students to use devices only during open periods announced by the professor and is based on recent empirical findings on the effects of in-class mobile device use. These results suggest devices are generally detrimental to student learning, though they have targeted benefits for specific tasks. The policy is defended via a discussion of the ethical considerations surrounding device use, a discussion of the (...) policy’s benefits, and responses to potential objections. Avenues for future research are suggested at the conclusion of the discussion. (shrink)

This paper investigates the emotional import of literary devices deployed in fiction. Reflecting on the often-favored approach in the analytic tradition that locates fictional characters, events, and narratives as sources of readers’ emotions, I attempt to broaden the scope of analysis by accounting for how literary devices trigger non-cognitive emotions. I argue that giving more expansive consideration to literary devices by which authors present content facilitates a better understanding of how fiction engages emotion. In doing so, I (...) also explore the somatic dimension of reading fiction. (shrink)

In 1713 the scientific instrument-maker Jakob Leupold published designs for three machines were the first attempt to design machinery with internal moving parts that replaced human agency in creating original images. This paper first analyzes his text and engravings in order to explain how he proposed to do this, given contemporary materials and command of physical forces. Next, it characterizes the devices as a transition from concepts of incision to concepts of mirroring, taken as models of the history of (...) mechanical reproduction. And finally, Leupold’s replacement of the sighting grid with differential gears points to a set of problems appearing in contemporary philosophy represented in Rococo artistic production of this period as well. Taking the proposed devices in context, they help to theorize the complex notions of creative activity in Rococo visual culture. Taken as an episode in the history of communications, they instance the development of conceptions of personhood and of physical forces at stake in the invention of automated media. (shrink)

-/- This article was first published in Technology and Contemporary Life, Philosophy and Technoloy vol. IV, ed. Paul T. Durbin, Dordrecht/Boston: D. Reidel, 1988, pp. 63-85.

The EdTech revolution in India has emerged as a transformative force, particularly during and after the COVID-19 pandemic, when traditional education systems faced unprecedented disruptions. While digital technologies have unlocked new opportunities for teaching and learning, they have also exposed systemic inequities and deepened the existing digital divide. This paper examines how EdTech is reshaping India's education landscape by addressing these challenges, with a focus on both the opportunities it presents and the barriers it creates. The shift to digital learning (...) platforms has empowered students with access to a broader array of learning resources, interactive content, and personalized learning paths. However, millions of students, particularly those from rural areas or lower-income families, struggle to access these resources due to a lack of digital infrastructure, reliable internet connectivity, and affordability of devices. Furthermore, the role of teachers has evolved, requiring new pedagogical approaches and technical skills to effectively harness these digital tools. (shrink)

Disgust is universal to humans across the globe in its broader aspects and localised and individualistic in its specific locus and formations. In general, the emotion of disgust is that it works as an anchor against existential dread, the anxiety of death (angst), and the fear of loss of meaning (abject). It is disgusting to look at rotting bodies or slimy, sticky, throbbing, odorous things because it reminds us of the insignificance of life itself. Objects of disgust are rude organic (...) and cosmic reminders of our very anthropocentric and vainglorious conceptions of the self as Being-in-the-World (In-der-Welt-sein). However, disgust is also deeply embedded with networks of social and political power and is used as a tool in encounters with the other. The other target of this disgust could be from the categories of other gender, race, caste, class, and sexualities. This paper tries to engage with a few of those categories in order to understand how disgust as an emotion has both an existential and socio-political charge in-itself. It then tries to analyse Subimal Mishra’s works through the lens and posits the possibility of using disgust as a literary device. (shrink)

In recent days Augmented Reality is an emerging trend in marketing and sales strategies. Augmented reality ads are immersive, which means they help marketers create a certain emotional connection with customers. Unlike images or banners, for example, AR ads are interactive and lifelike consumers can see and even interact with them. Now-a-days people prefer online shopping rather than the traditional window shopping and Augmented Reality allows brands to give customers unique experiences with the convenience of tapping into their mobile (...) class='Hi'>devices. So the main purpose is to build an “AR Watch Try-On application” is to develop android application for trying different watches in a Virtual way using a mobile which supports AR camera. This application can be used on Online Watch Shopping websites and applications such as Titan, Fastrack, Sonata and so on. The application will eliminate the human efforts by physically visiting the Watch shops which is very time-consuming activity. User can try out multiple watches and different varients of those watches. (shrink)

The Church seeks to be inclusive; one that opens her doors to everyone. For many Filipino Catholics (FCs) in Japan, their ecclesial existence is marked by a history of negotiation as “guests” hosted by the Japanese Catholics (JCs). Within this field of host–guest interplay, this paper explores the dynamics of sociospatial seclusion by employing the ideation of marginality pro ered by Loic Wacquant’s study on urban ghettos. The paper argues that the guest-identity of FCs must not be understood as a (...) unilateral action imposed upon by the dominant hosts against the former’s subjugated narrative as powerless victims. Instead, its maintenance is perpetuated by FCs’ elective and chosen ethnic clustering. In attempt to obtain better analytical clarity of this dynamics, this paper employs the functional value of the Cartesian plane as a mapping device in plotting historical events of interplay within a spatial field. The techne inherent in the Cartesian plane is embedded with the episteme of Wacquant’s ideation. Fused together, its utility as a heuristic device is herewith proposed. It is hoped that this theoretical construct can also be useful to any analysis of marginality contained within a host–guest interplay. (shrink)

In current legal and political atmospheres, when governments are embracing notions such as pollution prevention and the three ”R’s” – reduce, reuse and recycle, while discarding command and control types of regulatory enforcement, some may be surprised to learn that since 1971 Pennsylvania law has permitted the exemption of corporate assets from capital stock valuation for the purpose of paying capital stock taxes, if the assets are devoted to pollution control or abatement. Straightforward though the idea of tax exemption for (...) pollution control assets may seem, the execution of the statutory exemption, together with the regulation which was promulgated thereunder, yields a wide variety of hermeneutic fruit under the scrutiny of the judiciary and the advocacy of lawyers. (shrink)

It is well-known that racism is encoded into the social practices and institutions of medicine. Less well-known is that racism is encoded into the material artifacts of medicine. We argue that many medical devices are not merely biased, but materialize oppression. An oppressive device exhibits a harmful bias that reflects and perpetuates unjust power relations. Using pulse oximeters and spirometers as case studies, we show how medical devices can materialize oppression along various axes of social difference, including race, (...) gender, class, and ability. Our account uses political philosophy and cognitive science to give a theoretical basis for understanding materialized oppression, explaining how artifacts encode and carry oppressive ideas from the past to the present and future. Oppressive medical devices present a moral aggregation problem. To remedy this problem, we suggest redundantly layered solutions that are coordinated to disrupt reciprocal causal connections between the attitudes, practices, and artifacts of oppressive systems. (shrink)

This paper concerns would-be necessary connections between doxastic attitudes about the epistemic statuses of your doxastic attitudes, or ‘higher-order epistemic attitudes’, and the epistemic statuses of those doxastic attitudes. I will argue that, in some situations, it can be reasonable for a person to believe p and to suspend judgment about whether believing p is reasonable for her. This will set the stage for an account of the virtue of intellectual humility, on which humility is a matter of your higher-order (...) epistemic attitudes. Recent discussions in the epistemology of disagreement have assumed that the question of the proper response to disagreement about p concerns whether you ought to change your doxastic attitude towards p. My conclusion here suggests an alternative approach, on which the question of the proper response to disagreement about p concerns the proper doxastic attitude to adopt concerning the epistemic status of your doxastic attitude towards p.Send article to KindleTo send this article to your Kindle, first ensure [email protected] is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about sending to your Kindle. Note you can select to send to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply. Find out more about the Kindle Personal Document Service.HIGHER-ORDER EPISTEMIC ATTITUDES AND INTELLECTUAL HUMILITYVolume 9, Issue 3Allan HazlettDOI: https://doi.org/10.1017/epi.2012.11Your Kindle email address Please provide your Kindle [email protected]@kindle.com Available formats PDF Please select a format to send. By using this service, you agree that you will only keep articles for personal use, and will not openly distribute them via Dropbox, Google Drive or other file sharing services. Please confirm that you accept the terms of use. Cancel Send ×Send article to Dropbox To send this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about sending content to Dropbox. HIGHER-ORDER EPISTEMIC ATTITUDES AND INTELLECTUAL HUMILITYVolume 9, Issue 3Allan HazlettDOI: https://doi.org/10.1017/epi.2012.11Available formats PDF Please select a format to send. By using this service, you agree that you will only keep articles for personal use, and will not openly distribute them via Dropbox, Google Drive or other file sharing services. Please confirm that you accept the terms of use. Cancel Send ×Send article to Google Drive To send this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about sending content to Google Drive. HIGHER-ORDER EPISTEMIC ATTITUDES AND INTELLECTUAL HUMILITYVolume 9, Issue 3Allan HazlettDOI: https://doi.org/10.1017/epi.2012.11Available formats PDF Please select a format to send. By using this service, you agree that you will only keep articles for personal use, and will not openly distribute them via Dropbox, Google Drive or other file sharing services. Please confirm that you accept the terms of use. Cancel Send ×Export citation Request permission. (shrink)